Database Users

Experiences with Froyo I9000JPJPG Middle East (Latest release November 2010)

I am going to flash the latest froyo available for Middle East and then afterwards share my experiences about
1. Stock Rom
2. Speed/ Lag
3. GPS Connectivity
4. Any new Features
5. Battery Drain
In mean while if any one got his/her hands on this Latest Froyo (November 2010) release, please share???

nasgilani said:
I am going to flash the latest froyo available for Middle East and then afterwards share my experiences about
1. Stock Rom
2. Speed/ Lag
3. GPS Connectivity
4. Any new Features
5. Battery Drain
In mean while if any one got his/her hands on this Latest Froyo (November 2010) release, please share???
Click to expand...
Click to collapse
Its African/ Arabic Firmware but there is one latest Froyo (ADJP5) other region

what do u mean the latest one i found was jpjpf i think that that will be the official froyo for middle east. try it and tell me what you think i wll also flash it too

I already flash this Rom there is not much difference between jpjpf and jpjpa both are arabic/farsi roms.so far I could not experience a considerable item in this new rom.

taha_e said:
I already flash this Rom there is not much difference between jpjpf and jpjpa both are arabic/farsi roms.so far I could not experience a considerable item in this new rom.
Click to expand...
Click to collapse
I have better GPS connection after JPJPG(OFFICIAL through kies)
Sent from my GT-I9000 using XDA App

For Market: In phone dialer enter *#272*IMEI# . This wilk give u option to change from XSS to XSG, xsg has market enabled, by doing so you phone will reset, IMEI is number for you mobile handset, XSG is universal
OR
use attached market apk for XSS mobile, use Clockwork mode to "install from zip file" if you dont have Clock work mode, rename the zip to "update" and apply in Recovery

Battery is not draining that quickly but wifi sucks
Sent from my GT-I9000 using XDA App

JPJPG is available through Kies aswell, If you are on JPJPA, flash back to JPJG8 and connect your mobile to Kies, It will offer you JPG upgrade, Before flashing back you need to backup your data/ sms/call logs etc and then flash back

Quick questions guys:
Just got 2.2 through Kies. I now need to re-download my apps, over 90% of them are not showing through the market, not even through search. Im guessing I have to change again to XSG like I did when I had 2.1, then root again as well to enable Market Enabler and access paid apps like I used to (which I did with Ryanza)
1. Old XSG access code (HHMM) gets rejected, new code IMEI gets rejected,is there a way to enable this without flashing etc (i'm a very low-tech person)
2. How do I root this phone, Ryanza's, the only step by step guide I got for this was based on downloading odin with root kernel for JPH, as you know we are running on jpjpg.
3. Are you guys experiencing lags? I'm not so far.
Would really appreciate your help, with easy shortcuts. Never used odin ..etc...but was willing to give it a try until i noticed the different kernel code.
Thanks!

I Upgraded to Froyo Through Kies. The build number is JPJPG.
The App Drawer has major lag when changing pages. It was much faster with the stock Eclair rom. GPS is still the same, it was not fixed at all. I have not noticed any improvement in Battery life either.
2. How do I root this phone, Ryanza's, the only step by step guide I got for this was based on downloading odin with root kernel for JPH, as you know we are running on jpjpg.
Click to expand...
Click to collapse
Use this, worked fine with me:
http://forum.xda-developers.com/showthread.php?t=803682

Thanks! Was able to root my phone. But still can't use Market Enabler, it require SU APP + busybox. Any idea what are these and easy was to install?

Hi:
I updated my european SGS through kies last week, but i cant become root now...
Its posible for now become root and how?
Thanks in advance
Sent from my GT-I9000 using XDA App

I also got the update through Kies last friday, nov 19th. My phone had the 3 button recovery issue, I found a fix here on xda (will get the link later, its bookmarked on another pc)
I also installed voodoo lagfix PRE6, and the phone is working like a charm, highest Quadrant score 1510. After installing voodoo lagfix, rooting is so easy. Just install superuser from the market, and bingo.
So I can confirm that JPJPG works fine with:
- Voodoo lagfix project-voodoo.org
- Flashing the boot loader to fix the 3 button recovery issue
- rooting
Need to ask a question, can anyone please backup the stock ROM and upload it somewhere? in case I ever need to go back to stock, I stupidly forgot to take a backup

