Hey guys I previously unlocked my phone to work on tmobile, i took it in the other day and they seemed to have changed something since now the phone isn't unlocked. i put it back to MDC modem and tried the ##3424# method but the build number is different than the baseband. the build number is JSS15J.L720VPUEMK2. Can anyone tell me what I need to change to make it work again?
-Sprint S4
-Unlocked then taken to TMo
-TMo put update
-Can't use it anymore
-Tried ##3424#
I appreciate any help!
Reading and searching are what's needed. And then not even much of that. Really there's an entire freaking guide.
PLEASE search, read. Then maybe some more searching and reading.
leaderbuilder said:
Reading and searching are what's needed. And then not even much of that. Really there's an entire freaking guide.
PLEASE search, read. Then maybe some more searching and reading.
Click to expand...
Click to collapse
trust me i have been looking, im on day 2 of the search... hope your link helps
leaderbuilder said:
Reading and searching are what's needed. And then not even much of that. Really there's an entire freaking guide.
PLEASE search, read. Then maybe some more searching and reading.
Click to expand...
Click to collapse
The link you gave me I used before, and this error came up
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NON-HLOS.bin
<ID:0/005> aboot.mbn
<ID:0/005>
<ID:0/005>
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
and now the phone doesnt connect to Kies to restore it, i already faced this problem, so please don't tell me to try to research, since I have been trying tmany different methods all day for the last few hours.
If anyone knows a way to go around this that would be great
Did you read through the entire thread(s)?
Are you really on the MK2 build INCLUDING BOOTLOADER? If so you CANNOT go to a build before MJA.
You said 4.3 and MDC but your build is listed as MK2 (possible by the way). But have you taken any OTAs?
What tar did you try to flash?
Seems like you tried to flash a tar from 'before' MK2 - with MDL or MDC. That cannot be done if you have the MJA/MK2 bootloader.
HOWEVER there are those that have [as mentioned in those threads] been able to flash MJA/MK2 tar and then go back a baseband/modem.
When you said you "took it in" do you mean to a Sprint store? And by changed something, they might have flashed it to a newer build version. Lets start with this. Can you please post a screenshot of your ABOUT PHONE page? That will atleast give people a starting point to know where your device stands.
Related
I've gotten rid of custom recovery and unrooted. But when i use odin to get everything stock back(mainly recovery) it fails. This is what i get, Any suggestions?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Were you on mf3 firmware?
It would seem that OP was not on MF3 because of the mention of getting rid of a custom recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Yeah I was originally on mf3 had Safestrap for a recovery. Pretty much tryin to get all original firmware so I can trade this phone in for that new Lg that's t I think blows this phone outta the water.
StlGucci said:
Yeah I was originally on mf3 had Safestrap for a recovery. Pretty much tryin to get all original firmware so I can trade this phone in for that new Lg that's t I think blows this phone outta the water.
Click to expand...
Click to collapse
If you're on mf3 Odin is not going to work. You're stuck where you are.
@StlGucci you can take it to bestbuy and have the samsung guy flash the mf3 firmware
That blows. Just to double check, So theres no way to get the stock recovery back? Because I have no recovery at this moment. Playing with fire lol
StlGucci said:
That blows. Just to double check, So theres no way to get the stock recovery back? Because I have no recovery at this moment. Playing with fire lol
Click to expand...
Click to collapse
No way other than bestbuy.
Sorry i know this isn't the forum for it. But hoping u might know. I got a Galaxy Tab 2 Hard Bricked trying to root. U mentioned that best buy guy can flash the firmware for the s4, Do you happen to know, if they could help me out by flashing the firmware on that also? And I've looked everywhere for a solution to the hard brick and all bad came up with nothin
Currently I'm running touchwiz on the latest 5.0 lollipop version. I've tried several different rooting methods and I keep getting stuck on this one error code in odin. Here are the codes:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.57.8-klte.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You can't install Philz on the Verizon S5 because the boot loader is locked. You can root OA8 using these instructions: http://forum.xda-developers.com/showthread.php?t=3020546 just make sure to go back to NK2 first then follow the old NCG root method.
Thanks this for sure helped. I got it to pass and work, but how long should it take, because my phone has been stuck on the verizon screen for about 10 to 15 minutes. My odin window said it passed so it should work, but how long does this take?
calebp123 said:
Thanks this for sure helped. I got it to pass and work, but how long should it take, because my phone has been stuck on the verizon screen for about 10 to 15 minutes. My odin window said it passed so it should work, but how long does this take?
Click to expand...
Click to collapse
I had that problem as well. I think you need to factory wipe from recovery (volume up+home+power on boot), but there might be a better way to fix the problem.
Hey man, thanks for all the help. I got it rooted, and I installed safestrap. Now I was wondering if I could install cm12 and lollipop on this device, you know of anyway?
calebp123 said:
Hey man, thanks for all the help. I got it rooted, and I installed safestrap. Now I was wondering if I could install cm12 and lollipop on this device, you know of anyway?
Click to expand...
