Related
So it now seems clear that OTA will NOT come for the very nice Google IO version of this device, I recently learned that the rooted versions will handle DRM material from Google play,,(correct?) so I think I'm ready to take the plunge,,
Any advice and step by step instructions? Is there a good JB version (if I'm going to do it might as well go all the way?)
Have not rooted the thing at all, so a bit nervous,, I have installed early ADB's on other devices.. so I get generally how the process should go,, but of course the 10.1 is different and the GIO one is even different from all the rest.
Direction/advice and cautions appreciated.. I love the device and don't want a brick in it's place..
And yes I have both the Nexus 7 and Galaxy Nexus from this year's GIO...
Thanks in advance!:fingers-crossed:
You need to make use of the search feature here. Lots of great info on rooting and flashing.
The Google I/O version is a different build and doesn't get any updates pushed to it by Samsung.
Thanks but...
BretonGirl said:
You need to make use of the search feature here. Lots of great info on rooting and flashing.
The Google I/O version is a different build and doesn't get any updates pushed to it by Samsung.
Click to expand...
Click to collapse
Yes I have been searching diligently but as you note the GIO tab is "different" so it is not clear which run and which are eligible solutions.
I see from the views that a number are interested in this question but from searching I don't see great solutions..
It seems that the JB versions are not fully baked.
The ICS versions each seem to have issues and it is not clear which if any are running smoothly on the GIO version.
Hence my attempt by asking the question, to gain some authoritative clarity!
The google io version is the same just is fully unlocked by default. Samsung has indeed pushed more then 1 update to this device in the past. Doesn't seem like they will further. It is NOT 100% GOOGLE on this tab... Not sure why everyone thinks so. Anyways, anything that runs on the retail versions will run on the io just make sure u don't flash a new bootloader keep the one u already have. Use Odin to flash a custom recovery then use that recovery to flash a CUSTOM Rom. I'm running cm10 with very few problems
Sent from my PG86100 using xda premium
Thanks! That helps!
That will help a lot.. The clarity on how the GIO version fits in is the main thing that was confusing me.
Now I have a path to follow.. I think.. The CM10 looks very tempting with JB from what I have been reading here,, I take it the only somewhat real issue is the front camera?
xTONEx said:
The google io version is the same just is fully unlocked by default. Samsung has indeed pushed more then 1 update to this device in the past. Doesn't seem like they will further. It is NOT 100% GOOGLE on this tab... Not sure why everyone thinks so. Anyways, anything that runs on the retail versions will run on the io just make sure u don't flash a new bootloader keep the one u already have. Use Odin to flash a custom recovery then use that recovery to flash a CUSTOM Rom. I'm running cm10 with very few problems
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Sorry but need pointers..
A quick scan and I could not locate the Odin recovery instructions or software, and can you clarify that you mean the CM10 rom, not sure if you are implying something more by specifying CUSTOM Rom?
Anything I need to know about Not replacing the bootloader?
I'm assuming that I can ignore instructions relating to rooting/unlocking? Since it is a GIO device?
Do i need to do anything special to keep apps/access to app store, Google provided apps Gmail etc or does CM10 have all the basics??
Sorry to be so basic...Just don't want to end up with a shiny brick!
xTONEx said:
The google io version is the same just is fully unlocked by default. Samsung has indeed pushed more then 1 update to this device in the past. Doesn't seem like they will further. It is NOT 100% GOOGLE on this tab... Not sure why everyone thinks so. Anyways, anything that runs on the retail versions will run on the io just make sure u don't flash a new bootloader keep the one u already have. Use Odin to flash a custom recovery then use that recovery to flash a CUSTOM Rom. I'm running cm10 with very few problems
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
dartdog said:
A quick scan and I could not locate the Odin recovery instructions or software, and can you clarify that you mean the CM10 rom, not sure if you are implying something more by specifying CUSTOM Rom?
Anything I need to know about Not replacing the bootloader?
