Database Users

New ICS ROM: N7000zslpf_n7000ozslpf_ozs

Did anyone had a chance to review or it is too early?

As mentioned above:
There seems to be a different leak, N7000ZSLPF_N7000OZSLPF_OZS (Android 4.0.3) Taiwan locale. http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=2#regiona
Sam mobile say it is a full wipe rom .

Interesting to see what kernel version it uses
Sent from my iPad using Tapatalk

nandihno said:
Interesting to see what kernel version it uses
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Would be nice if it used a 'safe' kernel....

Downloading now, will probably flash to try, maybe minus the bootloader to start.

downloading, too.
Please report back how it was after flashing. I really want the Traditional Chinese CSC to be honest.

Just checked. This is in fact a Hong Kong firmware.
CSC codes are TGY and BRI.
Have not flashed yet though

hkgrob said:
Just checked. This is in fact a Hong Kong firmware.
CSC codes are TGY and BRI.
Have not flashed yet though
Click to expand...
Click to collapse
Looks like it has some sort of new bootloaders bundled to it as well.
I'm too afraid to flash now after my first note was bricked by the LP series.

sutekidane said:
Looks like it has some sort of new bootloaders bundled to it as well.
I'm too afraid to flash now after my first note was bricked by the LP series.
Click to expand...
Click to collapse
I'd also steer clear of anything with bootloaders.

Calling for the brave people who would test this new rom. We want to check if this rom will be SAFE considering it has a new bootloader.

is it possible that the bootloader plays into all our bricking issues?

xelir13 said:
Calling for the brave people who would test this new rom. We want to check if this rom will be SAFE considering it has a new bootloader.
Click to expand...
Click to collapse
I will answer the call! (I've had a good run so far with ICS) Flashed with a repartition, booted up fine. *2767*3855#, wiped, all good again. Will post an update or two once I continue my usual setup.
EDIT:
Kernel Version
3.0.15-N7000ZSLPF-CL558430
[email protected] #3
SMP PREEMPT Tue May 15 15:49:39 KST 2012
EDIT EDIT:
Sorry folks, can't see any sign of the Premium Pack =/
EDIT EDIT EDIT:
Well, so far so good. Seems a little smoother then LPY, not a single crash or reboot. Looking good. Of course, only time will tell, YMMV etc etc But I would say go for it unless one of the devs says otherwise

tabsterleir said:
I will answer the call! (I've had a good run so far with ICS) Flashed with a repartition, booted up fine. *2767*3855#, wiped, all good again. Will post an update or two once I continue my usual setup.
Click to expand...
Click to collapse
+1

hopefully the brick-bug was solved...

So no premium pack?
What's the size of the update please..

Did you flash through mobile odin? Ever root?
Sent from my GT-N7000 using XDA Premium App

Wasnt most bricks user error?
Sent from my GT-N7000 using xda premium

Koguchi9 said:
So no premium pack?
What's the size of the update please..
Click to expand...
Click to collapse
No premium pack that I can see sorry, maybe a dev could do some digging and unearth something. 648mb zipped, 991mb extracted.
Nayfuslis said:
Did you flash through mobile odin? Ever root?
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Odin PC with repartition set, I haven't rooted my Note as of yet, sorry (Probably don't plan to either)

Can you provide the screenshot of which to selected for which file?

I just flashed with Mobile Odin Pro (from Chrack 18). Injected Everroot, SuperSU and Odin Mobile.
No problem.
Installation was fast. Just connecting to Market. Will add more infos later.

New 1.29.1540.16 Update For US Developer Edition...

Guys, just checked and there is an update to 1.29.1540.16. I am installing now. Hopefully it has the cameras fixes.
Y2J

Well no new camera, but they did fix the home and back button sensitivity. They work consistently as they should now.

y2jdmbfan said:
Well no new camera, but they did fix the home and back button sensitivity. They work consistently as they should now.
Click to expand...
Click to collapse
i can confirm this from 1.29.401.16R leak
question, did you get a list of changes when the OTA pop appear? or just "system enhancements" ?

y2jdmbfan said:
Well no new camera, but they did fix the home and back button sensitivity. They work consistently as they should now.
Click to expand...
Click to collapse
Could you post a TWRP nandroid of boot/system/data(preload only) thanks.

