Related
anyone have a restore file (Full restore) for A500 in Thailand
I try Acer_A500_0.000.00_1.016.01_COM_GEN1 in link http://cdn.acer.futuredial.com/Acer_A500_0.000.00_1.016.02_COM_GEN1_1300976069475_9bbd8228.zip
from http://forum.xda-developers.com/showthread.php?t=1113878
But can't open file may be file is damage
Can I use Different such as Acer_A500_0.000.00_1.016.01_COM_GEN1
How to flash update package :
Once the desired file downloaded, you have to use Acer Update Decryter to decrypt them.
After decrypting the file, you have to extract the update.zip from it, put it on an external SDCard (does not work on internal memory) and boot your tablet with Vol- & Power. The update will be launch automatically.
thank you very much i'm updating.
the file i choose Acer_A500_0.000.00_1.016.02_COM_GEN1
is right for thailand?
Akabana said:
thank you very much i'm updating.
the file i choose Acer_A500_0.000.00_1.016.02_COM_GEN1
is right for thailand?
Click to expand...
Click to collapse
And I went floor 3 at Acer Dealer, they have a tablet, the version is
Kernel 2.6.36.3-00001-gf991e5d
Build Acer_A500_1.016.04_COM_GEN1
so I am sure the version from THAILAND is this one.
Credit for Sanaell
Thank you. I never install custom kernel how to install it.
It also use CWM and choose Install for sd card? or have to use appication?
Akabana said:
Thank you. I never install custom kernel how to install it.
It also use CWM and choose Install for sd card?
Click to expand...
Click to collapse
Just Copy the update.zip to ur Micro-sd. Then shut down device.
Press both power button + Volume (-) to run recovery.
I mean Kernel not Rom T_T
Ops Sorry.To install Kernel there are lot of them in the first page.But why do u want to install Kernel? I think that u want to back to original ROM for Official OTA.
^^ first that i want to back 3.0 because i want to update by acer to 3.1.
but in facebook acer thailand have many people that update to 3.1 by acer
have a problem. Now I choose to use custom and kernel from this web site ^^
It fast and fun than update by acer . I can try many rom and kernel.
Thank you for answer me hope you can understand my English we also Thai ^^
You have MSN? If have can you tell me.
Thai Language
Hi,
I bought my Iconia in Thailand and was disappointed that it didn't have thai language support, but I've tried many different ROMs and I am now using Virtuous Galaxy which is a great ROM, 3.1 from Samsung Tablet and it has full support for the Thai Language
Paul
Hi Akabana, try this one megaupload.com/?d=Z60CA8FN for Acer_A500_0.000.00_1.016.01_COM_GEN1
now I restore back to 016.01 success
next I will update to my default fw Acer_A500_1.016.01_1.139.04_COM_GEN1
Finally I can't update my a500 from 016.01 to 139.04 :-(
Now, I found that original firmware in Thailand is Acer_A500_1.016.04_COM_GEN1 not Acer_A500_1.016.01_COM_GEN1
Hi everybody,
After I got an imei 0 problem I heard that I need to send it to my local servis and they write it back with no money. But here comes the big problem. I need the original firmware on it but I can't install it. Every time I tried I get install faild warning. I know how to install it. My phone can install every rom with cwm but with the dload I can't. After volume +, - and power combination the installation begins but after 25-30 % it stops. I tried it also in internal sd and external sd.Both doesn't work. Please help me so I can install the firmware and send it to rewrite my imei back.
Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.
cokratex said:
Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.
Click to expand...
Click to collapse
I tried everything but as I told before it didn't work. The install starts but after 25-30% it stops.Strange I have no idea to do.If I find the zip form of the firmware it work with cwm to instal it.Thanks anyway...
Get the battery of the phone and install original like you had the battery for power use the usb cable
Sent from my U8800
Try to copy dload folder into internal drive. Maybe it should work.
Sent from my U8800
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
I am in need of help....
