Okay so I'm starting to get fed up with this phone and my head unit...
My head unit (there are no settings to change this) automatically defaults to the USB connection, when a USB device has been plugged in (in this case my cell phone to charge)
I use Bluetooth audio streaming so I have to constantly switch back to bluetooth mode which really isn't a big deal...there's just a couple problems
If I do NOT mount the cell phone for SD card access...my head unit will constantly try to read it, and after about 20 seconds, it will reset the connection with the phone...and I will end up back on USB mode on the headunit
To solve this I am using Auto-mount...
BUT if I use auto-mount, then my cached stations on Slacker aren't available...and so I have to turn off USB storage... (If USB storage is turned on and THEN off...the headunit will not default to USB again...it will leave the connection alone)
You can imagine my frustration when getting in and out of the car
Seems to me the simplest way to fix this would be to disable the USB data portion all together based on what my cell phone is connected to.
ex. If I plug the phone to my computer, I get USB storage
If I plug the phone to my headunit, it will only charge the phone
IS there a way to do that???
You could find a USB cable that only has the power wires (one came with a bluetooth headset I bought), make your own cable (cut the data line), or use something like the iPhone USB Charging Adapter ThinkGeek sells (I do not know if it would stop the car from seeing the phone)
Hey. So for the past few months, I've been able to connect my phone as a "usb thumb drive" to my car audio and play/control music directly through the headset. For some reason, over the past few days, whenever I connect my phone, the car will recognize the USB, connect, show a song playing, and then disconnect within seconds. And then my car is just waiting for a USB to be plugged in.
Have any of you had a similar issue or know what I can do to fix it?
BTW, my phone is currently fully stock, replacement phone from Sprint.
You have a firm usb connection? Also you enabled mount as usb on the phone?
I suggest putting some songs on a real USB flash drive, and see if the same thing happens. This way, you can help narrow down the problem to either your EVO or your car audio unit.
Another thing to consider is if you added any new files to your SD Card since it stopped working. Embedded devices with USB mass storage support can be pretty buggy, and its software can choke if it encounters a particular file that it doesn't know how to deal with.
Been reading tons of threads about replacing my stock head unit with a Nexus 7.
Couple of things I can't seem to figure out.
1. I have a 2003 Toyota sequoia with JBL. I have a wiring harness adapter that will connect to the sound system (I think there is an existing stock amp). I want to use the micro USB to charge and for audio, and I ordered the splitter cable for that. Can I connect that directly to my existing amp or do I need a USB DAC?
2. My plan is to mount the Nexus in the dash, so that it is not removeable. Should I run a USB connection through a hub for doing updates?
3. Is it better to use a 2012 or 2013 model?
I plan to use it for music, GPS (probably waze), and as BT connection for my phone.
Thanks in advance for any insight.
Someone suggested this:
"you normally can't connect a USB DAC to the tablet and charge the tablet at the same time through the same microUSB port"
Does that sound right?
fuzzie said:
Someone suggested this:
"you normally can't connect a USB DAC to the tablet and charge the tablet at the same time through the same microUSB port"
Does that sound right?
Click to expand...
Click to collapse
Well, that somebody was wrong. My setup, thanks to Timur, charges my N7 and powers the DAC no problem.
I also would like to know. I read that someone used blisspop along with an additional kernel, but I cannot seem to find any install files for blisspop nexus 7 grouper.
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
jbhtexas said:
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
Click to expand...
Click to collapse
Do any other phones work with this method?
I remember my brothers Civic came with USB for audio, and you could let in a USB stick for example, but it would only charge the device when plugged in.
Could just be how the headset is?
andybones said:
Do any other phones work with this method?
I remember my brothers Civic came with USB for audio, and you could let in a USB stick for example, but it would only charge the device when plugged in.
Could just be how the headset is?
Click to expand...
Click to collapse
If you google around, various posters in various forums report that it works, some even with older HTC devices. I have never tried it before, because I never had a car stereo with a USB input prior to the Kenwood I installed.
jbhtexas said:
If you google around, various posters in various forums report that it works, some even with older HTC devices. I have never tried it before, because I never had a car stereo with a USB input prior to the Kenwood I installed.
