I've gotten rid of custom recovery and unrooted. But when i use odin to get everything stock back(mainly recovery) it fails. This is what i get, Any suggestions?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Were you on mf3 firmware?
It would seem that OP was not on MF3 because of the mention of getting rid of a custom recovery.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Yeah I was originally on mf3 had Safestrap for a recovery. Pretty much tryin to get all original firmware so I can trade this phone in for that new Lg that's t I think blows this phone outta the water.
StlGucci said:
Yeah I was originally on mf3 had Safestrap for a recovery. Pretty much tryin to get all original firmware so I can trade this phone in for that new Lg that's t I think blows this phone outta the water.
Click to expand...
Click to collapse
If you're on mf3 Odin is not going to work. You're stuck where you are.
@StlGucci you can take it to bestbuy and have the samsung guy flash the mf3 firmware
That blows. Just to double check, So theres no way to get the stock recovery back? Because I have no recovery at this moment. Playing with fire lol
StlGucci said:
That blows. Just to double check, So theres no way to get the stock recovery back? Because I have no recovery at this moment. Playing with fire lol
Click to expand...
Click to collapse
No way other than bestbuy.
Sorry i know this isn't the forum for it. But hoping u might know. I got a Galaxy Tab 2 Hard Bricked trying to root. U mentioned that best buy guy can flash the firmware for the s4, Do you happen to know, if they could help me out by flashing the firmware on that also? And I've looked everywhere for a solution to the hard brick and all bad came up with nothin
Related
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Sounds like a bad rom download. Download the rim again or get it from a sticky on xda.
Also it doesn't matter what com port Odin puts the phone on as long as it sees it.
Sent from my SPH-L720 using xda app-developers app
tordsrv 1892
im still fairly new at the whole rooting scene. could you possible link me to the stock rom? oh btw idk if this would matter but i think i had the MF9..
i just want to go back stock for now and get this phone to work.. than i will try again.. thank you in advance!
my uncle also said there is a odin file not the program. but an odin file that you use with odin program. is this true for the s4? if so could you link me to it also!
i just tried it again. and im getting this error now..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have read that that download fron QBKing is bad. As a poster above me said, download the rom from XDA instead and redo the process. Also, be sure to use the usb cable that came with your phone as others can cause the same issue. Also....if it fails again, try a different usb port. Good luck
Sent from my SPH-L720 using Tapatalk 4 Beta
could someone link me to the right post that has the sprint stock rom? thank you
texassoljaz said:
could someone link me to the right post that has the sprint stock rom? thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2382188
Last post
Sent from my SPH-L720 using xda premium
and ubuings
ok so.. i downloaded this stock firmware
http://forum.xda-developers.com/showthread.php?t=2258107
and it actually goes futher but than it said i dont have a pit file.. im sorry this is my first time and it is so hard to understand everything.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
texassoljaz said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MF9FirmwareAIO.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
could someone tell me wht it says no PIT partition? i have tried so many different stocks for the sprint phone.
im sure mines was the MF9. but i also tried the MDL and MDC.
Click to expand...
Click to collapse
Bot trying to scare you here but if you google the pit error people are being told its a faulty motherboard
Sent from my SPH-L720 using xda premium
same thing happen to my boys gs2 when i was flashing a recovery for him... same ishh.. all i had to do is use odin to unroot and flash a stock rom via odin.. its worked for me.. all the phone would do is go into download mode.. thats it.. no recovery and it wouldnt boot.. stuck in download mode.. i plugged it in to my pc.. odin noticed the phone i flashed stock unrooted rom.. phone rebooted at the end and everything was fine..one crazy thing was after that happen i tried to root again and flash a custom recovery and it happen again.. so i had to fix it again.. i just could not root that phone after that.. had to keep it stock.. my buddy was just happy to have his phone he didnt care about root after that!!
texassoljaz said:
OK so this is what i did. so i tried to root my s4, and in odin it said fail. so i took out the battery. and try to turn it on now it has the phone YELLOW triangle and a monitor. it says "firumware upgrade encountered an issue. Please select recovery mod in kies & try again.
what i have tried so far was download the sprint stock and odin it back. i used qbking77 . com the stock i used is linked on that website. which then links me to stockroms.net. so during the process of doing going back to stock it said fail. i read some where that in the id:com on odin, it should say 0:[COM6] and i read some where else that it does have to say com6 it could say com3. i dont know if that matters. and i also read on the forum they say to use another stock rom? is that also if so where can i get one besides from stockroms.net please someone help me..
this is what it says when i try to odin to stock:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Added!!
Click to expand...
Click to collapse
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
I tried what you said than it went to this
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
texassoljaz said:
I tried what you said than it went to this
Added!!
Odin v.3 engine (ID:7)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Complete(Write) operation failed.
