Related
FYI Folks, I just did a system update check and there was one available...downloading it now.
Hope you all are as lucky!
If it is 1.86 then it has been out for a while.
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
No, it was 4.1.83.en.US
Do I need to unroot for it to install?
I am assuming your rooted? and deox? i would say you would have to revert to same procedure when 1.5.7 came out. Ie: restore bloatware/deox files
It downloads and reboots phone, it than starts extracting file and thats where it craps out.
K, looking at how to de-ox, new to android..only had this for 2 days.
Thanks for nothing liar. I have no update in NY. Also not to be a ****, but this should be in general unless your posting the sbf
Sent from my MB860 using XDA Premium App
Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.
jank0023 said:
Not lying...and if I knew how to do that I would...I was running stock rom, rooted and I had manually uninstalled some of the bloatware.
Anyone got a quick link to how I deox this?? no biggie ill look around.
Click to expand...
Click to collapse
I can say you aren't lying cause I am getting the message too. It says it is 1.83 but the weird thing is is that I am on the bell atrix but I used Seven's method to install GingerBlur so it says I am on att but I am actually on 1.4.2
Sent from my MB860 using XDA App
Update is available OTA in Portland, OR this morning. 3 people in my office have the Atrix and we all had the update available this morning.
They are probably going in batches guys just be patient it is rolling out in Dallas, TX i've been checking every day just got mine this morning takes about 15 minutes total and your on 2.2.2 and HSPA
Sent from my MB860 using XDA Premium App
jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
If your new to android why would you not like the rest of us READ the fourms before 1. Posting in the wrong section 2. Ask a question that can be answered by doing a little research 3. Root without knowing how to revert back. We are all here to help as long as your not a donkey!!!!!
The chat support told me this:
The software version 4.1.83 is already being rolled out. It will be released by batches to all AT&T and Motorola Atrix.
Click to expand...
Click to collapse
I got it now..
Im on Rooted&Sideloading @ Stock 4.1.5.7 .
What do i need to do now?
System update is a go in Maui!
Sent from my MB860 using XDA App
Just got it in Orlando, FL
Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App
Ratchet556 said:
Wait so I'm going to go ahead and assume this wont work for the bell atrix. It says at&t in the message. Is it an international update?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
No... this is not a Bell update.
Well for some reason it is updating without me doing anything.
Sent from my MB860 using XDA App
I got the update this morning for 1.83 here in NYC
jank0023 said:
Ok, now I'm panicking...it downloaded the firmware, asked me to install...I clicked yes and now I have a fuggin Triangle with an ! plus the android bot...WTF
Click to expand...
Click to collapse
I was getting the same error, I think it was because I tweaked my build.prop . I restored my build.prop from a back up version and now the update is going through.
only things I modified were build.prop, sideloading, root. I'm able to update without restoring to a previous stock image.
Update to us version (I have US Global GSM 8GB XT1032)
https://www.dropbox.com/s/xrcy2c26xbmqo85/Blur_Version.172.44.4.falcon_umts.Retail.en.US.zip
samijam said:
Update to us version (I have US Global GSM 8GB XT1032)
https://www.dropbox.com/s/xrcy2c26xbmqo85/Blur_Version.172.44.4.falcon_umts.Retail.en.US.zip
Click to expand...
Click to collapse
Well done. You may want to consider renaming the thread to something more specific - include version, date etc., because "new" tells nothing.
Looking into the zip I can see modem patches - presumably it´ll be the same radio upgrade like we got for DE version, also OTG USB storage fix and probably something more, because the zip is 2,5MB bigger than the German one. Maybe later I´ll flash US firmware and apply this OTA to check it.
drfr said:
Well done. You may want to consider renaming the thread to something more specific - include version, date etc., because "new" tells nothing.
Looking into the zip I can see modem patches - presumably it´ll be the same radio upgrade like we got for DE version, also OTG USB storage fix and probably something more, because the zip is 2,5MB bigger than the German one. Maybe later I´ll flash US firmware and apply this OTA to check it.
Click to expand...
Click to collapse
sorry, I was doing multiple things and meant to put in the version number, It's updated now. Also, here is the link to the release notes:
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/98312/action/auth
samijam said:
sorry, I was doing multiple things and meant to put in the version number, It's updated now. Also, here is the link to the release notes:
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/98312/action/auth
Click to expand...
Click to collapse
Identical to German OTA. Thank you.
Hi
I have xt1032 us global on 172.44.4
Can I flash this ?
