Related
Decided to help out and with the ok from ihtfp69 i wrote up a FAQ page
for everyone who uses Sky Raider Rom 3.3 Final
feel free to add.
zip is 180,304 kb
Sense 3.3 Requires a FULL WIPE
to avoid reboots make sure you have S-Off, Upgrade the radio to the OTA version
Wipe everything:
Factory Reset
Data Cache
Dalvik Cache
then apply SR 3.3
The initial boot animation is only there for the first boot and reverts to the original thereafter.
The fix for Rom Manager for fix permissions requires you to open Rom Manager once and then it will work after a reboot
Q: How to flash the ROM?
A:good info here... http://forum.xda-developers.com/showthread.php?t=709220
Q: Since 3.3 requires a full wipe, due to all the changes, I was wondering if the MM mappings for the rosie launcher are still compatible with this new release.
A: All of the mappings are new so make sure you clear out the old ones and download the new ones.
Q:how to Change your lock screens from adb or terminal shellLock
A: there are 13 different lock screens including the HTC one
You must be on SP1 or higher to use them
Change your lock screens from adb or terminal shell
Type 'tabunlock' or 'rotaryunlock' to get the menu seen below
Please choose from the menu - S-OFF REQUIRED
1) normal
2) normal+menu unlock
3) normal+trackball unlock
4) music buttons
5) music buttons+menu unlock
6) music buttons+trackball unlock
7) restore HTC lock screen
8) get me out of here!
reboot
Q: how do you get a logcat?
A: Run CMD prompt and in while in the root folder sdk/tools/ run the command "adb logcat" copy paste all you see onto pastebin.com and post the link. or download logcat from market
"HTC Mail Mod for EAS Admin Removal" You just go to settings -> security -> remove admin policy
Any chance someone wants to actually put this on the wiki?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Droid_Incredible
There is a ROM section in there and would be a much better location than in a forum post.
What do you guys think?
supagene said:
Any chance someone wants to actually put this on the wiki?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Droid_Incredible
There is a ROM section in there and would be a much better location than in a forum post.
What do you guys think?
Click to expand...
Click to collapse
up to our mod overground
Baseband version 1.00.03.03.06
hi
I am running SkyRaider 3.0 Sense RC3 but I have been unsuccessful in updating the radio. I've tried HBOOT but it doesn't like the image, tried renaming to update.zip, tried running the zip from Recovery.
Please advise.
thanks
Jack
Hello,
I would like to know what is "HTC Mail Mod for EAS Admin Removal". Is this some kind of feature?
I would like to disable the PIN Lock on my phone that is enforced by my companies security policy. I used to use LockPicker on Android 2.1 but that no longer works. Is there another solution for Android 2.2?
Thanks.
Nevermind I found it. You should add this to the FAQ. You just go to settings -> security -> remove admin policy (forgot the actual name since after I removed it, the option is no longer there)
Im having a couple of problems
1) I cant get my Yahoo mail account to set up, I have installed the Mail Mod from ROM manager.
2) I am trying to install an application from the market and i am getting the error saying I dont have enough space to install. I really dont have many apps so i dont think thats accurate. I have cleared the market's cache, data, and restarted the application, problem still persists.
Thanks for the help
surfboard3r said:
2) I am trying to install an application from the market and i am getting the error saying I dont have enough space to install. I really dont have many apps so i dont think thats accurate. I have cleared the market's cache, data, and restarted the application, problem still persists.
Click to expand...
Click to collapse
Check to see how many saved backups you have. Each backup can be upwards of 300mb's. If you have more than three that could be the problem. Happened to me once before. I got rid of a couple unnecessary backup files and freed up over half a gig of space. Apps from the market installed with no problems again afterward.
chrisloveskaos said:
Q: How to enable Tab Lock Screen with Sound Controls?
