Related
Whenever I connect my MDA Vario to my PC (Dell 700m) I get the blue screen of death which says there is a driver issue. Dont know what to do at all. How to delete drivers? Which drivers to delete?
I'm sure someone must have had this problem, but a search turned up nothing.
Please help =)
If u r using kaspersky antivirus you'll have to get rid of it. It was my problem. When I started using another antivirus, problem has gone.
Greetings.
Thanks for the suggestion, I tried shutting down Kaspersky but I still got the error. I can try an uninstall.
Microsoft's Crash Analysis gives me the following:
Error report summary
Error type: Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean?: Windows has encountered an error from which it cannot recover and needs to restart
Cause: Unknown device driver
Computer symptoms: A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
You have to remove kaspersky. Or sync via IR.
Wellcome
Hi, I am using Kaspersky Anti-Virus and have no problems! 8)
So there might be another incompatibility.
Do you use Active Sync 4.1 ??? The older version 4.0 came with my device and didn't work.
this is my experience, I am using ActiveSync 4.1+WinXP Pro+NOD32+Sygate Personal Firewall...
once I connected my mini s to the pc, Sygate like other firewall software asked me for permittion regarding the usb connection...I permitted for sure....
but the initialisation took more 15mins, and the screen freezed....I tried several times and it happened every time...
then I connected my old PPC (with PPC2003)to the pc, nothing goes wrong....
finally, I EXIT the firewall, quit it...not just "allow all traffic"...then the connection works smoothly......
the problem is I need to quit the firewall before I start ActiveSync...
Im using activesync 4.1, so that should be no problem.
Got it to work!!! Killing Kaspersky did the trick.
Thank you
with older versions of kav, u have to switch off lan scan.
for example, with kav 5.0.225 wks, no pb.
I was thinking of switching to Panda anyway
Thanks for everyones Help, very appreciated!
I updated the ROM and the wizard seems to be working much faster, and no more error messages.
mikeusc said:
Got it to work!!! Killing Kaspersky did the trick.
Thank you
Click to expand...
Click to collapse
Anytime
It's the Kaspersky Anti-Hacker that causes the problem, the Anti-Virus and Spam applications are fine.
I was using Kaspersky Personal Pro and I got that Blue Screen. Unninstalled it and everything work fine now.
I’ve searched, and whilst there are a few thread on similar themes, nothing quite seems to help me with the issue I’ve got.
When I try to open some applications I’ve installed, i get the error message “The file xxx cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.”
Reinstalling the applications in question does not help.
I've read various threads saying you should change the security settings on your device by using a program on your desktop PC called Security Configuration Manager. That installs and opens fine, but won't connect to my device, which is recognised and connects just fine using Active Sync. i've tried this on two PCs i have, and neither recognises that the device is connected.
Other thread suggest altering certain registry settings. I've tried to do that from my PC using CeRegEditor, but I get the message "Access not allowed" when I try and save the changes i want to make.
Another thread suggests a program to create certificates, but I'm not at all sure about what this means or how to go about it, or even if it's going to solve the problems I'm encountering.
Surely there has to be some way of changing a setting somewhere, so that an application can be used without it having to have a valid/signed security certificate?
Can anyone help me please? Here's hoping...
Sorted...
The issue cleared itself - how strange!
Drakosha said:
Hello to all!
I think, I've finally found the reason why Chevron almost never works. After a few days of struggle, I managed to successfully unlock my HD2 three times in a row, all by the same trick.
The idea is to change the IP which Chevron emulates DURING the process of jailbreak. Here's step-by-step.
1 - Disable LAN card in your PC (Control Panel\Network and Internet\Network Connections\ right click on "Local Area Connection" and choose "disable"). It is very important to disable ALL connections, but you MUST remember which one is used for Internet access (see below, why).
2 - Do all the standard steps of unlock - install certificate, start WPConnect e.t.s. When Chevron fails to unlock - LEAVE IT OPEN.
3. Start Notepad and open hosts. Delete lines added by Chevron (at the bottom). Save. LEAVE NOTEPAD OPEN.
4. Press Win+R and enter IPConfig /flushdns , press "enter". CMD window will blink for a second - that's normal.
5. Press Win+R again (there will be IPConfig /flushdns typed already), but DO NOT PRESS "ENTER", just leave this window open.