melharty said:
I also got the update through Kies last friday, nov 19th. My phone had the 3 button recovery issue, I found a fix here on xda (will get the link later, its bookmarked on another pc)
I also installed voodoo lagfix PRE6, and the phone is working like a charm, highest Quadrant score 1510. After installing voodoo lagfix, rooting is so easy. Just install superuser from the market, and bingo.
So I can confirm that JPJPG works fine with:
- Voodoo lagfix project-voodoo.org
- Flashing the boot loader to fix the 3 button recovery issue
- rooting
Need to ask a question, can anyone please backup the stock ROM and upload it somewhere? in case I ever need to go back to stock, I stupidly forgot to take a backup
Click to expand...
Click to collapse
To backup stock rom, you need Rom manager premium, It will install clockwork mode recovery, let me know If you have issues with that. Rom manager premium is paid but crack is available at blackdroid.net
Lgfix: I am using Universal lagfix (last option**No-RFS Overkill JFS: turns on all options: everything is jfs+ext2 and /data/data is bound to /dbdata**), it gives me a quardant score of 2100+
You get ULF from clockwork mode (install Rom Manager*free version* from market and open the app and the 1st option installs CWM) for details see this link http://forum.xda-developers.com/showthread.php?t=734166&highlight=clockwork+mode

fawaz-sgs said:
Quick questions guys:
Just got 2.2 through Kies. I now need to re-download my apps, over 90% of them are not showing through the market, not even through search. Im guessing I have to change again to XSG like I did when I had 2.1, then root again as well to enable Market Enabler and access paid apps like I used to (which I did with Ryanza)
1. Old XSG access code (HHMM) gets rejected, new code IMEI gets rejected,is there a way to enable this without flashing etc (i'm a very low-tech person)
2. How do I root this phone, Ryanza's, the only step by step guide I got for this was based on downloading odin with root kernel for JPH, as you know we are running on jpjpg.
3. Are you guys experiencing lags? I'm not so far.
Would really appreciate your help, with easy shortcuts. Never used odin ..etc...but was willing to give it a try until i noticed the different kernel code.
Thanks!
Click to expand...
Click to collapse
Hi,
I have used CF root using Odin, its takes 3-7 seconds
Download the this file "CF-Root-JPJPA-v1.2-Busybox-1.17.1.zip" from http://forum.xda-developers.com/showthread.php?t=788108
and open Odin 1.3, its better to keep odin and above zip file in one folder, lets say in C:\.......
Unzip this zip in the same folder
Once Odin is open, click PDA to browse (downloaded Unzip file)(CF-Root-JPJPA-v1.2-Busybox-1.17.1) and Now shutdown you mobile (wait till its really off), press Volume down + power+Home simultaneously and bring your mobile in recovery mode, connect it to your computer, you will see 1st box on Odin will change its colour and it will comm 7 or 11
press start, it will reboot your mobile and you are rooted, let me know if you have any issues
For Market , download zip from post 6 and install via Clockwork mode

BLeaCHeR said:
Hi:
I updated my european SGS through kies last week, but i cant become root now...
Its posible for now become root and how?
Thanks in advance
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Hi
what is your firmware name, is it JPO/ JPA or JPJPG? (to check, in dialer type *#1234#) and is your 3 Button combination enabled??? if its not, enable it 1st from here http://forum.xda-developers.com/showthread.php?t=810686
if you have enabled 3 button combo use the method described in previous posts

fawaz-sgs said:
Thanks! Was able to root my phone. But still can't use Market Enabler, it require SU APP + busybox. Any idea what are these and easy was to install?
Click to expand...
Click to collapse
Which root you used, normally all the roots available in these forums install Su and Busybox, check in your apps if you see Busybox
if its not installed re-root the mobile using CF-root, its safe, and method is in above posts or check this thread http://forum.xda-developers.com/showthread.php?t=788108

nasgilani said:
I am going to flash the latest froyo available for Middle East and then afterwards share my experiences about
1. Stock Rom
2. Speed/ Lag
3. GPS Connectivity
4. Any new Features
5. Battery Drain
In mean while if any one got his/her hands on this Latest Froyo (November 2010) release, please share???
Click to expand...
Click to collapse
Waiting for the updates

ApnaDroid said:
Waiting for the updates
Click to expand...
Click to collapse
Under testing, will post tonight

is there a possibility to flash this rom on a jxjg2 baseband version? what code do i use in kies?