A: You need to remove the HTC lock screen to get to the underlying stock lock screen, get into Recovery, mount system, I go into adb shell to remove
cmd prompt
Code:
c:/sdk/tools>adb shell
~# (showsup) mkdir /system/app.disabled/
~# mv /system/app HtcLockScreen.apk /system/app.disabled/
~# exit
Click to expand...
Click to collapse
I keep getting stuck in a boot loop...
Stu_Gotti said:
I keep getting stuck in a boot loop...
Click to expand...
Click to collapse
There was a missing / between app and HtcLockScreen.apk
Can I just install SP2, or do I have to do SP1 first? ROM Manager is not pulling up SP1.....
gobluejd said:
Can I just install SP2, or do I have to do SP1 first? ROM Manager is not pulling up SP1.....
Click to expand...
Click to collapse
i thk just 2 is fine
Hi I just loaded skyraider 3.3 a couple days ago and tried out the lock screens, and up til now I've had no trouble loading the service packs or the lock screens thru ROM Manager but after activating a lock screen and rebooting thru terminal, I'm now stuck on the boot animation, batt pulls don't work, and I can get to recovery but I don't know what to do from there. Please HELP!!!!
m89maru said:
Hi I just loaded skyraider 3.3 a couple days ago and tried out the lock screens, and up til now I've had no trouble loading the service packs or the lock screens thru ROM Manager but after activating a lock screen and rebooting thru terminal, I'm now stuck on the boot animation, batt pulls don't work, and I can get to recovery but I don't know what to do from there. Please HELP!!!!
Click to expand...
Click to collapse
You have to let it sit for a good while... mine took like 5 minutes after changing the lock screen.
Is it normal for it to take up to 3 hours to complete? Cuz that's what keeps happening
Sent from my ADR6300 using XDA App
m89maru said:
Is it normal for it to take up to 3 hours to complete? Cuz that's what keeps happening
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
no only 5 mins maybe
Can you update this ROM please? I dont have any bugs that need fixing, but i realllly love this ROM and my A.D.D kicks in if i dont make some sort of change
Already added circle battery and 6bar hehe
Update what exactly though? If you have no bugs then the Rom is fine.
Sent from my ADR6300 using XDA App
m89maru said:
Update what exactly though? If you have no bugs then the Rom is fine.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Yes i know
How about the lockscreen update? I think he asked if there was any interest, i would love it! Basically eliminate the lock screen altogether
rsarno said:
Yes i know
How about the lockscreen update? I think he asked if there was any interest, i would love it! Basically eliminate the lock screen altogether
Click to expand...
Click to collapse
There icons that can b changed through metamorph. I made mods to mine with colored icons like bluetooth, car mode, sms, gmail, email. Two kinds of email- basic email app icon r have one made for me for yahoo. So now when I get a email a yahoo icon pops up in my notification. Ask a themer to make you some. Themes and apps has some. I suggest using sysinterwolf cuz he is the man.
Hi,
I've installed Quarx CM9 5th March build. Things are pretty smooth with this build except for one issue: in the call log, for outgoing calls, contact name is not displayed. It shows empty contact name. Incoming calls are displayed properly. I don't know if anyone else has this issue or if it's unique to my handset. Btw, I have a Motorola Defy MB525 handset.
Any help would be really appreciated.
thanks,
--wilson
Have you tried the phone options, go into dialer hit menu check the caller id option.
Sent from my MB525 using XDA
bravouno said:
Have you tried the phone options, go into dialer hit menu check the caller id option.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
The option is operator specific and is grayed out. I probably should do a cache wipe and dalvik wipe and see if that helps.
Have same issue, cache/dalvik wipe did nothing.
nessonic said:
Have same issue, cache/dalvik wipe did nothing.
Click to expand...
Click to collapse
me too.. infact even after doing a factory reset, the problem persists. I am going to try 8th March build and see if that solves this issue. Strange that no one else has reported it so far.