Custom recovery update?
I have the Team Win's recovery flashed on my Dev Edition. When I try to update, TWRP starts and no update happens.
How should the OTA updates be addressed with custom recoveries?

No updates yet for international version. I am still using 1.29.707.16 Hopefully we get the new updates soon.
Sent from my HTC One using xda app-developers app

I am on AT&T edition running a dev edition ROM. It is showing the update for me but I am on CWM recovery. I'm assuming all we need is stock recovery for it to work right?
Sent from my HTC One using xda premium

y2jdmbfan said:
Guys, just checked and there is an update to 1.29.1540.16. I am installing now. Hopefully it has the cameras fixes.
Y2J
Click to expand...
Click to collapse
I hope many people might be getting OTA updates on their one 64 GB developer edition .. Any more guys wanna comment who have recieved it ?

Just got this on my US 32GB Unlocked! Glad the US Unlocked and Dev Edition are getting prompt updates.

alanchai said:
No updates yet for international version. I am still using 1.29.707.16 Hopefully we get the new updates soon.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
You already have the new version, .16 is the version.

y2jdmbfan said:
You already have the new version, .16 is the version.
Click to expand...
Click to collapse
x2.
The number at the end is the build version. .16 is definitely the latest one.

hamdir said:
i can confirm this from 1.29.401.16R leak
question, did you get a list of changes when the OTA pop appear? or just "system enhancements" ?
Click to expand...
Click to collapse
Just said system enhancements. We came from 1.29.1540.3, not 1.26 or 1.28, so probably not much changed for us. I didn't have any issues with my back and home buttons before the update so not sure about that. The update was about 17 MB.

y2jdmbfan said:
Well no new camera, but they did fix the home and back button sensitivity. They work consistently as they should now.
Click to expand...
Click to collapse
Did you check ur camera app version cause .16 is the latest and should have camera...what is ur camera version?
.

mrcobain said:
I have the Team Win's recovery flashed on my Dev Edition. When I try to update, TWRP starts and no update happens.
How should the OTA updates be addressed with custom recoveries?
Click to expand...
Click to collapse
You need stock recovery for OTAs, otherwise wait for someone to release a zip unless you know how to make one yourself.

PcFish said:
You need stock recovery for OTAs, otherwise wait for someone to release a zip unless you know how to make one yourself.
Click to expand...
Click to collapse
today i got a new update 1.29.401.17 (HTC ONE 801e)

mrcobain said:
I have the Team Win's recovery flashed on my Dev Edition. When I try to update, TWRP starts and no update happens.
How should the OTA updates be addressed with custom recoveries?
Click to expand...
Click to collapse
Same issue here.
Sent from my HTC One Developer Edition using Tapatalk 2

Nice! Just got the update notice too (on a US developer edition). Using CWM right now, so have to get back to stock recovery right?
Could anyone confirm this will do the job?
unzip PN07IMG_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.3.zip
fastboot flash recovery recovery_signed.img
Please confirm. Thanks!
EDIT: Just tried it and it hangs at "Entering recovery". How is one supposed to flash the stock recovery?
EDIT 2: Ok, I had to use the "ruuveal" tool on the RUU zip file, then unzip the result and install the original recovery with fastboot. It worked

Have the 32gb unlocked version and installed the update. 17.5 MB.
Smooth like butter.

Downloaded, said couldn't update. I am on a custom kernel and have cwm, also I am technically on an AT&T phone even though I'm on DE ROM.
Sent from my HTC One using xda premium

as long as you are stock or rooted on stock rom with stock recovery, you will be updated.

new baseband

is there any way to get the new baseband without taking the new update? i have seen a few poeple asking for it in threads but no one has uploaded it.

pbanj said:
is there any way to get the new baseband without taking the new update? i have seen a few poeple asking for it in threads but no one has uploaded it.
Click to expand...
Click to collapse
I Kanged this from a famous Dev's former version.
http://www.mediafire.com/download/06j4ygdmdhxlm22/xt907-98.18.78p-radio.zip.
Works. Backup!!!!!!!!!!
I think it will UG you but not fix radio if it is broken.

aviwdoowks said:
I Kanged this a famous Dev's former version.
http://www.mediafire.com/download/06j4ygdmdhxlm22/xt907-98.18.78p-radio.zip.
Works. Backup!!!!!!!!!!
I think it will UG you but not fix radio if it is broken.
Click to expand...
Click to collapse
thank you, i was just going to use it to update my radio. does this new one work better then the old?

