Related
Ive been looking around the forum for an untouched and odexed 4.3 ge rom, basically i want a rom thats plain google edition thats untouched, ie as it would be on the actual GE S4 (stock kernel and everything).
does such a thing exist? the i saw on android dev section of xda are usually modified, and deodexed, or otherwise they are old 4.3 leaks and development has been discontinued.
anyone else looking for something similar, does a rom like that even exist or am i going to have to make do with the modded ones?
-thanks for any replies. :good:
http://forum.xda-developers.com/showthread.php?p=44655800
Sent from my Nexus 10
I was hoping somebody could tell me a google edition rom that works with safe strap twerp ad runs smooth not buggy really dont care if its 4.2.2 or 4.3 please if anyone who could relay me with some information about this it's much appreciated!? cant stand the mf3 firmware -_-
re: google edition roms
Tak23 said:
I was hoping somebody could tell me a google edition rom that works with safe strap twerp ad runs smooth not buggy really dont care if its 4.2.2 or 4.3 please if anyone who could relay me with some information about this it's much appreciated!? cant stand the mf3 firmware -_-
Click to expand...
Click to collapse
Read this thread: http://forum.xda-developers.com/show....php?t=2428254
Currently there are only three full featured custom roms which are fully compatible with safestrap.
My favorite one is the "darthstalker v9" custom rom.
However if you are looking for a compatible Google Edition rom you will find a couple of them
as well in the link above. You will see the links to all compatible roms in the the very first post.
Good luck!
Remember it takes less time to click the "THANKS" button than it takes to type "thank you"
Hello guys, sorry to take your time reading this but I really got confused.
I see many posts of people that succcessfully ported Kitkat from Nexus 5 to Nexus 4.
Also, saw people that could install Stock 4.4 Kit kat Rom by flashing binaries and factory images. (And I am too noob for that).
So, my point is, didn't anyone was capable to get stock by flashing binaries and etc and them, turn the rom available for download for everyone?
I think if it was possible, it would reduce A LOT the threads over here.
it is available for download silly.
you have aosp and the factory img. factory img you flash via fastboot, and there are plenty of 4.4 aosp builds that you can flash via your recovery. just because someone flashes the factory img via fastboot onto their phone, does NM ot mean that they can provide to you whats on their phone as a zip. it has to be compiled as a rom for you to flash. spend some of your time going through the dev and original dev forums, find yourself a eom to flash.
Heitor Amat said:
Hello guys, sorry to take your time reading this but I really got confused.
I see many posts of people that succcessfully ported Kitkat from Nexus 5 to Nexus 4.
Also, saw people that could install Stock 4.4 Kit kat Rom by flashing binaries and factory images. (And I am too noob for that).
So, my point is, didn't anyone was capable to get stock by flashing binaries and etc and them, turn the rom available for download for everyone?
I think if it was possible, it would reduce A LOT the threads over here.
Click to expand...
Click to collapse
You download the deodexed official 4.4 kitkat rom here or check out 4.4 custom roms in the development forum.
http://forum.xda-developers.com/showthread.php?t=2010887
Tks
simms22 said:
it is available for download silly.
you have aosp and the factory img. factory img you flash via fastboot, and there are plenty of 4.4 aosp builds that you can flash via your recovery. just because someone flashes the factory img via fastboot onto their phone, does NM ot mean that they can provide to you whats on their phone as a zip. it has to be compiled as a rom for you to flash. spend some of your time going through the dev and original dev forums, find yourself a eom to flash.
Click to expand...
Click to collapse
I think that I will wait for the OTA, I am too much noob to do those stuffs and devices in Brazil are really expensive to get bricked.
Also, I hear that the stock version for N4 (4.4 kit kat) is apparently waaay too similar to 4.3, does not brings transparent nav bars and notifications or white toogles. Also does not bring google experience of google now. Is that truth?
I was using google launcher for N5 and that would be great if I do not have to select always the launcher... everytime I select "always use this laucher", my device keeps me asking about what launcher would I like to use.
Heitor Amat said:
I think that I will wait for the OTA, I am too much noob to do those stuffs and devices in Brazil are really expensive to get bricked.
Also, I hear that the stock version for N4 (4.4 kit kat) is apparently waaay too similar to 4.3, does not brings transparent nav bars and notifications or white toogles. Also does not bring google experience of google now. Is that truth?
I was using google launcher for N5 and that would be great if I do not have to select always the launcher... everytime I select "always use this laucher", my device keeps me asking about what launcher would I like to use.
Click to expand...