Since i don't have enough posts to report this in developer forum, can you please report this issue ??
thanks,
-wilson
dionysius.almeida said:
Hi,
I've installed Quarx CM9 5th March build. Things are pretty smooth with this build except for one issue: in the call log, for outgoing calls, contact name is not displayed. It shows empty contact name. Incoming calls are displayed properly. I don't know if anyone else has this issue or if it's unique to my handset. Btw, I have a Motorola Defy MB525 handset.
Any help would be really appreciated.
thanks,
--wilson
Click to expand...
Click to collapse
No issues buddy...i was also facing this problem initially..but i got a flashable zip file for CRT animation which is posted by pottkopp .. just Flash this zip in CWM and reboot..bingo .. u will get CRT animation along with the caller id issue fixed..hope this works for u..
Link: http://forum.xda-developers.com/showpost.php?p=23356794&postcount=2248
Download the zip from above link ..
kanna91 said:
No issues buddy...i was also facing this problem initially..but i got a flashable zip file for CRT animation which is posted by pottkopp .. just Flash this zip in CWM and reboot..bingo .. u will get CRT animation along with the caller id issue fixed..hope this works for u..
Link: http://forum.xda-developers.com/showpost.php?p=23356794&postcount=2248
Download the zip from above link ..
Click to expand...
Click to collapse
Thank you so much. That solved the problem and I get CRT animation too
cheers,
-wilson
dionysius.almeida said:
The option is operator specific and is grayed out. I probably should do a cache wipe and dalvik wipe and see if that helps.
Click to expand...
Click to collapse
when you go to dialer settings and callerid settings, just before it retrieves the operator default settings, press the caller-id option, this would open the window with three options, meanwhile in the background the operator settings will be read. Just change the setting to show caller-id and you are done.
This has been discussed many a times in CM9 all three threads so many times, may around 500times, someone was pointing.
premaca said:
when you go to dialer settings and callerid settings, just before it retrieves the operator default settings, press the caller-id option, this would open the window with three options, meanwhile in the background the operator settings will be read. Just change the setting to show caller-id and you are done.
This has been discussed many a times in CM9 all three threads so many times, may around 500times, someone was pointing.
Click to expand...
Click to collapse
Thanks for the mentioning it. Even though I check CM9 threads, there are just too many posts to find this answer. Also, it's not a very intuitive way of setting preferences, hence couldn't figure out on my own
cheers,
-wilson
Hallo,
I am using CM7 on my little Samsung Galaxy Y, but forgot the pattern I set.
I tried a lot, and after that, I remembered it again, but it is not useful anymore, it is asking me for my Gmail account, I KNOW the password, but can't remember the email anymore.
How can I get my SMSs (I only need them for very important number there).
Thank you.
Do you have usb debugging on you device? If yes, download android sdk and run those commands:
adb -d shell
sqlite3 data/data/com.android.providers.settings/databases/settings.db
update system set value=0 where name=’lock_pattern_autolock’;
.exit
exit
adb reboot
Click to expand...
Click to collapse
or
adb shell rm /data/system/gesture.key
exit
adb reboot
Click to expand...
Click to collapse
If you dont have, i think a factory reset is needed :/
Sent from my GT-S5360 using xda app-developers app
Arwany said:
Help me, I forgot my pattern.
Click to expand...
Click to collapse
1.Factory Reset
2.Try solution above
Arwany said:
Hallo,
I am using CM7 on my little Samsung Galaxy Y, but forgot the pattern I set.
I tried a lot, and after that, I remembered it again, but it is not useful anymore, it is asking me for my Gmail account, I KNOW the password, but can't remember the email anymore.
How can I get my SMSs (I only need them for very important number there).
Thank you.
Click to expand...
Click to collapse
This might be silly but it might work too (I have not tried but heard that it works) Insert sim card in your Galaxy Y, Dial your number from any where else (Frens cellphones you might pay him for that) Accept the call Don't end call rather press the button one at middle (it minimize your calling process) and navigate to Message and note that number.In that process try this too If play store can be started while minimized calling download any lock-screen application apply that And you should not flash it.
