Related
My wiz (which I love) has developed a loose usb port. It is out of warranty (of course!), and it is not the first MDA to have this issue (I returned 3 over that past almost 2 years for the usb coming loose). It has not fallen out yet, but charging is a chore, as I need to have my plug in the usb in a special way to get it to connect and charge.
Long story short...
Is there a physical fix I can do on my wiz? Since it is not under warranty, I am not too concerned about taking my MDA apart...so...
Can someone who has had this issue tell me in a step by step manner, how to take the MDA apart and "tighten" the MDA port???
I am hoping to hold out long enough to get the Kaiser...if Tmo ever releases it.
Thank you in advance.
**I have search this forum and even googled...people list sites for $60-100,or say to take the MDA apart and solder it back...I'm broke and wanna go with the second option, but haven't found a step by step about how to actually take the wiz apart and re-solder the usb port**
I'm gonna be unhelpful so if you want to get mad at me, do it now.
I ask what I'm sure others are asking themselves: WHAT have you been doing to your MDAs where the usb port has been getting loose?! Three times?!
I ask not to be embarassing but to help other users from prevent damage to their devices.
Azazello said:
I'm gonna be unhelpful so if you want to get mad at me, do it now.
I ask what I'm sure others are asking themselves: WHAT have you been doing to your MDAs where the usb port has been getting loose?! Three times?!
I ask not to be embarassing but to help other users from prevent damage to their devices.
Click to expand...
Click to collapse
Yes, I am quite pissed at you now...
The first one was a replacement for a crappy refurb they'd sent me, and I sent it back immediately as the port came to me loose. The second one came loose, I believe, just by charging it, syncing it, etc (I went through a phase where I changed OS's every 5 minutes...I am an addict, I admit it). The third one came loose (I suspect) when I was charging it in my car and had to hit the brakes hard, and it went flying to the floorboards. This one I have no clue. It worked fine until 2 days ago. I went to charge it last night and noticed it being VERY tempermental, and a bit loose. I would like to fix it before it gets to the point of being complete crap.
All the rumors say that Tmo USA will be releasing the Kaiser soon, and I really want that phone, and would rather not pay the $100 or so bucks swapping out my MDA through insurance, just to have the Kaiser released 4 days later (Murphy's Law affects me a lot).
So.... Help please!!!!
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
akashastrega said:
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
Click to expand...
Click to collapse
I had this same problem... Slamming on the brakes when your MDA is connected to the car charger is never a good idea...
Trust me when I say this though. I wrecked my Integra GSR swerving to avoid hitting a deer. The impact of the car hitting the curb severed all the contacts on the USB port and now the USB port has fallen out of the phone completely...
So all I need to do is solder those 4 connectors and make sure the port is positioned correctly over those 5 tiny connectors and I should be fine? My soldering skills are somewhat sub-par so I don't want to risk it unless I know exactly what needs to be done before I do it. I'm sure you can understand that though.
PS>> I too am only hoping that I can keep my MDA working long enough to get a Kaiser. I have been saving but am not quite there yet...
dharvey4651 said:
I had this same problem... Slamming on the brakes when your MDA is connected to the car charger is never a good idea...
Trust me when I say this though. I wrecked my Integra GSR swerving to avoid hitting a deer. The impact of the car hitting the curb severed all the contacts on the USB port and now the USB port has fallen out of the phone completely...
So all I need to do is solder those 4 connectors and make sure the port is positioned correctly over those 5 tiny connectors and I should be fine? My soldering skills are somewhat sub-par so I don't want to risk it unless I know exactly what needs to be done before I do it. I'm sure you can understand that though.
PS>> I too am only hoping that I can keep my MDA working long enough to get a Kaiser. I have been saving but am not quite there yet...
Click to expand...
Click to collapse
Well none of my connectors broke...luckily...so on that matter I'm not sure...however, I had my hubby dismantle my MDA (which I won't lie, was a real b*tch...you think you're breaking it) just to when the port was exposed...he then readjusted the 4 connectors then using silver solder and a gun, made 4 pinpoint attachments. Be very careful...he let the gun get too close and slightly melted the plastic down by the battery release tab...no real damage, but if you aren't careful...