Mobile Odin Pro Fails?

Hi,
I got the N7100 on launch day, and rooted using CWM, leaving my phone with a 'custom' recovery, which is noted on the download boot mode.
Now that triangleaway supports the N7100 I thought I would try and get it less dodgy looking which still rooted.
When I ran triangle away, it warned that a custom bootloader / recovery might leave the counter on 1 even after away'ing the triangle...
So I thought I would use mobile Odin Pro to flash stock rom, injecting SU and mobile odin (as i did many times on my note 1).
This failed (using rom N7100XXALJ1_N7100OXXALJ1_BTU) - it verified the MD5 ok, and rebooted into a screen ive never seen before, containing a large blue Android figure with a lightening bolt on his chest. I personally thought he looked a little unhappy as well...
Anyway, first time this happened, i used desktop odin to do a full flash, which fixed it (but increased my custom counter more since I rerooted with CWM+root).
Second time it happened, i fixed it by just re-flashing CWM.
Anyone else had success with Mobile Odin on the N7100 ??? do you think it was the CWM install that it didnt like ?
Im unsure how to flash just the recovery, and am a bit confused between the relationship between the boot image and the recovery one... i wouldnt have expected the recovery image to affect normal boot, but it does.
George
UPDATE - The blue android is actually the mobile odin pro logo... gonna try again and be a little more patient...

...you....fool

Left it 10 mins, and still stuck on blue android screen... gonna try flashing from sd card rather than internal card in case its that...
luckly reflashing cwm6-root-note2.tar from odin fixes it...
Also tried flashing from external sd, and that also failed.
Does anyone know how Chainfire likes issues to be reported?
thanks
George

You can get answer your some question here
http://forum.xda-developers.com/showthread.php?t=1930418

Is that blue android screen not doing anything at all?
I was the one who tested this app prior to its release (on behalf of chainfire who didn't have the phone at that time), I flashed from internal and external without issue.
What is it your flashing exactly? Your not listing it as a OTA/Update.zip are you?
Try to delete the Mobile Odin file off the root of your sd card and open the app again, it will then re-download the files it needs, try it then.

A few other users have reported the exact same problem, and I am pretty sure it will be related to the problem of Triangle Away not always booting up.
Something fishy is still going on with recoveries, and we're not sure what. I can't replicate the problem on my device - at all - so I can't fix it either.
Maybe it has something to do with bootloader version? It seems some people/firmwares have different bootloaders than others and can cause various problems.
What I find strangest is that the Mobile ODIN logo does show up ... that's just weird. Can you use the attached version of Mobile ODIN (its an older version that does not support the Note2) to create a dump file for your device, so I can compare it with the dump files from working devices? It may offer a clue.
EDIT: Download removed, dump made and received.

Dumping...
Hi Chainfire,
Thank you for the response im impressed by your commitment to making our devices better ...
Im doing a dump now [fnarr fnarr] and will make it available to you as soon as its done.
I presume it will be quite large if it takes 30 mins to upload - shall I pm you or email you the dropbox link where i plan to put it?
LennyUK - im flashing what is supposed to be (and in fact is) the latest official rom - i believe its the original shipped rom + an OTA that the UK got. Not sure if it comes from Samsung or its been hacked together from the OTA + original rom. It was downlaoded from sammobile (as i always did with my note 1). Its a tar file (.md5) containing a bunch o f.img files and modem.bin. Im not convinced the N7100 mobile odin flash kernel was corrupted - i would expect CF does a checksum of some sort... ill await his response to my dump.
ps. Why doesnt XDADevelopers email notification work
cheers
George
Chainfire said:
A few other users have reported the exact same problem, and I am pretty sure it will be related to the problem of Triangle Away not always booting up.
Something fishy is still going on with recoveries, and we're not sure what. I can't replicate the problem on my device - at all - so I can't fix it either.
Maybe it has something to do with bootloader version? It seems some people/firmwares have different bootloaders than others and can cause various problems.
What I find strangest is that the Mobile ODIN logo does show up ... that's just weird. Can you use the attached version of Mobile ODIN (its an older version that does not support the Note2) to create a dump file for your device, so I can compare it with the dump files from working devices? It may offer a clue.
Click to expand...
Click to collapse

Dump
Hi,
Here is the dump ...
thanks
George
EDIT: Dump received and removed, thanks.

