Hi everyone,
My device was rooted, but supersu was having huge problems installing the binary, so I decided to go back to stock and try the process again.
I downloaded what was listed as my phone's ROM, and flashed it using Odin 3.09. It turns out it was a mislabelled ROM.
I finally got a hold of the correct ROM for my phone, however it always fails when I flash it, and displays this message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Problem is I can only seem to get into Odin mode. My screen reads this:
ODIN MODE
PRODUCT NAME: GTI9195
SYSTEM STATUS:CUSTOM
KNOX KERNAL LOCK: 0xffffffffc
KNOX WARRANTY VOID: 0xffffffffc
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 1
WRITE PROTECTION: ENABLE
Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUAMF6_I9195DTMAMF5_I9195XXUAMF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> tz.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> persist.img.ext4
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've looked around this forum, and others for a solution, but everything I have tried has failed.
If anyone has any suggestions, I would really appreciate them.
Go to the s4 mini forum.
You need to flash whit odin s4 mini pit file and then any rom what you like
1. This isn't Galaxy s4 Mini forum
2. You are trying to flash one i9505 ROM for ur MINI i9195... No way!! :silly:
naterial
Figured it out. Thanks for the suggestions, and yes, it was the wrong ROM.
my mobile is not booting stucking with "SAMSUNG LOGO"
Hi Guys,
I Bought S4 Mini (GT - I9195) in UAE
After that I Rooted my deivce through Odin V 3.09
Here comes the problem my mobile is not booting stucking with "SAMSUNG LOGO" even for 24 Hrs...
scorpionyuva said:
Hi Guys,
I Bought S4 Mini (GT - I9195) in UAE
After that I Rooted my deivce through Odin V 3.09
Here comes the problem my mobile is not booting stucking with "SAMSUNG LOGO" even for 24 Hrs...
Click to expand...
Click to collapse
This isnt S4 mini forum. Go HERE for more info
Don't know if this is the right place
I rooted my s4 mini and everything went fine, but when I installed custom recovery my speakers stopped working, lights stopped working, soft keys stopped working, charger stopped working. I don't know how to fix this. Please help.
HELP I HAVE THE S4 and have this isssue
Related
Hello,
-sorry for my english I dont speak well but...
phone: I9505
I was testing cyanogemod 10.1.3 for a while but then I decided get back to stock rom, did full wipe and put this ROM I9505XXUBMF8 into Odin and start flashing but he said this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OXABMF8_I9505XXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-then I couldnt go to system, recovery just to download mode so I flashed TWRP.
(I tried another stock rom, odin, PC but always same problem.)
-then i tried get back CM 10.1.3 via TWRP and it flashed and work without problem.
-then I tried flash omega rom via TWRP and it flashed without problem but booting is very slow and during the logo Samsung it takes about 10mins to boot into system and device is very hot.
-Everything about Kies and antivirus is off.
-Using just original USB cable.
-what says download mode:
ODIN MODE
PRODUCT NAME: gt-i9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0X0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLED
START [224, 1440]
SW REV, CHECK FAIL : FUSED : 2 , BINARY : 1
Any ideas how to resolve this?
Thank you
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
samersh72 said:
you have a secured bootloader, you can not flash old firmwares, flash MH8
use search button, there is a lot of threads talking about this issue
Click to expand...
Click to collapse
Thank you so much, I was looking for something all day but i didnt sure what Im really looking for
Today I tried updating my Samsung S4 i9505 from O2 4.2.2 to 4.3 BTU.
I used Odin and it failed miserably. The error I keep getting is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ7_I9505BTUEMJ8 _I9505XXUEMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> tz.mbn
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Now when I swtich the phone on I get the following message:
"Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Can anyone suggest how I can get this restored back. Everything I do seems to be failing.
Many Thanks
Also on Odin Mode this is what it says on the top left of screen:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KNOX KERNAL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
Different usb port and/or different usb cable.
Lennyz1988 said:
Different usb port and/or different usb cable.
Click to expand...