I have a Huawei u8800 pro. I upgraded it to ICS the official upgrade. I had rooted my device when it was on 2.3.5 itself.I had changed the recovery to twrp and had flashed many ROMs onto it which were listed in thus forum. Every ROM were good but always had a problem with the network. I used to go back to the gingerbread everytime because i had a nandroid backup. I then upgraded the phone to the official ICS by the method they had suggested.But I still had the problem with network so I went back to recovery and twrp was not there so i tried to put new one and now I am stuck on image signature verify fail!The pink wont show the image drive also wat should I do.....i am so desparate about wat to do...pls help me..pls reply..thanking u in advance..
Nishadhnash said:
I am in need of help....
I have a Huawei u8800 pro. I upgraded it to ICS the official upgrade. I had rooted my device when it was on 2.3.5 itself.I had changed the recovery to twrp and had flashed many ROMs onto it which were listed in thus forum. Every ROM were good but always had a problem with the network. I used to go back to the gingerbread everytime because i had a nandroid backup. I then upgraded the phone to the official ICS by the method they had suggested.But I still had the problem with network so I went back to recovery and twrp was not there so i tried to put new one and now I am stuck on image signature verify fail!The pink wont show the image drive also wat should I do.....i am so desparate about wat to do...pls help me..pls reply..thanking u in advance..
Click to expand...
Click to collapse
the new one as in TWRP 2.8.6.0?
which version of ICS did you install B928?
if so did you:
check if baseband 404029 instead of 404020?
IMEI wasn't messed up during process?
follow pink screen unlock method?
where does it say image signature verify fail during which process?
I am not able boot the phone its....neither to recover or normal mode...the baseband was 404029..I think
Nishadhnash said:
I am not able boot the phone its....neither to recover or normal mode...the baseband was 404029..I think
Click to expand...
Click to collapse
If you were on B928 version, you can run pink screen unlock to install a custom recovery such as TWRP.
However if you're not able to boot, this possibly means you flashed a wrong firmware. double check if you have a u8800pro not the u8800 or u8800+ (i'm not sure about the + one) they have different firmware.
Overall if you have a u8800pro, i recommend installing the stock B928 following the official procedure, this is almost a foolproof method to fix any possible software issue you may have.
the link below should have all you need.
http://forum.xda-developers.com/showthread.php?t=1736650
Solved the problem
The answer was so simple....If u want all the data present in your mobile download the boot loader unlocker from the website given above by sarsiroslayer..thx man
Paste the Update.App in folder called dload and the folder should be in the root of the sdcard...yes you need a sdcard...and then remove the battery of the phone so it switches off...then connect the phone to the USB wire without battery...and immediatly press the volume. Down,volume up and power button...so it goes to a pink screen..and remember the sdcard should already be placed in the phone...and yes if the phone does not go into pink screen and instead starts to update the software Olla ur phone is fixed......restart and all will be fine...
Ifthis did not work or u don't want any data download the official 2.3.5 android from the huawei site and place the update.app in dload folder and do the same thing as above....My phone is working..:highfive:
Remember remove the battery...before updating ....
Thx all for ur support..xda rocks...
I have typed the solution so even a begginer can utjnderstand...
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.
All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .
Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.
Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .
So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings
Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Does the new update solve the keyboard sensitivity issue??
zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head
Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.
Elephone P9000
Hi Guys I need your help urgently please with my elephone p9000
I am stuck really , I got this phone and tried to root it using kingo and now it is stock on the booting logo , I tried to follow your guide and no success!! can you help me how to flash it using adb method for example.
so far
1- phone boots up
2- getting stuck on the company logo while loading
3- tried flashing it using SP flash tool and downloaded the stock rom and still no success.
4- can you help me on how to flash it using the adb.
would appreciate a detailed step by step for beginners
Many thanks
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
willngg said:
why would you use kingo root in the first place anyway haha... and i've been looking around to see if P9000 can be rooted... havnt found an answer yet ...the phone is still somewhat in presale so maybe later on when more people get their hands on it.
Click to expand...
Click to collapse
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
a.cid said:
Root is now available for the P9000: http://bbs.elephone.hk/thread-9919-1-1.html
(I see you've already commented on the main thread. Just posting the link here for people in the future )
Click to expand...