I'm assuming that I can ignore instructions relating to rooting/unlocking? Since it is a GIO device?
Do i need to do anything special to keep apps/access to app store, Google provided apps Gmail etc or does CM10 have all the basics??
Sorry to be so basic...Just don't want to end up with a shiny brick!
Click to expand...
Click to collapse
Google is your friend. You'll find ODIN and instructions on how to use it easily.
I believe you have to flash or install the Google Framwork apk separately. I'm sure the CM10 folks have a sticky or FAQ to help.
Read as much as you can about the process before doing it!
Found this on Odin on Android Authority
this appears to answer some of my questions at least where to find Odin
http://www.androidauthority.com/gal...kmod-recovery-5-5-0-4-custom-recovery-102580/
But of course I want to go to CM10 so I need to think how that modifies things...
BretonGirl said:
Google is your friend. You'll find ODIN and instructions on how to use it easily.
I believe you have to flash or install the Google Framwork apk separately. I'm sure the CM10 folks have a sticky or FAQ to help.
Read as much as you can about the process before doing it!
Click to expand...
Click to collapse
I have had my S4 since switching to ATT in late November and have been following the XDA forums very closely since then. It was thanks to the XDA forums that I was able to root my S4.
However, no matter how far, wide, and meticulously I look on the site, there is no mention of the existence of running KIT-KAT on the i337 S4 for AT&T, save for the Google Play Edition and the version with the octacore etc.
I know these forums are strict (and should be) about questions being asked more than once, but I am not asking when KITKAT will be released through AT&T or even Samsung because I honestly don't care. I simply want to get KitKat on my device running with relative stability. I know there are custom roms out there, but most of them were released...a month ago or so? MAYBE I'm missing something, but if anyone here is in similar shoes, I would appreciate it if you'd echo my sentiments/request to find out if it can be done and how.
Anyone who knows how I can learn more about loading ASOP onto my i337 S4, I would greatly appreciate it. If the limitation is a locked boot loader that you CANNOT get around (excluding safestrap), do let me know! I'm sure a lot of people would benefit from the answer to this question.
Otherwise I'm going to go buy the Google Play Edition of one of the Android devices that has an unlocked boot loader.
Cheers,
Justin
justintime001 said:
I have had my S4 since switching to ATT in late November and have been following the XDA forums very closely since then. It was thanks to the XDA forums that I was able to root my S4.
However, no matter how far, wide, and meticulously I look on the site, there is no mention of the existence of running KIT-KAT on the i337 S4 for AT&T, save for the Google Play Edition and the version with the octacore etc.
I know these forums are strict (and should be) about questions being asked more than once, but I am not asking when KITKAT will be released through AT&T or even Samsung because I honestly don't care. I simply want to get KitKat on my device running with relative stability. I know there are custom roms out there, but most of them were released...a month ago or so? MAYBE I'm missing something, but if anyone here is in similar shoes, I would appreciate it if you'd echo my sentiments/request to find out if it can be done and how.
Anyone who knows how I can learn more about loading ASOP onto my i337 S4, I would greatly appreciate it. If the limitation is a locked boot loader that you CANNOT get around (excluding safestrap), do let me know! I'm sure a lot of people would benefit from the answer to this question.
Otherwise I'm going to go buy the Google Play Edition of one of the Android devices that has an unlocked boot loader.
Cheers,
Justin
Click to expand...
Click to collapse
What version are you currently running. Go to about phone and post your baseband version. If the 2nd to last digit is f or higher you can't get kit kat yet. If it is before f then you are free to do whatever you want., If you are rooted you can just download rom manager from the play store and flash a recovery the easy way. Then get cyanogenmod or something for your device.
failedjedi said:
What version are you currently running. Go to about phone and post your baseband version. If the 2nd to last digit is f or higher you can't get kit kat yet. If it is before f then you are free to do whatever you want., If you are rooted you can just download rom manager from the play store and flash a recovery the easy way. Then get cyanogenmod or something for your device.
