Database Users

[Q] First blue screen, now boot loop.

Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.

Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?

Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.

Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]

I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.

PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)

Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)

Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.

just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..

Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.

hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!

Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started

i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off

astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??

Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little

U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App

all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^

How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link

Looks like you are not having much luck. Did you try to factory reset?

astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much

[Q] LG Optimus L3 E405 Recovery Dead?

Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster

umm
Anyone??

Spudster1 said:
Anyone??
Click to expand...
Click to collapse
Perhaps you can go to ROM Manager, uninstall Recovery, then re-install it?
I don't really know. I'm sorta new to this stuff.

hard reset
Spudster1 said:
Hello,
This morning I tried to root my phone so that I can force everything to be moved to a sd card since the storage of the system is low not enough to install apps and to install A mod that is more updated then the current GingerBread OS.
I managed to soft brick the device the rom clearly said e405 obviously the developer has a few bugs anyway I manage to recover from my soft brick by A software 'KDZ' Only issue I have now is when I press volume up on boot I get A notice icon trying to say something (image of the icon is attached below) and when I use ROM Manager to reboot to recovery it will attempt to go there, Instead of going to recovery it goes to A loading page then this erases all my data/apps except SuperUser/Root.
Tried everything and it still does it?
When I use the LG Emergency Software it just goes to a page saying not responding??
Any help and ideas would be grateful so I can fix this issue and move on also im mostly A samsung user and im fairly new to lg.
See thee error message below
Once i get the idea of what the icon is actually trying to say I should be in the right direction.
Thanks,
Spudster
Click to expand...
Click to collapse
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich

reply
kurtstraker said:
I saw that icon after flashing back to stock rom with KDZ and a hard reset worked for me. Pull the battery, make sure you not connected to USB or charger, then press and hold home key and down volume while you press power on. Release power when you see LG logo, hold the down and home for a while until you see android unpacking a box. It takes about a minute to see this, so you gotta wait for it. The phone reboots or shut downs, don't rememberwhich
Click to expand...
Click to collapse
Ok I will try that and let you know if it works in a few hours I gave the phone to my brother for free since I bought A samsung (used to samsungs and love then
Anyway should also mention that when I try to reboot into recovery with rom manager it reboots goes to the loading box thing then it wipes my data Like i said I tried that method in a few hours and get back to you here.

nope
didn't work ;.(

Man go to the screen u have posted the images above , then use KDZ to flash back Man!
This is "DIAG MODE" so select it in KDZ program
So select KDZ file ( download if u have tried urs so far)
No error .. when u click to start upgrade ur phone will apper in emergency mode. Then the KDZ will flash flawslessly
Sent From ... Lg e400 <-- {[Brasilian Here]}

Still didnt work it flash though but still didnt fix the recovery..
These lg are actually useless a simple firmware flash should do the job.
LG staff are also rude to be honest rang up and because I tried to root and I was doing the right thing going back to stock they denied support and hang up without me giving A reply. Glad ive switched back to samsung s4 and Apple IPhone 5C.
Thanks for attempting to help :.)

[Q] Hard bricked G2 after flash

Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!

darkflyer1983 said:
same here after flashing the wrong kernel, and tried with the good one using fastboot....
please help!
Click to expand...
Click to collapse
At least I'm not alone :laugh:
I found this thread but haven't tried yet. Don't know if the problem is similar.
I really hope the phone isn't dead, it's almost brand new

This is exactly what I have . The main problem is we can not see phone partitions. Always the alarm "can not access " or "format" !Waiting for some body to help restaure our LG G2.

3205
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.

Problem solved ...
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.

You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....

Is it actually in "Download Mode"?
GeneralMills777 said:
Are you still under warranty. If you can't get into download mode that means that LG won't be able to either. You could process a return directly from LG.
Click to expand...
Click to collapse
So, if my G2 shows "Download Mode" on the screen with the little white dots, but it's not recognized by Windows 7, Ubuntu, or Knoppix, and is for all intents and purposes, non-responsive, does anyone know if it's actually in "Download Mode"?

Eijo said:
Somehow I did manage to hard reset (vol - & power, wait for LG logo, release and then press vol - & power again) and then access recovery mode, so I did restore my backup (which had been renamed to ... 1970-05-01 ! lol) and my G2 is now back to life.
Weirdest thing ever... Kinda worried about flashing it again now !
Thing to remember : always have a backup file.
Click to expand...
Click to collapse
Peperepe said:
You are lucky man! I've done it but nothing after. I can access to hard reset but when I push power button the screen goes black as before ....
Click to expand...
Click to collapse
In my case, it just stuck on the same screen. Nothing moves.

honest1212 said:
In my case, it just stuck on the same screen. Nothing moves.
Click to expand...
Click to collapse
same problem here:
+ Download mode with some blue dot and nothing move, PC has no usb connection detected
+ Stuck on the LG logo screen with normal boot
+ NO recovery
+ it does FACTORY RESET but keep processing and nothing happen

Helped me, too.

