Hi,
I have p700 device, and I'm looking for lightweight and stable ROM for it (prefered KK but not mandatory) . Any recommandations?
I prefer the ROM will be most open source as it possible.
Thanks.
Try CyanHacker!
It's fast and smooth and based off AOSP (LiquidSmooth)
Sent from my Galaxy Note 3 using Tapatalk
skyinfo said:
Try CyanHacker!
It's fast and smooth and based off AOSP (LiquidSmooth)
Sent from my Galaxy Note 3 using Tapatalk
Click to expand...
Click to collapse
Thanks. Any other recommendations?
Bitim said:
Thanks. Any other recommendations?
Click to expand...
Click to collapse
LiquidSmooth, I use it, very good ROM
Will it work on a P700? Since some of you seem to be using it on a P705.
Paget96 said:
LiquidSmooth, I use it, very good ROM
Click to expand...
Click to collapse
Thanks, it's working great fast and stable.
But I have problem with the NFC. The NFC option in the Wireless settings is grayed out, do you have a solution for this?
Thanks.
Bitim said:
Thanks, it's working great fast and stable.
But I have problem with the NFC. The NFC option in the Wireless settings is grayed out, do you have a solution for this?
Thanks.
Click to expand...
Click to collapse
Then you have p705 device.
Without nfc. Did you use it before?
Paget96 said:
Then you have p705 device.
Without nfc. Did you use it before?
Click to expand...
Click to collapse
Nope, never tried it. But it's weird because the model is indeed p705 but the p705 ROM is rejected by the phone, and the p700 rom is accepted.
And another problem is that the auto-brightness is not working, Any clue why?
Thanks again
Bitim said:
Nope, never tried it. But it's weird because the model is indeed p705 but the p705 ROM is rejected by the phone, and the p700 rom is accepted.
And another problem is that the auto-brightness is not working, Any clue why?
Thanks again
Click to expand...
Click to collapse
Pull the batteRy out,and see device model. I think it is p705. Flash p705 recovery, and follow instructions on thread.
Auto brightness don't work because our device doesn't have light sensor.
Search on aplications and themes. There you can find about auto brightness with front camera.
Paget96 said:
Pull the batteRy out,and see device model. I think it is p705. Flash p705 recovery, and follow instructions on thread.
Auto brightness don't work because our device doesn't have light sensor.
Search on aplications and themes. There you can find about auto brightness with front camera.
Click to expand...
Click to collapse
Behind the battery the model is p705f, but as I said the p705 rom is rejected by the phone. And the p700 rom successfully installed. That's weird.
Thanks.
Bitim said:
Behind the battery the model is p705f, but as I said the p705 rom is rejected by the phone. And the p700 rom successfully installed. That's weird.
Thanks.
Click to expand...
Click to collapse
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Paget96 said:
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Click to expand...
Click to collapse
Why should I install the p705 rom if the p700 rom is working?
Thanks.
Bitim said:
Why should I install the p705 rom if the p700 rom is working?
Thanks.
Click to expand...
Click to collapse
Because nfc drain your battery alot. And device won't get in deep-sleep
You remove nfc with Calibans zip file nfc destroyer, but nfc is in kenel too, then better use p705.
You battery will be empty in 4or5 hours.
Paget96 said:
Install recovery for p705 and fprmat system.. First mount system,then format.. If this doesnt help, go into zip and find updater-script,and delete first two lines with phone model
Click to expand...
Click to collapse
Is there specific recovery installation for p705f? I saw general recovery for p700/p705.
Thanks.
Bitim said:
Is there specific recovery installation for p705f? I saw general recovery for p700/p705.
Thanks.
Click to expand...
Click to collapse
No
Related
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. It boots but reboot after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
THIS IS NOT WORKING ROM, ITS REBOOTING FEW SEC. AFTER BOOT!
Was3k said:
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. I've tryied to port this rom before but I have problem with rebooting after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
PS: sorry for my english
Click to expand...
Click to collapse
sounds interesting, but does it boot? or did i missed it
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Was3k said:
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Click to expand...
