Database Users

Sky Raider ROM 3.3 Final [UPDATED: 10/12/10] FAQ & HOW TO

Decided to help out and with the ok from ihtfp69 i wrote up a FAQ page
for everyone who uses Sky Raider Rom 3.3 Final
feel free to add.
zip is 180,304 kb
Sense 3.3 Requires a FULL WIPE
to avoid reboots make sure you have S-Off, Upgrade the radio to the OTA version
Wipe everything:
Factory Reset
Data Cache
Dalvik Cache
then apply SR 3.3
The initial boot animation is only there for the first boot and reverts to the original thereafter.
The fix for Rom Manager for fix permissions requires you to open Rom Manager once and then it will work after a reboot
Q: How to flash the ROM?
A:good info here... http://forum.xda-developers.com/showthread.php?t=709220
Q: Since 3.3 requires a full wipe, due to all the changes, I was wondering if the MM mappings for the rosie launcher are still compatible with this new release.
A: All of the mappings are new so make sure you clear out the old ones and download the new ones.
Q:how to Change your lock screens from adb or terminal shellLock
A: there are 13 different lock screens including the HTC one
You must be on SP1 or higher to use them
Change your lock screens from adb or terminal shell
Type 'tabunlock' or 'rotaryunlock' to get the menu seen below
Please choose from the menu - S-OFF REQUIRED
1) normal
2) normal+menu unlock
3) normal+trackball unlock
4) music buttons
5) music buttons+menu unlock
6) music buttons+trackball unlock
7) restore HTC lock screen
8) get me out of here!
reboot
Q: how do you get a logcat?
A: Run CMD prompt and in while in the root folder sdk/tools/ run the command "adb logcat" copy paste all you see onto pastebin.com and post the link. or download logcat from market

"HTC Mail Mod for EAS Admin Removal" You just go to settings -> security -> remove admin policy

Any chance someone wants to actually put this on the wiki?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Droid_Incredible
There is a ROM section in there and would be a much better location than in a forum post.
What do you guys think?

supagene said:
Any chance someone wants to actually put this on the wiki?
http://forum.xda-developers.com/wiki/index.php?title=HTC_Droid_Incredible
There is a ROM section in there and would be a much better location than in a forum post.
What do you guys think?
Click to expand...
Click to collapse
up to our mod overground

Baseband version 1.00.03.03.06
hi
I am running SkyRaider 3.0 Sense RC3 but I have been unsuccessful in updating the radio. I've tried HBOOT but it doesn't like the image, tried renaming to update.zip, tried running the zip from Recovery.
Please advise.
thanks
Jack

Hello,
I would like to know what is "HTC Mail Mod for EAS Admin Removal". Is this some kind of feature?
I would like to disable the PIN Lock on my phone that is enforced by my companies security policy. I used to use LockPicker on Android 2.1 but that no longer works. Is there another solution for Android 2.2?
Thanks.
Nevermind I found it. You should add this to the FAQ. You just go to settings -> security -> remove admin policy (forgot the actual name since after I removed it, the option is no longer there)

Im having a couple of problems
1) I cant get my Yahoo mail account to set up, I have installed the Mail Mod from ROM manager.
2) I am trying to install an application from the market and i am getting the error saying I dont have enough space to install. I really dont have many apps so i dont think thats accurate. I have cleared the market's cache, data, and restarted the application, problem still persists.
Thanks for the help

surfboard3r said:
2) I am trying to install an application from the market and i am getting the error saying I dont have enough space to install. I really dont have many apps so i dont think thats accurate. I have cleared the market's cache, data, and restarted the application, problem still persists.
Click to expand...
Click to collapse
Check to see how many saved backups you have. Each backup can be upwards of 300mb's. If you have more than three that could be the problem. Happened to me once before. I got rid of a couple unnecessary backup files and freed up over half a gig of space. Apps from the market installed with no problems again afterward.

chrisloveskaos said:
Q: How to enable Tab Lock Screen with Sound Controls?
A: You need to remove the HTC lock screen to get to the underlying stock lock screen, get into Recovery, mount system, I go into adb shell to remove
cmd prompt
Code:
c:/sdk/tools>adb shell
~# (showsup) mkdir /system/app.disabled/
~# mv /system/app HtcLockScreen.apk /system/app.disabled/
~# exit
Click to expand...
Click to collapse
I keep getting stuck in a boot loop...