Click to expand...
Click to collapse
When I had similar issues as you on my old Samsung phone and Kenwood deck, the problem was the USB cable I was using. It was not recognized by either one of the devices as a data cable. Actually the cable itself was fine for other uses but just wasn't playing nice with one or both of the devices. Have you tried with the oem cable that came with the phone itself?
In my opinion, if your Kenwood supports Android Auto and yet that feature doesn't pick up your phone with Android Auto app at all, then it's a sign that the cable you're using is not up to the task.
Tarima said:
When I had similar issues as you on my old Samsung phone and Kenwood deck, the problem was the USB cable I was using. It was not recognized by either one of the devices as a data cable. Actually the cable itself was fine for other uses but just wasn't playing nice with one or both of the devices. Have you tried with the oem cable that came with the phone itself?
In my opinion, if your Kenwood supports Android Auto and yet that feature doesn't pick up your phone with Android Auto app at all, then it's a sign that the cable you're using is not up to the task.
Click to expand...
Click to collapse
I am using the HTC cable that came with the phone, model DC M700 / DC 1605. I also tried a USB-C cable that I bought from Amazon, and it doesn't work either.
jbhtexas said:
Hello!
I recently installed a Kenwood KDC-BT768HD in my vehicle. This unit has USB 2.0 ports and is supposed to support Andoird Audio. When I plug my (or my wife's) HTC 10 into the Kenwood's USB ports, with the HTC USB cable, the HTC 10 will charge, but the Kenwood does not recognize that anything is plugged in to it, and the HTC 10 doesn't recognize that anything has been plugged into it either. The Kenwood just says "NO DEVICE" and If I go to the USB settings in the HTC 10, everything is greyed out, so there is no way to set the USB mode. The HTC 10 works fine when I plug it into my PC or USB OTG cable, and the Kenwood recognizes when other things are plugged into its USB ports. Bluetooth seems to work fine. I am running stock Andorid 7.0 with the latest updates from Verizon.
I had USB debugging on, but turning it off didn't fix the problem. I also went through all the USB modes in the Developler options, and turned off Developer options altogether, but neither of those fixed the problem. I tried a different third-party cable that works with my PC, but it doesn't work either.
Any suggestions?
Thanks!
Click to expand...
Click to collapse
I have a similar problem with a Pioneer and MirrorLink, it worked fine before Android 7. You should see if there is a required Kenwood app that needs to be installed, that's the only way I could get my 10 with Android 7 to be recognized by my stereo.
jbhtexas said:
I am using the HTC cable that came with the phone, model DC M700 / DC 1605. I also tried a USB-C cable that I bought from Amazon, and it doesn't work either.
Click to expand...
Click to collapse
Have you tried Android Auto to see if that works at least?
Tarima said:
Have you tried Android Auto to see if that works at least?
Click to expand...
Click to collapse
I tried Android Auto, but it doesn't work.
lightweaponx said:
I have a similar problem with a Pioneer and MirrorLink, it worked fine before Android 7. You should see if there is a required Kenwood app that needs to be installed, that's the only way I could get my 10 with Android 7 to be recognized by my stereo.
Click to expand...
Click to collapse
There is a Kenwood app that I have installed, but it says it supports Android 6...nothing about Android 7. When I run the app have have the phone plugged in, it doesn't recognize the Kenwood.
Upon plugging the Android phone into the Kenwood, the Kenwood is supposed to offer to download the app, but it doesn't, likely because it doesn't recognize that anything is plugged in.
jbhtexas said:
There is a Kenwood app that I have installed, but it says it supports Android 6...nothing about Android 7. When I run the app have have the phone plugged in, it doesn't recognize the Kenwood.
Upon plugging the Android phone into the Kenwood, the Kenwood is supposed to offer to download the app, but it doesn't, likely because it doesn't recognize that anything is plugged in.
Click to expand...