Click to collapse
oh ok, i will see after i installed MIUIV4
Is every thing working on this rom ?
Sent from my still alive, ICS capable HTC Wildfire.
no, its still rebooting after few sec.
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
rayven18 said:
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
Click to expand...
Click to collapse
ill try when i'm on boot manager D:
if sdcard isn't mounted i know what to do lol
Ok then
did the one who tried it use ext4 or ext2 partition, i can see it is available for ext4 too,
this does sometime's doesn't matter, just want to know
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
nasty007 said:
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
Click to expand...
Click to collapse
i wasn't able to run it trough boot manager, not even with ext2/ext4
so i guess we need to edit kernel to underclock it, tough my images always fails
cheers, will try this soon
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
i dont know witch kernel it uses.
i have flashed another kernel after installation but it always restarts
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
Default kernel from WFs CM7.2
So does anyone know how to fix the booting problem
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
im totally new to this, but im trying, dont know if someone else is working on this
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
with logcat its hard, but i guess its probably some framework related java files
LastStandingDroid said:
with logcat its hard, but i guess its probably some framework related java files
Click to expand...
Click to collapse
So do I, but it is complicated to fix that without device
I could properley help you if you tell what to do
Title says it all, when i install CM10 on my LG Optimus L7 i get no signal? It doesnt even ask me to enter my simcode...
In the status menu on my phone the mobile network says : UNKNOWN, i read something about Modem.bin, can someone explane this to me please because i realy like the CM10 rom but i flashed back to V20a now so i can use my phone with signal!.
matthijscod said:
Title says it all, when i install CM10 on my LG Optimus L7 i get no signal? It doesnt even ask me to enter my simcode...
In the status menu on my phone the mobile network says : UNKNOWN, i read something about Modem.bin, can someone explane this to me please because i realy like the CM10 rom but i flashed back to V20a now so i can use my phone with signal!.
Click to expand...
Click to collapse
how did you fix it?i am facing the same problem and a reboot is not helping
disablealex said:
how did you fix it?i am facing the same problem and a reboot is not helping
Click to expand...
Click to collapse
U have to install cm10 from v10k and then u will get signal! So flash back to v10k and then install cm10 and it should work
Sent from my LG-P700 running on CM10.
matthijscod said:
U have to install cm10 from v10k and then u will get signal! So flash back to v10k and then install cm10 and it should work
Sent from my LG-P700 running on CM10.
Click to expand...
Click to collapse
Hi can you please teach me how to intall cm10 with sim signal.
i had this problem for 4 days.
Need help badly.
Hi I have the problem that my nexus turn off after taking picture with flash. Without flash work fine.
Can someone tell me how to fix this?
der_sascha said:
Hi I have the problem that my nexus turn off after taking picture with flash. Without flash work fine.
Can someone tell me how to fix this?
Click to expand...
Click to collapse
More info would definitely be helpful...
ROM? Android Version? Modded camera?
I am on newest Mahdi build (the build before the are now same problem) KitKat 4.4.2
I am using the stock camera which came with ROM. I am on hells 44t3
der_sascha said:
I am on newest Mahdi build (the build before the are now same problem) KitKat 4.4.2
I am using the stock camera which came with ROM. I am on hells 44t3
Click to expand...
Click to collapse
Make a nandroid flash back to stock and see if it happens
If it doesn't you know the phone is fine
I dont want to flash the whole system new
When device is plugged in for loading the battery the function with flash works fine.
der_sascha said:
I dont want to flash the whole system new
When device is plugged in for loading the battery the function with flash works fine.
Click to expand...
Click to collapse
Well if you're not willing to trouble shoot. How do you expect to fix it?
Yeah i know what you mean I hoped it could be fixed without flash all new
1. Make Nandroid and Back up with Titanium or whatever you use
2. Flash a stock or different custom kernel...but I'd try stock 1st
3. Flash back to stock to rule out hardware.
4. Try a different Camera App
5. Try a different ROM
raise your voltage level.
under voltage too much.
Can you tell where I can finde it in trickster mode?
der_sascha said:
Can you tell where I can finde it in trickster mode?
