What is the best recovery (or has less bugs) that can be used to install roms in huawei u8800 pro?
regards
http://forum.xda-developers.com/showthread.php?t=2216751
Problem with SD card
Moribus said:
http://forum.xda-developers.com/showthread.php?t=2216751
Click to expand...
Click to collapse
Are you sure?
because I tried it and did not recognize my SD card.
regards
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
cuvetto said:
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
Click to expand...
Click to collapse
It´s compatible with Android 4.4.2 ROM for u8800pro?
Regards
cuvetto said:
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
Click to expand...
Click to collapse
edilaq said:
It´s compatible with Android 4.4.2 ROM for u8800pro?
Regards
Click to expand...
Click to collapse
is written above.....also for KK (= 4.4.2)
edilaq said:
Are you sure?
because I tried it and did not recognize my SD card.
regards
Click to expand...
Click to collapse
Well, im sure. Ive tryed all clockwork mod recovery versions, with them, i couldnt install some custom roms, but with this one, i found no problems.
Still using it, and will use it in the future.
And i dont have SD card for this phone, so i use internal one.
I just installed the 18 Feb version of CM11 using cuvetto's recovery and it worked perfectly fine while TWRP failed to recognize my SD.
Related
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. It boots but reboot after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
THIS IS NOT WORKING ROM, ITS REBOOTING FEW SEC. AFTER BOOT!
Was3k said:
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. I've tryied to port this rom before but I have problem with rebooting after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
PS: sorry for my english
Click to expand...
Click to collapse
sounds interesting, but does it boot? or did i missed it
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Was3k said:
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Click to expand...
Click to collapse
oh ok, i will see after i installed MIUIV4
Is every thing working on this rom ?
Sent from my still alive, ICS capable HTC Wildfire.
no, its still rebooting after few sec.
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
rayven18 said:
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
Click to expand...
Click to collapse
ill try when i'm on boot manager D:
if sdcard isn't mounted i know what to do lol
Ok then
did the one who tried it use ext4 or ext2 partition, i can see it is available for ext4 too,
this does sometime's doesn't matter, just want to know
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
nasty007 said:
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
Click to expand...
Click to collapse
i wasn't able to run it trough boot manager, not even with ext2/ext4
so i guess we need to edit kernel to underclock it, tough my images always fails
cheers, will try this soon
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
i dont know witch kernel it uses.
i have flashed another kernel after installation but it always restarts
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
Default kernel from WFs CM7.2
So does anyone know how to fix the booting problem
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
im totally new to this, but im trying, dont know if someone else is working on this
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
with logcat its hard, but i guess its probably some framework related java files
LastStandingDroid said:
with logcat its hard, but i guess its probably some framework related java files
Click to expand...
Click to collapse
So do I, but it is complicated to fix that without device
I could properley help you if you tell what to do
hai all
I wanna ask about miui rom from here http://www.miui.com/download-14.html .author gt-bluesky ,does it work like other rom with 3 option ?(nand,nand+dataonEXT,and Native SD) or does it only work with t-mobile version ?im sorry because i was so confuse for look their forum LOL
Thank in Advance
It works on NAND or NAND+data on ext.
Sent from my HD2 MIUI V5
works perfectly mate??? how about paertion u made?
kkq29 said:
works perfectly mate??? how about paertion u made?
Click to expand...
Click to collapse
You can check yourself. Unzip rom file and look system folder's size, it is system partition size, i suggest to add 5 or 10 mb too for bad sector. Sorry for my English.
By the way, it doesn't work for me (v3.5.17), always restarting. I could'nt access desktop.
DoubleT34 said:
You can check yourself. Unzip rom file and look system folder's size, it is system partition size, i suggest to add 5 or 10 mb too for bad sector. Sorry for my English.
By the way, it doesn't work for me (v3.5.17), always restarting. I could'nt access desktop.
Click to expand...
Click to collapse
oh nice whats the partion u made? why it cant work mate
kkq29 said:
works perfectly mate??? how about paertion u made?
Click to expand...
Click to collapse
My sys-partition is 230. But I deleted some unnecessary things (live wallpapers, boot animation, calculator....).
Until now every version from "gtbluesky" works flawlessly for me.
