[Q] - Huawei Ideos X5 U8800

Hi everybody,
After I got an imei 0 problem I heard that I need to send it to my local servis and they write it back with no money. But here comes the big problem. I need the original firmware on it but I can't install it. Every time I tried I get install faild warning. I know how to install it. My phone can install every rom with cwm but with the dload I can't. After volume +, - and power combination the installation begins but after 25-30 % it stops. I tried it also in internal sd and external sd.Both doesn't work. Please help me so I can install the firmware and send it to rewrite my imei back.

Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.

cokratex said:
Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.
Click to expand...
Click to collapse
I tried everything but as I told before it didn't work. The install starts but after 25-30% it stops.Strange I have no idea to do.If I find the zip form of the firmware it work with cwm to instal it.Thanks anyway...

Get the battery of the phone and install original like you had the battery for power use the usb cable
Sent from my U8800

Try to copy dload folder into internal drive. Maybe it should work.
Sent from my U8800

3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.

Related

Unbrick U8800 with Odin?

Hi there!
I have bricked my phone and it is in "download" mode.
Is there a way to "bring it back" with Odin?
Thanks!
M.
Did they repaired your phone for the second time? If not, what did they said? What did you do in the first place that you bricked it?
Sent from my Ideos X5
Still waitin'
Nobody called me, don't know what's happening with my phone.
Get back here when new info available.
No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307
darkfiremark said:
No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307
Click to expand...
Click to collapse
People still doesn't read. I said that it is bricked! Cannot install anything on.
Brgds
What do you mean by download mode? if you turn it on with vol up and down and power held, what happens?
Try put stock rom (2.3 or 2.2 depending on what was on phone before) in dload folder on sd card and it might flash firmware off that.
If you're on download mode then you can upload a recovery an boot image. Do it and use that to flash any rom you want.
I appreciate people trying to help. But sometimes it is good to stay quiet. So please, don't reply with funny suggestions.
Thanks.
Hello;
What, exactly, is "download mode"?
For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?
bonowax said:
Hello;
What, exactly, is "download mode"?
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/177526-how-enter-download-mode-what-worked-me.html
VuDuCuRSe said:
For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?
Click to expand...
Click to collapse
I am just trying to say that sometimes it is better to no reply at all.
If i said that the telephone is bricked and only in download mode you should know what does it mean before you reply. That's all. No hard feelings.
Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck
bonowax said:
Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck
Click to expand...
Click to collapse
I tried all you mentioned 30 X and more then that But no success
Btw: if you dumped back your partition from backup you had access to internal memory ... i don't have that connection neither on Ubuntu or Windows. I got pink screen but it is in "Download mode" only.
Thanks.
Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace
I've had download mode on my previous Android device - LG GT540. All it needed to enter such mode was to remove the battery, SIM and sdcard , and plug the USB cable. It would enter download mode and allow a stock ROM to be flashed with the standard LG update tool.
Actually, I dumped partition 5 back to the phone prior to erasing every file system in it, and indeed had pink screen mode access in order to do it...
Sorry it didn't work out for you.
Loureiro said:
Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace
Click to expand...
Click to collapse
I've installed some custom ROM and after reboot it stopped to boot in HUAWEI logo. And that was it. I have tried to install official ROM's all of them with standard methods (dload folder) but every time ends in step 2/2 (installation failed or something like that). I opened up new thread with that few weeks ago:
http://forum.xda-developers.com/showthread.php?t=1466953
This thread was supposed to answer my question at the top. And some guys did. I don't know how can thread be closed by the author. I've try to find it but with no success.
I appreciate people like to help. But if people don't know what i am asking why answering and asking questions that are answered in many threads before.
You see .. this thread should be as small as possible but ends with looong explanations which doesn't help at all
Peace.
Moved To Q&A​
We now have a Q&A section. Please post all questions there​

ROM installs not working.

