Wondering if anyone knows of a way to disable the "to charge faster use original charger" pop up message.
I understand if an aftermarket charger is used you will receive this message. I just happen to like my aftermarket charger better than the original.
I just want to disable the message from popping up permanently. Any help appreciated. Thanks!
Related
OK.
I have read the Accessories Posts, but didnt found an Solution for this.
I own an 5000mah Power Bank with USB Connectors.
Output 1A.
So, as you Guys know, if i connect such Device via USB-Data Cable it is detected by Tab as "PC-connected" and the Tab does not charge. If Tab is off, it charges quick and i am able to charge it with one Power Bank Load 1 1/2 Time.
And with my Galaxy S it works also if the Phone is on.
So my Question.
Is there any Tweak, Trick or Mod to enable the Tab to Charge it this Way?
Is it possible to modify some System settings to bring it work?
Have you checked in settings, if the battery charge doesn't go up?
It will charge using any current (even 300mA) only slower. The icon on the battery just says "I'm not connected to my proper charger", not "I'm not charging".
On JM6 and JMA the icon is also a bit better and show's it's charging but not full speed But charge rate is same as before.
TarjeiB said:
Have you checked in settings, if the battery charge doesn't go up?
Click to expand...
Click to collapse
Yes.
I am also using Battery Pro that displays me an Icon with Battery Load in Percent.
But the Tab doesnt charge.
Load of Akku decreases.
Yes. (Having JMA) the Stock Icon displays that an Power source is connected but still doesnt charge at all.
My Hope was, that anyone with Programming/Coding Skills is able to bring the Charging to work.
I am not nearly able to do this
I find it absolutely bad, that Samsung has made this incision to the usability of the Tab.
On my Galaxy S i can change with the same Power Bank in Operation without any Problems.
Very Pity that the Tab does not
pbruck said:
OK.
I have read the Accessories Posts, but didnt found an Solution for this.
I own an 5000mah Power Bank with USB Connectors.
Output 1A.
So, as you Guys know, if i connect such Device via USB-Data Cable it is detected by Tab as "PC-connected" and the Tab does not charge. If Tab is off, it charges quick and i am able to charge it with one Power Bank Load 1 1/2 Time.
And with my Galaxy S it works also if the Phone is on.
So my Question.
Is there any Tweak, Trick or Mod to enable the Tab to Charge it this Way?
Is it possible to modify some System settings to bring it work?
Click to expand...
Click to collapse
Hi Pbruck, which power pack are you using & what's the specification for it. can you provide me with the model no.? Thank you.
Hi,
i use this:
http://www.pearl.de/a-PX5398-5542.shtml
Sorry, but have only found it in this German Shop.
Maybe you can still use the provided Informations there.
Babelfish Translation:
http://de.babelfish.yahoo.com/trans...X5398-5542.shtml&lp=de_en&btnTrUrl=Übersetzen
It says "1A (2x usb)" so you need to use 2 ports to get to the 1A.
There is no programming or modding necessary, the tab charges from anything that is powerfull enough and your crappy cheap charger is not (im just teasing you cause i ordered things from pearl before and all they sell is junk).
I just purchased a generic Qi wireless charger receiver card and transmitter for the S5. I can't post the link because of new member rules.
The charger works well but when the battery reaches 100% full the phone stops charging. According to the Qi standard there is no provision or method for a 'trickle charge' used by all the traditional wall chargers (I can't post the link to this either because of new member rules). What Qi does instead is turn the charger on and off periodically to keep the battery at 100% - this process is supposed to be managed in the background operations of the phone.
With the S5 ever few seconds the screen turns on, a charger connected sound is played, and then the charger turns off and the screen turns off THIS REPEATS FOREVER. The phone gets quite hot and it's terribly annoying. This happens even if the phone is turned off. I'm not sure it even has anything to do with the trickle charge process - seems like its stuck in a loop. Qi transmitter detects a Qi enabled device and begins pumping power. Qi device produces 5.3v (or something similar), phone sees input voltage and turns on to notify user of charging, and charging stops almost immediately because the battery is full (repeat, repeat, repeat...).
Is there anything in the settings or using apps that would fix this problem? Does anyone know if the samsung brand S cover (charging cover) has some extra provision that prevents this annoying problem?
farmersride said:
I just purchased a generic Qi wireless charger receiver card and transmitter for the S5. I can't post the link because of new member rules.