If above didnt work few suggestions Just copy the clockwork mode to SD card (Send it via SD CARD) Now backup the OS and flash it to default rom if you want to use it now for calling purpose or using it and you can revert it's backup and try entering password again in future.
If it really worked Please look at thanks button below
checkpoint_sagun said:
This might be silly but it might work too (I have not tried but heard that it works) Insert sim card in your Galaxy Y, Dial your number from any where else (Frens cellphones you might pay him for that) Accept the call Don't end call rather press the button one at middle (it minimize your calling process) and navigate to Message and note that number.In that process try this too If play store can be started while minimized calling download any lock-screen application apply that And you should not flash it.
If above didnt work few suggestions Just copy the clockwork mode to SD card (Send it via SD CARD) Now backup the OS and flash it to default rom if you want to use it now for calling purpose or using it and you can revert it's backup and try entering password again in future.
If it really worked Please look at thanks button below
Click to expand...
Click to collapse
This is a really good tip man!
But if he recover the backup the password will return too I think.
gu200123 said:
Do you have usb debugging on you device? If yes, download android sdk and run those commands:
or
If you dont have, i think a factory reset is needed :/
Click to expand...
Click to collapse
Thank you, this is a working solution, it has helped me
checkpoint_sagun said:
This might be silly but it might work too (I have not tried but heard that it works) Insert sim card in your Galaxy Y, Dial your number from any where else (Frens cellphones you might pay him for that) Accept the call Don't end call rather press the button one at middle (it minimize your calling process) and navigate to Message and note that number.In that process try this too If play store can be started while minimized calling download any lock-screen application apply that And you should not flash it.
If above didnt work few suggestions Just copy the clockwork mode to SD card (Send it via SD CARD) Now backup the OS and flash it to default rom if you want to use it now for calling purpose or using it and you can revert it's backup and try entering password again in future.
If it really worked Please look at thanks button below
Click to expand...
Click to collapse
This work-around didn't work for me, it didn't allow me to go anywhere else. But thanks however for the answer
Backup TA for Sony Xperia™ (Mac OS X version)
With this app you can backup and restore the TA partition of your device.
This can be useful, for example, when you want to unlock your bootloader and not lose your DRM keys and most importantly, your warranty. Before unlocking your bootloader, backup your TA with this app and you will be able to restore it to a factory state (locked bootloader, DRM keys intact, etc).
The app is based on TA Backup v9.10 by DevShaft (thanks !), which can be found here.
View attachment 2573685
Downloads
Frequently asked questions
Source code
Issues
Thanks a lot for bringing this to Mac OS X and make it open source as well! Will have a look at the source and your work at a later time.
Stuck on requesting root on the first try, successful in the second time.
stanley321 said:
Stuck on requesting root on the first try, successful in the second time.
Click to expand...
Click to collapse
Did SuperSU ask you to grant permissions to "shell" when it hanged ?
limiter121 said:
Did SuperSU ask you to grant permissions to "shell" when it hanged ?
Click to expand...
Click to collapse
I have granted SU permission to shell, so it won't prompt anyway.
The app is then not responding and I have to force close it.
stanley321 said:
I have granted SU permission to shell, so it won't prompt anyway.
The app is then not responding and I have to force close it.
Click to expand...
Click to collapse
Yeah, the app will appear to hang but it actually waits for adb to work it's magic.
Is there any chance you could send me a copy of the system log ?
To do so, open the Console app, enter "Backup TA" in the search field in the top right corner (to filter the logs) and make sure that "All Messages" is selected in the Log list (sidebar) on the left side of the window. At this point there should be lots of messages from Backup TA shown. You can now go to File -> Save a copy as... and send that file to me so I can look at what went wrong.
Thanks :fingers-crossed: !
limiter121 said:
Yeah, the app will appear to hang but it actually waits for adb to work it's magic.
Is there any chance you could send me a copy of the system log ?