Click to collapse
No, you cannot install CM12 or any other AOSP ROMs. With a locked bootloader and safestrap you are limited to only installing touchwiz (TW) ROMs based on the same build you currently have on your phone. For you that means TW ROMs based on BOA8. Look in the Verizon Galaxy S5 Android Development section, I think there are only two right now.
Currently I'm running on NK2 so are there any that you recommend for that, or is there anyway I could upgrade to lollipop?
calebp123 said:
Currently I'm running on NK2 so are there any that you recommend for that, or is there anyway I could upgrade to lollipop?
Click to expand...
Click to collapse
Same advice as I gave for the BOA8 ROMs, look in the development section for ROMs based on NK2, pick the one that has the most features you want or looks the best to you and try it out. For upgrading to lollipop, follow this guide:
http://forum.xda-developers.com/ver...l/how-to-update-to-g900vvru1boa8-5-0-t3020546
I had a friend come over who wanted me to root his Verizon Note 3. It had the latest version of Android available for it when I tried rooting, which, from what I can gather, is Android 4.4.2 or 4.4.4. I can't seem to find exactly what it was.
This is the guide I followed when I started. Immediately I knew something was wrong because Odin gave a FAIL output. I didn't think to grab that exact output, but this is what I'm getting at this stage:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here are the steps I'm taking based on this guide:
1. Downloaded latest Odin version.
2. Downloaded latest stock firmware (MJE).
3. Downloaded PIT file.
4. Reboot phone into Download Mode [Power + Home + Vol Down].
5. Open Odin.
6. Plug in phone. (Shows "Added!")
7. Choose PIT file and stock firmware (under "AP")
8. Choose Start.
This is where I get the error message. On the phone, it shows:
Code:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 3
I've been doing nothing but running in loops trying to fix this phone. I've tried so many different links and ran around to just about every forum I can find. If anyone has any advice, I really need to fix this as it's not my device.
otacon239 said:
I had a friend come over who wanted me to root his Verizon Note 3. It had the latest version of Android available for it when I tried rooting, which, from what I can gather, is Android 4.4.2 or 4.4.4. I can't seem to find exactly what it was.
This is the guide I followed when I started. Immediately I knew something was wrong because Odin gave a FAIL output. I didn't think to grab that exact output, but this is what I'm getting at this stage:
Code:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Here are the steps I'm taking based on this guide:
1. Downloaded latest Odin version.
2. Downloaded latest stock firmware (MJE).
3. Downloaded PIT file.
4. Reboot phone into Download Mode [Power + Home + Vol Down].
5. Open Odin.
6. Plug in phone. (Shows "Added!")
7. Choose PIT file and stock firmware (under "AP")
8. Choose Start.
This is where I get the error message. On the phone, it shows:
Code:
SW REV CHECK FAIL : [aboot]Fused 4 > Binary 3
I've been doing nothing but running in loops trying to fix this phone. I've tried so many different links and ran around to just about every forum I can find. If anyone has any advice, I really need to fix this as it's not my device.
Click to expand...
Click to collapse
MJE is not the latest....you will probably have to flash 4.4.4 (NC4 or NK1). You can NOT flash old versions one a newer version is installed.
Sent from my Note 3 via Tapatalk
donc113 said:
MJE is not the latest....you will probably have to flash 4.4.4 (NC4 or NK1). You can NOT flash old versions one a newer version is installed.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
Where do I find that? All of the places I've gone seem to show MJE. Do you have a reliable source where I can find the latest version at a reasonable download speed.
otacon239 said:
Where do I find that? All of the places I've gone seem to show MJE. Do you have a reliable source where I can find the latest version at a reasonable download speed.
Click to expand...
Click to collapse
You can get the latest 4.4.4 firmware from here: http://www.sammobile.com/firmwares/database/SM-N900V/ (if you think there is a chance that it was on 4.4.2 when you tried to root it with de la vega, then you may try that firmware first... Once you put 4.4.4 on it, there's no current root method for it and no going back to 4.4.2).
If you follow Droidstyle's restore guide and use the 4.4.4 firmware (or 4.4.2 if that's what it was on ), that should hopefully help you get the phone fixed. Here's the link to Droidstyle's guide: http://forum.xda-developers.com/showthread.php?p=46461911
mattnmag said:
You can get the latest 4.4.4 firmware from here: http://www.sammobile.com/firmwares/database/SM-N900V/ (if you think there is a chance that it was on 4.4.2 when you tried to root it with de la vega, then you may try that firmware first... Once you put 4.4.4 on it, there's no current root method for it and no going back to 4.4.2).
If you follow Droidstyle's restore guide and use the 4.4.4 firmware (or 4.4.2 if that's what it was on ), that should hopefully help you get the phone fixed. Here's the link to Droidstyle's guide: http://forum.xda-developers.com/showthread.php?p=46461911
Click to expand...
