Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
Related
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Marke321 said:
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Click to expand...
Click to collapse
ive managed to enter to emergency mode but now after reset phone step im getting error :WParam : 100 LParam : 2 and nothing... please help!
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Poland_Developers said:
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Click to expand...
Click to collapse
ok , i will try it thanks
Marke321 said:
ok , i will try it thanks
Click to expand...
Click to collapse
doesnt work....
What version had you? ICS or JB?
Poland_Developers said:
What version had you? ICS or JB?
Click to expand...
Click to collapse
Ok first i had ICS then i got jb cm10 it worked normally for couple days ,but when ive downloaded chainfire 3D and installed drivers it doesnt boot! then ive tryed to flash it
**** IT! same error.... now i will try different version of kernel.
I have lg l7 p705 and same problem i stuck on EMERGANCE MODE
If you currently have a Jelly Bean then install Jelly Bean.
Uninstall KDZ Flash Tool + drivers and install again.
1.Install drivers.
2.Install KDZ Flash Tool.
3.Turn off your phone. Connect phone via cable USB and pressing volume + and power (without battery). On screen shows emergency mode with yellow background.
4.Open KDZ and:
a) 3GQCT + EMERGENCY
b) 3GQCT + CS EMERGENCY
Disaster recovery software for LGMobile Support Tool rather not work. But you can check it.
If you have P705 then install for P705:
-Hong Kong or Taiwan: http://lg-phone-firmware.com/index.php?id_mod=13
thanks i will try it
it doesnt work , please help, im losing hope
Hi,
try this it worked for me:
turn the phone off
remove battery
press "volume up"
connect to PC via USB
this is the only way to enbale emergency mode which worked for me
Adam
plenty guides on how to unbrick
Including this one :
Marke321 said:
it doesnt work , please help, im losing hope
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
found here http://forum.xda-developers.com/showpost.php?p=52241564&postcount=19
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
why are you trying to enter emergency mode ?
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
lokopol said:
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
Click to expand...
Click to collapse
i did try it many times till date havent succeeded...
IGGYVIP said:
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
Click to expand...
Click to collapse
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
TonyMatt said:
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
Click to expand...
Click to collapse
is your phone in bootloop ? or does it display blank screen ? (black or white)
did you try to remove sdcard ?
did you try to hard-reset ?
can you try to remove anything related to lg from your pc ? (all programs and drivers)
do you have qmemo button on top of volume buttons ? you can try to enter safe mode (most scripts will not work in this mode so you might get lucky)
@TonyMatt
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .
someone please help..
TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.
shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..
patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.
TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?
Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse
Same problem.
Same problem
now can i go back to fast boot mode?
someone please help..
Same problem, please helpp
Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Schubi_1 said:
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Click to expand...
Click to collapse
Don't be desperate
You installed the baseband of aidasaidas75. I don't know why he made this new baseband, but several people have passed or are going through this situation you are going through right now. Download this file which contains a tutorial that I did (with videos) and follow in the order. Here is the link to download: http://www.mediafire.com/download/puibfc3chbrw2zs/tutorial.rar
Phone was not found!
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Schubi_1 said:
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Click to expand...
Click to collapse
Edit: Have you putted the phone in emergency mode?
iTzMeB1tch3s said:
Edit: Have you putted the phone in emergency mode?
Click to expand...
Click to collapse
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Schubi_1 said:
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Click to expand...
Click to collapse
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
iTzMeB1tch3s said:
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
Click to expand...
Click to collapse
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Schubi_1 said:
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Click to expand...
Click to collapse
you have to leave the screen like this:
View attachment 3716606
If you get put in this way, just connect to your PC and have them install the Stock ROM.
Now, if you could not leave it, try other key combinations to try to enter download mode.
do not give up!!!