Added!!
All threads completed. (succeed 0 / failed 1)
but now i have a loading bar on my phone. so i dont know whats going to happen i will leave it for a while to see what happens.
Click to expand...
Click to collapse
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
ROMANTiC KiD said:
Its not really a bad download, had this issue once before when I soft bricked my s4 and I needed to restore it back to stock. You need to delete the .md5 extension and leave it with the .tar extension and that should work! Good luck!
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
ROMANTiC KiD said:
Hmm weird. Redownload the file from qbking77 and delete the extension again. Also try it with a different version of odin for example the one that qbking uses v1.85 (which is also the one I use) and pull out battery and put the battery in and manually set it to download mode and try it one more time. Btw any chance did you get a pop up in your screen saying something about an error of some kind saying about a parameter before?
Edit: Also probably restart computer just in case also.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
texassoljaz said:
no i never never got a parameter error.. i also have window 8 do you think that will affect anything? i will try qbking than update you.. thanks for helping. greatly appreciated!
Click to expand...
Click to collapse
Hmm... alrighty. Nah it shouldnt affect anything but you can also try with other computer as well or different version of windows. No problem hope you get it solved soon!
Sent from my SPH-L720 using xda app-developers app
so after trying it. i got a parameter error. what does this mean?
so i end up getting this far.. do you know how to fix this?
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Added!!
i dont get it. so i got it to start the green bar in on odin.. than all of a sudden it say fails. and one my phone the blue bar went half way
yessss!!!!! i got
Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?
Your on the mf3 firmware. Odin won't work. I can tell because of the "fused 2" in the Odin printout
Thanks. Is there a way to unroot it?
tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Can you boot now? If you can unroot in super su.
tcow24 said:
Thanks. Is there a way to unroot it?
Click to expand...
Click to collapse
Yes there is, I'm guessing you are able to boot to your phone?
Here's a link and instructions you can follow. Good luck and report to us how it goes
http://forum.xda-developers.com/showthread.php?p=45340743#post45340743
It worked! Thanks JD and haremmon. I feel like an idiot for not seeing that thread.
I need some help please?
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.
markdthor28 said:
I have a Galaxy s4 rooted and I wipe the system and rebooted... I was installing a rom and did not even think anout restoring my old ones. so know I am stuck and the phone will not go into twrp, all it dose is beeps evey 3 seconds. I can get to odin download and i have downloaded stock fimware md5 files and only had one not fail on me using odin3. but it dose the same thing beeps and still can not get to recovery.. please help this is frustrating.
Click to expand...
Click to collapse
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.
h11wiscan said:
pull battery,
put battery back in,
boot into odin using the physical keys (home+volume down+power),
then when it says press volume up to boot into odin, or volume down for cancel choose volume down.
Might boot up normally, i have the issue to where to recovery is messed up, all i need is the 'install-recovery.sh' but no one who has a rooted S4 running MF3 has responded to me yet..ill let you know if i fix the recovery that way.
Click to expand...
Click to collapse
At this point, I don't know if you'd be able to fix it that way. The only option that many users have been doing is going to best buy with a Samsung experience area and having them reflash the MF3 firmware.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
tcow24 said:
Apologies if this has been asked before, but I tried checking everywhere for a solution and couldn't come up with anything.
I have an AT&T Galaxy S4 I337. I rooted it, but now I want to unroot it. I used Odin 3v185 and this is what I get:
Screenshot: i.imgur.com/XRBVjH6.jpg
The white box on the bottom left says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
START [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I've tried it multiple time with the I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 and I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 firmware. I am using the original Samsung USB cord. I've also tried it only 3 different USB ports on my computer. I am running XP. Can anyone help me?
Click to expand...
Click to collapse
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.
srikanthkata said:
Mine is same issue, except my phone says: Unsupport dev_type, I am using samsung galaxy s3 I9300 with binary count 2.
Please help me to resolve this and unroot my device.
Click to expand...
Click to collapse
Not trying to be rude but please go post this question under the GS3 forum. The GS3 forum can be found here http://forum.xda-developers.com/galaxy-s3
I have been searching threads for 6 hours, but haven't found anything conclusive.
I rooted my phone a while back, but today I decided to install a new custom ROM. I backed up the ROM to my external SD and installed the new one through safestrap. However, when I tried to reboot, I just got stuck on a screen that says samsung and has an open lock.
I am able to get into download mode, but not into recovery. After I boot into download mode, it says write protection:enabled (not sure that is normal, but I thought I would mention it). I open up Odin and the drivers seem to load fine. I have tried a a few versions of ODIN and two different Stock ROMs, but it fails every time. On my phone, after it fails, I get a message that says SW Rev. Check Fail: fused 2, binary: 1.