Eijo said:
Hi everyone
I may have bricked my G2. I use to have a Samsung Galaxy S which I flashed many times so I kinda know when I mess up with instructions. This time though, things look a bit more serious... Anyway, here is what happened:
I flashed the Cloudy G3 rom (1.0) for my G2 D802 32gb. Original rom was stock rooted 4.4.
I followed the instructions :
- Backup rom
- All wipes
- Flash kitkat baseband
- Flash rom zip
- Get through the aroma installer steps
But then, when it asked to reboot, the phone just shut down.
Now it won't turn on. All I have is a quick look at the LG boot logo, and then the screen goes all black (blacklit is still on) again.
All I managed to do so far is maintaining the LG boot logo a bit longer on screen by alternatively pressing volume + or - at random times.
I can't access recovery or download mode anymore.
Plugging the phone will only show the LG boot logo and do all the same.
The phone is no longer recognized by my computer.
When I plug it, I get 13 new windows asking me to format the device and one I can explore.
Inside, there is one folder named "Image", filled with 51,4 Mb of files...
Quite confusing.
I don't know what to do, so any help to get the phone back to work will be appreciated
Thank you in advance.
Click to expand...
Click to collapse
hi dude , i had the same issue , and i lost my g2 cause of it , please dont mess with the partitions , to all of you please dont delete the partitions , just turn off your phone , press volume up and push usb cable you ll get into download mode , from there yo can go back to stock by the .tot flashing method or kdz but dont mess with partitions , i deleted partitions and my phone wad totally dead , no one could repair it

Something happened to me today...
Sent from my LG-D802 using XDA Free mobile app

[Q] Stuck on Bootscreen after flashing CWM (D802, 6.0.4.7)!

Hi there!
So I rooted my LG G2 (D802, 4.4.2, Stock, used ioroot) yesterday.
I intend(ed) to flash the Optimus G3 Rom, in the start post they recommended to flash cmw/twrp via "Simple Tool 3.2" (http://forum.xda-developers.com/showthread.php?t=2633941). After doing so (I used the automated version, not the manual one) I got STUCK ON THE BOOTSCREEN. There is a notification popping up for a few seconds in the left upper corner which lists several errors occurring:
BOOT CERTIFICATION VERIFY
SECURE BOOTING ERROR;
CAUSE: BOOTCERTIFICATION VERIFY
along with the following numbers listed from top to bottom: 710, 760, 810, 860, 910, 960 (I just noticed, the numbers can vary, but always follow the same pattern...)
after this message, the screen fades to black, I think it it is still running though, since it takes more than 10 seconds to reboot the phone by pressing the power button. I still have access to the button down/power button combo which leads to a factory reset setting, but it doesnt do anything for me since I still get stuck at the lg boot screen.
I
Atm I dont what to do! Enter download mode and flash something? I'm seriously kind lost here. So, thank you for your help!
Cheers

You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530

harkis123 said:
You flashed a custom recovery version thad doesin't match you phone ( example you flashed D801 recovery on D802 phone )
Just search in Q/A and you find the solution to fix it. Be calm , if you phone is booting - you can fix it
If you are lazy , i searched it for you. http://forum.xda-developers.com/showthread.php?t=2694530
Click to expand...
Click to collapse
Thanks a ton!! Finally I can put a name on the problem (bricking...)- Ironically I never mangaged to get there in 3years of samsung flashing but got there within 15mins of flashing on the LG G2. I guess it's true what they say about samsung devices, as hard to brick as a brick...
I'll report back if it worked...

Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...

thechillerdewd said:
Weeell, as it turns out my phone isn't recognized by my pc (Win 7) anymore...I literally can't do anything. Any hints?
I can use the Tool, but it's always trying to connect to my phone without success. But when I connect my phone to the computer it opens a dropbox window (import photos) and several windows partitions, which it tells me to format...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2687768

No acess to the recovery mode on Samsung

So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)

something similar happend to me..
rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?

HyperVenoms said:
same as yours but mine has logo displayed and i cant turn on or put in recovery mode can you please message me if you find a way to fix it?
Click to expand...
Click to collapse
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.

No but i found a solution
rxxern said:
Yeah, sure!
This might be stupid, but did you try use Odin? Since your logo appears, I think you're in a better condicion then me, lol.
Click to expand...
Click to collapse
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you

rxxern said:
So I have a Samsung Gran Prime Duos GM-530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
#https://docs.google.com/uc?id=0B7pEcClQW-2JenF1cW9jb05OVlk&export=download
thanks enjoy!!