If yes please kindly tell how do I do it.
I'm stock bootloader locked unrooted
Thanks a lot
Sent from my XT1032 using xda app-developers app
iluvatrix said:
Hi
I have xt1032 us global on 172.44.4
Can I flash this ?
If yes please kindly tell how do I do it.
I'm stock bootloader locked unrooted
Thanks a lot
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
Copy zip to your sdcard and go to recovery, probably you will have to hold volume up and power together for some 3 secs to get in. Then apply update from sdcard.
Sent from my XT1032 using XDA Premium 4 mobile app
Sorry forgot to add mine is 16 GB
Can I flash this ota that came from an 8 GB?
Thanks a lot
Sent from my XT1032 using xda app-developers app
iluvatrix said:
Sorry forgot to add mine is 16 GB
Can I flash this ota that came from an 8 GB?
Thanks a lot
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
I have 16 gb version and there is no problem with updating via stock recovery
iluvatrix said:
Sorry forgot to add mine is 16 GB
Can I flash this ota that came from an 8 GB?
Thanks a lot
Sent from my XT1032 using xda app-developers app
Click to expand...
Click to collapse
Storage size makes no difference.
Sent from my XT1032 using XDA Premium 4 mobile app
Thanks both of you kind sirs for patiently helping a noob.
I followed your guide & its updated in less than 5 mins
Thanks
Sent from my XT1032 using xda app-developers app
When i try to update show an error:" This package is for "falcom_umts" devices; this is a "xt1034"", the funny thing is i have a xt1032 device
deleted
Can I flash this over on CWM recovery?
Sent from my Motorola Moto G
S0bes said:
I have 16 gb version and there is no problem with updating via stock recovery
Click to expand...
Click to collapse
I pulled this update but haven't applied it. I have your languages mod installed along with custom font and logo.bin. Would there be any problem flashing this update?
Also, I have custom recovery (TWRP), so would I have to switch back to stock recovery? (And where is it available?)
samijam said:
I pulled this update but haven't applied it. I have your languages mod installed along with custom font and logo.bin. Would there be any problem flashing this update?
Also, I have custom recovery (TWRP), so would I have to switch back to stock recovery? (And where is it available?)
Click to expand...
Click to collapse
Yes, you have to restore your decice to clear 4.4 before applying this ota. Because if you try it to install you'll have bootloop
And with this "minor" update my led starts blinking on missing calls
S0bes said:
Yes, you have to restore your decice to clear 4.4 before applying this ota. Because if you try it to install you'll have bootloop
And with this "minor" update my led starts blinking on missing calls
Click to expand...
Click to collapse
And then after installing this, there would be no problem to reinstall your languages mod with the same file as before?
samijam said:
And then after installing this, there would be no problem to reinstall your languages mod with the same file as before?
Click to expand...
Click to collapse
Unfortunately there is will be a problem
Some errors which do not allow use your phone
why you got a H+ icon and I got only 3G.
tonyleeloveyou said:
why you got a H+ icon and I got only 3G.
Click to expand...
Click to collapse
The original poster is not using stock.
tonyleeloveyou said:
why you got a H+ icon and I got only 3G.
Click to expand...
Click to collapse
I have stock ROM, but I flashed S0be's languages mod and this also included the H,H+ icons.
Warning: if you look a few posts up, he says this mod has problems with this update. For now, I'm not going to apply the update. In fact, I might be flashing Cyanogenmod soon.
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Download:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Were you on stock recovery but rooted when you got this OTA?
I got this Update today too.
BaghiXDA said:
Were you on stock recovery but rooted when you got this OTA?
Click to expand...
Click to collapse
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
I'm also getting the update in The Netherlands. Bought my phone online amazon.de :laugh:
patient81 said:
Also got the update but the installation is failing due to unexpected changes to build.prop. I have removed xposed and anything else I can think of that may have changed the system partition but still no go.
Any ideas? Maybe someone could post their build.prop?
Click to expand...
Click to collapse
Here you go. Obviously remove the .txt extension.
Bec de Xorbin said:
Here you go. Obviously remove the .txt extension.
Click to expand...
Click to collapse
Thank you kindly.
drfr said:
OTA for German Retail version from 4.4.2 to 4.4.4 started to roll out finally.
Currently uploading it ....
Here we go:
http://d-h.st/gUF
The name of the file is Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip - as always - it is named after the firmware being updated not after the target one.
Click to expand...
Click to collapse
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
NextGenGTR said:
Can you go to About Phone > Status and tell me what your first 4 numbers of your Imei is? Thanks!