Sent from my HD2 MIUI V5
mirage-19 said:
My sys-partition is 230. But I deleted some unnecessary things (live wallpapers, boot animation, calculator....).
Until now every version from "gtbluesky" works flawlessly for me.
Sent from my HD2 MIUI V5
Click to expand...
Click to collapse
nice ,u use t mobile version or eu version mate?
kkq29 said:
nice ,u use t mobile version or eu version mate?
Click to expand...
Click to collapse
I have the T-Mobile version, so everything is on NAND.
Rest of my config: magldr1.13 & 4ext recovery
Sent from my HD2 MIUI V5
does it only perfectly work on T-mobile Version?have anyone tried on eu version?
kkq29 said:
does it only perfectly work on T-mobile Version?have anyone tried on eu version?
Click to expand...
Click to collapse
I tried. I used 280 system partition. If you have class 10 sd card you can use your sd card's ext partition as internal memory with this script: initrd_patcher_v2.zip. Everything is fine. v3.5.17 didn't worked because i think it's a bug. Because every older and newer version worked for me but 3.5.17 didn't worked. Sorry for my english.
Crazy Poster
can u help me, i cant install any rom except the ultimatum .
i nt sure why.. not even cm7 roms...
Magpir said:
can u help me, i cant install any rom except the ultimatum .
i nt sure why.. not even cm7 roms...
Click to expand...
Click to collapse
You may have to flash another kernel?
brijeshep said:
You may have to flash another kernel?
Click to expand...
Click to collapse
What kernel to.flash I tried flashing a stock based custom Rom still bootloop
Sent from my HTC One using Tapatalk
Magpir said:
What kernel to.flash I tried flashing a stock based custom Rom still bootloop
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Flash rom base XXKPH and reflash rom after clean installation.
mickael.webmaster said:
Flash rom base XXKPH and reflash rom after clean installation.
Click to expand...
Click to collapse
where to get this rom? and why /
can u explain? flash through odin or recovery ?
Magpir said:
where to get this rom? and why /
can u explain? flash through odin or recovery ?
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PREPARATION FOR PROPERLY INSTALLATION
pass: WorkStation
Flash rom base S5830XXKPH With tass-Odin 4.3..
Pack tass-Odin, Driver and Recovery Flash Odin: Here
--------------------------------------------------
For people who are not equipped with Samsung Kies on the PC ..
- Install the drivers for your device Samsung Galaxy Ace S5830
Connect to your PC using a USB cable ..
- Placed on your Sd Card "recovery-clockwork-5.0.2.6-galaxyace-fix"
- Update zip from Sd Card
- Install Recovery Galaxy Ace
Thank you XDA Developer (checksum: md5: ba3d09df567757081da5dd6e8fb2d0b0)
mickael.webmaster said:
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PREPARATION FOR PROPERLY INSTALLATION
pass: WorkStation
Flash rom base S5830XXKPH With tass-Odin 4.3..
Pack tass-Odin, Driver and Recovery Flash Odin: Here
--------------------------------------------------
For people who are not equipped with Samsung Kies on the PC ..
- Install the drivers for your device Samsung Galaxy Ace S5830
Connect to your PC using a USB cable ..
- Placed on your Sd Card "recovery-clockwork-5.0.2.6-galaxyace-fix"
- Update zip from Sd Card
- Install Recovery Galaxy Ace
Thank you XDA Developer (checksum: md5: ba3d09df567757081da5dd6e8fb2d0b0)
Click to expand...
Click to collapse
sure this will work? i dont want to come with a bootloop again...
Magpir said:
sure this will work? i dont want to come with a bootloop again...
Click to expand...
Click to collapse
If you follow the first step this Rom runs very well. (Wipe data factory)
I put you on resettlement own because you have known the problem on all Cm7. In fact, if you had installed a CM10 then this is normal, this change priorities about the origin. The clean reinstall and it's over.
mickael.webmaster said:
If you follow the first step this Rom runs very well. (Wipe data factory)
I put you on resettlement own because you have known the problem on all Cm7. In fact, if you had installed a CM10 then this is normal, this change priorities about the origin. The clean reinstall and it's over.
Click to expand...