had the same problem when trying to flash the exchange hack.
used pc odin to upload CWM and this made my phone boot again

Hi, for the record, i tried triangleaway, and ... it booted into it OK, and ran the procedure to reset the counter...
and its worked... I now get
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
im guessing the custom is due to CWM recovery...
cheers
g

Weirdness. It appears your cache partition is borked (its 10 MB instead of 1.5 GB ?!). This could explain the following problems people have reported:
- Mobile ODIN showing the logo but doing nothing else
- Triangle Away breaking recovery
Try flashing the attached cache file in (desktop!) ODIN, then try Mobile ODIN, Triangle Away, etc again. Problem should be solved then - please do let us know, several people are having this problem.
It's a ZIP file, extract once so you end up with a TAR file, put that in ODIN. If you end up with an IMG file, you extracted twice!
EDIT: Note: after flashing this image you will probably automatically boot into recovery - this is expected, just press power to reboot normally.

Hi,
Thank you... flashed the cache.zip, and it rebooted to the Galaxy Note II screen, then rebooted, over and over again...
so I reflashed the rooter, (cwm6-root-note2.tar) which DOES include flashing the cache, so maybe thats got a broken cache in it ? (the reflash fixed it)
odd...
Ive attached to rooting tar ive been using with the strange (but working...) cache file...
cheers
g
Chainfire said:
Weirdness. It appears your cache partition is borked (its 10 MB instead of 1.5 GB ?!). This could explain the following problems people have reported:
- Mobile ODIN showing the logo but doing nothing else
- Triangle Away breaking recovery
Try flashing the attached cache file in (desktop!) ODIN, then try Mobile ODIN, Triangle Away, etc again. Problem should be solved then - please do let us know, several people are having this problem.
It's a ZIP file, extract once so you end up with a TAR file, put that in ODIN. If you end up with an IMG file, you extracted twice!
EDIT: Note: after flashing this image you will probably automatically boot into recovery - this is expected, just press power to reboot normally.
Click to expand...
Click to collapse

Failed to upload..
at
https://dl.dropbox.com/u/279536/cwm6-root-note2.tar
thanks
g
ripnetuk said:
Hi,
Thank you... flashed the cache.zip, and it rebooted to the Galaxy Note II screen, then rebooted, over and over again...
so I reflashed the rooter, (cwm6-root-note2.tar) which DOES include flashing the cache, so maybe thats got a broken cache in it ? (the reflash fixed it)
odd...
Ive attached to rooting tar ive been using with the strange (but working...) cache file...
cheers
g
Click to expand...
Click to collapse

Yes, I confirm it is definitely the cwm6-root-note2 package that messes up your device. I've checked it out - its the cause for all the problems with Mobile ODIN and Triangle Away. It breaks the cache partition on your phone ( dr.ketan ... )
The reason flashing the fixed cache.tar didn't immediately fix your problems was because you still had a messed up recovery, so you also needed to flash a recovery, which you did now again with the cwm6 package. However, your cache is again broken. So now, *again* apply cachefix, and all should be good, and you should be able to use Mobile ODIN and Triangle Away.

Chainfire said:
Yes, I confirm it is definitely the cwm6-root-note2 package that messes up your device. I've checked it out - its the cause for all the problems with Mobile ODIN and Triangle Away. It breaks the cache partition on your phone ( dr.ketan ... )
The reason flashing the fixed cache.tar didn't immediately fix your problems was because you still had a messed up recovery, so you also needed to flash a recovery, which you did now again with the cwm6 package. However, your cache is again broken. So now, *again* apply cachefix, and all should be good, and you should be able to use Mobile ODIN and Triangle Away.
Click to expand...
Click to collapse
Sorry if it was asked before but will you release cf root with cwm recovery for note2? thx

I have no plans to release anything related to CWM ever again.

Chainfire said:
I have no plans to release anything related to CWM ever again.
Click to expand...
Click to collapse
Damn :/ btw what about your root? which wouldnt have issues with ta and mobile odin

EdgaBimbam said:
Damn :/ btw what about your root? which wouldnt have issues with ta and mobile odin
Click to expand...
Click to collapse
There might be a CWM-less CF-Root coming, indeed.