Hopefully someone can better answer you about the procedure...as I said, mine had only come loose and didn't actually break yet.
Good luck on the Kaiser...I'm saving too!!!
akashastrega said:
Well none of my connectors broke...luckily...so on that matter I'm not sure...however, I had my hubby dismantle my MDA (which I won't lie, was a real b*tch...you think you're breaking it) just to when the port was exposed...he then readjusted the 4 connectors then using silver solder and a gun, made 4 pinpoint attachments. Be very careful...he let the gun get too close and slightly melted the plastic down by the battery release tab...no real damage, but if you aren't careful...
Hopefully someone can better answer you about the procedure...as I said, mine had only come loose and didn't actually break yet.
Good luck on the Kaiser...I'm saving too!!!
Click to expand...
Click to collapse
Thanks. I'm going to take the chance and attempt soldering it back in place and just leave the 5 pin connectors touching where they're supposed to be soldered to. It's already broken and won't even hold a charge right now so really I have nothing to lose. Worst comes to worst, it won't work after I'm done but then again, it doesn't work now.
Wish me luck!!
MDA - HTC Wizard - 8125 Broken USB Port Fix Guide or Repair Manual needed
akashastrega said:
Ok...so I got my hands on the MDA repair manual...and after some head-scratching my husband and I managed to take the wizard apart. Luckily, only the 4 tiny bracket holding the usb port in broke loose, so it was a matter of soldering them back on. My MDA is back to working again. Yay (and whew!)
Click to expand...
Click to collapse
Seems this is a definite design / manufacturing flaw considering ALL of these USB ports seem to break within an unrealistic time frame.
Help please, still looking for MDA /Wizard repair manual. Know where I can find it?? 10Q
Here you are:
http://forum.xda-developers.com/showthread.php?t=259242&page=6#post1083526
Some guys charge this file for US$7.99....- -"
let me know how your repair attempt goes. I'm in the exact same situation. Mine isn't completely broken, but it takes LOTS of fiddling to get it to charge, and I can't get an activesync connection at all. Because it still charges, though, I'm guessing that its not completely broken off which will make my repair job slightly easier....
My USB Repair experience
http://forum.xda-developers.com/showthread.php?p=2012482#post2012482
After droping my x7501 a number of times and allways being able to soft reset my way back to operability, I droped it this morning and it is DEAD.
Soft reset-Nothing
Hard reset- Nothing
Pull Battery-4.01v no help.
Any suggestions before I send it to HTC for repair?
BTW Totaly stock ROM
Thanks
Joe
Cpt_kludge said:
After droping my x7501 a number of times and allways being able to soft reset my way back to operability, I droped it this morning and it is DEAD.
Soft reset-Nothing
Hard reset- Nothing
Pull Battery-4.01v no help.
Any suggestions before I send it to HTC for repair?
BTW Totaly stock ROM
Thanks
Joe
Click to expand...
Click to collapse
If you are not dead poor, buy yourself a new HTC X7510.
Cpt_kludge said:
Pull Battery-4.01v no help.
Joe
Click to expand...
Click to collapse
Sorry to hear it and no, don't get an x7510!
I have no ideas to help but was wondering what Pull Battery is?
Totaly stock ROM
Click to expand...
Click to collapse
That's the problem! No one uses the stock ROM!!! Your poor device probably got so depressed with it that it gave up and killed itself!
Do you get no lights at all? Even when plugging in to the mains?
@ lakeman
I have no ideas to help but was wondering what Pull Battery is?
Click to expand...
Click to collapse
I assume that means he has pulled the battery out and put it back in - it cures lots of ills...