No that lucky
HyperVenoms said:
ok so i couldnt put it into recovery mode or anything it was stuck so i took out the battery then held volume down power and home then pressed down to restart device and it came on successfully i hope this also works for you
Click to expand...
Click to collapse
So lucky! I can't do that to mine, when I put the battery out and try to do this, my phone has no response. ):

out of options
marwachacha said:
Try to download its stockrom boot it into download mode not recovery since recovery doesnt work any more i think its volume - if not + ,power button and Home button then dow load ODIN and flash the it so as to guarentee it to boot up again.
link for the devices stock rom
thanks enjoy!!
Click to expand...
Click to collapse
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.

rxxern said:
Thanks for the tip, but I really think I hard brick my phone, he just vibrate when the battery is on, when I try to turn him on just with the charger I get no response, my computer cannot ever reconize him. An since it's a national model there isn't much support for it on the internet (now I do regret getting him). I opened him to try force the reconization, but I don't find the force preloader mode test point and there is no way I can get a JTAG on Brazil.
TWRP Recovery Mode f*** me really hard this time.
Now if someone could help me finding the colo/kolo/whatever point on my phone I would really appreciated.
Click to expand...
Click to collapse
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.

marwachacha said:
Am not much sure if ti is hard bricked since you sayed that it vibrates lets look how much characteristics of a bricked device of which it posseses so as to conmfirm that it is hard bricked.
Soft Brick - Struck inBoot loop
2. Super Brick - Stuck atflashing Factoryfs.IMG in ODIN . Also called as EMMC Bug
3. Hard Brick -Dead / Costly Paper weights
4. Dead Brick - No chargingbattery sign also - Mostly = Hard Brick; But there is a window of possibilityby a USB JIG for SamsungPhones.
5. OTA Brick - Encountereddue to updating OTA on a rooted Stock ROM
6. CM12 Brick - when CM12encountered a /data write error. Worst is ODIN Flashing Fails
7. Pixel Salad: This is a problemof the graphics unit or the screen which fails to display correctly the imageand put instead random colored pixels on some areas of the screen or the wholescreen. It’s hard to even let the other members know what you are facing sinceyour screenshots would be just clean as it would have been. This also requiresa need for hardware checking if reflashing ROM doesn't work.
Soft brick means a temporary problem, which could be fixed. Soft brick usuallyoccurs after installing custom rom(s) or incorrect installation procedure whichinstallation/manipulation of files like permission settings, erasing systemfiles that is not compatible with each phone.
SOFT BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
Phone struck on OEM logo.
Phone struck on a ROM logo "bootanimation"
The phone does not simply power up
or any other you can add up
HARD BRICKED
PHYSICAL CHARACTERISTICS TO MENTION FEW ARE
· No signs that can turn on directly
· The Charging won't work.
· Phone not detected when connected to a PC
· The LED's do not light up immediately
· No Sound / Vibrate
· Your phone completely off (Paper Weight)
Simply put it cannot be repaired using SEUS, FLASHTOOL, ODIN or even PC COMPANION.
Click to expand...
Click to collapse
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.

hmmm
rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him

HyperVenoms said:
this may sound dumb but maybe your screen is broke i highly doubt it because of what happened but if you can feel the vibrations but not see the screen then maybe its the screen. There will probably be a way to fix it but im unsure. Its funny how you call your phone him
Click to expand...
Click to collapse
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).

rxxern said:
Even if it's not hard bricked I had no idea on how bring him into life again, since the only signal of life he gives me is the vibration with the battery on.
It could make my computer detect him it would be much easier.
Click to expand...
Click to collapse
rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
haha ok, i habe no idea what to do wiith your phone try searching other threads maybe ???

rxxern said:
I didn't mention this but the screen also blinks when is vibrating so... And if It was the screen the computer should reconized the phone, shouldn't?
Haha, english it's not my native language, so I get confuse sometimes, and i don't know calling it him sounds more right for me (?????).
Click to expand...
Click to collapse
also in advance try to change the usb cable which you are using to connect (him) with your computer as well as try different Pc's may Be yours might have some usb port drivers corrupted also try to install the ADB interface drivers in your pc so as you can enhance your Pc detect the devices even if they are powered off gues it will work still i have hope with your (him) buddy!!!

Nothing better than xda.

I am having the same problem with my G530BT. Managed to solve ?
rxxern said:
So I have a Samsung Galaxy Gran Prime Duos G530BT and I was installing the TWRP recovery mode on it, the app asked for restart the phone to test the recovery mode, but when I restarted it the phone didn't boot anymore. He just vibrate and nothing appers on the screen.
I can't even get acess to the recovery mode to fix it. Can someone help me?
(I try to use the flash tool since he doesn't boot, but the stock room don't have any scatterd file...)
Click to expand...
Click to collapse
I am having the same problem with my G530BT. Managed to solve ?

Raphaelfla said:
I am having the same problem with my G530BT. Managed to solve ?
Click to expand...
Click to collapse
Ow, one year latter I don't think this will help you anymore, but just in case someone has the same question: I didn't solve the problem, I took it to the Samsung assistence and discover that the motherboard was damaged, they would have to replace it.