6. Now the trick. Start WPConnect. WHILE it connects, continue to repeatedly press "Unlock" button in Chevron, until the black CMD window of WPconnect disappears. Chevron will fail to do its job, but that's in fact is the very thing we need.
7. Now, do not touch Chevron window, just return to Network Connections and ENABLE yor LAN card.
8. Go to Notepad and JUST CLICK "Save", do not alter anything inside.
9. Return to the window with the typed command IPConfig /flushdns . Press Enter.
10. Start WPConnect, WAIT until it disappears, and press "Unlock" button in Chevron. You're done - this time unlock would work.
At least, it worked for me 3 times in a row, while NO other ways worked.
Best regards - Draco.
P.S. If you have firewall - disable it before doing anything.
P.P.S. Win7 from NAND + MDJ Desire HD 4.4 from SD = best phone in the world
Click to expand...
Click to collapse
I have followed other guides posted here before, but none is as reliable as this one. Flawless. (Note that Zune is not required at all during this process, WPConnect is used)
Extra precautions :
1) Make sure port 443 is not used. You can open command prompt and type netstat -aon. From there, check which ip ends with 443 and check its PID number.
Once you have acquired the PID, go to command prompt and type tskill <PID number>.
2) Close skype.
3) Turn off your antivirus / firewall.
4) Make sure that during executing WPconnect.exe you're phone should NOT in be in sleep-mode/locked.
5) Make sure your host file located in C:\Windows\system32\drivers\etc\ is not read-only.
Credits to member Drakosha.
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
dissa said:
Thanks for the guide.
I am a noob.. so... what is WPConnect? Sorry for the stupid question.
Thanks in advance.
Click to expand...
Click to collapse
WPconnect is an executable used to connect your PC to wp7 devices without having to open ZUNE.
You can find out more about it here http://forum.xda-developers.com/showthread.php?p=10609273#post10609273
I test all solution, why not these one? I will reflash WP7 and test
Thanks for the TIP !
Ok.. now I know.. but the major problem is that I have Windows Xp.. so no chance to try tha trick... :-(
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
birel3107 said:
As I click on WPConnect.exe it just blinks for 1 second an closes then. What am I doing wrong?!
Click to expand...
Click to collapse
Can you read what is says in the window before it closes? Usually WPconnect just opens for 2-3 seconds and after a connection is established it will close back. If it says "Connection is established" or something like that, means you're good to go.
Read the steps carefully.
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
or this one!
yeah, that's just the same as I get when running WPConnect.
Yes but does it solve your problem?
I post 2 screenshot;
-Compltly close Zune
-Connect the device
Here's what i did, connect the phone to PC via USB, let zune opens and sync. Then close zune. Rune WPconnect.exe. It should say "Trying to establish a connection with blablabal" then "Connection established" and it will close. Try that.
G-ThGraf said:
Ahah, i remove WP7 from my device but i test WPConnect, got the same problem... So i made a quickscreenshot, to see the error message, this is it !!
Click to expand...
Click to collapse
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Niglet said:
You mean you dont have WP7 on your HD2 and you try WPconnect with it? That wont work. Anyways also make sure you're not in sleep mode or lock mode when you use wpconnect.
Click to expand...
Click to collapse
No it was for help birel !
Sent from my HTC HD2 using XDA App
I made it 3 times and it works !
BIG BIG Thanks!
G-ThGraf said:
I made it 3 times and it works !
BIG BIG Thanks!
Click to expand...
Click to collapse
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
I'm from Russia. sorry for my english. stll, not working for me, i'v done all steps, but can't unlock my hd2.
birel3107 said:
how was the setting on the phone? Language, region, flight-mode (on/off), wlan, date/time (automatic).
Click to expand...
Click to collapse
Hum, only (no lock--> set to never..)
I did, step by step what |OP| Posted !
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Improve said:
I got so excited when I found this particular thread. Of all the hacks and mods for Chevron out there this one seemed to be the most realistic solution. I have to XP machines. I managed to install Windows Phone Development Tools on one(everything works except emulator and debuger) I downloaded the WPDTOctober2010Update_en.msp, and insured it installed to C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe.(REBOOTED)
After I set up my HD2(again) Followed all the sugested settings, and downloaded Chevron cert via WIFI email. I began the steps on the 1st post.