Click to collapse
It is true that you don't get transparency on the Nexus 4 with Android 4.4 because it still uses (pretty much) the same launcher as for Android 4.3. You can, however, install the GEL as a replacement launcher and make it your default launcher. That will enable transparency and the full GEL experience with Google Now as the far left panel. You can find the instructions here:
h t t p : / / androidpolice.com/2013/11/13/how-to-try-the-google-experience-launcher-with-translucent-bars-and-google-now-once-you-get-your-kitkat-update-apk-download/ (please copy and paste the link as XDA won't allow me to post links until I'm a more "mature" user )
rickxray said:
It is true that you don't get transparency on the Nexus 4 with Android 4.4 because it still uses (pretty much) the same launcher as for Android 4.3. You can, however, install the GEL as a replacement launcher and make it your default launcher. That will enable transparency and the full GEL experience with Google Now as the far left panel. You can find the instructions here:
h t t p : / / androidpolice.com/2013/11/13/how-to-try-the-google-experience-launcher-with-translucent-bars-and-google-now-once-you-get-your-kitkat-update-apk-download/ (please copy and paste the link as XDA won't allow me to post links until I'm a more "mature" user )
Click to expand...
Click to collapse
Hey, tks for that.
But this will only be enabled (transp. bar and etc) with android 4.4 or android 4.3 as well?
Is there any way to impeach that the stock launcher keeps appearing for me?
Heitor Amat said:
Hey, tks for that.
But this will only be enabled (transp. bar and etc) with android 4.4 or android 4.3 as well?
Is there any way to impeach that the stock launcher keeps appearing for me?
Click to expand...
Click to collapse
The transparency only works with android 4.4. You might be able to get it on android 4.3 using the nova launcher but I haven't tested it so I can't personally guarantee.
You should be able to select the default launcher and the system should keep it like that. Just make sure you press the "Always" button before selecting your option.
rickxray said:
The transparency only works with android 4.4. You might be able to get it on android 4.3 using the nova launcher but I haven't tested it so I can't personally guarantee.
You should be able to select the default launcher and the system should keep it like that. Just make sure you press the "Always" button before selecting your option.
Click to expand...
Click to collapse
Well I do this. but it does not work..
I mean.. it stays for 5, 10 minutes and them.. it asks again for it.
ps: nova does not works, i tried =)
Noob Question - Install Android 4.4 on low end tablet
Hi,
I don't know where to post this question as am new to XDA and since my question is obviously a noob one, apologies if I have posted in the wrong one.
I have a low end tablet, Prestigio MultiPad PMP5080B, running Android ICS. I would like to install/update Android 4.4, preferably vanilla (4.4.2 AOSP). How do I go on about doing it. There seem to many a method, can someone point to me a reliable and easy method (with the link to the page if available ).
mhmhafniyaas said:
Hi,
I don't know where to post this question as am new to XDA and since my question is obviously a noob one, apologies if I have posted in the wrong one.
I have a low end tablet, Prestigio MultiPad PMP5080B, running Android ICS. I would like to install/update Android 4.4, preferably vanilla (4.4.2 AOSP). How do I go on about doing it. There seem to many a method, can someone point to me a reliable and easy method (with the link to the page if available ).
Click to expand...
Click to collapse
Good place to start:
http://forum.xda-developers.com/showthread.php?t=2025740
I'm still on a stock rooted 4.2.2 Rom and I need to upgrade to 4.4
I've really had no issues with the touchwiz and I'm running the KM kernel, but from what I was told I need to unroot to get 4.4. I don't know if that's true or not, but seeing as you don't have that many touchwiz roms here maybe I should go with ASOP instead? I was looking at the master list of roms but are the roms carrier dependent?
but from what I was told I need to unroot to get 4.4.
Click to expand...
Click to collapse
You can update your phone through settings (as long as you didn't mess with system files and apps) but you will definitely lose root and get knox.
I was looking at the master list of roms but are the roms carrier dependent?
Click to expand...
Click to collapse
Yes, roms are carrier dependent (with the exception of CM11 nightly builds, which are now unified across all carriers, the rest provide separate builds for different carriers)
carefree12 said:
You can update your phone through settings (as long as you didn't mess with system files and apps) but you will definitely lose root and get knox.
Yes, roms are carrier dependent (with the exception of CM11 nightly builds, which are now unified across all carriers, the rest provide separate builds for different carriers)
Click to expand...
Click to collapse
My phone is rooted but running the stock rom, when it came time to upgrade it would not upgrade at all, I forgot what it would hang at but it ended not doing anything, so getting tired of seeing the upgrade was ready to be installed I hid the message.
But now I need the upgrade because of Google Wallet and tap & pay.
So as far as getting another rom I assume I should be just looking under my carries forum here instead of the master list? Now having said that.. OK say I find a ASOP with 4.2 can I just use that instead of unrooting and then doing the update?
In other words installing a custom ASOP rom would still get me on 4.2 as well?
Samsungmobile said:
My phone is rooted but running the stock rom, when it came time to upgrade it would not upgrade at all, I forgot what it would hang at but it ended not doing anything, so getting tired of seeing the upgrade was ready to be installed I hid the message.