Stu_Gotti said:
I keep getting stuck in a boot loop...
Click to expand...
Click to collapse
There was a missing / between app and HtcLockScreen.apk

Can I just install SP2, or do I have to do SP1 first? ROM Manager is not pulling up SP1.....

gobluejd said:
Can I just install SP2, or do I have to do SP1 first? ROM Manager is not pulling up SP1.....
Click to expand...
Click to collapse
i thk just 2 is fine

Hi I just loaded skyraider 3.3 a couple days ago and tried out the lock screens, and up til now I've had no trouble loading the service packs or the lock screens thru ROM Manager but after activating a lock screen and rebooting thru terminal, I'm now stuck on the boot animation, batt pulls don't work, and I can get to recovery but I don't know what to do from there. Please HELP!!!!

m89maru said:
Hi I just loaded skyraider 3.3 a couple days ago and tried out the lock screens, and up til now I've had no trouble loading the service packs or the lock screens thru ROM Manager but after activating a lock screen and rebooting thru terminal, I'm now stuck on the boot animation, batt pulls don't work, and I can get to recovery but I don't know what to do from there. Please HELP!!!!
Click to expand...
Click to collapse
You have to let it sit for a good while... mine took like 5 minutes after changing the lock screen.

Is it normal for it to take up to 3 hours to complete? Cuz that's what keeps happening
Sent from my ADR6300 using XDA App

m89maru said:
Is it normal for it to take up to 3 hours to complete? Cuz that's what keeps happening
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
no only 5 mins maybe

Can you update this ROM please? I dont have any bugs that need fixing, but i realllly love this ROM and my A.D.D kicks in if i dont make some sort of change
Already added circle battery and 6bar hehe

Update what exactly though? If you have no bugs then the Rom is fine.
Sent from my ADR6300 using XDA App

m89maru said:
Update what exactly though? If you have no bugs then the Rom is fine.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Yes i know
How about the lockscreen update? I think he asked if there was any interest, i would love it! Basically eliminate the lock screen altogether

rsarno said:
Yes i know
How about the lockscreen update? I think he asked if there was any interest, i would love it! Basically eliminate the lock screen altogether
Click to expand...
Click to collapse
There icons that can b changed through metamorph. I made mods to mine with colored icons like bluetooth, car mode, sms, gmail, email. Two kinds of email- basic email app icon r have one made for me for yahoo. So now when I get a email a yahoo icon pops up in my notification. Ask a themer to make you some. Themes and apps has some. I suggest using sysinterwolf cuz he is the man.

[Q] mms fix ?

is there a fix for recieving very small mms on ginger builds for hd2 ??

Jarrett76 said:
is there a fix for recieving very small mms on ginger builds for hd2 ??
Click to expand...
Click to collapse
this has been asked many times already but ill be nice and tell you, open message app, goto settings, custom user-agent, custom, enter "NexusOne" without the " ". should work for you from now on.

montecarlo5 said:
this has been asked many times already but ill be nice and tell you, open message app, goto settings, custom user-agent, custom, enter "NexusOne" without the " ". should work for you from now on.
Click to expand...
Click to collapse
Here's the issue I have with that: It appears my current ROM does not have a custom UA. Therefore, I cannot apply this fix. Might you know of any other fixes?
Thanks..

[ ROM Release ] [group ING ROM】 【4/6 update the] U8800pro-CM7

CM updated the Lunar amendment sonic boom amendment, music player, SD card mounted to the probability of failure
Install the ROM:
1. Brush package downloaded zip do not extract directly into the SDcard on
has been holding down volume up + power button is turned on, do not release until well into the recovery mode
. recovery, volume up and down keys / menu Home key to move up and down the power button / search button to confirm the return key to return to previous menu.
(4) Select "Clear all data" restore factory
5. select from the SD card, select the Brush package "
re-election to select the ZIP file "
7 "from the SD card to find just download the zip Brush package to confirm
8. confirmed, Brush, wait about one minute to complete.
After brushing, back to the first menu, select "reboot the system immediately and restart the phone
10. and then patiently wait for a while, for the first time you start slow. Have a problem, bug, feedback ~! Not necessarily answer ~! Join to score it ~!
1, revised the definition camera, fix the WIFI MAC settings, fix BUG double click Caton 4, A screen to adjust touch [test] 5, and amendments to the call sound, adjust the volume recovery
http://www.mediafire.com/?esc1f7ci7z5crrr

Thanks for sharing, downloading

sewa2k said:
Thanks for sharing, downloading
Click to expand...
Click to collapse
Np..as i said lets give some power to our forum...its a bit slow but i will reuploaded when it finished!!