Click to collapse
I feel like this is a problem with 7.0, it would probably work on 6. Is there a firmware update for the stereo itself?
My phone wouldn't be recognized in my Audi either, tried everything, wife's iPhone car play worked fine.... very frustrating... So I would just use it to charge. Then one day it started working! So much better than the Audi MMI. No idea what changed to make it work. Maybe Google play services updated?
Sent from my HTC6545LVW using Tapatalk
lightweaponx said:
I feel like this is a problem with 7.0, it would probably work on 6. Is there a firmware update for the stereo itself?
Click to expand...
Click to collapse
The firmware in the Kenwood was quite out of date. I updated it, but unfortunately, it did not help the problem.
jbhtexas said:
The firmware in the Kenwood was quite out of date. I updated it, but unfortunately, it did not help the problem.
Click to expand...
Click to collapse
If the phone is rooted you could try loading up a 6.0 ROM and see if that works, if not you may have to bug HTC and Kenwood.
lightweaponx said:
If the phone is rooted you could try loading up a 6.0 ROM and see if that works, if not you may have to bug HTC and Kenwood.
Click to expand...
Click to collapse
I contacted Kenwood, and their response was that the phone is not on the USB compatibility list, and thus there is no guarantee that it will work. Their compatibility list is rather lame....
http://www.kenwood.com/cs/ce/aoa2/
jbhtexas said:
I contacted Kenwood, and their response was that the phone is not on the USB compatibility list, and thus there is no guarantee that it will work. Their compatibility list is rather lame....
http://www.kenwood.com/cs/ce/aoa2/
Click to expand...
Click to collapse
The only other thing you could do is hope HTC or Kenwood releases an update that fixes the problem or try an Android 6 ROM if the phone is rooted.
How is your bluetooth streaming? I have a Tmobile HTC 10 and have audio skipping issues with any of the newer Kenwood decks. It works perfectly with the BT515HD a 2014 model, I upgraded to the new KDC x701, skipping issues, switched to the top of the line KDc x998, another early 2014 model, streams perfectly but tags on apps like Pandora don't go through. Switched again to the new release of what I started with, BT518HD, bluetooth streaming skipping issues. I f you can stream perfectly, I'd like to try the firmware you are currently on.
Hiya, new to forum. Done a search and couldn't find any specific help for my issue.
I have an XTRONS android 12 headunit specific shape for a MK4 Ford Mondeo. Model number is PFS7FSFA_B.
The issue I have is with the USB cable and android auto. I had issues with the stock software for screen mirroring in that it needs an Internet connection (better than a mobile hotspot I've read) to validate or something. Couldn't get that to work. Some googling found me the HUR Headunit Reloaded app.
Paid for that and downloaded it. Managed to get it all setup and working. Then after changing screen resolution in the HUR app it would no longer see that I connected my phone. It would charge but wouldnt actually connect.
I'm using the red USB cable that plugs into the headunit per the instructions.
Issue seems intermittent as yesterday I got it working after a lot of fiddling, then it stopped. Then I pulled the power to the Headunit and it got going again.
But this morning not working again.
I attempted to download the wireless app to try that but couldn't really understand which device needed the hotspot running on it as the instructions were a little ambiguous.
Phone is a pixel 7 pro.
Where should I start looking to troubleshoot this issue. OR are these units just junk in the first place?
Any help appreciated
For reference the USB cable I'm using is brand new, high quality braided cable, data transfer on other devices is fine as I checked, I also tried a couple different cables to the same avail. Leading me to think it's either a software issue in the headunit/app or an actual hardware issue?
Evening update on my USB woes, its now stopped charging the phone at all, it does register that I have plugged the cable into the phone, but when I check the "battery app" on the phone it does not show that its charging.
There were 2 USB cables in the box with this unit, a 4pin plug with a red USB socket, and a 6pin plug with a black USB socket, all the info seemed to point towards the red one labelled mirror link that I need to use. Can anyone confirm if this is correct? Do the 4/6pin plugs work differently or have different power outputs or something?