But now I need the upgrade because of Google Wallet and tap & pay.
So as far as getting another rom I assume I should be just looking under my carries forum here instead of the master list? Now having said that.. OK say I find a ASOP with 4.2 can I just use that instead of unrooting and then doing the update?
In other words installing a custom ASOP rom would still get me on 4.2 as well?
Click to expand...
Click to collapse
It depends on what version of android the rom features. CM11 for example is a 4.4 KitKat rom so if you install CM11 you would have 4.4 AOSP rom that is close to the original AOSP rom you would find on Google devices.
For some reason I can't boot my phone into recovery.. I'm holding vol up, home and power and I see it saying booting recovery in the upper left but if I keep holding the buttons the screen and the phone just turns back off again.
*edit
I just noticed I use TWRP Recovery so I think I have to start it from the phone being on.
Well this is odd.. OK so I moved the zip file to the root of the SD card and looking at the recovery and it's not listed under the root of the SD card.. I don't get it.
Oh never mind forgot the setting to switch to SD card
im driving myself insane reading threads and getting confused. i just got an s4 i337 and its running mk2. i really want to run cm11 or atleast a stock aosp rom. im not enjoying touchwiz at all. am i even able to do that? i got saferoot and safestrap but after that im confused.
The Jack of Clubs said:
im driving myself insane reading threads and getting confused. i just got an s4 i337 and its running mk2. i really want to run cm11 or atleast a stock aosp rom. im not enjoying touchwiz at all. am i even able to do that? i got saferoot and safestrap but after that im confused.
Click to expand...
Click to collapse
Negative. Only touchwiz based roms will work with 4.3 MK2.
Your best bet is using an AOSP themed ROM such as blackbox or purified. You can find some more info here... http://forum.xda-developers.com/showthread.php?t=2616221
Or, more simply, install a new launcher such as apex or nova and then you won't have to worry about touchwiz
That's extremely disappointing. I'm really starting to hate this phone and I think I'm going to call att tomorrow and see if I can get something else. Perhaps an htc one or lg g2. But this isn't going to work out. This is not the level of customization I want. Touch wiz goes deeper than just the launcher, and what happens in another year or two when att stops providing updates? No, I'm done and I don't want this thing anymore. Bad ATT and bad Samsung.
Sent from my TouchPad using XDA Premium 4 mobile app
The Jack of Clubs said:
im driving myself insane reading threads and getting confused. i just got an s4 i337 and its running mk2. i really want to run cm11 or atleast a stock aosp rom. im not enjoying touchwiz at all. am i even able to do that? i got saferoot and safestrap but after that im confused.
Click to expand...
Click to collapse
I'm no expert, but anything other than MDB and MDL means a locked bootloader. AFAIK that means, all safestrap does is let you load a different rom, but that rom has to be based on the touchwiz kernel. That means no AOSP and that means no CM11. I'm in the same boat.
Hello,
Sorry to revive this after several months of inactivity, but I have exactly the same problem and am confused by the information I have found on XDA, possibly a fault of my own. I have a Galaxy S4 AT&T i337 with MK2 4.3, and I want to run CM11.
A much much more tech savvy friend of mine setup my phone in January 2013 with CM11 using the TWRP recovery. It originally was just the AT&T stock everything. Unfortunately, I no longer have contact with him, and I have no idea how he did any of this . I was specifically running the build from here: http://forum.xda-developers.com/showthread.php?t=2383143, which is now here: http://www.handy-faq.de/forum/galax...h_app2sd_glove_mode_dual_boot_for_all_s4.html
Since then it updated automatically to the last nightlies without any issues. Two days ago, however, I updated, and my phone went into a boot loop. I booted into recovery and tried to flash the last version that worked, but that resulted in my phone staying in a boot loop without being able to boot into recovery. I then used Odin to flash the original firmware and stock ROM, and now it works fine, but I miss CM11 very badly (or more accurately I find the stock ROM annoying in comparison).
The previous posts here indicate that CM11 cannot be installed on the i337 MK2. Also, this thread http://forum.xda-developers.com/showpost.php?p=42320414&postcount=2 lead me to this thread http://forum.xda-developers.com/showthread.php?t=2428254 which says "Also, at this time, only TW based ROMs will work with SS. CM, AOSP, AOKP, MIUI, etc will not work." But I do not actually understand the difference between Safestrap and TWRP enough to know whether or not Safestrap not allowing CM11 means this model won't allow CM11 at all.
I would like to understand why there is indication that CM11 cannot be put on the i337 MK2 when my friend somehow succeeded. Then perhaps we can succeed in devising a method to install CM11 on this model. I apologize for not having any proof that it worked, but I swear I ran CM11 on this exact model and firmware build for many months very happily.
Does anyone have any thoughts on this discrepancy? Sorry if this is a naive/stupid post. Thanks in advance to anyone who chimes in.