Click to expand...
Click to collapse
Thank you for your reply!!!
That is most unfortunate, since it is i337UCUEMK2 - even if I did some crazy stuff to go back to MF3, I'd be right at f anyway. ROM Manager and flashing a recovery the easy way seemed simple enough and I was going to do that but it ended up not working, then I tried using Goo Manager and that soft-bricked my phone and I spent hours getting it back to MK2 again. It's back to the way it was, but I still want to update to Kit-Kat.
Btw, could you tell me why it isn't possible because of my baseband? Thanks failedjedi, and anyone else that can offer useful information.
Cheers,
J
justintime001 said:
Thank you for your reply!!!
That is most unfortunate, since it is i337UCUEMK2 - even if I did some crazy stuff to go back to MF3, I'd be right at f anyway. ROM Manager and flashing a recovery the easy way seemed simple enough and I was going to do that but it ended up not working, then I tried using Goo Manager and that soft-bricked my phone and I spent hours getting it back to MK2 again. It's back to the way it was, but I still want to update to Kit-Kat.
Btw, could you tell me why it isn't possible because of my baseband? Thanks failedjedi, and anyone else that can offer useful information.
Cheers,
J
Click to expand...
Click to collapse
With mf3 they locked down the bootloader. So before mf3 you were able to put a custom recovery and custom roms. Since MF3 no one has figured out how to bypass it yet. With mf3 you can use safestrap to sort of get some custom roms, but it still needs to boot the stock kernel as you can't yet use a custom kernel. As a result you are limited to only 4.2.2 Touchwiz based roms working. Now safestrap has a beta for newer versions, not 100% sure what it does and does not support yet as I'm sticking with my mf3 and a 4.2.2 jellybean rom. But the beta is new and probably still buggy.
But basically since you need the stock kernel, you are limited to only the android version your current stock version is.
Yeah as an android developer, I accept that, but am not going to permit it to remain true. This might take awhile...
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
If you are a developer there are bounties out for someone to get this working on mf3>
I don't have that issue but good luck if you try--:good:
Thanks! Didn't really know there were bounties for that - worthwhile ones anyway given that im dev apps and messing with AOSP and mainly my att s4 every chance I get.
Actually id be doing it for mk2, and if it becomes apparent that mf3 is easier to do it with ill do with that since I'd just DANGEROUSLY use Odin to go back, root, sideload titpro and block the sht out of the autoupdate. From what ive seen, the intermediary version between mf3 and mk2 might be most likely. This is all conjecture anyway. Sooner or later I will allow people to be free even with contracted or used phones.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Same issues apon using The Samsung Galaxy S4 for Verizon (jfltevzw) Build MK2 rooted using vRoot (English) and using safestrap. if needed I can upload the safestrap apk or version. If I install any type of AOSP ROM the boot logo is either missng or baby blue with wierd static lines. AOKP is the only AOSP ROM that eventually boots (with static boot logo) but no wireless works, and this is the same wether MK2 and/or MJ7 modules are installed or not. the only rom I can successfuly install and use daily that has no bootloader based issues is Hyperdrive ROM For jfltevzw & jflteatt. Any info would be much apreciated!
Sent from my SCH-I545 using xda app-developers app
^ Interesting. I didn't expect anyone else to have this issue. I never read about it before. I really feel like it has something to do with SafeStrap.
Heath Cliff said:
Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Click to expand...
Click to collapse
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
REEEEEEAAAAADDDD!!!!
It's been very well documented that AOSP does not work with safestrap. Neither does loki. There currently is no way/fix to flash AOSP.
So
1. No AOSP or GPE
2. No loki
3. No flashing custom kernels
Sent from my GT-I9505 using Tapatalk
John The Rhino said:
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
Click to expand...
Click to collapse
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Heath Cliff said:
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Click to expand...
Click to collapse
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
John The Rhino said:
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
Click to expand...