Click to collapse
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
willngg said:
yea i saw thanks man i was roaming around bbs forum and found it haha.. now my only problem is xposed framework doesnt work well
Click to expand...
Click to collapse
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
a.cid said:
Which version did you install? Afaik, you'd need the 64bit zip for Android 6.0
Click to expand...
Click to collapse
version 80 cant get gravity box to work
does not work, scatter file gives issues
maestro2702 said:
does not work, scatter file gives issues
Click to expand...
Click to collapse
try to shorten scatter file name or place in C:/
use latest version of sp flash tools
https://androidmtk.com/smart-phone-flash-tool
download rom 20160419
https://mega.nz/#!3R0zBQAY!zkdYmMcYzps7p8gzUKVBYY9jjwNLgb6mnA9OGKRDY3E
Root using this tutorial
http://bbs.elephone.hk/thread-9919-1-1.html
Detailed instructions German (not the confused instruction of elephone.hk)
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Tried it, but it did not work. tried it multiple times, it states a succes. Download OK. But when i try to start TWRP by holding vol+ and power, or vol+ and vol- and power
it just starts normally, or it gets me to the factory settings.
snoopyminou said:
This is an detailed instruction of Root and install TWRP on Elephone P 9000 (not P 9000 lite).
Follow the link please (its in german language,translate it on any translator in your language if you need).
Big thx to the Author of the Instructions.
chinamobilemag.de/tutorials/elephone-p9000-root-twrp-tutorial.html
Have a lot....:good:
Click to expand...
Click to collapse
also tried the drivers, and stuff from this page : https://elephonemobile.eu/t/how-to-root-latest-elephone-p9000-stock-rom/34
I have : Elephone_P9000_20160628 does this have to do with it ?
and i now tried a wireless update... to 20160715 but it says, it will restart in recovery mode to do the update, but then the phone keeps hanging on the ELEPHONE logo... so i can not update the phone anymore apparently... ( so something is done to the factory settings :s but not the TWRMP )
i'm gonna try now the scatt file from my firmware build that i downloaded here : http://www.android-hilfe.de/thema/o...-p9000-p9000-lite-uebersicht-download.785193/
did not work, but now i have the original recovery back on the device, and now i can do the wireless update to 20160715 so i now have latest version of my P9000 firmware... but now... still my main question how to root it that TWRP works
Help !!! i don't use the phone untill i can install xposed framework and Xprivacy on it
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
hozumi70 said:
Hi Guys! Is it possible to do root on nugat in P9000? I try different ways but there is always a bootloop
Click to expand...
Click to collapse
Flash magisk via TWRP.
Hi.
I think my problem is unusual.
I try to install TWRP and/or root my device.
I red a few instructions in german and english.
And still nothing.
Details.
1. I have the compilation: from 2016.08.10.
2. Updater says I have new soft. I can download it 100 times. It says "downloading", then "installing" and "rebooting" but in the end nothing changes: still the same rom, still I can download and install this new soft (from 2017.1.12, 927,13 MB).
3. I can open the recovery mode. This is impossible for this device. Power+UP, Power+DOWN = doesn't matter. I see something like bootloop, but after 10-20 seconds the system is rebooting normally. No recovery.
3A. I didn't find an extra settings in "Options" which give more possibilities during turning off (for example: "restart in recovery").
As You see I can't make the backup (nesessary for me) that is why I didn't try "factory reset".
4. Instructions from Internet didn't work:
a) "MT65xx USB VCOM DRIVERS" installs some drivers but I don't have "Ports (COM&LPT) for Windows 10,
b) "SP_Flash_Tool_v5.1640_Win": no scatter file, don't know how to make it, the file from Internet didn't help,
c) "SP_Flash_Tool_v5.1640_Win": I can't tick "recovery" and any other option,
d) "Mtk_Droid_Tool_v2.5.3": it doesn't show any informations about the device.
As You see I can nothing with my P9000.
Do You have any ideas?