The charger works well but when the battery reaches 100% full the phone stops charging. According to the Qi standard there is no provision or method for a 'trickle charge' used by all the traditional wall chargers (I can't post the link to this either because of new member rules). What Qi does instead is turn the charger on and off periodically to keep the battery at 100% - this process is supposed to be managed in the background operations of the phone.
With the S5 ever few seconds the screen turns on, a charger connected sound is played, and then the charger turns off and the screen turns off THIS REPEATS FOREVER. The phone gets quite hot and it's terribly annoying. This happens even if the phone is turned off. I'm not sure it even has anything to do with the trickle charge process - seems like its stuck in a loop. Qi transmitter detects a Qi enabled device and begins pumping power. Qi device produces 5.3v (or something similar), phone sees input voltage and turns on to notify user of charging, and charging stops almost immediately because the battery is full (repeat, repeat, repeat...).
Is there anything in the settings or using apps that would fix this problem? Does anyone know if the samsung brand S cover (charging cover) has some extra provision that prevents this annoying problem?
Click to expand...
Click to collapse
The real question is, why are you keeping it on the charger once it's 100% charged? At that point just remove it and continue about with your day
Greetings. I'm new to these forums though I have visited numerous times to find fixes to various issues. I have rooted my Note 3 with towel root and now have Lollipop 5.0 rooted installed. I was hoping to install the Xposed framework in order to finally be able to kill the screen turning on with wireless charging problem. I wake up at night to my phone screen turning on and off as it cycles through charging and charge full notifications. I have installed "Headsoff" app which has killed the issue with wired charging and does prevent the sound notification with wireless charging but the screen still turns on. I also installed "App Ops," went into System UI and turned off Post notification per someone elses recommendation. Again, this seems to only apply to the wired screen on with charge function. When I tried to install Xposed framework, I learned it won't install on Android 5 without writing new code in the OS? This seems highly technical and risky to me as I am not that savvy with writing code. I have searched the forums and find many postings complaining about this problem and the best fix seems to install Xposed which seems hard to do with Android 5. I would greatly appreciate any input about how to solve this. Perhaps going with a custom ROM? Any recommendations? Thanks.
Developer options ON?
rlmppna said:
Greetings. I'm new to these forums though I have visited numerous times to find fixes to various issues. I have rooted my Note 3 with towel root and now have Lollipop 5.0 rooted installed. I was hoping to install the Xposed framework in order to finally be able to kill the screen turning on with wireless charging problem. I wake up at night to my phone screen turning on and off as it cycles through charging and charge full notifications. I have installed "Headsoff" app which has killed the issue with wired charging and does prevent the sound notification with wireless charging but the screen still turns on. I also installed "App Ops," went into System UI and turned off Post notification per someone elses recommendation. Again, this seems to only apply to the wired screen on with charge function. When I tried to install Xposed framework, I learned it won't install on Android 5 without writing new code in the OS? This seems highly technical and risky to me as I am not that savvy with writing code. I have searched the forums and find many postings complaining about this problem and the best fix seems to install Xposed which seems hard to do with Android 5. I would greatly appreciate any input about how to solve this. Perhaps going with a custom ROM? Any recommendations? Thanks.
Click to expand...
Click to collapse
Settings -> Developer options -> Stay Awake?
nijom said:
Settings -> Developer options -> Stay Awake?
Click to expand...
Click to collapse
Thanks for the response. Unfortunately, I've already tried that and have confirmed the "stay awake" fnt in developer options is turned off. Also, this is only happening with wireless charging. I have a wireless charge base next to my bed and also have one in my car. If I bypass wireless and directly hook up the cable, I have no problems. Very frustrating.
I am still hoping for help with this problem. I have searched and just don't find an obvious fix. I keep waking up to my display lighting up briefly. Once it starts, it cycles every few minutes; on/off. I don't know for sure but think it is the charge full/wireless charging cycle. It doesn't buzz or make noise as I have killed the sound notification. However; I can find no way to prevent the display from turning on. I found an app called "Screen Stay Off" which is supposed to prevent this. Unfortunately, it doesn't work. It causes the screen to flicker on/off rapidly, then the screen turns on and stays on. Frustrating. I am open to using a different ROM if no other solution. Thanks.
rlm
I have an s4 with a wireless qi receiver attached to the battery terminals. It also cycles through charging/not charging and it doesn't seem to matter how full the battery is. Sometimes, it will charge for 10 minutes and then just stop charging. Removing it from the charging pad and putting it back on will not charge the phone even though the receiver is detected by the pad.