Hi.
That worked perfectly. I can confirm successful flash via mobile odin once I had fixed recovery and flashed that cache fix.
Many many thanks...
George

That wud be very nice.
Thank you..
Sent from my GT-N7100 using xda premium

[ROM][KITKAT][UNOFFICIAL] Cyanogenmod 11 for SM-T805 LTE 16gb

This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
25/03/15 Updated
Switched to nvertigo67 current-12.0 kernel
Fixed Kodi/XBMC touch issue
Changed from google to samsung MTP driver.
21/03/15 Update, fixed Phone call audio only coming through left speaker
20/03/15 Update, fixed Dialer crash.
19/03/15 Updated, fixed a few issues.
Power off charging is now working
Reboot recovery is working, I did have to edit the java code to make this work, seems a recent change in CM caused this, possibly a bug in cm?
Wifi hotspot fixed.
Added f2fs support to kernel, recovery also updated, have not fully tested changing filesystem to f2fs. Edit. Seems like it will require a special built rom and recovery to work, I will look at this when I start running out of bugs to fix
Many other minor fixes.
Not Working:
In call audio only coming through left speaker
Dialer app chashing on making or receiving a call
Power off charging, boots into recovery.
Advanced reboot menu, wont reboot into recovery, though adb reboot recovery works. Not sure whats going on here.
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
I find this tablet is so much better with this ROM , like many I hate Samsung's TouchWiz. Everything is so much smoother and responsive now.
To Install:
Flash TWRP Recovery First with odin, Follow this Cf-Autoroot guide and substitute CF-Auto-Root.tar with my recovery TWRP_SM-T805.tar downloaded from my google drive.
Once recovery is installed transfer the CM11 rom zip to your internal sdcard, also grab GAPPS http://wiki.cyanogenmod.org/w/Google_Apps and have that on your SD card also,
Optional grab supersu also.
Boot into recovery by powering off and holding down home, volume up and power till recovery starts.
Once in TWRP Recovery pick Install, choose the rom and gapps to install at the same time. Flash
After install finished we need to do a wipe, so go back to the main screen and choose wipe.
Reboot, Good luck.
I don't have a lot of time to answer questions, I will do my best to check back regularly.
Here is my github, It is upto date with my builds now. https://github.com/Andrewt12 )
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
cm-11-20150323-UNOFFICIAL-chagalllte.zip
cm-11-20150323-UNOFFICIAL-chagalllte.zip.md5
TWRP
https://drive.google.com/file/d/0B9JsCrp0SHzbekdGYV9mcks5bWs/view?usp=sharing

Deleted
Deleted

awesome Ive been waiting for something like this..

How bout t705? ?

all things are good in this rom can anyone verify this please

Cant install it can someone tell me steps on installinh it please

andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.

nvertigo67 said:
For camera take a look at the last 4 commits (the reverts) from here: https://github.com/nvertigo/android_packages_apps_Camera2/commits/cm-11.0
I'm so involved in cm12 developing that I don't know if you can just use my repo, or if you have to rebase/reaply, but that is what breaks camerawraper on our device. The opting out like on picasso don't work for chagallwifi, so I think chagalllte suffers from the same issue. Hope this helps.
Click to expand...
Click to collapse
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.

andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse
Congrats. Getting voice and data working is a great job! For klimtlte: chagallwifi and klimtwifi differ subtile, but they DIFFER (i.e. sound, capacitive keys). If you really want to try klimtlte too, you should have a look at @eousphoros gits.

.... very good. Waiting to put new version on my T-805..
Thanks a lot!
andyt12 said:
@nvertigo67, Thanks, that should help me get the Camera issue sorted. Good work btw, this rom is very stable.
@all, I have the modem working now. Calls and data are working. In the next few days I will post an updated rom and device files on github. I will also post clearer install instructions
@LoVeRice, Unsure about the t705, It could be mostly the same but may have small differences, I will download a stock rom when I get a chance and have a look.
Click to expand...
Click to collapse

Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api

any1 installed the rom yet if so please show steps on installing it please

meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My
Click to expand...
Click to collapse
You come from a Wifi-only rom, s.a CM-12?
Your tablet is defined as a wifi. You can edit the package script in the zip to remove the control
Skickat från min SM-T805 via Tapatalk