Pardon the interruption, but are you all talking about something that assists in better reception? If not, ignore the dumb question.
Sent from my Amazon Kindle Fire using xda app-developers app

I am on the whole UD not the old + the new radio. Back up and try it. It is here just for old roms to get better reception OR crash.

aviwdoowks said:
I am on the whole UD not the old + the new radio. Back up and try it. It is here just for old roms to get better reception OR crash.
Click to expand...
Click to collapse
I unlocked my bootloader. Installed TWRP. Backed up root with Voodoo. Forgot to unfreeze bloatware. Took the recent OTA and had partial success as I was upgraded except for the new radio. I installed .78p from the above link and it works fine.

aviwdoowks said:
I Kanged this a famous Dev's former version.
http://www.mediafire.com/download/06j4ygdmdhxlm22/xt907-98.18.78p-radio.zip.
Works. Backup!!!!!!!!!!
I think it will UG you but not fix radio if it is broken.
Click to expand...
Click to collapse
I am on the newest update, bootloader still unlocked, running TWRP, and rooted; would I just flash this in TWRP and that would work? Thanks.

dtraini7 said:
I am on the newest update, bootloader still unlocked, running TWRP, and rooted; would I just flash this in TWRP and that would work? Thanks.
Click to expand...
Click to collapse
If you are using twrp you ARE unlocked. Yes.

Exactly what baseband is this? I don't see a name anywhere. Have there been any improvements compared to the latest one?
Sent from my XT907 using xda premium

b0uncyfr0 said:
Exactly what baseband is this? I don't see a name anywhere. Have there been any improvements compared to the latest one?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
The modem version is in the name ...78p. The newest.

Will this work with say...CM10.1 Leak installed?
[Edit]
Just did it anyways and it does in fact work. Verified in setting and I'm running baseband version: SM_BP_101032.020.32.78P
Thanks for this!

Syphen5 said:
Will this work with say...CM10.1 Leak installed?
[Edit]
Just did it anyways and it does in fact work. Verified in setting and I'm running baseband version: SM_BP_101032.020.32.78P
Thanks for this!
Click to expand...
Click to collapse
Did you flash the zip in recovery ? Notice any improvements ? The OP is rather confusing....
Sent from my Nexus 7 using xda premium

I can tell that my WiFi is a lot stronger after I flashed the radio file
Sent from my XT907 using xda app-developers app

JPHoller said:
Did you flash the zip in recovery ? Notice any improvements ? The OP is rather confusing....
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I am the op.:fingers-crossed:

aviwdoowks said:
I am the op.:fingers-crossed:
Click to expand...
Click to collapse
Thank you for posting the zip, but am unsure what you mean by fingers crossed.
Sent from my Droid Razr M using xda premium

JPHoller said:
Thank you for posting the zip, but am unsure what you mean by fingers crossed.
Sent from my Droid Razr M using xda premium
Click to expand...
Click to collapse
Nothing . Poor eyesight was a Smiley.
Much better wifi!

JPHoller said:
Did you flash the zip in recovery ? Notice any improvements ? The OP is rather confusing....
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
whats confusing about the op?

dtraini7 said:
I am on the newest update, bootloader still unlocked, running TWRP, and rooted; would I just flash this in TWRP and that would work? Thanks.
Click to expand...
Click to collapse
Just the part about "managed a famous devs former version" I figures it out though. Thanks to the OP for posting!!
Sent from my Droid Razr M using xda premium

Does anyone know if this baseband helps Bluetooth at all, or would I need the whole upgrade for that? The release info-graphic Motorola put out says the update improves Bluetooth connectivity, so I am just curious. My Voyager Legend disconnects mid call when wifi is on sometimes.
Thanks!

well i kept putting off installing the new radio as i knew it was going to re-lock it and i would have to do the sim unlock again(not hard do to i just didn't want to swap hard drives). with that being said i installed this Friday night and to my surprise it didn't re-lock the radio. i was shocked as it should have re-locked it but did not so i would say if u are using the sim unlock and want the new radio this is prob the better way to get it over the ota. wifi seems to be performing a little better it only dropped the signal once in my bedroom last night instead of every 5 min like it was doing(yes i know its the phone every other device i have tested doesn't do it). cell signal seems to be about the same, but i am using a net10 att sim so the signal may be better on vzw's towers. i have not tested bluetooth yet as i only have one thing that uses it and that is my moga controller. i am on the 7-30 build of aokp if you wanted to know that.

