I have i9505 XXUFNB8 4.4.2 Stock Firmware installed but the "CF-Auto-Root-jflte-jfltexx-gti9505" does not work on it.
The root process seems OK with NO error or fail. but after root the SuperSU icon wont displayed. I've installed SuperSU via google Play but when I open it it says "There is no SU binary installed, and SuperSU cannot install it."
How to root XXUFNB8 on i9505?
martikp said:
I have i9505 XXUFNB8 4.4.2 Stock Firmware installed but the "CF-Auto-Root-jflte-jfltexx-gti9505" does not work on it.
The root process seems OK with NO error or fail. but after root the SuperSU icon wont displayed. I've installed SuperSU via google Play but when I open it it says "There is no SU binary installed, and SuperSU cannot install it."
How to root XXUFNB8 on i9505?
Click to expand...
Click to collapse
I had similar problem and what i did is:
1. Make a data backup of ur Internal Memory
2. Factory Reset ur phone (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything)
3. Root it again through "CF-Auto-Root-jflte-jfltexx-gti9505"
4. Install Root Explorer for example (or other explorer for root devices) and delete this apps (coz KNOX app is blocking SuperSu):
KNOX in System/App folder:
ContainerAgent.apk
KNOXAgent.apk
ContainerEventsRelayManager.apk
KLMSAgent.apk
KnoxAttestationAgent.apk
KNOXStore.apk
KNOXStub.apk
SPDClient.apk
5. Recover your data of the step 1 to ur phone and install the apps you had before
6. Enjoy ur rooted device
Joku1981 said:
I had similar problem and what i did is:
1. Make a data backup of ur Internal Memory
2. Factory Reset ur phone (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything)
3. Root it again through "CF-Auto-Root-jflte-jfltexx-gti9505"
4. Install Root Explorer for example (or other explorer for root devices) and delete this apps (coz KNOX app is blocking SuperSu):
KNOX in System/App folder:
ContainerAgent.apk
KNOXAgent.apk
ContainerEventsRelayManager.apk
KLMSAgent.apk
KnoxAttestationAgent.apk
KNOXStore.apk
KNOXStub.apk
SPDClient.apk
5. Recover your data of the step 1 to ur phone and install the apps you had before
6. Enjoy ur rooted device
Click to expand...
Click to collapse
Thanks, I follow your instruction, But how do I delete these file without root permission.
see following screenshots:
martikp said:
Thanks, I follow your instruction, But how do I delete these file without root permission.
see following screenshots:
Click to expand...
Click to collapse
1. Take a look THIS
2. Root it again
3. I hope it will works
This have happened to me also. the solution I found was to install CF Root flashable zip through CWM recovery. The SuperSU app did not appear in the app drawer, but I just downloaded it from Play Store and the device was properly rooted then.
this is the link that I downloaded the .zip root file:
http://download.chainfire.eu/382/SuperSU/UPDATE-SuperSU-v1.93.zip
Problem Solved!
I was using an old version of CF-Auto-Root, so I download the updated version of CF-Auto-Root and root my i9505 running XXUFNB8 4.4.2 successfully. For those who have the same problem of mine download following file and follow the rooting tutorial. :good:
Download Updated CF-Auto-Root:
http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
martikp said:
I have i9505 XXUFNB8 4.4.2 Stock Firmware installed but the "CF-Auto-Root-jflte-jfltexx-gti9505" does not work on it.
The root process seems OK with NO error or fail. but after root the SuperSU icon wont displayed. I've installed SuperSU via google Play but when I open it it says "There is no SU binary installed, and SuperSU cannot install it."
How to root XXUFNB8 on i9505?
Click to expand...
Click to collapse
since you have the same device as me and since you have upgraded to kitkat as well, may I ask if there is a way to root the s4 XXUFNB8 without tripping knox?
If I'm right, the CF-AUTOROOT will trip the knox warranty void from 0x0 to 0x1.. but I could be wrong so can someone tell me if there is a way to do this or if the CF-AUTOROOT doesn't trip the knox warranty?
Thank you
Jonny993 said:
since you have the same device as me and since you have upgraded to kitkat as well, may I ask if there is a way to root the s4 XXUFNB8 without tripping knox?