1) I disabled all connections
2) I plugged in phone and through file explorer double clicked on WPConnect.exe and I got this error
" C:\Program Files\Microsoft SDK's\Windows Phone\v7.0\Tools\WPConnect.exe is not a valid Win32 application."
I bet if I had WINDOWS 7 this would not be the case. Any help, advise solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
This is the one that i use on Windows Seven 64 bits Ultimate
AS ABOVE
i've followed the steps , dont say im a leecher cause i read through all.
host file checked - no window developer services
regedit.exe - edited the registry
installed zune
installed microsoft sdk
activation code - gotten
network adapters were disabled when trying the steps below
so how i go about doing this and it doesnt work
1 : connect phone and install cert
2 : start WPConnect.exe to establish a connection
3 : Start zune
4 : place unlocker at C:\
5: error messages pops out .
tried on my laptop and desktop all same problem.
PS , ive been doing all this for two days , researching every night till3am while i have school next day. i have no idea what i still need to do.
Try to restart the computer, maybe some IM software took the port 443
Thats what I did
any other help ?... i check for the port too already. i will try it now again
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
TheATHEiST said:
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
Click to expand...
Click to collapse
tried , no avail
lionhart1001987 said:
tried , no avail
Click to expand...
Click to collapse
thats it ? ... no help ?
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
Why are you quoting yourself??
Also people have tried to help you, Yu are obviously doing something wrong or there is something on your pc that is blocking your connection, try and read some guides and disable anything that could potentially be blocking it.
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
OK start up your mobile. Is the date and time correct (Very important) if all ok then start zune. open up the chevron on c/drive and see if it will connect with ot the Ohno message.
You may have to do this a few times. try the other computer as well.
Some guy's can get the chevron to work, by puting the date a few months forward NOT back.
If you do manage to get the chevron unlocked, then dont lock it.
Make sure to swith off spyware detectors, and put your antivirus into stand by mode until you complete this tasks.
and read this thread: http://forum.xda-developers.com/showthread.php?t=912218
Russ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Do NOT Download yet Due to BUGS!]
OEM Changer changes the OEM of the Windows Phone Store with the click of a button. You don't need to configure fiddler settings or create a proxy server. Using the proven exploit in the Windows Phone Store using a proxy server and fiddler, This application automates the process with one click of the mouse.
OEM Changer is installed using an extremely simple process that will be explained in the instructions below.
BEFORE INSTALLING:
Make sure Fiddler for .NET 2 or .NET 4 is installed. The application itself works on .NET 2 or later.
INSTALLING THIS APPLICATION:
First, you need to download the application. It can be downloaded from the below "Attachments" section.
Next, extract the .ZIP file and save the extracted file where you woild like. It can be in Program Files, Desktop, Documents, etc.
Open the .EXE contained in the file. Do not touch the config file, it will break the application.
Once the EXE is open, you have installed and ran the application. Enjoy.
Once you open the application, if you are running Version 1.7 (Latest), the application will look like this:
To begin using it, put the phone manufacturer your phone is made by in the first box. In the second box, put the OEM you would like to use. Then, click "Make Changes".
Once you change your OEM, a window will appear with a proxy and instructions. This is the proxy you will use. The window looks like this:
Next, go onto your phone and open the settings. Go into Wifi and select your primary WiFi Network until you see a screen like this:
Now, put the information shown on your computer (The IP and Port) into the IP and Port boxes on your phone. Save the proxy, close the Windows Store, and reopen the store and begin downloading apps created by other OEMs.
THINGS TO NOTE ABOUT DOWNLOADING THESE APPS:
Some of them may not support the resolution of your device's screen.
UPDATE CHANGELOG:
1.0 - IR (Initial Release)
1.5 - Fixed bug preventing the opening of the application. Added proxy support.
1.6 - Added Huawei support. Added Huawei Libraries.
1.6.5 - Replaced outdated and non-optimized code. Replaced the duplicate-copy method used to put the libraries and the macro files in their correct places. Non-duplicating cuts file size in half.
1.7 - Major Update removing the application's dependency on macros. Now, the application uses a more standard and, overall, better technique to do the same thing as done in previous versions. Also, I have reduced the file size by 4.2 MB. In addition, the UI has been remodeled to work more fluidly and is now much easier to use. Also attempted to fix IP bugs. May not work on some computers. Also, Fiddler now opens automatically and closes automatically. No work for you to do this. Now works on .NET Framework 2.0!