Koodo rolled out ota update

Just checked update
Sent from my XT1032 using xda app-developers app

Finally
Sent from my XT1032 using xda app-developers app

safe to update?
Anyone know if it is safe to update over rooted 4.3 ?

goul0080 said:
Anyone know if it is safe to update over rooted 4.3 ?
Click to expand...
Click to collapse
this update came out one week ago. if you are on stock ROM, you can update it. otherwise you need to restore to stock ROM to update and then root and install customized recovery. these process can keep your user apps and data.

Can't upgrade here...tried 3 times, download is ok, installation starts....and stops at around 20% with a droid error.
Phone unlocked but not root. Location Montreal, provider Bell...
Any idea someone?

NoUseToRush said:
Can't upgrade here...tried 3 times, download is ok, installation starts....and stops at around 20% with a droid error.
Phone unlocked but not root. Location Montreal, provider Bell...
Any idea someone?
Click to expand...
Click to collapse
sideload.

netyang said:
sideload.
Click to expand...
Click to collapse
Thanks, I tried!
As mentionned in http://forum.xda-developers.com/showthread.php?t=2608894
I copied the Telus rom to where I believe is the root of my SD card, overwriting an "invisible " identical rom already there. Reboot, nothing happens, went to settings/system upgrade...and it offers me to redownload the rom
What am I doing wrong?

[OTA Captured] German Retail 4.4.4

OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Download:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.

Were you on stock recovery but rooted when you got this OTA?

I got this Update today too.

BaghiXDA said:
Were you on stock recovery but rooted when you got this OTA?
Click to expand...
Click to collapse
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.

Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?

I'm also getting the update in The Netherlands. Bought my phone online amazon.de :laugh:

patient81 said:
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
Click to expand...
Click to collapse
Here you go. Obviously remove the .txt extension.

Bec de Xorbin said:
Here you go. Obviously remove the .txt extension.
Click to expand...
Click to collapse
Thank you kindly.

drfr said:
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Currently uploading it ....
Here we go:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Click to expand...
Click to collapse
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!

NextGenGTR said:
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
Click to expand...
Click to collapse
Well, I can, but can you tell me why are you asking?

I'm rooted and installed the stock recovery then tried doing the Ota (I'm on stock rom if it matters) and it gives an error, just "error" no more information during the installation process.
Anybody can help?
Sent from my XT1032 using XDA Free mobile app

./.

bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Yes, you have the right version of firmware for this OTA, don´t know why it´s failing for you, there´s too much variables, it´s hard to tell.
As to where the file I posted comes from - it´s right from my phone. Until today morning I was on French 4.4.4, then I flashed the German 4.4.2 firmware to look if I could catch the OTA and it really came, I pulled it from my /cache and posted here. Check out the MD5 sum: d289331e52d0f79d2bcc4b9b390ff338
It´s the same on my local copy, on the cloud copy I posted and also look here:
http://www.android-hilfe.de/7843052-post301.html

drfr said:
Well, I can, but can you tell me why are you asking?
Click to expand...
Click to collapse
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.

NextGenGTR said:
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
Click to expand...
Click to collapse
I see, so mine is 3549.

I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app

drfr said:
I see, so mine is 3549.
Click to expand...
Click to collapse
loungedogg said:
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...

NextGenGTR said:
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
Click to expand...
Click to collapse
Why so sceptical? Apart from a different dialer GUI, there´s not much difference you can really feel on 4.4.4, basically there are just some bug fixes.

bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
my phone:
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Perhaps you need to uninstall and remove the modules and the xposed from the system before updating. Xposed and the modules add / modify system files and other sources in the device. Make sure you unroot as the last step as well. Stock recovery is required to install the OTA successfully

drfr said:
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Click to expand...
Click to collapse
I just wanted to know, did you also had stock recovery or custom?