What is this process and what does it do? I found it in \Windows and it's size is 91600 bytes (89.4k). It is nowhere as Autorun or a startup service, yet it starts everytime i turn on the phone. I kill it manually.
If i kill the process, nothing bad happends, everything works, and even better, some lag disappears.
Any1 knows what it is??
See http://forum.xda-developers.com/showthread.php?t=401984&page=6.
I would suggest you start from this page, because of the following quote:
====
HTC had no reason to include an application it their ROM if it wasn't needed.
The application is used wherever a "cube-like" action is requested.
For example kill biotouch, go to your mail and swing left to get to the next msg..
BOUM, phone freeze, soft reset.
At least this happened to me with a 1.93 ROM
===
Killing this process makes the X1 a lot faster on the WM GUI level! No crashes, no freezes, evereything seems to work as normal. So what is it for on the X1?
The only thing I noticed, that PocketBreeze doesn't show the messages on the message tab after killing the process.
on biotouch depend some gestures but you can live without them
Killing biotouch seems to have really given my X1 a kick up the a**! More responsive, task manager shows 5-6% usage now. Nothing seems to be missing either. Eraly days thou, I see how it goes..
When I open and close the screen switches to landscape a whole lot quicker too!
One question on my mind "Whats the catch?"!
Silly question, but how do i see my processes?
Install this task manager on your X1..
Try disabling biotouch.exe
If it gives you an improvement then install this to stop biotouch.exe from starting the next time you restart your X1.. Make sure biotouch.exe has been stopped in the task manager before running this.
It controls finger scrolling through emails etc. and for me I couldn't live without. If you don;t need this then should be fine to kill.
so it only controls scrolling? nothing else?
finger scrolling up/down or left/right (to go to previous/next messages) also?
would killing biotouch make it not work on the screen, but would i still be able to go left/right on the optical pad?
disabled biotouch and still have finger scrolling everywhere, don't have any difference, just less memory consumption an maybe a bit more speed.
I have the normal task manager, but can't see any program running.
Do I have to install the task manager cab from the first page?
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
dogans said:
I have the normal task manager, but can't see any program running.
Do I have to install the task manager cab from the first page?
Click to expand...
Click to collapse
Yes. It runs just like Windows Task Manager highlighting programs running in the background and giving you the option to 'Terminate' (End Task) an application.
I notice that if I have a large html email and use "tap to scroll right" option it starts biotouch.exe.
If the fix is installed to stop biotouch then the phone crashes. So either dont scroll right in the emails or I just remember to kill biotouch once im finished.. Although I get a lot of email I personally dont need to use the scroll right function very often..
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
in this case, biotouch is impt
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
Didn't know my fingers were that powerful
holdout said:
Biotouch enhances logics processing of touch input. It is because of this program that you can use the ultra-small high-res Windows Mobile default keyboard using your thumb on the very small square keys/buttons, and be able to accurately press the buttons you intend to press. (Anyway I prefer Spb Keyboard instead hehe).
Biotouch calculates equidistant midpoints between the perimeter edges of your finger touch, and incorporates touch pressures (with the center of your touch having the most pressure), in its algorithm for accuracy.
Try it yourself: use the keyboard with large keys/buttons on an iPhone 3G, and then use the default Windows Mobile on-screen QWERTY keyboard using your XPERIA which has even smaller keys/buttons. You will be surprised how much easier it is to press the intended buttons on your XPERIA than the iPhone with its capacitative touch screen.
Biotouch helps with other things too like enhancing touch-scrolling based on how much of the touch surface your finger stayed on the screen during a gesture, to decide what type of scroll to do.
Another thing it helps with is distinguishing finger touch from stylus touch. If one small high-pressure point is detected it assumes it's your stylus. In some situations you may be able to scroll easily with your finger but not with your stylus, as using the stylus you would be selecting text instead, for example.
Click to expand...
Click to collapse
Make thes sticky somewhere
Hi everyone!
I have an idea, but I have never programmed in windows mobile and I don't know if It's hard to do or not, or if already exist.
The diamond and the touch pro has 2 type of input, the resistive screen and the d-pad (capacitive and multitouch), it's possible use both input together? For example, with the thumb I touch the d-pad and with the forefinger I touch the resistive screen, so when I move the forefinger up or down it's possible to zoom and if I move it right and left I can rotate.
Otherwise a gesture recognition, I touch the dpad with a finger and with another finger I draw a shape on the screen and an application start.
What do you think about this idea?
PS: sorry for my bad english
http://forum.xda-developers.com/showthread.php?t=536863&highlight=multitouch
Hi guys, does anyone know of any way to get to a settings menu for the touchpad on the keyboard dock? I would really like to disable the option that makes it act as a click when I touch the touchpad. Any time I'm typing with the touchpad on, my hand or finger will accidentally touch the trackpad and click on something. I've started disabling the whole mouse option while typing, but that adds a few extra steps every time I want to type something.
You can disable the touchpad completely with a button on the keyboard (5th button i think...)
Hello everyone, I was wondering if there is any way to use air view to act as a cursor? I believe on the Galaxy Note when you hover the s pen over the screen a little circle follows the pen around and acts like a mouse cursor. I'd like that functionality but with my finger.
If this was possible we could activate hover menus on websites!
daisun said:
Hello everyone, I was wondering if there is any way to use air view to act as a cursor? I believe on the Galaxy Note when you hover the s pen over the screen a little circle follows the pen around and acts like a mouse cursor. I'd like that functionality but with my finger.
If this was possible we could activate hover menus on websites!
Click to expand...
Click to collapse
try dolphin browser or ultimate browser project. I use both and I can use air view to hover over menus and stuff fine.
I noticed that the on-screen gestures for going back (swiping in from the left or right) are not working in the keyboard area. For example if i'm typing something in Whatsapp and want to go back then I have to swipe ABOVE the keyboard for it to work. Otherwise it registers as a keyboard input. The keyboard location is ergonomically the perfect spot to swipe so it's very annoying that this doesn't work.
I never had this problem with my previous phone, a Oneplus 7T Pro, and I am using the same keyboard (Swiftkey).
Anyone with the same problem, or better, the solution?
For new Samsung Devices like S23 series
One Hand Operation +
That's the name of the Samsung app you need. Open its Advanced Settings and disable Fit To Keyboard option.
The app's and OS's gesture systems can coexist without a problem.