If I'm right, the CF-AUTOROOT will trip the knox warranty void from 0x0 to 0x1.. but I could be wrong so can someone tell me if there is a way to do this or if the CF-AUTOROOT doesn't trip the knox warranty?
Thank you
Click to expand...
Click to collapse
Umm, I have already tripped the knox when I was on MJ6 android 4.3 with CF Auto Root.
I read somewhere that SafeRoot method does not trip the knox, but I don't know if Saferoot works on android 4.4.2 or not.
martikp said:
Umm, I have already tripped the knox when I was on MJ6 android 4.3 with CF Auto Root.
I read somewhere that SafeRoot method does not trip the knox, but I don't know if Saferoot works on android 4.4.2 or not.
Click to expand...
Click to collapse
I've read that too.. but I'm not that confident to risk to trip knox for the root privileges...I'm waiting for good news
Jonny993 said:
I've read that too.. but I'm not that confident to risk to trip knox for the root privileges...I'm waiting for good news
Click to expand...
Click to collapse
You may also want to try Kingo.
http://www.kingoapp.com
martikp said:
You may also want to try Kingo.
http://www.kingoapp.com
Click to expand...
Click to collapse
thank you for the reply but..
on their site there is no support for the international version of the sg4 (I9505) and plus of that I read on xda that kingo requires internet connection and also that backups your IMEI and other kind of stuff on their servers so.. I don't trust this procedure XS
some other methods to try? )
Jonny993 said:
(..) some other methods to try? )
Click to expand...
Click to collapse
anyone?
Jonny993 said:
anyone?
Click to expand...
Click to collapse
No. Only CF-Auto-Root by Chainfire :highfive:
Joku1981 said:
No. Only CF-Auto-Root by Chainfire :highfive:
Click to expand...
Click to collapse
I will wait then.. don't wanna trip knox since I've been owning this device for 2 months
Jonny993 said:
I will wait then.. don't wanna trip knox since I've been owning this device for 2 months
Click to expand...
Click to collapse
Better. Anyway u can use Greenify app or disable apps for keep good battery life :fingers-crossed:
Joku1981 said:
Better. Anyway u can use Greenify app or disable apps for keep good battery life :fingers-crossed:
Click to expand...
Click to collapse
I don't want to go ot but.. does greenify work on unrooted devices? I used to use it on rooted devices..
Jonny993 said:
I don't want to go ot but.. does greenify work on unrooted devices? I used to use it on rooted devices..
Click to expand...
Click to collapse
They were posting the last update of Greenify didnt need root. I cant tell ya coz I have rooted my own. Try it pls and confirm me it :highfive:
BENC2 Root Issue
Got a stange root problem.
Have got stock firmware N9005XXUENC2_N9005OLBENC2_MM1. Installed using ODIN 3.09. Then applied CF-Auto-Root-hlte-hltexx-smn9005 Autoroot (Latest).
All applied fine except when a app now request root permissions SuperUser does not prompt for permissions.
Have checked root via number of apps. All showing ok. Super user launches fine but no app in register.
Even an app goes to request root permissions (eg File Explorer KitKat fix) it just hangs and does not user the prompt. Apps just hangs. All root requesting apps are the same. Hangs on initial access/prompt
Any fixes?
Related
hi,
I just got the N9005 version, came with MJ3. It autoupdated via OTA to MJ7.
I used CF-Root to root it so KNOX warranty is already void (0x1).
When I'm trying to install TitaniumBackup from Play Store it downloads it, tries to install and reboots the device. Installation is not complete so when I try to install again - same thing happens.
Is there any solution to that?
xtzz said:
hi,
I just got the N9005 version, came with MJ3. It autoupdated via OTA to MJ7.
I used CF-Root to root it so KNOX warranty is already void (0x1).
When I'm trying to install TitaniumBackup from Play Store it downloads it, tries to install and reboots the device. Installation is not complete so when I try to install again - same thing happens.
Is there any solution to that?
Click to expand...
Click to collapse
Have you checked that you are indeed rooted and SuperSU (or equivalent) is working and is updated?
You can also check (Settings/Security) if security level is set to Normal rather than High.