Im so sorry about your 7501. Yes reseating the battery (taking the battery out and putting it back in) is the first thing Id try after hard reset didnt work. In fact, Id probably try pulling the battery out and in 4 or 5 times as on my unit the battery seems to need to fit just right. If I had a second battery I might swap the battery out just to see what happened. Of course if the 7501 under warrantee I might just ship it back. But if it wasnt under warrantee and your not gett ing any lights when you try to recharge Id suspect a power problem, something isnt connecting right perhaps. If its not under warrantee Id gently shake, rattle? Something bad is loose? Id examine the miniusb connector. Can I see anything abnormal? Does it the connector, move with my finger? When I charge does anything happen when I push on the miniusb cord against the unit . back and forth, hoping lights would come on. No? THen Id probably try taking apart to see what i could see. Especially Id try to look at the left side where the miniusb power connects and id look at where /?the location of the drop/dent for obvious damage. Sorry thats all basic. If under warrantee you might not want to open it up as that might void the warrantee.
Confucious said:
@ lakeman
I assume that means he has pulled the battery out and put it back in - it cures lots of ills...
Click to expand...
Click to collapse
Thats what I eventually concluded but I was wondering if he found a way to resurrect dead batteries!
@ Patratel
Do any lights come on at all when you plug it into a charger/computer?
lakeman said:
@ Patratel
Do any lights come on at all when you plug it into a charger/computer?
Click to expand...
Click to collapse
Patratel probably does as there is nothing wrong with his device.
The OP was Cpt_kludge
Confucious said:
Patratel probably does as there is nothing wrong with his device.
The OP was Cpt_kludge
Click to expand...
Click to collapse
Oops, didn't look far enough down the page
That's my usual trick.
I was going to make some smart alec comment about you being able to get Optimus coverage in Canada but I've just discovered there is a Toronto in Oz - You learn something every day
lakeman said:
Sorry to hear it and no, don't get an x7510!
I have no ideas to help but was wondering what Pull Battery is?
Click to expand...
Click to collapse
Ya, Pulled the Battery and checked the Voltage 4.01v.
Replaced the Battery. All No good.
Planning on sending it in to be evaluated ($28)
May look for another one one as a backup. Right now I have gone back to my Dell X5.
patratel said:
If you are not dead poor, buy yourself a new HTC X7510.
Click to expand...
Click to collapse
Have not been sold on the x7510 yet.
We'll see
Joe
Confucious said:
That's the problem! No one uses the stock ROM!!! Your poor device probably got so depressed with it that it gave up and killed itself!
Do you get no lights at all? Even when plugging in to the mains?
@ lakeman
I assume that means he has pulled the battery out and put it back in - it cures lots of ills...
Click to expand...
Click to collapse
LOL
No, lo lights or anything. I assume the power has been interupted somehow
Pulling the Battery - correct
c1oudrs said:
Im so sorry about your 7501. Yes reseating the battery (taking the battery out and putting it back in) is the first thing Id try after hard reset didnt work. In fact, Id probably try pulling the battery out and in 4 or 5 times as on my unit the battery seems to need to fit just right. If I had a second battery I might swap the battery out just to see what happened. Of course if the 7501 under warrantee I might just ship it back. But if it wasnt under warrantee and your not gett ing any lights when you try to recharge Id suspect a power problem, something isnt connecting right perhaps. If its not under warrantee Id gently shake, rattle? Something bad is loose? Id examine the miniusb connector. Can I see anything abnormal? Does it the connector, move with my finger? When I charge does anything happen when I push on the miniusb cord against the unit . back and forth, hoping lights would come on. No? THen Id probably try taking apart to see what i could see. Especially Id try to look at the left side where the miniusb power connects and id look at where /?the location of the drop/dent for obvious damage. Sorry thats all basic. If under warrantee you might not want to open it up as that might void the warrantee.
Click to expand...
Click to collapse
It is <1yr old. No Lights and nothing rattling when I shake it Hooking up the USB power still gets nothing and activesync does not see it. No clue on damage as there is no outside damage. Might be as simple as somthing inside becoming disconnected. or as bad as a PWB broken.
Thanks for the input
Joe
It is <1yr old
Click to expand...
Click to collapse
Is it covered by a warranty?
Confucious said:
Is it covered by a warranty?