In ODIN, I get the following:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me? I'm getting kind of desperate.
Have you tried another USB cable?.
I have actually. The original cable and just another one I had. Also, tried it on 3 computers.
Should I be loading a PIT file? some places say to do it and others say not to.
marcymtz92 said:
Should I be loading a PIT file? some places say to do it and others say not to.
Click to expand...
Click to collapse
The problem is you're trying to flash mdl firmware and you're not on that version. It looks like you're on mf3. There is no Odin flashable mf3 firmware so I'd suggest you flash the nb1 tar file. See the general forum for the file. http://forum.xda-developers.com/showthread.php?p=50912149
Sent from my Nexus 5 using XDA Free mobile app
You are freaking amazing. That file totally worked. Thanks so much.
marcymtz92 said:
You are freaking amazing. That file totally worked. Thanks so much.
Click to expand...
Click to collapse
Glad you got it working
Sent from my Nexus 5 using XDA Free mobile app
Hellos,
I'm noob and recently rooted and installed a custom recovery my S4 in attempt to install Cyanogenmod. This was after the last update by At&t and the bootloader doesnt let the recovery (TWRP) boot. This was before I heard that Att added a boot loader. I have tried many methods to return to stock but all have failed because of the bootloader. Any way to remove and return to stock or perhaps unlock the bootloader?
I tried Odin with the correct firmware I needed. This is what I got.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MUMUFNE3_I337MPCTFNF1_I337MUMUFNE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can Anyone help?
If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
If you have an AT&T i337 then Odin the nb1 tar file. See this http://forum.xda-developers.com/showthread.php?p=56453100
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.
systemglytch said:
Sorry for being a noob but which one should I follow if I want to revert to factory? I have NL1.
Click to expand...
Click to collapse
You need to flash the nb1 tar. Either is ok. Then ota back to nl1
Sent from my Nexus 9 using XDA Free mobile app
When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
n007w said:
When I go to ODIN mode my PRODUCT NAME IS I337. However when i go to the about section in settings it says I9505. The phone is from China and I have rooted it I want to install a rom on this (5.0 prefferably maybe stock). Please help out also when I try to OTA update it says AT&T and no new update while its on 4.3.
Please help
Click to expand...
Click to collapse
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
DeadlySin9 said:
Whatever it says in download mode is probably true. Go to the system and install terminal emulator and type getprop ro.bootloader and reply with what it says (at least the last 3 characters)
Click to expand...
Click to collapse
bro I cant turn the phone on anymore when i turn it on it goes to SAMSUNG GALAXY S4 logo then turns off. I can get to download and stock recovery though. I done a /wipe data factory reset and /wipe cache partition. Could you please help me out maybe I can odin flash or..
BehrendsTech said:
If its running a custom or none stock ROM the about section will show wrong. I would remove the battery see what it says and Odin that firmware from sammobile. Sounds like you have a i337 running international variant of the rom. If it does say i337 don't do anything above MDL.
Click to expand...
Click to collapse
I cant turn it on now read my reply to another user please
n007w said:
I cant turn it on now read my reply to another user please
Click to expand...
Click to collapse
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
The boot loop is a soft brick most of the time you'll need to Odin it to get it to boot. I'd try MDL if it boot loops still that means your on a newer version you'll need to flash the newer tar file.
DeadlySin9 said:
I'd say just find and flash the NB1 ODIN tar file from the general section then. Either find the thread for it or check the [INDEX] thread.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
n007w said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
After Uninstalling Kies
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks will I need a PIT
n007w said:
Thanks will I need a PIT
Click to expand...
Click to collapse
No. Just flash the .tar.md5 file in the AP slot.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the nb1 tar as suggested, http://forum.xda-developers.com/showthread.php?p=50912149
You're flashing mk2
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
n007w said:
I was on Jellybean before will it be ok to flash nb1. Also I am waiting for the download
Click to expand...
Click to collapse
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Yes, it'll update the bootloader too but you can still root nb1 and you'll still need to use safestrap as your custom recovery so no harm will be done.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
n007w said:
Thanks man you are the best you know even Samsung couldnt fix it. I cant thank you enough but one more favour, how can I get it to 5.0 lollipop theres no OTA update.
Click to expand...
Click to collapse
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Give it some time and it should ota. The otas roll out in cycles so it might even be a day or two.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
n007w said:
I am in the UK so I wont recieve an AT&T OTA so is there an Odin Flash for it
Click to expand...
Click to collapse
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, there is not at this point.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
n007w said:
Sincerely apologize for annoying you but can you give me a prediction of when it will be released.
Click to expand...
Click to collapse
I have no idea if our when it might be available. To can eye on this thread if it becomes available it'll be posted here, http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Bro, please help I managed to get the software etc. Now it turns off randomly sometimes