I was updating superSU on my note 3 after root. I tried to use game killer, only to get the message that root wasn't available. I loaded up superSU and was told that the binary couldn't be found... I downloaded a root checker and it said that root access was there... So I unrooted and re rooted. Same deal.
I'm not sure how to fix the issue.
Can anyone please help
(SM-N9005)
BallaratBloke81 said:
I was updating superSU on my note 3 after root. I tried to use game killer, only to get the message that root wasn't available. I loaded up superSU and was told that the binary couldn't be found... I downloaded a root checker and it said that root access was there... So I unrooted and re rooted. Same deal.
I'm not sure how to fix the issue.
Can anyone please help
(SM-N9005)
Click to expand...
Click to collapse
Somethings wrong with your su I think. Have to given privillages to game killer in su?
Sent from Galaxy Note 3 SM-N9005
thahim said:
Somethings wrong with your su I think. Have to given privillages to game killer in su?
Sent from Galaxy Note 3 SM-N9005
Click to expand...
Click to collapse
I have given it privileges. But when I open supersu says there is something wrong with su binary.
BallaratBloke81 said:
I have given it privileges. But when I open supersu says there is something wrong with su binary.
Click to expand...
Click to collapse
Have you deleted then given Super SU privileges back? I find installing a new rom can sometimes screw with them....
ultramag69 said:
Have you deleted then given Super SU privileges back? I find installing a new rom can sometimes screw with them....
Click to expand...
Click to collapse
When I first got the phone it had a rom full of provider bloatware. I flashed another stock Roma to get rid of it. Then I flashed xnote and decided OT wasn't for me, so I went back to stock (without bloats)
BallaratBloke81 said:
When I first got the phone it had a rom full of provider bloatware. I flashed another stock Roma to get rid of it. Then I flashed xnote and decided OT wasn't for me, so I went back to stock (without bloats)
Click to expand...
Click to collapse
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
ultramag69 said:
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
Click to expand...
Click to collapse
Yes hello, can someone please upload the note 3 4.3 touchwiz apk, i accidentally deleted mine, so please.
ultramag69 said:
Delete the apps from SU then when prompted give them permission again - like normal you will need to re-open them again and get the "Grant root access" prompt from SU...This may work, has for me everytime...
Only other thing I would do if this didn't work would be re-stock and start from scratch...
Click to expand...
Click to collapse
I have already reflashed stock back to my phone, re rooted and the problem still exsists
Currently I'm on stock again (downloaded from sammobile)
Every time I open superSU, it tells me there is a problem with the SU BINARY (when I was rooted. I'm not trying to use super SU unrooted lol)
Just rooted again and its still the same...
Reflash stock, full wipe from stock recovery, reroot.
Or u have done a full wipe from stock recovery after flash stock firmware?
Sent from N9005, somewhere on this earth.
antique_sonic said:
Reflash stock, full wipe from stock recovery, reroot.
Or u have done a full wipe from stock recovery after flash stock firmware?
Sent from N9005, somewhere on this earth.
Click to expand...
Click to collapse
Yeah, done all of that. Is there a way to manually wipe the SU binary and reinstall? The root checker app says root access is allowed
Is there another way to see if it's the SU binary or game killer having issues?
BallaratBloke81 said:
Yeah, done all of that. Is there a way to manually wipe the SU binary and reinstall? The root checker app says root access is allowed
Is there another way to see if it's the SU binary or game killer having issues?
Click to expand...
Click to collapse
If you attempts to fix root access denied on game killer then it won't work. Gamekiller/gamecih/gameguardian doesn't work with android 4.3 and above.
I however tried gamecih with cm based rom last week & it worked
Rosli59564 said:
If you attempts to fix root access denied on game killer then it won't work. Gamekiller/gamecih/gameguardian doesn't work with android 4.3 and above.
I however tried gamecih with cm based rom last week & it worked
Click to expand...
Click to collapse
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
BallaratBloke81 said:
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
Click to expand...
Click to collapse
Its not a superSU issue, guess the dev needs to update the gamekiller app. Do you have root privileges with other root apps?
gee2012 said:
Its not a superSU issue, guess the dev needs to update the gamekiller app. Do you have root privileges with other root apps?
Click to expand...
Click to collapse
Not as of yet. The photo of the warning I posted, comes up when I open SuperSU
BallaratBloke81 said:
Not as of yet. The photo of the warning I posted, comes up when I open SuperSU
Click to expand...