I have tested a wifi only cm11 package, yes. It runs on my Tab very good without 3G option... Wifi only. Iam happy it comes an CM11 for T805. OK wich files must editiding to removed the control? I will tested it

andyt12 said:
This is a Cyangenomod rom for 10.5 Galaxy TAB S SM-T805 LTE.
Ive built this from nvertigo67 tree for SM-T800 so he deserves all the credit.
Not Working:
Modem/Radio, wanted to get the rom working first and will now continue to get the radio up.
Camera, This could be a bug in CM from what I have googled. edit There is a fix, link down beow.
This tablet is to much better with this ROM , like many I cant stand Samsung's TouchWiz. Everything is so smooth and responsive now. If Samsung bought this tablet out with AOSP it would be a sure winner.
To Install:
Flash TWRP Recovery First with odin, I use 3.07, the one that comes with CF-Auto-root. Then flash the cm from recovery.
I dont have a lot of time to answer questions, I will do my best to check back regularly.
I will provide the source to my changes in a few days.
The usual disclaimer apply's. No warranty, I accept no responsibility if the rom causes you and you tablet any harm. Flash at your own risk, ect.
Cant post links, copy and paste
drive.google.com/folderview?id=0B9JsCrp0SHzbajdLdGZUVEhRTzA&usp=sharing
Camera Fix http://forum.xda-developers.com/galaxy-s3/themes-apps/17-fixed-camera-app-lib-cm-aosp-roms-t2505973
Click to expand...
Click to collapse
This is what weve all been waiting for!!! The modem working as well would be such a bonus , just wow!

meexx said:
Hi,
I have tested this ROM for T805 and I have problems in TWRP. I cant install this ROM it comes with Error " This package is for device: chagalllte; this Device is chagallwifi / E:Error executing updater binary in zip '/external_sd/.............. ". My Twrp is 2.8.5.0 the newest for this Tab . I have an screenshot .... is this an Problem with Twrp or is this incompatible for my Tab ? I have defenitif an Tab S 10.5 LTE T805
Errormassage: https://drive.google.com/file/d/0B1jrIRt04q3WUmtRM3BBczBMLXc/view?usp=sharing
My Tab: https://docs.google.com/file/d/0B1jrIRt04q3Wb2pGYkViLTFPazA/edit?usp=docslist_api
Click to expand...
Click to collapse
Hi meexx, You will need to use my twrp, different partition size than chagallwifi, thats also why it throws an error, as you installed chagallwifi twrp and it is looking for the wifi rom.
Just hold off for now though, my latest has many fixes to what I posted. I will hopefully upload later today, got to finish my chores first otherwise I will be in trouble with the wife for spending too much time on the computer.

Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work

meexx said:
Ok OK........ Greeting your wife we waiting for you. Can you make a Link to your twrp version? When this my problem is then i flash your twrp with odin and all is good, I hope so. Have a nice weekend.......... and Thanks for your work
Click to expand...
Click to collapse
Its in my google drive.
https://drive.google.com/file/d/0B9JsCrp0SHzbeTdjTDhDUUVDa00/view?usp=sharing
Doing a fresh build now.

Updated build in first post.

I had the same problem but just deleted the first three lines of text in the updater-script file. Only problem I got now is that titanium backup can't see my external SD card

Flashing a Note3, asking for help...