Click to collapse
What first step, which one u referring to . The Odin procedure or yr op
Magpir said:
What first step, which one u referring to . The Odin procedure or yr op
Click to expand...
Click to collapse
First step
- Wipe Data/Factory Reset
- Install Zip From Sd Card
- Choose Zip From Sd Card
- Restart..
You said it doesn't work for you then flash by Odin XXKPH. If you don't do that I suggest you find another topic.
How to use xthemer.. can you explain?
Sent from my GT-S5830 using Tapatalk 2
immy28 said:
How to use xthemer.. can you explain?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Flah it in CWM after installation of this rom. You can choose to change when you like.
But which file? Your link is not zip. All other file in your link. I think.
Give me zip file link.
Sent from my GT-S5830 using Tapatalk 2
immy28 said:
But which file? Your link is not zip. All other file in your link. I think.
Give me zip file link.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Google shows contained for safety, top left: File / download (Fichier / télécharger).
View attachment 2495670
I can not find. Can u give mediafire link or others?
Sent from my GT-S5830 using Tapatalk 2
immy28 said:
I can not find. Can u give mediafire link or others?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Add thread thx.
Magpir said:
can u help me, i cant install any rom except the ultimatum .
i nt sure why.. not even cm7 roms...
Click to expand...
Click to collapse
Who want to tell me what he thinks of this success?
If I put ThemeChooser and ThemeManager in .zip before installing Rom would it be possibly to put and use other themes?
denis022 said:
If I put ThemeChooser and ThemeManager in .zip before installing Rom would it be possibly to put and use other themes?
Click to expand...
Click to collapse
It's possible to flash "Chooser & Manager" after installing the rom but know that if I deleted they take up much space, uses battery resources and starts the system memory, for this reason my theme is to direct and flashable on this rom at will. :silly:
Hi,
I have p700 device, and I'm looking for lightweight and stable ROM for it (prefered KK but not mandatory) . Any recommandations?
I prefer the ROM will be most open source as it possible.
Thanks.
Try CyanHacker!
It's fast and smooth and based off AOSP (LiquidSmooth)
Sent from my Galaxy Note 3 using Tapatalk
skyinfo said:
Try CyanHacker!
It's fast and smooth and based off AOSP (LiquidSmooth)
Sent from my Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks. Any other recommendations?
Bitim said:
Thanks. Any other recommendations?
Click to expand...
Click to collapse
LiquidSmooth, I use it, very good ROM
Will it work on a P700? Since some of you seem to be using it on a P705.
Paget96 said:
LiquidSmooth, I use it, very good ROM
Click to expand...
Click to collapse
Thanks, it's working great fast and stable.
But I have problem with the NFC. The NFC option in the Wireless settings is grayed out, do you have a solution for this?
Thanks.
Bitim said:
Thanks, it's working great fast and stable.
But I have problem with the NFC. The NFC option in the Wireless settings is grayed out, do you have a solution for this?
Thanks.
Click to expand...
Click to collapse
Then you have p705 device.
Without nfc. Did you use it before?
Paget96 said:
Then you have p705 device.
Without nfc. Did you use it before?
Click to expand...
Click to collapse
Nope, never tried it. But it's weird because the model is indeed p705 but the p705 ROM is rejected by the phone, and the p700 rom is accepted.
And another problem is that the auto-brightness is not working, Any clue why?
Thanks again
Bitim said:
Nope, never tried it. But it's weird because the model is indeed p705 but the p705 ROM is rejected by the phone, and the p700 rom is accepted.
And another problem is that the auto-brightness is not working, Any clue why?
Thanks again
Click to expand...
Click to collapse
Pull the batteRy out,and see device model. I think it is p705. Flash p705 recovery, and follow instructions on thread.
Auto brightness don't work because our device doesn't have light sensor.
Search on aplications and themes. There you can find about auto brightness with front camera.
Paget96 said:
Pull the batteRy out,and see device model. I think it is p705. Flash p705 recovery, and follow instructions on thread.
Auto brightness don't work because our device doesn't have light sensor.
Search on aplications and themes. There you can find about auto brightness with front camera.
Click to expand...
Click to collapse
Behind the battery the model is p705f, but as I said the p705 rom is rejected by the phone. And the p700 rom successfully installed. That's weird.