Testing, will post results later

http://www.wupload.com/file/2671411342/update-cm-7.2.0-RC0-u8800pro-Geno-120306.zip
Mirror

Siauka said:
Testing, will post results later
Click to expand...
Click to collapse
Updated from previuos ROM (120202) wiping only partition cache and dalvik cache, I don't know what is wrong but ROM was really laggy, USB storage mode didn't work, so I'm backing up to previous version. Maybe should try updating with full factory reset, but it would be to weird.

with full wipe USB mount storage working normally.
flashed this firmware but do not see any changes.

subzverb said:
with full wipe USB mount storage working normally.
flashed this firmware but do not see any changes.
Click to expand...
Click to collapse
Geno didn't give any changelog at least a good change log few minor fixes look first post just simply post it today with ics rom!!

pikachukaki said:
Geno didn't give any changelog at least a good change log few minor fixes look first post just simply post it today with ics rom!!
Click to expand...
Click to collapse
maybe he just changed data in the name of file ?

subzverb said:
maybe he just changed data in the name of file ?
Click to expand...
Click to collapse
CM updated the Lunar amendment sonic boom amendment, music player, SD card mounted to the probability of failure
Translated this is his changelog...fix some lunar calendar and something about music and sd...who know..geno's cm's are great as allways!!

What about the sound, still ****ed up?

I don't know, but I wish to know if in next updates it's possible to keep data, because it's very annoing to reinstall all apps from titanium backup (free).
I have update my old Ideos (U8150) today and I don't wipe anything.
Good work to all devs!

Found this rom has update:
released 12-03-07
Update the kernel correction WIFI connection, audio adjustments
dl(dot)dbank(dot)com/c0fteawj55
replace (dots) by . to enable url.
I am a new user and cannot paste links

yrxe said:
Found this rom has update:
released 12-03-07
Update the kernel correction WIFI connection, audio adjustments
dl(dot)dbank(dot)com/c0fteawj55
replace (dots) by . to enable url.
I am a new user and cannot paste links
Click to expand...
Click to collapse
Did you test it?

Filatov.p said:
Did you test it?
Click to expand...
Click to collapse
This is geno cm but there are no big changelog so i didn't upload them!!if you wanna use them feel free!!

pikachukaki said:
This is geno cm but there are no big changelog so i didn't upload them!!if you wanna use them feel free!!
Click to expand...
Click to collapse
It would be better if i had never done it... Stuck on Huawei flower after installetion. Nevermind, waiting for Aurora updates

Using this rom for more than two days.
No bugs found.
No restarts.
Antutu result with 1ghz 3105
with 1.5 ghz 3948
Wifi working as expected.
haven't found something wrong with sound, actualy could you point me what was wrong with it?
No exceptional battery drain noticed.
I am happy with it! however I am very waiting for kernel 3 for aurora

When the screen turns off, so does wifi for some odd reason. Is it just me or does anyone else have that problem?
Sent from my iPad using Tapatalk

Yes, march 6 update has wifi error.
However fix was provided day later by geno.
dl.dbank.com/c0fteawj55
here is link for fixed rom.
Using since last week.

yrxe said:
Yes, march 6 update has wifi error.
However fix was provided day later by geno.
dl.dbank.com/c0fteawj55
here is link for fixed rom.
Using since last week.
Click to expand...
Click to collapse
Can I just flash over without wiping data?

[Q] No phone-network after ICS CM9

Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me or, somehow try to help me. I'm willing to try out things....
Cheers.

You tried changing your baseband??
Sent from my Defy+ using Tapatalk 2

Baseband is not initialized/installed. In the first pic, it shows the baseband as 'unknown'. Select proper baseband matching your country from Baseband Switcher (settings -> Advanced->Baseband Switcher) and reboot your phone.

andr0idfreak said:
... Select proper baseband matching your country from Baseband Switcher (settings -> Advanced->Baseband Switcher) and reboot your phone.
Click to expand...
Click to collapse
Baseband is by default on Europe > Central Europe > 3.4x 900/2100 MHz which is not right for me. Should be America > Brasil > TIM 3.4.2-107-9 850/2100 Mhz.
The problem is, as I mentioned, that the phone does not save any settings. After the reboot the Baseband comes back to the default setting.
I already did the wipe factory/reset, wipe cache partition and wipe dalvik cache many times before/after flashing a ROM (and event deleted the dalvik cache folder via terminal emulator since it wasn't asking for confirmation when deleting via cwm) but didn't really change anything...
Any idea what's leading to the settings not being saved?
Thank you for helping.
PS: I didn't play with partitions, but as I've read in this post, of a similar problem, that this might be the case, I'll post the screenshot of the command df just in case...