Click to expand...
Click to collapse
Well, I can, but can you tell me why are you asking?
I'm rooted and installed the stock recovery then tried doing the Ota (I'm on stock rom if it matters) and it gives an error, just "error" no more information during the installation process.
Anybody can help?
Sent from my XT1032 using XDA Free mobile app
./.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Yes, you have the right version of firmware for this OTA, don´t know why it´s failing for you, there´s too much variables, it´s hard to tell.
As to where the file I posted comes from - it´s right from my phone. Until today morning I was on French 4.4.4, then I flashed the German 4.4.2 firmware to look if I could catch the OTA and it really came, I pulled it from my /cache and posted here. Check out the MD5 sum: d289331e52d0f79d2bcc4b9b390ff338
It´s the same on my local copy, on the cloud copy I posted and also look here:
http://www.android-hilfe.de/7843052-post301.html
drfr said:
Well, I can, but can you tell me why are you asking?
Click to expand...
Click to collapse
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
NextGenGTR said:
Apparently the update rolls out depending on that 4 numbers, i think it started from something like 3550 and mine is 3593 so i wanted to see if it is close to my number if you get what i mean.
Click to expand...
Click to collapse
I see, so mine is 3549.
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
drfr said:
I see, so mine is 3549.
Click to expand...
Click to collapse
loungedogg said:
I have 3549 ....en.GB ,no update
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
NextGenGTR said:
I am from the UK too, i still dont have any sign of update for 4.4.2, i hope i'm not waiting for a update that is going to make the phone worse...
Click to expand...
Click to collapse
Why so sceptical? Apart from a different dialer GUI, there´s not much difference you can really feel on 4.4.4, basically there are just some bug fixes.
bad1080 said:
hi, i have an error with the ota update to 4.4.4 myself, my phone is unlocked and rooted (mostly for xframework, xprivacy and gravity box). now i would like to know if i can use the version you have posted?
my phone:
do i need to reinstall anything after the update? also i would like to know where that version you posted is coming from (is it clean)?
thanks in advance!
Click to expand...
Click to collapse
Perhaps you need to uninstall and remove the modules and the xposed from the system before updating. Xposed and the modules add / modify system files and other sources in the device. Make sure you unroot as the last step as well. Stock recovery is required to install the OTA successfully
drfr said:
You can always GET an OTA but you won´t be able to install it in some scenarios.
Your system partition has to be mostly untouched, but root and Xposed Framework won´t cause any problem. You can use stock or Philz Recovery.
Click to expand...
Click to collapse
I just wanted to know, did you also had stock recovery or custom?
hi - returned to stock this morning and the 2.10.61.6 OTA came through.
updating now......
how did you manage
Hi been trying to get mine back to stock I thought I had but can`t get the OTA update it was there before can you help in any way thanks
wherez my car said:
Hi been trying to get mine back to stock I thought I had but can`t get the OTA update it was there before can you help in any way thanks
Click to expand...
Click to collapse
perhaps you could outline exactly what you have been doing?
Unlocked bootloader rooted installed twrp now unrooted as had its update but wouldn't install downloaded stock rom and boot img installed great but now can't find ota update thought about rooting again but then I have to use sunshine to unlock my cid just wish I ain't messed around with it....
wherez my car said:
Unlocked bootloader rooted installed twrp now unrooted as had its update but wouldn't install downloaded stock rom and boot img installed great but now can't find ota update thought about rooting again but then I have to use sunshine to unlock my cid just wish I ain't messed around with it....
Click to expand...
Click to collapse
Not too sure where you are but i would suggest going back to stock again as you need this even to manually install an OTA.
For me i downloaded this file;
http://androidruu.com/getdownload.p...61_56.02.50306G_2_F_release_426728_signed.zip
Renamed the file 0PJAIMG.zip and put it on the external SD card. The card should be formatted FAT32 and nothing apart from the zip should be on there. When you reboot into download mode, you will be prompted to flash the zip.
This will wipe your data, so backup what you need
Once you get back to stock the OTA should start
would the zip let you open it? ......Thanks will give it ago will message back if its worked or not cheers
You don't really need to open it.
Just rename as indicated and copy it to the external SD card etc.
Sent from my HTC One M9 using Tapatalk
I don't believe they actually got an update out in a timely manner. Just days after I pay to get S-OFF and flash an unbranded rom as well!