Click to collapse
Tried that and plugging into a different computer too. No joy.
I recently had the "Firmware upgrade encountered an issue ...." message after a messed up FW upgrade.
I couldn't do anything with the phone to fix it (different computers, cables, USB ports etc).
I eventually contacted Samsung, they advised me to visit my nearest "Geek Squad" service centre (located in some Car Phone Warehouse shops in the UK).
They reset the phone for £10 (or they'll do it for free if you wait 40 hours). Why 40 hours ? I don't know.
Kies, is F'ing useless. You won't fix it using that.
After the phone was fixed, I tried Kies again (to do the recovery as a test) and got a message saying my phone couldn't initialised or words to that effect.
Good luck.
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Do you know what firmware you had before flashing this one?
Did you try another firmware?
Also, is reactivation lock off?
Does the firmware u flash need a pit?
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
Also, is reactivation lock off?
Click to expand...
Click to collapse
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
jacek88zs said:
to be honest with you guys im quite amateur in phone things i just wanted get my phone back to stock rom , before i had this rom N9005_JACKYAWAY_NB7.1 even now when i m trying to instal this one from sd card it gets stuck on the screen " SMASUNG GALASY NOTE 3 ". i m not sure this rom requires pit file or not i have been trying flash rom without this pit file and with this pit file - effect is the same :
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
what does it mean ?
odin window :
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK (KK): OFF
KNOX KERNEL LOCK: OXO
KNOX WARRANTY VOID: 0X1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, R2, A3, P2
WRITE PROTECTIONl: ENABLE
UDC START
Click to expand...
Click to collapse
ok.
try this. Go to : http://forum.xda-developers.com/showthread.php?t=2643109
download the latest czech NC2. This one no need pit file.
Just put it under PDA/AP, no need to tick repartition. Then after your phone connected, click start.
Your reactivation lock is OFF already, so no need to worry about this.
Ok thank you, i will try do as you said mate and i will let you know about results as soon as its possible ! hopefuly it will works because i started be worried about i spent lot of money and lost the phone hehe
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Weird. Tat error is because the partition which need pit file.
Pardon me, if u don't mind, go to that thread again and download the firmware latest which need pit, download together with the pit, and flash again with repartition being ticked.
Sent from N7105, DN3 with AGNi kernel.
When Odin throws up that error, what does the download mode say?
It always appears when the odin is trying to flash the "system"
jacek88zs said:
It always appears when the odin is trying to flash the "system"
Click to expand...
Click to collapse
I meant, what error appears on the phone screen?
jacek88zs said:
Hi guys i bricked my galaxy note 3 - n9005 and nothing help i ve been trying flash it with odin ,in recovery mode by zip roms - by zip rooms it got stuck on samsung galaxy note 3 title and nothing happen , i want to get my phone back to the stock 4.4.2 rom pls help me nothing works in odin , i ve been trying with those pit files and nothing works :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Your phone is failing on flashing the hidden partition which usually contains the CSC info etc etc
Try downloading this rom or simply to go http://forum.xda-developers.com/showthread.php?t=2643572 or http://forum.xda-developers.com/showthread.php?t=2643109
And which one should i download now and try to flash ? before i have been trying to flash czech ... but still wasgot stuck on " system "
system.img.ext
FAIL! (Ext4)
Guys which one is with pit file and which one propably should get over this bug ?
jacek88zs said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
STILL same problem with this czech rom ;///
Click to expand...
Click to collapse
Also this isnt the stock C2 Rom if you check above it Says AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar.md5 is valid. try downloading a stock C2 rom from Sammobile or a mirror but make sure that you reset your phone through recovery once u successfly flash the rom.
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
jacek88zs said:
i just pastet wrong text from expired window of odin sorry ,the correct was with like screen shows without this " AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5 is valid. " i ve been trying to instal this czech one
Click to expand...
Click to collapse
Try Odin 3.09 . Sometimes older version is the issue.