Click to collapse
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
gee2012 said:
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
Click to expand...
Click to collapse
I can't even get into the app to unroot
BallaratBloke81 said:
OK, so you're saying those kind of apps will no longer work?
What about the SU binary issue?
Click to expand...
Click to collapse
Your SU binary got issue but yes even you solve it those apps won't work.
Try uninstall it from playstore. There is also flashable supersu
http://download.chainfire.eu/204 but I never use it either or maybe reroot
gee2012 said:
Try unrooting superSU from the app itself and reflash the latest (1.94 i think) superSU.zip in recovery or with Flashify (if compatible ,Playstore) flash CF Root in downloadmode. Hope that helps.
Click to expand...
Click to collapse
ES explorer can't get root access either.
Should I flash superSU.zip straight over the top using recovery? Or is that not a good idea?
Rosli59564 said:
Your SU binary got issue but yes even you solve it those apps won't work.
Try uninstall it from playstore. There is also flashable supersu
http://download.chainfire.eu/204 but I never use it either or maybe reroot
Click to expand...
Click to collapse
I have unrooted (flashing stock rom using recovery) and rerooted (using CF auto root... Or whatever it's called) many times.
Who knew it would be that simple? Towelroot has rooted my Note 3, I'm finally back with Titaniuam Backup Pro and Knox is 0x0!
Amazing.
However I've installed CF's SuperSU and it fails to update the binaries.
I've frozen KNOX in Titanium and rebooted but they still won't update.
Do I even need to update them?
Also, if I try to install CWM will that trip KNOX?
jonboyuk said:
Who knew it would be that simple? Towelroot has rooted my Note 3, I'm finally back with Titaniuam Backup Pro and Knox is 0x0!
Amazing.
However I've installed CF's SuperSU and it fails to update the binaries.
I've frozen KNOX in Titanium and rebooted but they still won't update.
Do I even need to update them?
Also, if I try to install CWM will that trip KNOX?
Click to expand...
Click to collapse
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Fantastic. thank you Alex. That worked perfectly. As you're in the know I'll ask you another question (or two)!
Because I don't want to trip knox I won't install CWM. As such I can't make a nandroid backup. I want to install the xposed framework and Wanam modules...but it strongly recommends a backup. Is it risky for me to do this?
Any idea what happens when an OTA update is release by Samsung?
jonboyuk said:
Fantastic. thank you Alex. That worked perfectly. As you're in the know I'll ask you another question (or two)!
Because I don't want to trip knox I won't install CWM. As such I can't make a nandroid backup. I want to install the xposed framework and Wanam modules...but it strongly recommends a backup. Is it risky for me to do this?
Any idea what happens when an OTA update is release by Samsung?
Click to expand...
Click to collapse
I took the yolo approach and installed xposed and wanam with no problems. As you say don't want to risk loosing warranty but knox is still fine and now I have a customisable phone.
No idea about ota samsung update sorry.
pjtb said:
I took the yolo approach and installed xposed and wanam with no problems. As you say don't want to risk loosing warranty but knox is still fine and now I have a customisable phone.
No idea about ota samsung update sorry.
Click to expand...
Click to collapse
Hahaha, I too have just taken the YOLO approach (as much as I hate that phrase!). Thanks mate!
jonboyuk said:
Hahaha, I too have just taken the YOLO approach (as much as I hate that phrase!). Thanks mate!
Click to expand...
Click to collapse
Actually you can make nandroid backup without costume recovery. Just use Online Nandroid Backup. It makes nandroid backup in CWM or TWRP formats.
And then you can use Nandroid Manager to restore your backup. Although I still can't figure it out on how to restore a backup if you soft brick you phone.
alexpowermetal said:
Actually you can make nandroid backup without costume recovery. Just use Online Nandroid Backup. It makes nandroid backup in CWM or TWRP formats.
And then you can use Nandroid Manager to restore your backup. Although I still can't figure it out on how to restore a backup if you soft brick you phone.
Click to expand...
Click to collapse
Cheers, not heard of that before. I'll have to look into it!