I have a qi receiver on order for my note n900w8 and hope to have better luck with that than my s4.
audit13 said:
I have an s4 with a wireless qi receiver attached to the battery terminals. It also cycles through charging/not charging and it doesn't seem to matter how full the battery is. Sometimes, it will charge for 10 minutes and then just stop charging. Removing it from the charging pad and putting it back on will not charge the phone even though the receiver is detected by the pad.
I have a qi receiver on order for my note n900w8 and hope to have better luck with that than my s4.
Click to expand...
Click to collapse
Thanks. I haven't noticed a problem with charging. Mine seems to get into this cycle only after it achieves full charge. Then the "full charge" notification comes. Phone stops charging and starts discharging. Then when it drops to ~ 98%, it starts charging again and I get the "wireless charging" notification. After root and going through various settings, I have killed the notifications that used to pop up; "Full charge, please disconnect the phone from the charger" and then "wireless charge detected" notifications. However, I can't prevent the display from lighting up. If changing out the wireless receiver fixes your problem, please let me know. I wasn't thinking the receiver might be the cause, but at this point, I'll give it a try. Last night I capitulated and plugged the phone in directly to the charge cable and bypassed the wireless charger. I have no issues that way. Why wireless charging functions differently is a mystery to me.
With my s4, i tried 3 different wireless pads and only two of the three would detect the receiver and charger sporadically. One of the wireless chargers was a google nexus wireless charger. Hopefully, I will have better luck with my note 3 when I get the receiver from eBay. I got two note 3 receivers with nfc from eBay but neither of those receivers would work with my sm-n900w8.
My nexus 4 and nexus 5 which have built-in wireless charging receivers, works perfectly with all three charging pads without issue. They charge fully and don't give me messages that the battery is full.
Hi
Anofher stupid question with stock rom if u plug the fast recharge i can see a pop out say me "turbo charger is on"
I think use extra usb3 Power i Hope i can see the pop up in the next update
Os is amazing
demonsmaycry said:
Hi
Anofher stupid question with stock rom if u plug the fast recharge i can see a pop out say me "turbo charger is on"
I think use extra usb3 Power i Hope i can see the pop up in the next update
Os is amazing
Click to expand...
Click to collapse
The toast popup for Turbocharging is, as far as I know, only present on the stock ROM. Turbocharging should be present (especially if you test with a charging app like Ampere), but if you really miss the Turbocharger popup, here's an post with a link to an app that may help: https://forum.xda-developers.com/showpost.php?p=71930804&postcount=2154
Hello,
My S9+ has a problem when using wireless charging, the phone will auto unlock.
Does anyone know the reason for this or it's just me having this issue?
:silly:
If you mean does the screen come on, then yes. However I still need to swipe to unlock.
If you mean does the screen come on, then yes. However I still need to swipe to unlock.
Chad Paul said:
Hello,
My S9+ has a problem when using wireless charging, the phone will auto unlock.
Does anyone know the reason for this or it's just me having this issue?
:silly:
Click to expand...
Click to collapse
What phone case do you use?
I not sure if your phone case has a magnet it may effect with wireless charger, because wireless charger use electromagnets power
Did you change the "Developer options" menu? There are "Stay awake" mode, and the screen will never sleep while charging.
Also, it can use "Face recognition" when you look at it
Any case that is not official and is more than like 5mm thick will affect the wireless charging abilities of the S9+.
Having root will stop the option to enable fast wireless charging appearing in the accessories section (In fact on g9650 Accessories no longer shows in settings after root is active - at least in my experience).
Paid 2500 Pesos Argentinos for my Samsung Wireless charging stand, didn't even come with a cable in the box and is Micro USB so my USB C won't run it. Very disappointed in this and the strength of the charging cable in general, but the cost and treatment of consumers in Argentina is not the greatest anyways.
Edit: I rescind my comment about the Accessories section not showing, this was my own stupidity. Also, changing the USB cable of the fast charger to a different one has solved the fast charging issue.
Still think for the amount of money that was paid for it a cable should have been included