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
jacek88zs said:
guys i have been tryin with different versions of odin ...same problem on every of them . Can someone tell me step by step what to do just apart of what to do in odin ,i know this ,which rom ,and what css files or whatever ? pls tell me in details how to do this , i propably have some korean version of phone ;/ its 16 gb note 3
Click to expand...
Click to collapse
What model does it show ??? remove the battery and look .
Sm-n9005 rf8f10pd75j
@jacek88zs : If urs is 16gb, I think u need a pit file. Urs is hongkong version I guess.
Take a look at this thread :
http://forum.xda-developers.com/showthread.php?t=2631628
Sent from N7105, DN3 with AGNi kernel.
Hello, I am trying to reset an Galaxy S4 I9500 to stock rom, but Odin fails to flash the main rom after flashing the recoveries etc.
The logs are:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNE4_I9500ODDFNE1_I9500DDUFNA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Previously the phone was on stock Chinese ROM, Android 4.4.2. I successfully flashed both Twrp and Cwm recoveries (Not simultaneously of course) but both failed to boot and the phone always just booted into the stock recovery. So I tried straight up flashing it back to stock.
I have tried both the Turkish and Indian Rom but both give the error that writing failed after system.img.
I have tried using different versions of ODIN, different USB cable, different USB port, re install drivers. Kies also refused to do a emergency recover after I entered the S/N, saying the S4 wasn't compatible. Now the phone says a firmware upgrade failed and it will only boot into download mode, no recovery. Download mode says:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
Is there any other solution to this? Might it be because the phone had a Chinese Rom I can only flash the Hong kong Firmware? Do I need to flash a pit file? Is there any other rom I can try to flash through ODIN? Quick help would be appreciated, I need to get the phone working by tomorrow midday.
Brambleclaw said:
Hello, I am trying to reset an Galaxy S4 I9500 to stock rom, but Odin fails to flash the main rom after flashing the recoveries etc.
The logs are:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUFNE4_I9500ODDFNE1_I9500DDUFNA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> param.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Previously the phone was on stock Chinese ROM, Android 4.4.2. I successfully flashed both Twrp and Cwm recoveries (Not simultaneously of course) but both failed to boot and the phone always just booted into the stock recovery. So I tried straight up flashing it back to stock.
I have tried both the Turkish and Indian Rom but both give the error that writing failed after system.img.
I have tried using different versions of ODIN, different USB cable, different USB port, re install drivers. Kies also refused to do a emergency recover after I entered the S/N, saying the S4 wasn't compatible. Now the phone says a firmware upgrade failed and it will only boot into download mode, no recovery. Download mode says:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
AP SWREV: A3
Is there any other solution to this? Might it be because the phone had a Chinese Rom I can only flash the Hong kong Firmware? Do I need to flash a pit file? Is there any other rom I can try to flash through ODIN? Quick help would be appreciated, I need to get the phone working by tomorrow midday.
Click to expand...
Click to collapse
This might be of help to you, see note 6.http://forum.xda-developers.com/show....php?=2265477
Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.
GoodMan14 said:
Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.
Click to expand...
Click to collapse
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477
MAX 404 said:
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
That's what he's doing. It should be working.
It MIGHT be because you have non official firmware on it now and it's not accepting the flash back to stock. IF that's the case the solution is to uncheck auto reboot in Odin and run the install sequence twice in a row. That's worth a shot here, but I don't think it's the solution.
Do you still have a working custom recovery? If so you should still be able to flash a custom ROM. I might try flashing a custom TouchWiz rom then starting over.
Still fail !
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
GoodMan14 said:
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Hi ,
This is from the post i gave you earlier
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Check and see if it helps , did you try what Skipjacks said?
i di all
Hi, in this morning i tried again and passed.. finally
Thanks for helping.
GoodMan14 said:
Hi, in this morning i tried again and passed.. finally
Thanks for helping.
Click to expand...
Click to collapse
Great news mate
Sent from my Nexus 7 using XDA Premium 4 mobile app
Try flash stock firmware using odin