hi guys i wanted to transfer some music to my sgs 4 but im facing the problem when i conect my phone folder appears galaxy s4 and nothing more no folders :S the phone shows thats charging im on goldeneye rome usb debuging enabled pc windows 8.1
DangerousB said:
hi guys i wanted to transfer some music to my sgs 4 but im facing the problem when i conect my phone folder appears galaxy s4 and nothing more no folders :S the phone shows thats charging im on goldeneye rome usb debuging enabled pc windows 8.1
Click to expand...
Click to collapse
With the latest versions of Android, USB Mass Storage has been disabled. You might want to try the USSD code *#7284# as described here:
http://blog.vacs.fr/index.php?post/2010/12/24/How-to-repair-the-USB-not-detected-problem-on-Android-Samsung-phones
i know that mass storage is disabled. My pc don't even detect my galaxy s4 i tried to install new drivers and i get the device setup loading and stuck at that :S
DangerousB said:
i know that mass storage is disabled. My pc don't even detect my galaxy s4 i tried to install new drivers and i get the device setup loading and stuck at that :S
Click to expand...
Click to collapse
Press key windows + R and write devmgmt.msc and press ENTER. Take a look if in some USB driver you have a yellow triangle :fingers-crossed:
Joku1981 said:
Press key windows + R and write devmgmt.msc and press ENTER. Take a look if in some USB driver you have a yellow triangle :fingers-crossed:
Click to expand...
Click to collapse
it shows like Samsung android ADB interface
EDIT: it works now i typed *#0808# and i choose mtp only it worked after i rebootet the phone
DangerousB said:
it shows like Samsung android ADB interface
EDIT: it works now i typed *#0808# and i choose mtp only it worked after i rebootet the phone
Click to expand...
Click to collapse
You dont need do that. Guide: HERE
Joku1981 said:
You dont need do that. Guide: HERE
Click to expand...
Click to collapse
what i get with this adb fastboot? i my phone like media device that i can transfer music on it
Related
Ok so here's the thing. This morning when I woke up I dropped my phone on the floor and the battery flew out.Initially I thought it was nothing but later it started rebooting without any good reason. I tried restarting, it would stay on for a bit then it would go down again. I am(was) running CyanogenMod 7 on a Samsung Galaxy SI. I want to reflash it with Odin as it won't start anymore.At first it would just boot loop but now it won't even get past the first logo. The tricky part is that my PC won't recognize it , all I get is Unknown Device code 43 yada yada BS! I tried alot of drivers, I tried the have disk method with the usb driver from SDK Tools , nothing worked ! Please, give me some suggestions about what I should try more because honestly this is beyond my expertise in this domain.
androis said:
The tricky part is that my PC won't recognize it , all I get is Unknown Device code 43 yada yada BS!
Click to expand...
Click to collapse
unknown USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Tried those options, still Unknown Device. More suggestions ?
androis said:
Tried those options, still Unknown Device. More suggestions ?
Click to expand...
Click to collapse
code 43, has more to do with Hardware, its about your cable and PC ...so check cable, try switch to another USB port
Microsoft engineers answer
I suggest that you connect the Controller to a different USB port and check if you have the same issue.
If this does not work, you can try to uninstall and reinstall the USB controller.
To remove and reinstall all USB controllers, follow these steps:
1. Click Start, type Device manager and open device manager.
2. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
3. Restart the computer, and then reinstall the USB controllers.
Disable and enable the USB device:
1. Click on start and type devmgmt.msc.
2. Right click on the caution sign on the USB.
3. Select disable and reboot the computer.
4. Enable the device after reboot.
Also make sure that you download and install the latest version of Software for this. Here is a link you can follow to download the Software:
http://www.microsoft.com/hardware/download/download.aspx?category=Gaming
Thanks,
Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think.
Click to expand...
Click to collapse
Nothing worked. I even tried going to another PC but still I get unknown device... Is it still worth the struggle or should I just save up for a new phone ?
androis said:
Nothing worked. I even tried going to another PC but still I get unknown device... Is it still worth the struggle or should I just save up for a new phone ?
Click to expand...