Click to expand...
Click to collapse
Not sure as I bought it used.
When I first got my x7501 the Bluetooth did not work so I sent it in and it was repaied under warentee. This was last March.
Cpt_kludge said:
Not sure as I bought it used.
When I first got my x7501 the Bluetooth did not work so I sent it in and it was repaied under warentee. This was last March.
Click to expand...
Click to collapse
Then surely the first thing to try is a warranty claim?
Sorry not to have followed up on this.
I did send it into HTC and ....wonder of wonders....They repaired it under warentee. I told them I dropped it and they STILL repaired it. Been working fine ever since.
I just picked up a backup unit off of ebay. I DO love this unit
I fear a sad day will come soon when my x10 will be unusable. The main current problems are broken in-ear speaker, meaning i have to use speakerphone or bluetooth for calls, and charging the phone has become a pain after while being plugged in to my laptop and falling off the side it has to be maneuvered to one direction to stay on. Luckily i have an upgrade due soon but i dont want use it until the right phone comes out, and especially with gingerbread coming soon.
I dont drop it often and im sure an iphone wouldve perished under the same conditions which is why i hope to keep it alive as long as possible, has anyone ever fixed any of these problems by any chance?
have you tried CPR?
jk..
if its hardware related try to bring it to your service center. maybe your warranty will cover it.
here's the x10 disassembly guide
http://forum.xda-developers.com/showpost.php?p=6368979
here's the video
http://forum.xda-developers.com/showthread.php?t=989196
maybe a lose connection to your earpice
can i have your stuff?
-PiLoT- said:
can i have your stuff?
Click to expand...
Click to collapse
Let us pray now..
Perhaps book it into a hospital such as "shudder" the SE service centre.
Here you are maybe you could do this...
smartgardens said:
Here you are maybe you could do this...
Click to expand...
Click to collapse
HA HA HA!!!
No offense to OP the thread just turned out funny.
The truth is smartphones should not be dropped.
not to sound like a heatless bastard, but if it does die, would you be willing to sell me the USB board? if you are, PM me
lansingone said:
not to sound like a heatless bastard, but if it does die, would you be willing to sell me the USB board? if you are, PM me
Click to expand...
Click to collapse
The usb is soldered to the main PCB.
there's a separate PCB board with the USB connected to it http://2.bp.blogspot.com/-tGMqxM4Nj...MDCZo/s1600/Droidangel_XperiaX10_Charging.jpg
lansingone said:
there's a separate PCB board with the USB connected to it http://2.bp.blogspot.com/-tGMqxM4Nj...MDCZo/s1600/Droidangel_XperiaX10_Charging.jpg
Click to expand...
Click to collapse
Check again.
warranty is a no go as a very brief splash coloured the water damage area, im not sounding like i look after it very well but i have had it 18 months now, il get back to any of you if it does give up eventually. I did laugh at those pics though, no offence taken.
woke up today to 3 blinks if the red led, thought it was over but after a little stint in the wall charger, it started to charge again, whew, close call, ironically today is the first day i can upgrade.
Why don't you upgrade then ? Do you like the Arc or other phones ? If you are fond of the phone, I'm sure you can find a shop that can fix the issues cheap if you care to wait a day or so, maybe even faster.
Anyway, just to be sure, make a backup of your contacts and photos while you still can.
i actually have upgraded now, wanted to wait and see what the duo was like but even when i managed to get the battery to 100% it was flat in 6 hours, most of the time in my pocket (i can usually get a full day out of it) Went with the arc, love the design and hopefully it will be updated better than the x10 was.
Last week when charging my phone, it slipped off my desk and something happened inside the phones USB port. The little metal contact was moved out of place. I could still charge, but it had to be at a certain angle and if I picked it up it stopped charging.
And this morning, I broke it even more. I dropped it into a bowl of milky cereal. I didn't think it would be too bad. I wiped it down and I've been using it fine all day at college. But I've just got home and went to test if it still charged. On my own little USB cord I had from elsewhere it didn't work, but on the official LG one it worked after a LOT of shuffling around and changing the angle.