Sent from my HTC One M9 using Tapatalk
I feel your pain. I almost went s-off yesterday and stumbled across a twitter post about Wi-Fi calling being enabled on the M9 with the OTA so I decided to return to stock this morning and boom.....
But I agree with you EE is not very fast with updates and does not keep users informed
Sent from my HTC One M9 using Tapatalk
AirwolfUK said:
I feel your pain. I almost went s-off yesterday and stumbled across a twitter post about Wi-Fi calling being enabled on the M9 with the OTA so I decided to return to stock this morning and boom.....
But I agree with you EE is not very fast with updates and does not keep users informed
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I don't think I've ever stopped on a T-Mobile/EE rom for longer than a week. They're normally well behind even the other UK networks with updates.
I'll stay on 2.10.401.1 anyway. I doubt EE will be this fast with any future minor updates.
Sent from my HTC One M9 using Tapatalk
excellent thanks for the help it worked i was naming the file wrong to start with but all good now cheers
My system backup has become corrupt so could someone upload the stock backup or RRU for EE UK 2.10.x so i can return to stock?
thanks
Can someone upload the firmware please
Anyone?
Its been a while so thought I would ask again if anyone has a backup or RUU for 2.10.61.6 Orange/ EE UK?
Thanks
Sent from my HTC One M9 using Tapatalk
Could someone advise... can I go back to 1.32 .x from 2.10.x ?
Sent from my SM-T530NU using Tapatalk
AirwolfUK said:
Could someone advise... can I go back to 1.32 .x from 2.10.x ?
Sent from my SM-T530NU using Tapatalk
Click to expand...
Click to collapse
If you are s-off....g
I guess there is a new update certified on PTCRB. I guess it's today.
It's surely a bug fix since it's only .236 from .216 changed.
Vengeance66 said:
I guess there is a new update certified on PTCRB. I guess it's today.
It's surely a bug fix since it's only .236 from .216 changed.
Click to expand...
Click to collapse
Which phone of Sony is best seller???
Sent from my Xperia Z1 C6903
Depends on your country
Sent from my C6903 using XDA Free mobile app
just bug fix or we'll have something new this time??
protick26 said:
just bug fix or we'll have something new this time??
Click to expand...
Click to collapse
I don't even know yet what had been new on .216 firmware.
Just iinstalled the update, but so far no big changes in sight
ra9na said:
Just iinstalled the update, but so far no big changes in sight
Click to expand...
Click to collapse
Got the notification also. 10.8 MB if anybody is interested in file size.
you can find here the ftf and pre-rooted file http://forum.xda-developers.com/xperia-z1/general/sony-xperia-z1-5-1-1-build-14-6-1-236-t3263466
For those who have updated via OTA, did you loose root after update?
Sent from my C6902 using XDA Premium 4 mobile app
Guys who installed it - have you noticed anything new/fixed? Or is there any official changelog?
I've noticed a better wifi range signal.
I can't update my phone to 14.6.A.1.236 version firmware for C6802.
My phone is Rooted So.
Please Help me...
kumardheeraj119 said:
I can't update my phone to 14.6.A.1.236 version firmware for C6802.
My phone is Rooted So.
Please Help me...
Click to expand...
Click to collapse
What message did you get?
Sent from my C6902 using XDA Premium 4 mobile app
system could not verify. help me
I have this problem too, my phone is rooted by king root. Update size is 145mb but when i want install it after download, it says "could not verify"
Another
gardilim said:
I have this problem too, my phone is rooted by king root. Update size is 145mb but when i want install it after download, it says "could not verify"
Another
Click to expand...
Click to collapse
Guys,
Check out my guide here:
http://forum.xda-developers.com/xperia-zr/general/rooted-ota-update-failed-10-10-5-1-0-292-t2948116
You need to find what is the modified system files that cause the setup to fail. Most like Kingsoft changes the root settings in the config.
Just removed root and install was succes.
gardilim said:
Just removed root and install was succes.
Click to expand...
Click to collapse
I unrooted my phone from supersu but still cannot verify. Which app did you use to unroot?
Sent from my C6902 using XDA Premium 4 mobile app
I used king root on my phone. Just go into king root aplication and find option named "unroot this phone" when finished phone was restart then i haved unrooted phone.
gardilim said:
I used king root on my phone. Just go into king root aplication and find option named "unroot this phone" when finished phone was restart then i haved unrooted phone.
Click to expand...
Click to collapse
i UNROOTED my xperia z1c with kingroot option but still have the same problem (could not verify). i've tried restart my phone but nothing.
Plz help