1.7.5 - Hotfixes, Automatic Startup Config, Progress made on IP Bug.
Works great now!!! Thank you!!!
tonbonz said:
Works great now!!! Thank you!!!
Click to expand...
Click to collapse
NP. Also note I have just updated the file with some bugfixes if you are encountering any bugs.
has someone managed to download nokia apps on ATIV S after doing this?
is there a risk for using this program?:victory:
shayx said:
has someone managed to download nokia apps on ATIV S after doing this?
is there a risk for using this program?:victory:
Click to expand...
Click to collapse
There are no risks as it is running off of your personal computer and does not connect to any servers, or really anything that could install a virus/malware to your computer. On the phone side, there are also no risks. The application spoofs the OEM-Specific applications to install like any other windows phone application. The risk is essentially the same as installing any other windows phone application.
To awnser your second question, the program will install on a ATIV S. Just set the first box to Samsung and the second to Nokia.
iPwnza said:
There are no risks as it is running off of your personal computer and does not connect to any servers, or really anything that could install a virus/malware to your computer. On the phone side, there are also no risks. The application spoofs the OEM-Specific applications to install like any other windows phone application. The risk is essentially the same as installing any other windows phone application.
To awnser your second question, the program will install on a ATIV S. Just set the first box to Samsung and the second to Nokia.
Click to expand...
Click to collapse
thank you! will try it out. sounds great.
Getting this error when starting Fiddler:
[/URL]
Uploaded with ImageShack.us[/IMG]
cevi said:
Getting this error when starting Fiddler:
[/URL]
Uploaded with ImageShack.us[/IMG]
Click to expand...
Click to collapse
Have you added any rules before installing this program? If so:
Uninstall and reinstall fiddler.
Restart fiddler, make sure it works.
Open my application and click "Clear changes". Click OK to any errors, warnings, or info boxes.
Now run the OEM changer normally and see if it works now.
Ok i`ve reinstalled Fiddler now and i`ve managed to bypass this error. Probably because first i installed Fiddler for Net.2 and then over that same installation i`ve installed the Net.4 version.(Not sure about this).Now when i put the proxy in the advanced wifi settings i get no network even it says connected.Tell me this.Do i have to first open the 8888 port in the Firewall because i`ve turn it of the both with the antivirus and still not managed to get connected.
cevi said:
Ok i`ve reinstalled Fiddler now and i`ve managed to bypass this error. Probably because first i installed Fiddler for Net.2 and then over that same installation i`ve installed the Net.4 version.(Not sure about this).Now when i put the proxy in the advanced wifi settings i get no network even it says connected.Tell me this.Do i have to first open the 8888 port in the Firewall because i`ve turn it of the both with the antivirus and still not managed to get connected.
Click to expand...
Click to collapse
I'll do some testing and see if it works with only .NET 4. Also, for your other issue. This is a known issue and is easy to fix:
If you have multiple devices or software connected that create an IP (Connected printers, the Windows Phone Emulator for example), my app will detect that IP as the one you are using. To fix, open command prompt and type "IPCONFIG". Scroll up to the top, until you see the text "Windows IP Configuration". Now look for the names of all of the network adapters. Try each one you see until you find the one that works. To try one, under that adapter name, look for "IPV4 Address". Put that into your phone.
iPwnza said:
I'll do some testing and see if it works with only .NET 4. Also, for your other issue. This is a known issue and is easy to fix:
If you have multiple devices or software connected that create an IP (Connected printers, the Windows Phone Emulator for example), my app will detect that IP as the one you are using. To fix, open command prompt and type "IPCONFIG". Scroll up to the top, until you see the text "Windows IP Configuration". Now look for the names of all of the network adapters. Try each one you see until you find the one that works. To try one, under that adapter name, look for "IPV4 Address". Put that into your phone.
Click to expand...
Click to collapse
That`s exactly the same ip address that shows up in the ipv4 address on my wifi card (which is active) when i open cmd.Tell me about the port "8888".When i check it using Open Port Checker, it`s not opened.