Click to collapse
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Heath Cliff said:
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Click to expand...
Click to collapse
Hey man I totally understand. It's hard to watch all these other roms pop up for the original S4 & we can't flash them. But we no longer have to suffer with only the stock rom option since Hashcode's brilliant Safestrap was released. Once you get use to it, the ability of being able to multi-boot roms really kind of makes up for the locked boot loader. Soon though, we will have 4.4 Kit Kat & then we can start this process of getting off the stock rom all over again. Right? It could be worse, we could have I-phones. We do have a ever growing number of great custom TW based roms available to us here for our device. So try them, you'll be surprised how much better your phone performs. Glad I made sense & forgive my bluntness that's just how us Rhinos roll.
So I just rooted my Verizon Samsung Galaxy Note 3 with Kingo. All I have installed so far is SuperSu Pro and Titanium backup. Im on android 4.3 and I have the MJE version. (which seems to be the most uncommon because I cant find any help anywhere, so im posting this thread). All I want to know is how or if I even can get the CyanogenMod rom on my phone. This is my first android device ever and I've had it for 5 months and Im definitely never going back to Apple devices. Anyway, I just rooted, I dont care about tripping Knox because I dont have a warranty anyways. I just need someone to explain to me how to get all the things I need including CM. From what ive read I need CWM and GAPPS.
khampton_03 said:
So I just rooted my Verizon Samsung Galaxy Note 3 with Kingo. All I have installed so far is SuperSu Pro and Titanium backup. Im on android 4.3 and I have the MJE version. (which seems to be the most uncommon because I cant find any help anywhere, so im posting this thread). All I want to know is how or if I even can get the CyanogenMod rom on my phone. This is my first android device ever and I've had it for 5 months and Im definitely never going back to Apple devices. Anyway, I just rooted, I dont care about tripping Knox because I dont have a warranty anyways. I just need someone to explain to me how to get all the things I need including CM. From what ive read I need CWM and GAPPS.
Click to expand...
Click to collapse
Slow down there. Lol. Do you have a developer edition Note 3 or just a regular retail Note 3 you purchased from Verizon?
Adam Browning said:
Slow down there. Lol. Do you have a developer edition Note 3 or just a regular retail Note 3 you purchased from Verizon?
Click to expand...
Click to collapse
Lol sorry Im very new to android. I got it from Verizon but i enabled Developer mode if thats what youre asking haha.
khampton_03 said:
Lol sorry Im very new to android. I got it from Verizon but i enabled Developer mode if thats what youre asking haha.
Click to expand...
Click to collapse
It's all good lol. No, developer mode just gives you some extra features if you want to debug your device. A developer edition Note 3 is a phone that was available directly from Samsung in a small quantity. It had the bootloader unlocked, which is a must for a AOSP ROM such as Cyanogenmod. Cyanogenmod requires a custom kernal, which a retail Note 3 (that you purchase through Verizon or another retail store) can not flash due to the locked bootloader. I would suggest peeking over in the Android Development section to check out the ROMs you are able to flash. Just steer clear of the ones saying for the developer edition or DE (for short). If you're wanting a ROM that has an AOSP feel to it though, check out Eclipse.
Here is a link for the Eclipse thread: http://forum.xda-developers.com/showthread.php?t=2620723
Adam Browning said:
It's all good lol. No, developer mode just gives you some extra features if you want to debug your device. A developer edition Note 3 is a phone that was available directly from Samsung in a small quantity. It had the bootloader unlocked, which is a must for a AOSP ROM such as Cyanogenmod. Cyanogenmod requires a custom kernal, which a retail Note 3 (that you purchase through Verizon or another retail store) can not flash due to the locked bootloader. I would suggest peeking over in the Android Development section to check out the ROMs you are able to flash. Just steer clear of the ones saying for the developer edition or DE (for short). If you're wanting a ROM that has an AOSP feel to it though, check out Eclipse.
Click to expand...