Click to collapse
This link is requiring a sign-up to download at 15 kb/s. The best download link I've found is Rapid Gator, which is limiting me to 40 kb/s. Are there any other faster sources for this file? I searched Google for maybe 15-20 minutes with no luck. Is this file so rare that no one has uploaded it to a more reliable/faster site (e.g. Mega)? I feel like this should be a much more common file than it is.
otacon239 said:
This link is requiring a sign-up to download at 15 kb/s. The best download link I've found is Rapid Gator, which is limiting me to 40 kb/s. Are there any other faster sources for this file? I searched Google for maybe 15-20 minutes with no luck. Is this file so rare that no one has uploaded it to a more reliable/faster site (e.g. Mega)? I feel like this should be a much more common file than it is.
Click to expand...
Click to collapse
Sammobile does require a free registration to be able to download from their servers, but I think most people would say it's a generally reliable source.... and they give a md5 to make sure you get a good download. Maybe you'll find something else if you spend enough time searching. Good luck.
mattnmag said:
Sammobile does require a free registration to be able to download from their servers, but I think most people would say it's a generally reliable source.... and they give a md5 to make sure you get a good download. Maybe you'll find something else if you spend enough time searching. Good luck.
Click to expand...
Click to collapse
I just finally got his phone back on and it's no longer bricked. Now I can't seem to get towelroot to work. I open it on his phone and towelroot claims it's not supported on his phone. Am I missing something simple? Anyone here that's rooted a recent Note 3?
otacon239 said:
I just finally got his phone back on and it's no longer bricked. Now I can't seem to get towelroot to work. I open it on his phone and towelroot claims it's not supported on his phone. Am I missing something simple? Anyone here that's rooted a recent Note 3?
Click to expand...
Click to collapse
Good to hear you got the phone working again. If you're on 4.4.4, then towelroot will not work and there's no current root method.
4.4.2 was the last build version for the Verizon Note 3 that's rootable.
Hi,
I have a SAMSUNG GALAXY S5 VERIZON and I treid to restore it to its stock rom using ODIN.
I have used every version of odin and I keep getting the same message:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900VVRU1ANCG_G900VVZW1ANCG_G900VVRU1ANCG_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried multiple PC's multiple cables and multiple STOCK MD5 files.
I am Able to get to download mode and recovery boot.
I have tried almost every troubleshoot posted online so far.
On download screen I get SW REV CHECK FAIL: [aboot]Fused 2 > Binary 1
URGENTLY NEED HELP!
Thanks guys
Need to know what build you were on before you attempted all of this. If you were on BOE1 or BOG5, you cannot ODIN back to a previous build. You will have to ODIN the same build you were on when you started this.
Most likely I had one of the two. I'll try to odin to same build.
My phone was on Android 5.1.1 stock.
YES! It worked. Thank you so much! I really appreciate taking the time to help me. Good to know people are still willing to help out!
Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out
Dark Karas said:
Hi I am having the same problem but I cannot find the stock file for 5.1 or 5.0.1. or whatever the newest version is if anyone could help out
Click to expand...
Click to collapse
Here you go. This is factory stock, it will locked your bootloader.
http://forum.xda-developers.com/verizon-galaxy-s5/general/g900vvru2bog5-factoryodintarimage-t3179527
I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.
Hollieanne said:
I am having the same issue as the OP but mine is 5.0 and was BOG5. Can you please help me fix it or explain to me how I can? I am a noobie at all of this.
Click to expand...
Click to collapse
If you're having the same problem, the solution is the same: Use Odin to flash the BOG5 system restore image that was linked in the post above yours.
To start out, I will say that I am not the best with this kind of stuff and do not know THAT much about rooting/flashing ROMs and what not. I have read many posts about how to go about doing this and here is what I tried. I downloaded Odin 3.11.1 and the most recent Android 4.4.4 version (USA) from SamMobile. I turned my phone off and put it into download mode. After this, I started Odin, and pressed VOL up on my device to continue. Odin said "Added". I selected the file to flash in the AP section (G900VVRU1ANK2_G900VVZW1ANK2_G900VVRU1ANK2_HOME.tar.md5) and hit start. This is what came up in Odin:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried this many times with all the USB slots on my PC and with 3 different cords. I have also tried different versions of Odin. I'm not sure if any of that would change anything, like I said, I do not really know what I am doing. Am I doing something wrong here? Any help is greatly appreciated! Thanks, Hunter.
geezlaweezuz said:
I have tried this many times with all the USB slots on my PC and with 3 different cords. I have also tried different versions of Odin. I'm not sure if any of that would change anything, like I said, I do not really know what I am doing. Am I doing something wrong here? Any help is greatly appreciated! Thanks, Hunter.
Click to expand...
Click to collapse
You cannot downgrade from BOE1, BOG5, BOK3, BPB1, DPD1, or DPF4. As of BOE1, the bootloader was fused to prevent downgrading.
If you do have a downgrade-able firmware still installed on your phone, then the most likely remaining problem is that the file you're trying to flash is corrupt or incomplete: compare the md5 hash
You can do a partial downgrade to kk 4.4.2 you will still have pb1 bootloader but it does work in s5 verizon general there is a thread by brens123 called I booted into ncg on pb1 bootloader you might be able to subsitute the nk2 firmware instead of ncg firmware using his guide