I'm gonna leave it as it is to make sure it doesn't stop charging, because I don't have a wireless charger handy.. I would also prefer to get the official orb from Google, because I don't want to spend a lot of money of something that doesn't work very well.
I was wondering if there is a way to fix this myself, or can I get a replacement from Google/LG?
Good lord your phone is in very bad hands
Sent from my Nexus 7 using Tapatalk HD
Dragooon123 said:
Good lord your phone is in very bad hands
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I'm actually quite careful with my phone! It's just very smooth and slippery..
I would call them and tell them it no longer charges.
See what they say. Worst thing they do is say not covered.
I would omit the milk and dropping parts.
tweaked said:
I would call them and tell them it no longer charges.
See what they say. Worst thing they do is say not covered.
I would omit the milk and dropping parts.
Click to expand...
Click to collapse
So if I just say it's stopped charging, they might be kind a send a replacement without any hassle? Or would I have to return the device?
There is no need to leave a post in the respective thread if you are reporting something. Please stick to the topic guys.
http://www.fasttech.com/products/1197502
Includes FREE worldwide shipping. Is this too good to be true? I'm keen to give it a shot, but can't seem to find a brand-name or anything. According to the seller its compatible with our phones, but I'm always sceptical of no-name-brand Chinese things, especially if it could damage my precious.
Don't think its branded at all. Their return policy seems pretty good. Seems as though you would only have to pay for shipping if it's not an error on their part. I assume DOA's and the thing breaking down within the warranty period would constitute as free return paid by them. Post a review if u decide to try it.
I received mine today but for some reason I only seem to get 94% charged and won't go above it... I'm still trying to find if anyone else is having this same issue but nothing at present...
Some of us on xda ordered some it's some post down from this one they said they got and it works I'll get mines tomorrow. I ordered it on the 7 of January
Sent from my Nexus 4 using xda app-developers app
Unlike the other one, this one (for $35) seems to be one of the WPC certified chargers, although I am not sure if it means much.
Link to WPC site: http://www.wirelesspowerconsortium.com/products/details/125/qi-wireless-charging-pad
Link to manufacturer site: http://www.uway-qi.com/Productsshow.asp?ID=32
mband said:
I received mine today but for some reason I only seem to get 94% charged and won't go above it... I'm still trying to find if anyone else is having this same issue but nothing at present...
Click to expand...
Click to collapse
Is the blue light overly bright and annoying? Are there beeping sounds? Is it easy to get it to charge, or does it only charge when placed in a certain way?
Sorry for the barrage of questions, I'm thinking of getting one of this if it works.
Placed my order. Figured its worth the risk at that price.
Unfortunately I'm in South Africa so I don't expect it to arrive in less that 2 weeks.
Sent from my Nexus 4 using Tapatalk 2
innumerabilis said:
Is the blue light overly bright and annoying?
Click to expand...
Click to collapse
The green light has been annoying me more to say it has power, the blue one is covered by the phone when it's charging.
Are there beeping sounds?
Click to expand...
Click to collapse
There is a beep to alert you when the phone is placed on it and to advise of charging.
Is it easy to get it to charge, or does it only charge when placed in a certain way?
Click to expand...
Click to collapse
The phone needs to be placed upside down, in the case of the N4 the bottom of the phone is towards the power plug end of the Qi.
I'm thinking of getting one of this if it works.
Click to expand...
Click to collapse
I've been looking around for something else. Seems to be once above 94% it won't charge anymore. Charging via USB works fine to 100%.
Sorry for the barrage of questions,
Click to expand...
Click to collapse
No problem
What about the charging range? Is it any good?
Because on other Qi chargers, a lot of people complained that they lose connection when knocked a centimetre off centre.
gqukyo said:
Don't think its branded at all. Their return policy seems pretty good. Seems as though you would only have to pay for shipping if it's not an error on their part. I assume DOA's and the thing breaking down within the warranty period would constitute as free return paid by them. Post a review if u decide to try it.