Click to collapse
So could I somehow unlock the bootloader??
khampton_03 said:
So could I somehow unlock the bootloader??
Click to expand...
Click to collapse
Many people have looked into that, and no luck so far. It is still locked for devices such as ours. Kind of sucks, I know. Almost every Android phone I've owned, I have ran Cyanogenmod on it. With Verizon being difficult about locking the bootloaders, and Samsung introducing Knox, I don't think we will see a bootloader unlock anytime soon, if ever. With the new 4.4.2 leak that BeansTown106 has made available for us here:
http://forum.xda-developers.com/showthread.php?t=2726558
Kernal modules are enabled, so we may have a workaround in the near future for the locked bootloader. I would suggest not taking the OTA for 4.4.2, but instead flashing the leaked 4.4.2 that is available via that thread. Once you take the OTA, it isn't known if you'll ever be able to flash this leak, which may allow for a modified kernal and therefore AOSP ROMs. I may be mistaken in some of the details, and someone can correct me if I have said something wrong in this, but this thread will explain it a little better:
http://forum.xda-developers.com/showthread.php?t=2727876
Adam Browning said:
Many people have looked into that, and no luck so far. It is still locked for devices such as ours. Kind of sucks, I know. Almost every Android phone I've owned, I have ran Cyanogenmod on it. With Verizon being difficult about locking the bootloaders, and Samsung introducing Knox, I don't think we will see a bootloader unlock anytime soon, if ever. With the new 4.4.2 leak that BeansTown106 has made available for us here:
http://forum.xda-developers.com/showthread.php?t=2726558
Kernal modules are enabled, so we may have a workaround in the near future for the locked bootloader. I would suggest not taking the OTA for 4.4.2, but instead flashing the leaked 4.4.2 that is available via that thread. Once you take the OTA, it isn't known if you'll ever be able to flash this leak, which may allow for a modified kernal and therefore AOSP ROMs. I may be mistaken in some of the details, and someone can correct me if I have said something wrong in this, but this thread will explain it a little better:
http://forum.xda-developers.com/showthread.php?t=2727876
Click to expand...
Click to collapse
So back to the beginning haha how do I flash a rom or what should I do since I just rooted and only have supersu haha
khampton_03 said:
So back to the beginning haha how do I flash a rom or what should I do since I just rooted and only have supersu haha
Click to expand...
Click to collapse
It all depends on what you want to do. How knowledgeable are you with rooting, Odin, and flashing in general?
Adam Browning said:
It all depends on what you want to do. How knowledgeable are you with rooting, Odin, and flashing in general?
Click to expand...
Click to collapse
Ive never flashed anything and I dont know how to use odin. Lol
khampton_03 said:
Ive never flashed anything and I dont know how to use odin. Lol
Click to expand...
Click to collapse
Lol. Oh goody. Well you're in for a lot of reading then. If you're already rooted and have supersu installed, then at least you have that part out of the way. The way that we install custom ROMs onto our phones (since the bootloader is locked) is by using Safestrap, developed by Hashcode. You can find any and all information you will need on it here:
http://forum.xda-developers.com/showthread.php?t=2517610
Safestrap gives you the ability to have multiple custom ROMs on your phone, without having to flash directly over your stock ROM (if you don't want). It is an application that you download onto your phone, you then open it up and install custom recovery. Once that is completed, you will then see a Safestrap screen everytime you turn on or restart your phone. I would suggest reading through or at least skimming the thread via the link provided above.
Once you have created a ROM slot and have it selected as the active slot, you can then proceed to install a custom ROM into that slot. Once you have everything set up, you can then switch between the custom ROM in "Slot x" to the stock ROM slot, giving you a cushion in case you completely screw up.