To do so, open the Console app, enter "Backup TA" in the search field in the top right corner (to filter the logs) and make sure that "All Messages" is selected in the Log list (sidebar) on the left side of the window. At this point there should be lots of messages from Backup TA shown. You can now go to File -> Save a copy as... and send that file to me so I can look at what went wrong.
Thanks :fingers-crossed: !
Click to expand...
Click to collapse
Tried but nothing show up after the search!?
So I think it is just a case that I'm too hurry to check the app and closed it earlier than I should while it is working.
stanley321 said:
Tried but nothing show up after the search!?
So I think it is just a case that I'm too hurry to check the app and closed it earlier than I should while it is working.
Click to expand...
Click to collapse
Try selecting system.log in the sidebar and then search for Backup TA, it should work.
Anyway, I'll implement a better way to get logs from the app soon
limiter121 said:
Try selecting system.log in the sidebar and then search for Backup TA, it should work.
Anyway, I'll implement a better way to get logs from the app soon
Click to expand...
Click to collapse
I find it but can't get it up here...
We are sorry, your post was flagged by our system and was blocked from submitting. If you believe this was in error, please contact an admin to report this.
Looking at it, I think I just closed it too early. Nothing wrong with your part!
stanley321 said:
I find it but can't get it up here...
We are sorry, your post was flagged by our system and was blocked from submitting. If you believe this was in error, please contact an admin to report this.
Looking at it, I think I just closed it too early. Nothing wrong with your part!
Click to expand...
Click to collapse
Too bad about the log, but thanks a lot for testing and helping
limiter121 said:
Too bad about the log, but thanks a lot for testing and helping
Click to expand...
Click to collapse
Checking the timestamp, maybe you should add a message to ask the user to wait for at least a minute to prevent nervous users like me from closing it too early.
Sorry for being new to this TA thing, I don't know how long I should expect.
stanley321 said:
Checking the timestamp, maybe you should add a message to ask the user to wait for at least a minute to prevent nervous users like me from closing it too early.
Sorry for being new to this TA thing, I don't know how long I should expect.
Click to expand...
Click to collapse
No problem, will add it in the next version
Thanks for bringing this in a simple form to MacOS
Already backup up, but did another backup and did the test; all seemed well.
New version 1.1 (2) available !
Download it here.
Changelog :
Added better log handling. You can now see the log files using Help -> Open logs folder
UI does not lock (beachball) anymore during lengthy backup/restore operations
limiter121 said:
New version 1.1 (2) available !
Download it here.
Changelog :
Added better log handling. You can now see the log files using Help -> Open logs folder
UI does not lock (beachball) anymore during lengthy backup/restore operations
Click to expand...
Click to collapse
make it for linux please :angel:
thanks
imen27 said:
make it for linux please :angel:
thanks
Click to expand...
Click to collapse
I will take a look, but don't get your hopes up
limiter121 said:
I will take a look, but don't get your hopes up
Click to expand...
Click to collapse
sounds great,many thanks
New version available
New version 1.1.1 (3) available !
Download it here.
Changelog:
Enabled verbose logging (for tracking down issues)
Big update
New version 1.2 (4) available !
Download it here.
Changelog:
Added auto-update support
Improved reliability (by using bundled BusyBox commands)
Bug fixes
limiter121 said:
New version 1.2 (4) available !
Download it here.
Changelog:
Added auto-update support
Improved reliability (by using bundled BusyBox commands)
Bug fixes
Click to expand...
Click to collapse
Thanks, mate. I think it worked. Just one question: is it normal that a 2MB TA partition gets zipped into few KB? Something like 77KB. Are those sizes (for both TA partition and zip file) normal?
Hello
Since my english is too bad, I let Google translate the text ...
Was in the Netherlands on vacation and in the host country a prepaid SIM used, which worked problem-free. Back home (Switzerland) no MobileNetwork connection is possible any more. APN was controlled with the provider (Swisscom) and seems to be correct. Receiving the configuration SMS failed, but "normal" SMS can be received and sent. Voice and WLAN works fine.