Click to expand...
Click to collapse
I ordered one, for 27€ it's worth a try. Will probably open it up and dim the leds a bit.
There we go I like this price I think i can chance I can gamble for that type of money.
Sent from my Nexus 4 using Xparent Blue Tapatalk 2
wywywywy said:
What about the charging range? Is it any good?
Click to expand...
Click to collapse
You can move it around a bit but not too much, it'll work sideways, longways, etc. and I've also got a case on without an issue.
Maybe once you remove your case, it will charge over 94%.
I am just kidding.
Considering ordering one.
Thanks.
mband said:
You can move it around a bit but not too much, it'll work sideways, longways, etc. and I've also got a case on without an issue.
Click to expand...
Click to collapse
Has anyone looked at the one labeled just "Qi Wireless Charger"?
It's white, and I don't like that, but it's completely flat, so it'd probably fit the phone better...?
Better as in, if you have to turn it around, then it'd be better, since with the large one, the casing seems to be raised at the top, whereas the standard one is completely flat, so flipping it around wouldn't really be that big of a deal.
random1204 said:
Has anyone looked at the one labeled just "Qi Wireless Charger"?
It's white, and I don't like that, but it's completely flat, so it'd probably fit the phone better...?
Better as in, if you have to turn it around, then it'd be better, since with the large one, the casing seems to be raised at the top, whereas the standard one is completely flat, so flipping it around wouldn't really be that big of a deal.
Click to expand...
Click to collapse
seems good, the title says it all
US plug / works with all Qi capable devices inc. Nexus 4 & Nokia 920T/820T
Click to expand...
Click to collapse
More info in this thread already started about the fasttech Qi chargers http://forum.xda-developers.com/showthread.php?p=36093590
Sent from my Nexus 4 using Tapatalk 2
dk20005 said:
More info in this thread already started about the fasttech Qi chargers http://forum.xda-developers.com/showthread.php?p=36093590
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
This is not the same charger as the one being discussed in that other thread.
To repeat the OP, this is the charger discussed here:
http://www.fasttech.com/products/1197502
Mine arrived today. My early thoughts:
1.) It feels pretty cheaply made, but its a simple device and I can't really fault anything about it as far as build quality goes.
2.) The Nexus 4 has to be placed upside down for charging to take place. Bit of a shame, but no reason why you can't just use the pad itself upside down instead.
3.) Unlike the comments from another poster here, I was relieved to see my phone charge to 100% without any problems.
4.) The flashing blue LED is annoying and doesn't seem to do anything other than flash continually whether it is charging or not. I'll probably open it up and kill it, and/or simply tape over it with black tape.
All in all, pretty happy for the price paid, and glad to be able to reduce the wear and tear on the microUSB port.
StNickZA said:
This is not the same charger as the one being discussed in that other thread.
To repeat the OP, this is the charger discussed here:
http://www.fasttech.com/products/1197502
Mine arrived today. My early thoughts:
1.) It feels pretty cheaply made, but its a simple device and I can't really fault anything about it as far as build quality goes.
2.) The Nexus 4 has to be placed upside down for charging to take place. Bit of a shame, but no reason why you can't just use the pad itself upside down instead.
3.) Unlike the comments from another poster here, I was relieved to see my phone charge to 100% without any problems.
4.) The flashing blue LED is annoying and doesn't seem to do anything other than flash continually whether it is charging or not. I'll probably open it up and kill it, and/or simply tape over it with black tape.
All in all, pretty happy for the price paid, and glad to be able to reduce the wear and tear on the microUSB port.
Click to expand...
Click to collapse
Why does it have to be upside down?
AshtonTS said:
Why does it have to be upside down?
Click to expand...
Click to collapse
Sorry, when I say "upside down", I don't mean face-down. Rather, the charging port needs to be at the top. Obviously that's where the sensor / coil lines up best with the phone; can't think of any other reason.
FYI, use the code "LAUNCH" for 5% off. Credit goes to samlikely in another thread for this.
With this coupon, this charger comes to $33.13 shipped!