Click to collapse
try and borrow another original samsung USB cable to test first, this is a major culprit, as numerous people including myself have experienced
what happens is one of the pins on the micro usb plug of rolls in and gets broken , also check your USB slot a good cleaning with a brush and alcohol would be good fro the connection ( do it when you have removed battery)
Got another USB cable still nothing... It's very weird, it's like nothing I heard off or read on the forums... Is there any method of connecting to the mobile using SDK manager ? I'm not really familiar to working with the SDK manager.
androis said:
Got another USB cable still nothing... It's very weird, it's like nothing I heard off or read on the forums... Is there any method of connecting to the mobile using SDK manager ? I'm not really familiar to working with the SDK manager.
Click to expand...
Click to collapse
was your cable an original samsung cable, IF not, many common cable do not work, due to pin configurations
For ADB, you still need connection with USB cable
Here's another thing I could try. If I go to Device Manager - Right Click on Unknown Device - Update Driver Software - Browse I can choose from a list of Samsung Drivers... The question is , which one do I have to choose for my Galaxy S ? Maybe it will work like this
androis said:
Here's another thing I could try. If I go to Device Manager - Right Click on Unknown Device - Update Driver Software - Browse I can choose from a list of Samsung Drivers... The question is , which one do I have to choose for my Galaxy S ? Maybe it will work like this
Click to expand...
Click to collapse
that was the solution given in my first post, have you not tried them all yet? samsung drivers were also attached on it and what PC software do you use XP or ?
In that link it requires your phone to be working and able to go in USB mass storage mode or debugging mode ... My phone can only stay in download mode . I use windows 7 x64 version .
androis said:
In that link it requires your phone to be working and able to go in USB mass storage mode or debugging mode ... My phone can only stay in download mode . I use windows 7 x64 version .
Click to expand...
Click to collapse
I think you have misunderstood it, there are many solutions mentioned there in, cause I am the one who wrote it ..your option was to try them all to see which one solved it
for win 7 . download this driver http://www.4shared.com/zip/0LQRmsMm/usb_driver.html and give it a go, if the other failed
Tried everything from your guide...even from the microsoft sites...Still can't get my device to be recognized...If I use the Usb driver you sent it won't let me use them even if I manually choose it for my device. Don't really know what to do more honestly other than throw it away and get another phone
http://cagnazzo.name/drupal/vista_corrupted_driverstore
Try the above, then install the Samsung drivers and then connect your device.
androis said:
Tried everything from your guide...even from the microsoft sites...Still can't get my device to be recognized...If I use the Usb driver you sent it won't let me use them even if I manually choose it for my device. Don't really know what to do more honestly other than throw it away and get another phone
Click to expand...
Click to collapse
problem is, its not the phone but its either, the micro USB slot or cable or your PC, if you have another USB cable and a lap top or a friends PC might be able to resolve your problem
Im really sorry if this ins the right place for this question, but i cant find the solution...
I just got a new Galaxy S4 SHG-l337 AT&T ( MF3...) and when i try to use the USB to connect on my computer it gets recognized as a modem. Kies cant find it too... i tryed kies air and i works fine... I tried to unnistal all samsung usb drivers and reinstal it manually from the website, no luck either.
I want to open my S4 as a did to my S2, as a portable device with folders...
What i need to do?
Thanks in advance!
OBS: USB Debugging is checked
MrTesch said:
Im really sorry if this ins the right place for this question, but i cant find the solution...
I just got a new Galaxy S4 SHG-l337 AT&T ( MF3...) and when i try to use the USB to connect on my computer it gets recognized as a modem. Kies cant find it too... i tryed kies air and i works fine... I tried to unnistal all samsung usb drivers and reinstal it manually from the website, no luck either.
I want to open my S4 as a did to my S2, as a portable device with folders...
What i need to do?
Thanks in advance!
OBS: USB Debugging is checked
Click to expand...
Click to collapse
Did you unlock you home screen from you GS4 and tap 'configure' option in the notifications bar?
zjhehe said:
Did you unlock you home screen from you GS4 and tap 'configure' option in the notifications bar?
Click to expand...
Click to collapse
Yes i did unlock the screen, but there was no configure options at my notification bar =/
By the way... im not using a SIM card on the phone yet...