fbugnon said:
Baseband is by default on Europe > Central Europe > 3.4x 900/2100 MHz which is not right for me. Should be America > Brasil > TIM 3.4.2-107-9 850/2100 Mhz.
The problem is, as I mentioned, that the phone does not save any settings. After the reboot the Baseband comes back to the default setting.
I already did the wipe factory/reset, wipe cache partition and wipe dalvik cache many times before/after flashing a ROM (and event deleted the dalvik cache folder via terminal emulator since it wasn't asking for confirmation when deleting via cwm) but didn't really change anything...
Any idea what's leading to the settings not being saved?
Thank you for helping.
PS: I didn't play with partitions, but as I've read in this post, of a similar problem, that this might be the case, I'll post the screenshot of the command df just in case...
Click to expand...
Click to collapse
Though the problem seems quite different but it might be your baseband switcher..
try BBs_v4
It might work.

neo.ank said:
Though the problem seems quite different but it might be your baseband switcher..
try BBs_v4
It might work.
Click to expand...
Click to collapse
Thanks. I was able to change the baseband with this app (and somehow keep this setting after a reboot - see screenshots), but under "About phone" still shows as Baseband version Unknown. And I still have no network signal...

Meanwhile... the matter with partitions and settings lost after reboot:
I know a litte of Linux, but I don't understand Android's structure or how it deals with partitions, but I might have found something:
In Bootmenu Recovery > Advanced > Show Log reads:
Bootmenu Recover v.5.0.6
I:Chechinkg arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.service.adv.enable=0
ro.factorytest=0
ro.usb_mode=normal
ro.bootmode=reboot
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=0x0000
ro.hardware=mapphone_umts
ro.revision=0
I:Cheching for extendcommand...
I:Skipping execution of exetendcommand, file not found...
W: failed to mount /dev/block/mmcblk1p25 (Invalid argument)​
As I see that in the system there are others blocks with similar names (screenshots in post #4), I was wondering if this might be related to the problem I'm dealing with (loosing settings after reboot).
I see some people had problems with this block/partition, for instance in this post - Issue with /dev/block/mmcblk1p25, but I couldn't figure out how they fixed.
Any help is much appreciated.

Hi fbugnon,
I have the same problem on my Defy. I've tried to use 2 differents builds from wdscript.fr (120613 and 120610), installed baseband switcher, but the problem is the same as yours.
Everytime the phone restarts, it resets all settings.
I'm trying to use a build from quarx (quarx2k.ru, build 120305) now, let's see if that helps.
I'll keep you updated.

Hi tiagomelo,
I've tried many differents ROMs but no one was able to change this behavior. I'm not sure, but I believe the problem is related to the partition error mentioned on my last post -- do you also have the same problem?
I was forced, eventually, to do a full SBF with Tim's original system so that I could use my phone and now I'm using CM 7.2 rc3.... Waiting for ICS to solve the calendar sync bug which is crucial for my work and then I'm back on.
Wish you good luck! And please keep us posted, I would like to know where this will lead you to.
Cheers

[B]it does not save the setup[/B], each boot is a new phone with new configuration s
fbugnon said:
Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me of, somehow try to help me. I'm willing to try out things....
Cheers.
Click to expand...
Click to collapse
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....

Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
What ROM are you using? Your build version. And is the problem exactly as described in OP, then I see that its been resolved.

A bit same like yours
Guys i dont know if if i can help you over here but i was some issues with the call/data/3g ... for me as soon as i tried using them they froze completely, not the phone but the signals .. its was related to my baseband settings and stuff,
so i found a solution for this ...
go into recovery cpu settings,
Status: enable
Enable all modules
Scaling: Conservative
dont forget to save at bottom and reboot
if these settings worked for you then it should be alright
This is just a suggestion to the issue .. u can try it .. I don't know if it is %100...
for me it works

ibtihaaz said:
Guys i dont know if if i can help you over here but i was some issues with the call/data/3g ... for me as soon as i tried using them they froze completely, not the phone but the signals .. its was related to my baseband settings and stuff,
so i found a solution for this ...
go into recovery cpu settings,
Status: enable
Enable all modules
Scaling: Conservative
dont forget to save at bottom and reboot
if these settings worked for you then it should be alright
This is just a suggestion to the issue .. u can try it .. I don't know if it is %100...
for me it works
Click to expand...
Click to collapse
That's a different thing. The reason for your freeze would be something with your CPU/chipset.