Nice job!
cevi said:
That`s exactly the same ip address that shows up in the ipv4 address on my wifi card (which is active) when i open cmd.Tell me about the port "8888".When i check it using Open Port Checker, it`s not opened.
Click to expand...
Click to collapse
Ok. Port 8888 is the default port used by Fiddler. First, go into fiddler and go into Tools > Fiddler Options. Open the connections tab and make sure fiddler says "Listening to port 8888". If not, put 8888 in the box. Next, look for the "Allow remote connections to connect" checkbox and make sure it is checked. Fiddler should automatically open the port for you if these settings are selected, but if not, just port forward port 8888, make sure it is open, and try again.
Ok.The problem was that the macro at the end when it saves the text file, it closes Fiddler too.I did not noticed that in the beginning.Now works fine.
Thanks.
Sent from my Windows Phone 8S by HTC using Board Express
Click Change OEM and getting this Error:
"The specified executable is not a valid application for this OS platform."
And when I click Open Fiddler, getting this:
"The system cannnot find the file specified."
I install Fiddler and it run normally.
otakus007 said:
Click Change OEM and getting this Error:
"The specified executable is not a valid application for this OS platform."
And when I click Open Fiddler, getting this:
"The system cannnot find the file specified."
I install Fiddler and it run normally.
Click to expand...
Click to collapse
That's an error with Windows itself, not my app. What version of Windows are you running? If it's Windows XP or earlier, this application will not work. I'm working on an update today with numerous new features, wait until then and see if it works (If you are not running XP)
iPwnza said:
That's an error with Windows itself, not my app. What version of Windows are you running? If it's Windows XP or earlier, this application will not work. I'm working on an update today with numerous new features, wait until then and see if it works (If you are not running XP)
Click to expand...
Click to collapse
Hello,
thanks for the app. On german Win 7 x64 i always get an error after the dialog "configuration required". The app doesn´t create a config file.
Error:
Microsoft .NET Framework:
The system can not find the specified file.
Has somebody a solution for me? Fiddler runs without an error. I don´t know, which file is missing. Tested on 2 computers.
H3ng5t said:
Hello,
thanks for the app. On german Win 7 x64 i always get an error after the dialog "configuration required". The app doesn´t create a config file.
Error:
Microsoft .NET Framework:
The system can not find the specified file.
Has somebody a solution for me? Fiddler runs without an error. I don´t know, which file is missing. Tested on 2 computers.
Click to expand...
Click to collapse
Is this error message appearing after you apply an OEM Change? If not, just ignore the error and continue using the app.
I can't get that to work either. I am running Windows 8.1 x64 (German) which has .Net 4.0 already installed. I installed fiddler for .Net 4 but when I run the OEM Changer i get an error "The System can't locate the specified file". If I click "continue" the app starts and I can select current OEM and new OEM and when I click "make changes" I can see the fiddler splash screen for a split seccond. However, when I enter the proxy into my phone the phone shows the wifi as "connected" but I can not access anything online.
EDIT: Nevermind, I had to check the "Allow remote connections to connect" checkbox in fiddler. Now my phone can access the marketplace but the "Nokia Collection" section is emtpy now. I tried changing to HTC and Samsung Marketplaces.
iPwnza said:
Is this error message appearing after you apply an OEM Change? If not, just ignore the error and continue using the app.
Click to expand...
Click to collapse
The error message still comes on every startup. I always see messagebox hxxp://up.picr.de/15689246rn.png and after that the error message.
Localhorst86 said:
I can't get that to work either. I am running Windows 8.1 x64 (German) which has .Net 4.0 already installed. I installed fiddler for .Net 4 but when I run the OEM Changer i get an error "The System can't locate the specified file". If I click "continue" the app starts and I can select current OEM and new OEM and when I click "make changes" I can see the fiddler splash screen for a split seccond. However, when I enter the proxy into my phone the phone shows the wifi as "connected" but I can not access anything online.
EDIT: Nevermind, I had to check the "Allow remote connections to connect" checkbox in fiddler. Now my phone can access the marketplace but the "Nokia Collection" section is emtpy now. I tried changing to HTC and Samsung Marketplaces.
Click to expand...
Click to collapse
Same Problem here. Now i checked also "Allow remote connections to connect" checkbox in fiddler and then i can connect to marketplace. But i still have the samsung section only.