Ok so I started out with an x5 running an oxygen ROM ( unsure what one as its been awhile) with a full battery.
1. I then went to install the Aurora ICS 2.0.5 after doing all the wipes needed went to load and all i got was a system that fuctioned but not network service and no battery charging and the device showing 1% battery (it was full to start with).
2. I also tried the Elite.SX.Second.Release-FIXED.by.TerraMino.2012-03-29 ROM (all wipes done) just to get the same things happening
also tried to install and older Oxygen ROMs , oxygen 2.2.2 - 2.3.2 all wipes done) but the device didnt boot.
3. So then I tried a stock ROM via the dload method by puting this [11.07.28]_U8800_V100R001C17B162CUSTC17D001_(China_Unicom)(also another stock ROM I dont remember which) UPDATE.APP on the SD card (Cant put the UPDATE.APP on to internal memory as it is to large) then went to boot into the "pink screen" but nothing happened (both ROM's). Also tried many methods to try to get it to work.
4. After that I thought I would try Miui Prime v3 - by LegoLaSH (done all wipes and formats needed) once it booted I got no network service and battery at 0% although it is Full before starting. Also no battery charging while device is on.
5. I figured Id try ( althoug I guessed it wouldnt work)to install an Oxygen ROM first then install Elite.SX.Second.Release-FIXED.by.TerraMino.2012-03-29 ROM streight after it without wipes , still the same problems as installing the elite ROM alone.
So now Im here and stuck. Is there no flasher for Hauwei phones? oranother way I can get a ROM on the device? Its not my Phone its my partners.
Also its not the First Phone I have ever installed a custom ROM on although seems to be the hardest.
If any idea or more info needed please post.
thanks alot.
Confrontation
You need to install the official 2.3 rom before installing any of those roms.
FlashTH said:
You need to install the official 2.3 rom before installing any of those roms.
Click to expand...
Click to collapse
I know , But as in put 3 , that is an official ROM and the method to install it will not work.
confrontation said:
I know , But as in put 3 , that is an official ROM and the method to install it will not work.
Click to expand...
Click to collapse
Are you sure you put the UPDATE.APP inside the dload folder which is in the root of the sdcard? I never heard of this not working.
I am not sure which files the official 2.3 rom updates, but wouldn't it be possible to copy them from an updated U8800?
FlashTH said:
Are you sure you put the UPDATE.APP inside the dload folder which is in the root of the sdcard? I never heard of this not working.
I am not sure which files the official 2.3 rom updates, but wouldn't it be possible to copy them from an updated U8800?
Click to expand...
Click to collapse
I had a freshly formated SD card with no other files or folders and I had the UPDATE.APP in a folder named dload on the SD card.
Is that not the right way?
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
yannn007 said:
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
Click to expand...
Click to collapse
The problem is that he can't update to the official 2.3.5, the update doesn't start.
confrontation said:
3. So then I tried a stock ROM via the dload method by puting this [11.07.28]_U8800_V100R001C17B162CUSTC17D001_(China_Unicom)(also another stock ROM I dont remember which) UPDATE.APP on the SD card (Cant put the UPDATE.APP on to internal memory as it is to large) then went to boot into the "pink screen" but nothing happened (both ROM's). Also tried many methods to try to get it to work
Confrontation
Click to expand...
Click to collapse
The UPDATE.APP file is only around 300 megs so will easily fit on your internal 2Gb memory so sounds like your trying to copy it to the pink screen memory which is wrong!
yannn007 said:
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
Click to expand...
Click to collapse
If you had read my post properly you would see I already know. thanks for you unhelpful post.
Also the Huawei link is giving me an Service Temporarily Unavailable message , and has since the other day , if you can upload it somewhere or anybody , I can download it then.
I think the problem is that he has a custom partition layout for the internal emmc, that needs to be reset to the default before installing the update.
look here for instructions:
http://forum.xda-developers.com/showthread.php?t=1112857
dzo said:
I think the problem is that he has a custom partition layout for the internal emmc, that needs to be reset to the default before installing the update.
look here for instructions:
http://forum.xda-developers.com/showthread.php?t=1112857
Click to expand...
Click to collapse
Do I use the return-to-stock partition file or the 1.2G DATA + 1.46G INTERNAL SD file? Thanks
Ok I have tried both return-to-stock partition and 1.2G DATA + 1.46G INTERNAL SD file , I still cant get the internal SD to show on 2 computers.
I really hve no idea now.
The same problem after installing Aurora. Installed 2.3 first. Now can't install official update, just a pinkscreen, nothing happens. All custom ROMs easily installs with CWM.
Sent from my U8800 using xda premium
thank you very much!
confrontation said:
Ok I have tried both return-to-stock partition and 1.2G DATA + 1.46G INTERNAL SD file , I still cant get the internal SD to show on 2 computers.
I really hve no idea now.
Click to expand...
Click to collapse
Dzo is probably right about the partition layout of your internal mmc. But probably you cannot fix it with geno's method. I would suggest you to check this post http://forum.xda-developers.com/showthread.php?t=1579366
Also it seems to me that you have the imei=0 problem when you updated from 2.2.2 to 2.3.5 (no network - battery 1% or 0% are common problems)
And try not to flash different kernel based roms without upgrading/downgrading to the appropriate kernel, as this probably has damaged your phone.
Hope that helps
halman said:
Dzo is probably right about the partition layout of your internal mmc. But probably you cannot fix it with geno's method. I would suggest you to check this post http://forum.xda-developers.com/showthread.php?t=1579366
Also it seems to me that you have the imei=0 problem when you updated from 2.2.2 to 2.3.5 (no network - battery 1% or 0% are common problems)
And try not to flash different kernel based roms without upgrading/downgrading to the appropriate kernel, as this probably has damaged your phone.
Hope that helps
Click to expand...
Click to collapse
Thanks will try after dinner.
the Huawei site would let me download the 2.3.5 ROM , can somebody upload it to or link me to a download? Cheers
confrontation said:
the Huawei site would let me download the 2.3.5 ROM , can somebody upload it to or link me to a download? Cheers
Click to expand...
Click to collapse
Check this post http://forum.xda-developers.com/showthread.php?t=1546883
Well well well , I found my other SD card ( better quality SD card ) and BAM! dload works 1st time.
Thanks for all the help from the people who posted here , I have learnt alot from all this.
Thank you thank you.