Good to see someone who is familiar with this issue of mine ..
so would u b able to tell me why i was having this problem with the chipset/cpu related to calls and data download ...
i know its not the right thread but i tried other thread but no answers yet
i came across this solution after a lot of seaching .. trial n error
u dont know what i've been through ... but using this settings doesnt give me good downloading speed in google play though

Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
Hi Ajitnegi,
As mentioned before, the only solution I could find to this problem was restoring the orignal ROM (Motorola's) by doing what they call a full SBF (you can read a bit about sbf in here or in posts on this forum).
Sorry not being able to help any further. Good luck.
Cheers.

Same problem | No network connection
Hi
I am also facing the same problem, no network connection. After going through this post where you had asked to change the baseband settings to the country specific, I did change it. Unfortunately, even after changing the baseband settings, after reboot it changes to default value (.i.e. Central Europe).
While going through this forum, I could not find any final settings provided by the developer, did you get any ? If so, can you point out to it.
Thanks,
Nash
fbugnon said:
Hi,
I've used CM7 and CM9 before with no major problem. But probably did something wrong because after flashing couple of ICS ROMs my phone (Defy-red lens) became unusable with 2 problems:
- no mobile network connection (no phone-calls, no SMS, no 2/3G)
(Wifi and Bluetooth are OK)
- it does not save the setup, each boot is a new phone with new configuration setup.
I've tried different ROMs (CM9, Quarx, Skanky, etc) with different Kernels (7 & 9), but nothing seems to change this behavior.
The phone also doesn't recognize the IMEI and can't search of operators. I've attached some screeshots.
I was wondering if someone else could share their experience with me of, somehow try to help me. I'm willing to try out things....
Cheers.
Click to expand...
Click to collapse

Ajitnegi said:
I have same problem with my phone also...........I search but not able to find out any fix for this...
Can any one help me fix it. I am not able to use my phone
Please help me out .... .....
Click to expand...
Click to collapse
Hi Ajitnegi
I don't know if this is the only way to fix it, but In order to recover MY phone I had to flash a full SBF, which is -- as I understand -- basically a Motorola Recovery that works pretty much like a factory reset. Search the forum and I'm sure you'll find someone explaining how to do it.
Or if you rather take some time to better understand what's going on with your phone before you start flashing it, you might want to take a look at this excellent "All-in-one Defy Beginner's Guide".
Cheers

i have the same issue, i have No Network and No Wifi
after flashing CM9 on my SGW from stock ROM
Help please .

[Q] Integrated Phone Directory Without Google?

Someone can tell me if the latest nightly include the "Integrated Phone Directory Without Google"?
I think I have the Google Dialer in my device and I want to change it. How can I do?
Thanks

jmarks205 said:
Someone can tell me if the latest nightly include the "Integrated Phone Directory Without Google"?
I think I have the Google Dialer in my device and I want to change it. How can I do?
Thanks
Click to expand...
Click to collapse
flash gapps that dont override the dialer apk

Thanks for the answer.
The first time I installed the OmniRom,, I flashed the Gapps and also the Google Dialer Addon Module.
Now I want to uninstall it and return to the original dialer of the Rom but don't know how to do.
Someone can help me?

Boot to recovery
Full backups
Wipe /system
Flash
1 OmniROM
2 SuperSU
3 Gapps of your choice
---
Posted from whatever phone booted today

jeffsf said:
Boot to recovery
Full backups
Wipe /system
Flash
1 OmniROM
2 SuperSU
3 Gapps of your choice
---
Posted from whatever phone booted today
Click to expand...
Click to collapse
Thanks for answer.
Will follow your suggestion when a new nightly is released.

Does anyone know when it will be provided the "Integrated Phone Directory Without Google"?

jmarks205 said:
Does anyone know when it will be provided the "Integrated Phone Directory Without Google"?
Click to expand...
Click to collapse
It's already included for more than a month.

In call settings I activated the option "Enable suggestions" but when searching in the dialer don't have suggestions of phone numbers of nearly places, appear only the numbers that are in my phone book.
Anyone can help to explain/solve this issue?
Thanks

jmarks205 said:
In call settings I activated the option "Enable suggestions" but when searching in the dialer don't have suggestions of phone numbers of nearly places, appear only the numbers that are in my phone book.
Anyone can help to explain/solve this issue?
Thanks
Click to expand...
Click to collapse
Openstreetmap may not have good data for your area. Add some! openstreetmap.org

@Entropy512, thanks for the answer and suggestion.