I have updated my note 2 to 4.3...
and now when i go to download mode and connect phone to pc i doesn't appear
on odin also
Check the USB Debugging Mode in the settings, also Re-install the drivers.
Pull the battery and reboot to download and start odin
press *#7284# on dialpad and select UART as Modem and USB as PDA. press save and reset.
Related
help i tried to upgrade 2.1 but failed.When turn phone on in display see icons of phone and computers and between this (!).What to do?
1. Remove battery, reinsert it
2. Put phone into download mode and connect USB cable
3. Start Odin, load spica_jc3.ops file as OPS and firmware
4. Except standard options check also Debug ONLY and Parameter Clear
5. Flash
This should help you
hello all
my galaxy's start in download mode, connect the USB cable to PC and start normal.
What can I do
Use odin to re-flash it and make it start over, if you can get download mode you should have no problem...
Hi. I tried to find a thread with my problem but I couldn't so I'm creating this one.
I have a Samsung Galaxy s4 i9500 with a custom kit kat rom (OzcanRom). I tried to revert to stock using odin but I can't make download mode work. When I start the phone in download mode it immediately says "Downloading do not turn off target" altough I haven't connected to the computer yet. The phone does not respond so I have to take the battery to restart. If I connect the phone to the computer, the computer doesn't recognize it. It doesn't even appears on device manager (I also looked for unknown devices and it is not there).
I tried to do a factory reset through recovery but it doesn't work. Odin worked previously so I don't know what it doesn't works now.
alexsaez said:
Hi. I tried to find a thread with my problem but I couldn't so I'm creating this one.
I have a Samsung Galaxy s4 i9500 with a custom kit kat rom (OzcanRom). I tried to revert to stock using odin but I can't make download mode work. When I start the phone in download mode it immediately says "Downloading do not turn off target" altough I haven't connected to the computer yet. The phone does not respond so I have to take the battery to restart. If I connect the phone to the computer, the computer doesn't recognize it. It doesn't even appears on device manager (I also looked for unknown devices and it is not there).
I tried to do a factory reset through recovery but it doesn't work. Odin worked previously so I don't know what it doesn't works now.
Click to expand...
Click to collapse
Hi
The message Downloading do not turn off target is normal when in download mode even if you are not connected to the PC , what you mean the phone does not respond? what do you see in Odin , does Odin acknowledge that the phone is connected?
If Odin does not respond try this:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
From this thread
http://forum.xda-developers.com/showthread.php?t=2265477
solved
MAX 404 said:
Hi
The message Downloading do not turn off target is normal when in download mode even if you are not connected to the PC , what you mean the phone does not respond? what do you see in Odin , does Odin acknowledge that the phone is connected?
If Odin does not respond try this:
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
From this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
You were right, another usb cable solved the problem. The message "Downloading do not turn off target was misleading". Thank you so much!
Hi to everyone, I'm having bad time finding a solution to my problem, but for now nothing helped me.
I've CM 12.1 installed on my Note 3. Since I installed it to my phone, I've never be able to connect my phone to the computer.
When I click on settings-->storage-->usb computer connection, it says:
"USB is now disconnected".
This doesn't allow me to set the usb connection, and so my pc doesn't recognize my phone.
On my pc, it says: "Unknown device, code 43" (looks like it doesn't have drivers).
I've tried everything:
1) different cable, pc, usb connected directly to main board;
2) reboot phone;
3) all the steps about enabling and disabling developer option:
**********************************************************************************************
To see the USB computer connection options:
1. Developer>Disable USB debugging.
2. Reboot.
3. Connect to PC.
4. Settings>Storage, press the overflow button (three dots).
If that does not do it, then:
1. Disable developer options.
2. Reboot.
3. Connect to PC.
4. Settings>Storage, press the overflow button (three dots).
5. Re enable developer options. (About Phone>Build Number-6x)
**********************************************************************************************
But, apparently, nothing changed.
I want to solve this situation becasue I need to install stock firmware now.
Another problem is that I've tryed to install twrp recovery (using flashify), but this made my phone go in recovery bootloop, and so now, It seems I can't access no custom recovery.
If there is no solution to the problem above, at least help me to install the right twrp recovery (if compatible with cyanogen mod 12.1), so I can try a stock firmware flashing using it.
Thanks for answering, hope someone can help me.
Note: I've installed 12.1-20151120-NIGHTLY-hlte version, and, if I search update it says that there are some updates, but I cannot upgrade my system.
Have you installed the drivers on the PC ??
Usb cable is damaged or lack of driver on PC.
I haVe tried EVERYTHING TO GET ODIN to recognize s5... IT DOES NOT SHOW UP
All drivers are fine... shows up on my computer running vista... i can access files on phone and sd card BUT NOT ODIn
I downloaded different versions of Odin and it did not work. I install drivers reinstalled install k i e s also I unchecked and check debugging and it did not work why doesn't Odin recognize my phone what else can I use to root if Odin does not work
I have read about this and I cannot seem to find the answer I have installed reinstalled drivers Kies different cables everything the cables work because I can access my phone SD card and read the files on my computer but Odin does not recognize my S5 what am I doing wrong or what can I use instead of Odin to root my phone
You need to put the phone in download mode.
Power off your Samsung phone, press and hold Volume Down, Home and Power keys at the same time.
Release all three buttons when Samsung phone reboot and you see a warning sign.
Press Volume Up to enter the main screen of Recovery mode.
jerfsonpaiva said:
You need to put the phone in download mode.
Power off your Samsung phone, press and hold Volume Down, Home and Power keys at the same time.
Release all three buttons when Samsung phone reboot and you see a warning sign.
Press Volume Up to enter the main screen of Recovery mode.
Click to expand...
Click to collapse
It is in download mode it still does not show up on Odin
Try another computer. Maybe is a conflit with a driver of another hardware.
jerfsonpaiva said:
Try another computer. Maybe is a conflit with a driver of another hardware.
Click to expand...
Click to collapse
Tried macbook jodin
Ttied mac jodin.. then ofin using Wine... then windows 10 ?? Same thing
TO GET ODIN to recognize s5... IT DOES NOT SHOW UP
Restart into download mode and run Odin as Administrator, it will surely recognize it
shoosterjonesr said:
Restart into download mode and run Odin as Administrator, it will surely recognize it
Click to expand...
Click to collapse
I have deleted reboot3d intalled multiple times and ran in administrator BUT it does not show up on odin
It shows up on computer BUT NOT on odin