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Not quite sure what to do here. I've ODINed twice and just tried this approach, but I cannot get the binaries to update successfully. I keep getting the failure. Any ideas?
danjng said:
Not quite sure what to do here. I've ODINed twice and just tried this approach, but I cannot get the binaries to update successfully. I keep getting the failure. Any ideas?
Click to expand...
Click to collapse
Now you can install SuperSU from play store as it was updated and now it should update binaries without a problem. Install SuperSU, open it, press "update binaries", use "normal" method (not CWM/TWRP), when it will ask you to disable knox, press "disabled knox" and then reboot.
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
Isn't the point of using towelroot to prevent tripping KNOX? When trying to update my SuperSU binaries it asks me to disable KNOX, won't this trip it?
toews said:
Isn't the point of using towelroot to prevent tripping KNOX? When trying to update my SuperSU binaries it asks me to disable KNOX, won't this trip it?
Click to expand...
Click to collapse
As far as I understand, it disables software part of knox, so it (knox) wont prevent you to update binaries. Anyway it won't trip knox.
Binary issue
fsolares said:
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
Click to expand...
Click to collapse
I have the same problem with binary issues on the towelroot method. It works at first but after a reboot it says "Update binary files" So i do that and then it says "Failed" I have the verizon Note 3 on 4.4.2. I found a temp fix for this when having issues with binary update. You don't have to re-root your phone.
1. Save the apk super su to your phone.
2. After having problems with binary then uninstall the supersu app from your phone
3. Install the supersu apk using "ES File Explorer" Then load the app it'll still say failed.
4. Reboot the phone and open up Supersu and you won't get the binary issue
I know its annoying work around but its what i have figured out and it works.
Guys, can you help with 2 questions please?
I have a I9505 with 4.4.2 branded rom (ZTO) with towel root (know still 0x0) and disable OTA updates, I can't find a perfect custom rom (always a feature not working, missing or the interface it's a mess/colorfull), now I just want the stock unbranded rom.
1 - What is the safest way to flash the stock rom without trip knox?
2- After that, can I enable back OTA updates with root?
Thanks!
fsolares said:
I'm having a similar issue that's pretty frustrating. I root my phone and install supersu, asks to disable knox and everything works great until about a day after, I try to open Supersu and it says I need to update binaries but it will not update. So I have to uninstall supersu, root again then install Supersu again! Right now it's working fine but I'm scared to open Supersu in fear that it will happen all over again. It's been a pain! I even tried flashing the supersu zip through Safestrap to see if it helps but it did the same thing. Is anyone having a similar issue or can anyone help with this?
Click to expand...
Click to collapse
Why are you re-rooting?
---------- Post added at 03:01 PM ---------- Previous post was at 02:57 PM ----------
jashton23 said:
I have the same problem with binary issues on the towelroot method. It works at first but after a reboot it says "Update binary files" So i do that and then it says "Failed" I have the verizon Note 3 on 4.4.2. I found a temp fix for this when having issues with binary update. You don't have to re-root your phone.
1. Save the apk super su to your phone.
2. After having problems with binary then uninstall the supersu app from your phone
3. Install the supersu apk using "ES File Explorer" Then load the app it'll still say failed.
4. Reboot the phone and open up Supersu and you won't get the binary issue
I know its annoying work around but its what i have figured out and it works.
Click to expand...
Click to collapse
Same phone and carrier. Thanks for this. :good:
alexpowermetal said:
Download http://download.chainfire.eu/448/SuperSU/UPDATE-SuperSU-v1.99r5.zip . Don't flash it. Unzip it. Then go to /common folder and install superuser.apk. Run SuperSU from App Drawer, and let binary to update. Now you have it working. And don't worry about disabling KNOX. Just disable it.
By flashing CWM you will trip knox.
Click to expand...
Click to collapse
I downloaded SuperSU from the link your provided, copied just the superuser.apk from /common folder to my Note 3 and then install.
Run SuperUser, which asked to disable KNOX (I clicked OK). KNOX disabled.
However, there is no prompt for the binary update. Am I doing anything wrong?
you could also flash the zip with mobile odin pro (available in play store)
*flies away*
Sent from my SM-N9005 using XDA Premium 4 mobile app
Killberty said:
you could also flash the zip with mobile odin pro (available in play store)
*flies away*
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Wouldn't this require TWRP? I don't have that, since installing TWRP will trip KNOX.