This is what i have:
SAMSUNG_android ( Modem)
If i open it i have:
- SAMSUNG Android ADB Interface
- SAMSUNG Mobile USB CDC Composite Device
- SAMSUNG Mobile USB Modem
- SAMSUNG Mobile USB Serial Port (COM3)
- SAMSUNG Mobile USB Serial Port (COM4)
Am i missing anything? i tried to install the USB driver manually too... no luck
MrTesch said:
This is what i have:
SAMSUNG_android ( Modem)
If i open it i have:
- SAMSUNG Android ADB Interface
- SAMSUNG Mobile USB CDC Composite Device
- SAMSUNG Mobile USB Modem
- SAMSUNG Mobile USB Serial Port (COM3)
- SAMSUNG Mobile USB Serial Port (COM4)
Am i missing anything? i tried to install the USB driver manually too... no luck
Click to expand...
Click to collapse
Not sure which driver you tried to install, but I would probably manual install it even though it was plug and play for me and probably most other GS4 users. I found the Samsung's AT&T page and the driver download link but I can't post links yet because of, well, my post count. If you do a search of "Galaxy S4 SHG-l337 driver", you get a "Support - AT&T...." link (should be first one) that links you to a Samsung.com domain. Go there, scroll down, and hit the "Downloads" tab and install that driver.
zjhehe said:
Not sure which driver you tried to install, but I would probably manual install it even though it was plug and play for me and probably most other GS4 users. I found the Samsung's AT&T page and the driver download link but I can't post links yet because of, well, my post count. If you do a search of "Galaxy S4 SHG-l337 driver", you get a "Support - AT&T...." link (should be first one) that links you to a Samsung.com domain. Go there, scroll down, and hit the "Downloads" tab and install that driver.
Click to expand...
Click to collapse
Thats the driver that i installed manually... Tried again, but nothing yet =/
MrTesch said:
Thats the driver that i installed manually... Tried again, but nothing yet =/
Click to expand...
Click to collapse
Go to control panel -> programs -> uninstall a program
when the list is displayed, see if something that is called "SAMSUNG USB Driver for Mobile Phones" is installed, if not, then chances are you need that. If it is installed, then see if you can get your hands on another cable, could just be a faulty cable.
Hi guys , my android is not shown when i connect with the usb cable because i dont have any drivers , but when i try to install this drivers virsion 1.5.29.0 i get error
"The mobile phone is in use. to installl normally, you need to remove the device and restard the computer. Please run the samsung usb driver for more mobile phones installer again after restarting" thats the error i get when i try to install the drivers and the phone is not even connected.
AndroidFanuser said:
Hi guys , my android is not shown when i connect with the usb cable because i dont have any drivers , but when i try to install this drivers virsion 1.5.29.0 i get error
"The mobile phone is in use. to installl normally, you need to remove the device and restard the computer. Please run the samsung usb driver for more mobile phones installer again after restarting" thats the error i get when i try to install the drivers and the phone is not even connected.
Click to expand...
Click to collapse
1. go to programs, uninstall anything with samsung, kies including.
2. restart pc
3 install samsung drives
4. ask someone to move the thread to Q&A section.
5 99883354
spamtrash said:
1. go to programs, uninstall anything with samsung, kies including.
2. restart pc
3 install samsung drives
4. ask someone to move the thread to Q&A section.
Click to expand...
Click to collapse
Still same error while trying to install the drivers
AndroidFanuser said:
Still same error while trying to install the drivers
Click to expand...
Click to collapse
one more: go to control panel -> device manager. If you see anything like samsung, android phone etc (check the usb tree there) - delete it (uninstall drivers) and reset PC.
spamtrash said:
one more: go to control panel -> device manager. If you see anything like samsung, android phone etc (check the usb tree there) - delete it (uninstall drivers) and reset PC.
Click to expand...
Click to collapse
I see samsung just when i connect my phone , i deleted it still the same... Cant install new drivers it says that mobile in use
AndroidFanuser said:
I see samsung just when i connect my phone , i deleted it still the same... Cant install new drivers it says that mobile in use
Click to expand...