Deleting DATA, DALVIK and CACHE via TWRP did not help. Also did not help remove the battery. No system update or the like has been made in the meantime.
Does anyone have an idea, which I can still make?
System:
SM-N9005
CyanogenMod 13 by Temasek
Mod version 13.0-20161220-UNOFFICIAL-trader418-hlte
Android 6.0.1
Baseband N9005XXUGBP1
Thanks for support
APN.
Jogi_CH said:
Hello
Since my english is too bad, I let Google translate the text ...
Was in the Netherlands on vacation and in the host country a prepaid SIM used, which worked problem-free. Back home (Switzerland) no MobileNetwork connection is possible any more. APN was controlled with the provider (Swisscom) and seems to be correct. Receiving the configuration SMS failed, but "normal" SMS can be received and sent. Voice and WLAN works fine.
Deleting DATA, DALVIK and CACHE via TWRP did not help. Also did not help remove the battery. No system update or the like has been made in the meantime.
Does anyone have an idea, which I can still make?
System:
SM-N9005
CyanogenMod 13 by Temasek
Mod version 13.0-20161220-UNOFFICIAL-trader418-hlte
Android 6.0.1
Baseband N9005XXUGBP1
Thanks for support
Click to expand...
Click to collapse
I would delete APN settings and look them up in Google, input them manually.
ShaDisNX255 said:
I would delete APN settings and look them up in Google, input them manually.
Click to expand...
Click to collapse
Thanks for the tip, but I have already done. Have the APN-Settings deleted and newly created, nevertheless it does not work anymore.
Have also the file under /etc/apns-conf.xml.txt deleted and replaced by other version. Still does not work.
Is there a way to debug the error?
Jogi_CH said:
Thanks for the tip, but I have already done. Have the APN-Settings deleted and newly created, nevertheless it does not work anymore.
Have also the file under /etc/apns-conf.xml.txt deleted and replaced by other version. Still does not work.
Is there a way to debug the error?
Click to expand...
Click to collapse
You mean "apns-conf.xml"
Try to dirty flash your rom.
zlazaar said:
You mean "apns-conf.xml"
Try to dirty flash your rom.
Click to expand...
Click to collapse
Yes exactly, the apns-conf.xml I have deleted. Where are the manually entered parameters stored?
Unfortunately I have the original files of my ROM no longer, I would have to look first here again. Do you mean "dirty flash", the ROM over the already existing system flashen?
If I still knew how, I would only flash the modem again. The system works sunnily.
It is also funny that the SMS-APN configuration can not receive from the provider, but all other SMS arrive.
Jogi_CH said:
Yes exactly, the apns-conf.xml I have deleted. Where are the manually entered parameters stored?
Unfortunately I have the original files of my ROM no longer, I would have to look first here again. Do you mean "dirty flash", the ROM over the already existing system flashen?
If I still knew how, I would only flash the modem again. The system works sunnily.
It is also funny that the SMS-APN configuration can not receive from the provider, but all other SMS arrive.
Click to expand...
Click to collapse
User apn is stored in "/data/data/com.android.settings/shared_prefs/com.android.settings_preferences.xml"
Yes, i mean flash again the same rom over the existing one.
And sms don't need apn to work, only data and mms do.
zlazaar said:
Yes, i mean flash again the same rom over the existing one.
Click to expand...
Click to collapse
"Dirty flash" unfortunately did not help.
Search now a suitable modem and the guide to update only the modem.
Jogi_CH said:
"Dirty flash" unfortunately did not help.
Search now a suitable modem and the guide to update only the modem.
Click to expand...
Click to collapse
Unfortunately, the update or even change from the modem did not help.
Property therefore a complete new installation of a stock ROM. Then again TWRP and CM13, now everything works as before.
Thanks anyway
My solution for those with the same problem:
After deleting all the files didn't solve the problem, the following trick helped:
Plugged in an old, no longer working SIM from an Italian provider and waited for the message from the network operator, "SIM invalid". Then I plugged in my SIM and everything works again...