Mod Edit quote removed
and i just told u another method man...
i am not tired of it, i enjoy helping people, giving back support i once recieved myself when i was a noob
but if i post something, you should read it, and maybe you are even smart enough to type in "mobile odin pro" in that play store instead of just commenting - if you had done that, you'd have seen that no custom recovery is required for flashing
Sent from my SM-N9005 using XDA Premium 4 mobile app
Mod Edit
Thread cleaned
If you want to help users , great.
If you do not want to help users , that is also fine.
But there is no need to insult each other.
Please respect the XDA RULES
Thank you
malybru
Forum Moderator
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox version to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
RECKLESS PAIN said:
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox verizon to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and no hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
Click to expand...
Click to collapse
I'm pretty sure I've read somewhere that its just a problem with towelroot.. And that same thing happened to me on my note 3. I'm pretty sure what I did was download safestrap (you can I install it after) http://forum.xda-developers.com/showthread.php?t=2517610 and flash this (chainfires supersu +binary) http://forum.xda-developers.com/showthread.php?t=2517610
If that doesn't work just either pm me or comment that it didn't and I'll see if I can find another way! And you can always uninstall safestrap once you flashed the package (don't forget to clear cache and dalvic)
Sent from my GalaxyAwesome
recovery locked ----boooo!
RECKLESS PAIN said:
So I just got done rooting my Note 3 with towelroot and everything went fine. I checked to make sure it worked with "Root Checker" and it said I successfully had root access. So next step I took was to download a SuperUser app from the PlayStore, and no matter WHAT SuperUser app I use, NONE of them can update the SU Binary????? so I went and downloaded "Busybox Installer" and downloaded the latest Busybox verizon to my Note. Then went back to retry to update the Binary but still no progess!! I'm stuck and I really don't know what else to do! I'm not trying to install any ROM or Safestrap. Just want my phone rooted to mess around with some permissions and no hacked apks. So can someone please tell me what I'm doing wrong???? I've rebooted my Note COUNTLESS number of times and still SuperSU still says it fails to update the Binary! It successfully disable KNOX tho. So what can I do so that I can use my root to my full potential and update the SU Binary???
Click to expand...
Click to collapse
clarify your Super user app from google play is 1.99r4 ....you should check THIS thread for latest SuperSu app (2.00)
http://forum.xda-developers.com/showthread.php?t=1538053
keep in mind Vzw recovery is locked, you cannot flash files on stock rom.
SS will relieve big headaches....so install it.
check upload... you get one free today
:good:
Once rooted with towelroot, I uninstalled the towelroot app. After the next reboot, SuperSU was not complaining anymore for me.
Thanks for all the help! Got it up and running in no time!
RECKLESS PAIN said:
Thanks for all the help! Got it up and running in no time!
Click to expand...
Click to collapse
What fixed your issue?
drewcam888 said:
What fixed your issue?
Click to expand...
Click to collapse
I put Safe strap on and installed it, then updated the SU Binary through custom recovery via SafeStrap.
RECKLESS PAIN said:
I put Safe strap on and installed it, then updated the SU Binary through custom recovery via SafeStrap.
Click to expand...
Click to collapse
I did the above but after opening supersu it still asks to update bibary and then fails
drewcam888 said:
I did the above but after opening supersu it still asks to update bibary and then fails
Click to expand...
Click to collapse
Did you try flashing the files he put for the Superuser + binary in Safestrap? Also do you got the latest busy box installed????
RECKLESS PAIN said:
Did you try flashing the files he put for the Superuser + binary in Safestrap? Also do you got the latest busy box installed????
Click to expand...
Click to collapse
Yes to both. Tried flashing multiple times
Any further suggestions from anyone?
drewcam888 said:
Any further suggestions from anyone?
Click to expand...
Click to collapse
Download the flashable zip of supersu. Then instead of flashing, go to the Commons folder inside it and extract the apk. Install it and then run it from app drawer.
K03WL3R said:
Download the flashable zip of supersu. Then instead of flashing, go to the Commons folder inside it and extract the apk. Install it and then run it from app drawer.
Click to expand...
Click to collapse
This just prompts SU binary update and fails.