Click to collapse
If you uninstalled Kies/3 and you deleted/uninstalled the drivers too:
1. Go to Menu Start of Windows or press Windows Key + R.
2. Write there %appdata% and press ENTER
3. Delete there the SAMSUNG folder
4. Follow this guide: HERE
5. Enjoy :highfive:
Joku1981 said:
If you uninstalled Kies/3 and you deleted/uninstalled the drivers too:
1. Go to Menu Start of Windows or press Windows Key + R.
2. Write there %appdata% and press ENTER
3. Delete there the SAMSUNG folder
4. Follow this guide: HERE
5. Enjoy :highfive:
Click to expand...
Click to collapse
i dont know what to do man still same error , but when i launch it now i see that the samsung usb driver for mobile phone are installed and it says if i want to keep the install anyways? but i unistalled it i cant find any memory of samsung drivers in my pc
AndroidFanuser said:
i dont know what to do man still same error , but when i launch it now i see that the samsung usb driver for mobile phone are installed and it says if i want to keep the install anyways? but i unistalled it i cant find any memory of samsung drivers in my pc
Click to expand...
Click to collapse
Press ctrl+alt+supr and see if you have runing any Samsung/Kies process and close it.
Joku1981 said:
Press ctrl+alt+supr and see if you have runing any Samsung/Kies process and close it.
Click to expand...
Click to collapse
nope nothing i see there usb 3.0 monitor nothing belong to samsung there
I have Samsung USB Drivers installed,Kies installed,and when I connect my phone to my pc with the usb cable(original) it gives an error that windows couldn't recognize my device,I can flash stuff with odin but it just won't let me acces my phone's storage from my computer.It also doesn't show me that popup with MTP thing when I connect it.I have windows 7 x64
calinoii said:
I have Samsung USB Drivers installed,Kies installed,and when I connect my phone to my pc with the usb cable(original) it gives an error that windows couldn't recognize my device,I can flash stuff with odin but it just won't let me acces my phone's storage from my computer.It also doesn't show me that popup with MTP thing when I connect it.I have windows 7 x64
Click to expand...
Click to collapse
1. Conect ur phone to ur pc
2. Press Windows key + R
3. Write devmgmt.msc and press enter
4. Make a screenshot and show me how many yellow admirations do u have there
Joku1981 said:
1. Conect ur phone to ur pc
2. Press Windows key + R
3. Write devmgmt.msc and press enter
4. Make a screenshot and show me how many yellow admirations do u have there
Click to expand...
Click to collapse
here
calinoii said:
here
Click to expand...
Click to collapse
- Disconect ur phone.
- Rename the file attached for .exe
- Install it
- Make me a new screenshot of the "devmgmt.msc" when u finish the installation.
- Install the Windows 7 updates too then.
Joku1981 said:
- Disconect ur phone.
- Rename the file attached for .exe
- Install it
- Make me a new screenshot of the "devmgmt.msc" when u finish the installation.
- Install the Windows 7 updates too then.
Click to expand...
Click to collapse
Installed that intel thingy but no luck and now windows updates for me (I have a modded windows to don't make updates)
EDIT: So I managed to do the updates (like 160 updates) and it took around 5 hours ) still no luck,here is the print and I do not have any yellow exclamation marks anymore
anyone? please? I really need help
Hi guys. I tried to transfer my files to the computer but when I connect my phone recognizes for a moment and then just stays charged. Try mounted via Recovery partition but does not recognize it. I put the phone in Bootloader mode and the display says I'm connected via USB but when trying to run the cmd command window tells me that no connected phone. Please help. I CM 13
did u first install moto usb drivers?
Did you try to change the USB settings? i.e. touch and drag the notification bar down and select "Transfer files (MTP)"?
kos25k said:
did u first install moto usb drivers?
Click to expand...
Click to collapse
If I have installed the drivers but still does not work
Sirob said:
Did you try to change the USB settings? i.e. touch and drag the notification bar down and select "Transfer files (MTP)"?
Click to expand...
Click to collapse
The problem is that any notification does not appear. I tried another USB cable with another pc and I have not been lucky.
lestersaenz said:
The problem is that any notification does not appear. I tried another USB cable with another pc and I have not been lucky.
Click to expand...
Click to collapse
Then you must check your mobile usb jeck might be their is Fault in it, you need to visit Service center or to local care ( service centre charge 1200Rs ) to change it.
I Faced Same Problem Earlier .