You're going to have to decide whether or not you want to stay on the 4.3 base, or update to the 4.4.2 base leak. The only advantages of either one are strictly your personal preference. There are a few that prefer the 4.4.2 base over the 4.3 base due to one reason or another. If you want to update the the newest 4.4.2 base leak though, follow the instructions provided via this link:
http://forum.xda-developers.com/showthread.php?t=2726558
Adam Browning said:
Lol. Oh goody. Well you're in for a lot of reading then. If you're already rooted and have supersu installed, then at least you have that part out of the way. The way that we install custom ROMs onto our phones (since the bootloader is locked) is by using Safestrap, developed by Hashcode. You can find any and all information you will need on it here:
http://forum.xda-developers.com/showthread.php?t=2517610
Safestrap gives you the ability to have multiple custom ROMs on your phone, without having to flash directly over your stock ROM (if you don't want). It is an application that you download onto your phone, you then open it up and install custom recovery. Once that is completed, you will then see a Safestrap screen everytime you turn on or restart your phone. I would suggest reading through or at least skimming the thread via the link provided above.
Once you have created a ROM slot and have it selected as the active slot, you can then proceed to install a custom ROM into that slot. Once you have everything set up, you can then switch between the custom ROM in "Slot x" to the stock ROM slot, giving you a cushion in case you completely screw up.
You're going to have to decide whether or not you want to stay on the 4.3 base, or update to the 4.4.2 base leak. The only advantages of either one are strictly your personal preference. There are a few that prefer the 4.4.2 base over the 4.3 base due to one reason or another. If you want to update the the newest 4.4.2 base leak though, follow the instructions provided via this link:
http://forum.xda-developers.com/showthread.php?t=2726558
Click to expand...
Click to collapse
So I am going to install Kitkat by watching the video on the thread. He said something about making sure the "MD5's match". What does that mean?
khampton_03 said:
So I am going to install Kitkat by watching the video on the thread. He said something about making sure the "MD5's match". What does that mean?
Click to expand...
Click to collapse
That, you don't really have to worry about honestly. I never check, though it may be good practice to. Just follow along with the video in the thread and you will be good to go. Just remember that after you install 4.4.2, you cannot flash 4.3 based ROMs. Also, there is a bug in Safestrap right now that renders the ROM slots somewhat useless, though you can attempt to use them at your own risk. If you want to flash one of the 4.4.2 based ROMs afterwards, it is suggested to back up the stock ROM, and flash the custom ROM in the stock ROM slot. All I can say is, goodluck. Lol. It is a fun process, though somewhat difficult at times. If you have anymore questions after the fact, just reply here. I'll help out as much as I can. It always puts a smile on my face to help convert an Apple fanboy/girl over to Android.
Looking stock sm-230nu lollipop rom not a lot of bloatware, that runs smooth, not buggy and is stable. That can be flashed through a recovery. Oh yea had this tablet for well over 1 1/2 and never rooted nor installed any roms on it. So if you guys can point me to a great rom and tell which recovery that runs great with my device I would greatly appreciate it. Thanks
mikerowes69 said:
Looking stock sm-230nu lollipop rom not a lot of bloatware, that runs smooth, not buggy and is stable. That can be flashed through a recovery. Oh yea had this tablet for well over 1 1/2 and never rooted nor installed any roms on it. So if you guys can point me to a great rom and tell which recovery that runs great with my device I would greatly appreciate it. Thanks
Click to expand...
Click to collapse
The SM-T230, SM-T230NU, and SM-T231 have not received an official lollipop update, so to the best of my knowledge there are no stock lollipop ROMs available for your model. There is CyanogenMod 12.1 available but last I heard it was still fairly buggy and development was at a standstill.
TWRP Custom Recovery for the SM-T230/NU
There's actually several stock-based KitKat roms but the ones that seem the most popular are:
Acheron Rom
TranchidaKat
Also there are a few custom kernels which might help give your device a performance boost:
CTXz's Overclocked Kernel
Nuki-Stock-T230NU
thisisapoorusernamechoice said:
The SM-T230, SM-T230NU, and SM-T231 have not received an official lollipop update, so to the best of my knowledge there are no stock lollipop ROMs available for your model. There is CyanogenMod 12.1 available but last I heard it was still fairly buggy and development was at a standstill.