I managed to download safestrap and have the su zip in my downloads, but dont knwo where to go from here.
I also don't use anything but stock ROM, won't I trip KNOX by flashing my stock?
First time rooting so I probably shouldn't play around with things alone. Thanks
jinh0o said:
This just prompts SU binary update and fails.
I managed to download safestrap and have the su zip in my downloads, but dont knwo where to go from here.
I also don't use anything but stock ROM, won't I trip KNOX by flashing my stock?
First time rooting so I probably shouldn't play around with things alone. Thanks
Click to expand...
Click to collapse
No you won't trip knox flashing is safe in safestrap!
K03WL3R said:
No you won't trip knox flashing is safe in safestrap!
Click to expand...
Click to collapse
Still not downloading the binary. Now I can't even uninstall it through drawer, did the flash make it a system app?
I think I should've uninstalled it before the flash.
jinh0o said:
Still not downloading the binary. Now I can't even uninstall it through drawer, did the flash make it a system app?
I think I should've uninstalled it before the flash.
Click to expand...
Click to collapse
It might've, sorry but I'm not clear on what I did..(I think I just flashed a rom) Just go to system/app and see if it's there. Delete it and reflash.
---------- Post added at 08:58 PM ---------- Previous post was at 08:35 PM ----------
And here is the version of superSU from when towel root first came out. http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
Helpppppppp
I rooted my phone with ODIN - chainfire CF-Root
After 5 minutes my root is broken !
Now ! i can't update supersu ! installtion failed !
i can't uninstall supersu or full unroot to ROOT my device again !!!
* update it from recovery ,not worked !
** delet it from recovery and root browser ! NOT WORKED
*** re-install not worked too.
Build Number : XXUGBOJ1 - Android 5
can anyone help me !?
Note 3 N9005 3G & LTE
alishirazy said:
I rooted my phone with ODIN - chainfire CF-Root
After 5 minutes my root is broken !
Now ! i can't update supersu ! installtion failed !
i can't uninstall supersu or full unroot to ROOT my device again !!!
* update it from recovery ,not worked !
** delet it from recovery and root browser ! NOT WORKED
*** re-install not worked too.
Build Number : XXUGBOJ1 - Android 5
can anyone help me !?
Note 3 N9005 3G & LTE
Click to expand...
Click to collapse
The N9005 is not a Verizon phone, this forum is about the Verizon Note 3, SM-900V
Sent from my Note 3 via Tapatalk
Hi guys i found root for s4 i9506 android 5
Link :laugh:
http://zidroid.com/how-to-root-galaxy-s4-lte-a-i9506-on-android-5-lollipop/
Here`s what I did:
Flash TWRP or CWM via odin
You have 2 options
1. Apply root directly from recovery and install supersu from playstore.
2. Flash Supersu.zip 2.45 via recovery.
kornelius1982 said:
Here`s what I did:
Flash TWRP or CWM via odin
You have 2 options
1. Apply root directly from recovery and install supersu from playstore.
2. Flash Supersu.zip 2.45 via recovery.
Click to expand...
Click to collapse
First time flash android 5 rom via odin.exe
And next step flash this file via odin.exe
File link
http://download.chainfire.eu/502/CF-Root/CF-Auto-Root/CF-Auto-Root-ks01lte-ks01ltexx-gti9506.zip
:good:
Rooted successfully but knox is still activated, supersu doenst detectid or remove it, anyone know how to remove knox in this update, please?
bryanfeanor said:
Rooted successfully but knox is still activated, supersu doenst detectid or remove it, anyone know how to remove knox in this update, please?
Click to expand...
Click to collapse
Supersu doesn't know yet how to treat to lolipop knox, let's wait to master chainfire and hope.
bryanfeanor said:
Rooted successfully but knox is still activated, supersu doenst detectid or remove it, anyone know how to remove knox in this update, please?
Click to expand...
Click to collapse
just install link2sd and in link2sd search knox and all file have knox on her rename remove it:good:
im sorry for my bad english
seli1987 said:
just install link2sd and in link2sd search knox and all file have knox on her rename remove it:good:
im sorry for my bad english
Click to expand...
Click to collapse
thanks, but what i did was freeze all knox apps and com.sec.knox. with titanium backup no issues so far