First, I have installed a ROM on my phone before and I followed very specific instructions. I am a developer in the land of microsoft so I recognize I am very much a newbie here.
Now, on to what I have now and what I want to do.
1. I have a Note 3. The SM-N9005. The baseband version is: N900W8.... suffice to say it is a canadian phone. If the rest of the baseband numbers are important I will post them, just ask.
2. I want to install the Alliance ROM, it seems to have what I am looking for.
3. When I rooted and ROMed my phone years ago I used the following thread: http://forum.xda-developers.com/show....php?t=2614772
4. Currently my phone is running a Jedi ROM from the vintage of that thread. However I must have made a mistake back then because the Hotspot feature does not work. Making the hotspot feature work again is my primary reason for undertaking this operation. The 4G works, I can use the Internet on the phone just fine. The wireless works I can connect to a wireless signal and use the internet that way (I confirmed this was working with mobile data off). The hotspot will allow a connection from a device (such as my laptop), but no data passes between the 4G connection and the connected computer.(yes, I turned on Mobile Data On) I have tried this using different computers connected to the hotspot to confirm it is the fault of the Note3.
Back when I did this flashing thing before I had to be careful to get the right CSC file and modem file and a few other steps. I had to specify the correct CSC file in addition to the rom I wanted to flash.
With that background, my questions are below (if you need any more info to point me in the right direction, just ask):
One last note... I will be performing any and all instructions from a macbook pro Mid 2012 with no other devices on the usb host controller running a near virgin copy of windows 7.
-----------------------------------------------------------
Do I need to worry about CSC files, modem files and so on to Flash to Alliance ROM and still have everything work? I ran across a thread that said that some ROMs have all the CSC files in them, but I cannot find any direct information (or I missed it) about the Alliance ROM with regards to CSC files and the like.
I thought I had TWRP installed, but when I boot to recovery the top two lines read
line1: Android system recovery <3e>
line2: KOT49H.N9005XXUENB4
Is this TWRP? Should I download the latest TWRP for my device and flash it using the AP button from Odin 3.10? If there is a different technique I should use, I will try it.
The instructions say that if I am not installing from stock 4.4.2 or stock 5.0 that I should install stock first, then install the alliance rom. I visited the sammobile website and there are no ROMs for the USA or Canada there... am I missing something or should I just use the UK ROM from that website? I guess I am not sure how to identify the correct ROM for Canada.
I did load the Alliance ROM 8.2 onto my SD card and attempted to use the option apply update from external storage and it failed. Nothing happened at all and the phone eventually rebooted and the ROM never installed.
Thanks in advance for any help you can provide me on this endeavour. I am largely looking for resources that I have not been able to find up until now. I am okay with help such as Read This Post! and so on.

If the phone is an n9005, not sure how the baseband can be n900w8 as the n9005 was never sold by Canadian carriers as far as I know.
Here's a link to the stock n900w8 firmware: http://www.sammobile.com/firmwares/database/SM-N900W8/

wizengamot said:
Thanks in advance for any help you can provide me on this endeavour. I am largely looking for resources that I have not been able to find up until now. I am okay with help such as Read This Post! and so on.
Click to expand...
Click to collapse
First of all, you should detect what device you own. You can install this APP and add some screenshots for avoid problems and give us more info about your device (IMEI not necessary).
We will try to detect if you own a clone, a SM-N9005 or SM-N900W8.

Additional Info as requested
Here are the screenshots that were requested. Thanks for your help. Yes, I will and continue to use the thanks button as well.

wizengamot said:
Here are the screenshots that were requested. Thanks for your help. Yes, I will and continue to use the thanks button as well.
Click to expand...
Click to collapse
I think you should flash the stock rom first via ODIN. Coz your baseband don't fit with your bootloader and your PDA either.
PS: You can use MEGA mirror as well :highfive:

I have the stock ROM from SamMobile. I am set to flash the phone. I have everything set but I searched the forum as a final check to make sure I am doing the right things and I found a post that says I need a PIT file. I can find a PIT file for HLTE verizon phones but I do not know if that PIT file works with the image I downloaded from sammobile. Of course I am connecting the dots from the info program I ran where is says on the general tab that the phone is of type hlte.
When I click on PIT in Odin it says this function is for engineers only. As a programmer myself I would put a message like that for a function I don't want people using needlessly but it does give me pause to ask about it. As they say Flash in Haste...Cry at Leisure..

Many thanks to you all. I have installed the stock ROM and it works. I can make phone calls, wifi works, 4g works, and hotspot works.. YAYA... Now, I would do the alliance rom but I can honestly say I am not sure I want to mess with it. I want the phone call recording feature but that is all I want...It would be the only reason to do the alliance rom. And it appears as though that rom is not done the same way as the stock rom as there is no md5 file.
anyhow.. thanks again to all who helped. I have thanked each post as well. If you have some tips based on my above info, I would be very grateful.

There are quite a lot of call recording apps which work well as far as I know, ACR being one of the example.

Only tar or tar.md5 files are flashed in Odin. Any non-stock ROMs are flashed using a custom recovery.
You can flash a custom recovery to your phone using Odin in the PDA/AP box from here: https://twrp.me/Devices/ Just use the latest tar file.
Once you have a custom recovery on the phone, you can create a backup of your existing ROM, then flash a custom ROM.

New Firmware 5.0.0-RU1.1.99

You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!

Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.

All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .

Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.

Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .

So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.

To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.

Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings

Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...

does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos

Does the new update solve the keyboard sensitivity issue??

zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx

Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.

It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.

Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167

TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head

Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.

I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.