TWRP Custom Recovery for the SM-T230/NU
There's actually several stock-based KitKat roms but the ones that seem the most popular are:
Acheron Rom
TranchidaKat
Also there are a few custom kernels which might help give your device a performance boost:
CTXz's Overclocked Kernel
Nuki-Stock-T230NU
Click to expand...
Click to collapse
Thanks a lot guy. I was really hoping to find a stable non buggy lollipop rom for my device. Either way you have !e on a great start. If anyone is reading this. Is fastboot enabled to flash at the bootloader, but then again this Samsung ?
mikerowes69 said:
Thanks a lot guy. I was really hoping to find a stable non buggy lollipop rom for my device. Either way you have !e on a great start. If anyone is reading this. Is fastboot enabled to flash at the bootloader, but then again this Samsung ?
Click to expand...
Click to collapse
I hoped that info would be useful; I'm sorry I couldn't point you to any stock LP, I know that frustration. On Samsung devices, bootloader (usually referred to as download mode) you need to flash things using Odin as far as I know
thisisapoorusernamechoice said:
I hoped that info would be useful; I'm sorry I couldn't point you to any stock LP, I know that frustration. On Samsung devices, bootloader (usually referred to as download mode) you need to flash things using Odin as far as I know
Click to expand...
Click to collapse
Thank you You were very helpful.
thisisapoorusernamechoice said:
I hoped that info would be useful; I'm sorry I couldn't point you to any stock LP, I know that frustration. On Samsung devices, bootloader (usually referred to as download mode) you need to flash things using Odin as far as I know
Click to expand...
Click to collapse
Not sure what happened in our conversation. I really do appreciate your help and knowledge. As of right now, I have this tablet running white noise to a Bluetooth speaker to drown out my neighbor. I want to run a lollipop rom but I probably will have time till the end of this weekend or maybe next week to install. I am oncall for a week and really hard to get to it. If you or anyone out there knows of a lollipop rom for the "sm-t230nu" device that runs real smooth I can go for it.
As for odin, I used to purchase nothing but Samsung mobile devices in the past but the download mode with odin works but can hose the bootloader, and efs. Never had a good experience except for the older devices when Samsung actually provided the software, not why they never provided the ability to unlock the bootloader even when they used to develop nexus devices for Google. I would rather use the dd command or flash by fastboot, or use a actual recovery that is proven.
mikerowes69 said:
Not sure what happened in our conversation. I really do appreciate your help and knowledge. As of right now, I have this tablet running white noise to a Bluetooth speaker to drown out my neighbor. I want to run a lollipop rom but I probably will have time till the end of this weekend or maybe next week to install. I am oncall for a week and really hard to get to it. If you or anyone out there knows of a lollipop rom for the "sm-t230nu" device that runs real smooth I can go for it.
As for odin, I used to purchase nothing but Samsung mobile devices in the past but the download mode with odin works but can hose the bootloader, and efs. Never had a good experience except for the older devices when Samsung actually provided the software, not why they never provided the ability to unlock the bootloader even when they used to develop nexus devices for Google. I would rather use the dd command or flash by fastboot, or use a actual recovery that is proven.
Click to expand...
Click to collapse
I'm not sure what you mean, "what happened in our conversation," I was just trying to give you what info I knew to address your questions. If I gave you faulty info or didn't adequately address your questions, I'm sorry, but there was no malicious intent. I'm not an expert and it sounds like you might have a better handle on the lower-level stuff. As I said, from all that I've read, the only lollipop available for the SM-T230NU is the buggy CM 12.1 builds I linked to. Odin has always worked fine for me but I understand if you'd rather not use it. I linked to TWRP recovery in my first post, but here it is again:
TWRP Custom Recovery
Also there is Philz Touch, which is a touch-screen version of ClockworkMod Recovery:
Philz Touch Recovery