Click to expand...
Click to collapse
Here you go : https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=fr
thank you but i already have trickstermode but i dont now which settings i have to set i am using hellscore 44t3
What is the best recovery (or has less bugs) that can be used to install roms in huawei u8800 pro?
regards
http://forum.xda-developers.com/showthread.php?t=2216751
Problem with SD card
Moribus said:
http://forum.xda-developers.com/showthread.php?t=2216751
Click to expand...
Click to collapse
Are you sure?
because I tried it and did not recognize my SD card.
regards
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
cuvetto said:
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
Click to expand...
Click to collapse
It´s compatible with Android 4.4.2 ROM for u8800pro?
Regards
cuvetto said:
Have you ever tried that modified by me?? It 'based on ANSFER 6.0.1.0, but with some modifications....i use it by long time, and never had a problem,also for kk....
This is the link: http://www.mediafire.com/download.php?b29atcyh71c9l7a
Click to expand...
Click to collapse
edilaq said:
It´s compatible with Android 4.4.2 ROM for u8800pro?
Regards
Click to expand...
Click to collapse
is written above.....also for KK (= 4.4.2)
edilaq said:
Are you sure?
because I tried it and did not recognize my SD card.
regards
Click to expand...
Click to collapse
Well, im sure. Ive tryed all clockwork mod recovery versions, with them, i couldnt install some custom roms, but with this one, i found no problems.
Still using it, and will use it in the future.
And i dont have SD card for this phone, so i use internal one.
I just installed the 18 Feb version of CM11 using cuvetto's recovery and it worked perfectly fine while TWRP failed to recognize my SD.
Hello Guys
I've tried several times to SDMerge my LG L3 e400 but never make it. I had to reflash kdz file after trying it. It would be much appreciated if anyone here could give me a detailed tutorial how to SDMerge my LG L3 e400.
Thx.
george brown said:
Hello Guys
I've tried several times to SDMerge my LG L3 e400 but never make it. I had to reflash kdz file after trying it. It would be much appreciated if anyone here could give me a detailed tutorial how to SDMerge my LG L3 e400.
Thx.
Click to expand...
Click to collapse
1.if you are in stock (2.3.6) .... root it and install rom manager app from play store
2.install the cwm 5.8.4.5 recovery for l3 from rom manager
3.download "SDMergE400_step4v1.3b" and "SDMergE400_mod_gellmar_crazybyte.zip without old step4" files from this link "http://forum.xda-developers.com/showthread.php?t=2215406"
4.Extract files from "SDMergE400_mod_gellmar_crazybyte.zip without old step4"(you will get "SDMergE400_step1.zip" and "SDMergE400_step2.zip") and put these files in sdcard and put "SDMergE400_step4v1.3b.zip" directly(dont extract files)
5.go to recovery by turning off phone and press volume down +home + power
6.format system and data and cache partitions
7.then install SDMergE400_step1.zip and phone will reboot after That install SDMergE400_step2.zip
8.then install any cm9 rom (Stock rom will not work.... except Gellmars modified stock rom )
9. after that install cm9 rom..... dont reboot to system immediately ....install SDMergE400_step4v1.3b.zip now reboot to system
10...enjoy SDMerg cm9...
i cant go more explanatory Than dis ......
Thanks 13THWARRIOR, I'm trying now
Sent from my LG P705 using XDA Software
Or any other suggestion on how to SDMerge cause I heard it needs compatible Rom for it.
I mean what kind of base band.
Sent from my LG P705 using XDA Software
george brown said:
Or any other suggestion on how to SDMerge cause I heard it needs compatible Rom for it.
I mean what kind of base band.
Sent from my LG P705 using XDA Software
Click to expand...
Click to collapse
well no .....it needs only cm9 ....base band is not an issue
13THWARRI0R said:
well no .....it needs only cm9 ....base band is not an issue
Click to expand...
Click to collapse
Thanks any way mate. Even though the link you give doesn't exist any more and I still can't sdmerged my e400 till now.
Sent from my LG P705 using XDA Software