Thanks.
Bitim said:
Behind the battery the model is p705f, but as I said the p705 rom is rejected by the phone. And the p700 rom successfully installed. That's weird.
Thanks.
Click to expand...
Click to collapse
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Paget96 said:
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Click to expand...
Click to collapse
Why should I install the p705 rom if the p700 rom is working?
Thanks.
Bitim said:
Why should I install the p705 rom if the p700 rom is working?
Thanks.
Click to expand...
Click to collapse
Because nfc drain your battery alot. And device won't get in deep-sleep
You remove nfc with Calibans zip file nfc destroyer, but nfc is in kenel too, then better use p705.
You battery will be empty in 4or5 hours.
Paget96 said:
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Click to expand...
Click to collapse
Is there specific recovery installation for p705f? I saw general recovery for p700/p705.
Thanks.
Bitim said:
Is there specific recovery installation for p705f? I saw general recovery for p700/p705.
Thanks.
Click to expand...
Click to collapse
No
http://download.mokeedev.com/?device=a5&type=
Surprised to see this, thanks for letting us know!
FoxyDrew said:
Surprised to see this, thanks for letting us know!
Click to expand...
Click to collapse
yes even I cud not blv when I saw MK50...I tried it..same issues as CM12...as its based on CM source so its quite normal that CM issues will persist.
It dose not detect my SIM cards.
That I need GAPPS's package to prove this ROM? The used one for CM12?
mkiller88 said:
It dose not detect my SIM cards.
Click to expand...
Click to collapse
First card sim slot working good here.I have A5dug version
Unable to install a5_ul, I do all wipes and installing ROM gives me the following error:
detected filesystem ext4 for /dev/block/platform/msn_sdcc. 1/by-name/system
mount: failed to mount /dev/block/platform/msn_sdcc. 1/by-name system at /system: device or resource busy
cyrano_ARG said:
Unable to install a5_ul, I do all wipes and installing ROM gives me the following error:
detected filesystem ext4 for /dev/block/platform/msn_sdcc. 1/by-name/system
mount: failed to mount /dev/block/platform/msn_sdcc. 1/by-name system at /system: device or resource busy
Click to expand...
Click to collapse
I faced this same error, but just give it sometime it'll eventually complete the installation and successfully bootup.
Droid ram said:
I faced this same error, but just give it sometime it'll eventually complete the installation and successfully bootup.
Click to expand...
Click to collapse
Does the data connection of the SIM1 work for dual sim versions?
Thanks,
kanchanray said:
Does the data connection of the SIM1 work for dual sim versions?
Thanks,
Click to expand...
Click to collapse
Nope it doesn't. This ROM has all the bugs that CM12 nighties have.
Droid ram said:
I faced this same error, but just give it sometime it'll eventually complete the installation and successfully bootup.
Click to expand...
Click to collapse
Thank you for his response, I install without problem
anybody flash this rom on dwg varient??
hows rom works??
Ghost1510 said:
anybody flash this rom on dwg varient??
hows rom works??
Click to expand...
Click to collapse
Should work exactly the same as CM12.
Ghost1510 said:
anybody flash this rom on dwg varient??
hows rom works??
Click to expand...
Click to collapse
Yes..it will work fkawlessly on a5dwg as Foxydrew said....it will take more time to flash.so plz be patient while flashing
Installed on a5 dwg dual sim working awesome without any major bugs! However it stuck on bootanimation at first i have to force into recovery and did factory reset and then reboot. Then it booted successfully.
Sent from my Desire 816 dual sim using XDA Free mobile app
rehan512 said:
Installed on a5 dwg dual sim working awesome without any major bugs! However it stuck on bootanimation at first i have to force into recovery and did factory reset and then reboot. Then it booted successfully.
Sent from my Desire 816 dual sim using XDA Free mobile app
Click to expand...
Click to collapse
Does that include mobile data too? Coz I've tried almost all the builds, the mobile data bug was present in every single one of them.
Droid ram said:
Does that include mobile data too? Coz I've tried almost all the builds, the mobile data bug was present in every single one of them.
Click to expand...
Click to collapse
Everything works here on my phone.Are you done clean install?