U8800 Problems Updating to Aurora 4.0 from Oxygen

Hi,
Have looked around the forum trying to find similar threads, however haven't found anything quite the same. I have been trying to update to Aurora from Oxygen and had got to the stage where I erased all phone and sd card data and then copied the "dload" folder containing "Update.app" inside it to the sd card. I then powered off the phone and then turned it back on whilst holding power,volume + and Volume - . The update starts and then around 10 seconds in a message comes up saying that the update has failed. I do not know what the problem is, any help on the matter would be greatly appreciated.
Thanks.
Put dload of official 2.3 in hwuserdata/internal sdcard
Then update
Also http://forum.xda-developers.com/showthread.php?t=1420728
Hi,
Thanks for the suggestion, however the same thing is still happening
try remove battery and plug the usb cable... then start the upgrade...
when it starts u can choose to put your battery wich a recomend or try to do it without plug again the battery...
perhaps it will work...
hope i helped
try this way.
INstall any stock 2.2 (froyo) the same way by putting the dload folder in the inmternal SD.
After install is complete install the stock 2.3 on top using the same procedure.
Note that you have to have a stock partition table too. Make sure you restore the default partition table:
http://huaweiideosx5u8800.blogspot.com.au/2012/01/re-partitioning-idoes-x5.html
http://forum.xda-developers.com/showthread.php?t=1112857
Thanks again, however none of the suggestions worked

[Q] U8800-51 CR GB Read-Only Mass Storage and wrong IMEI

Well, Hi!
A little history before the real problem.
My girlfriend bought a U8800-51 phone by my recommendations, because it's a great phone in this range of prices.
The phone had a problem. It reboot many times in a day (10~20 times) So I decided to upgrade the OS to GB with the gingermovida v1.1 ROM.
The phone stopped in the bootanimation secuence. I tried 5 times with the same result.
I downloaded the official 2.2.2 ROM from the Huawei website and put it in the SD card. I turned on the phone in download mode and started the install secuence. But stopped in the 2/2 step with the "Update Failed" message.
I tried to enter in recovery mode without success, with 5 different "recovery.img" files. In a thread in this forum somebody explained a method to back to stock froyo ROM using a .img file and the Roadkil's Disk Image tool, but with a AT&T img file.
My brother has the same phone so i made a backup of his phone and put it in my girlfriend phone. Everything works great! Boot OS and load all the information, 3G work and USB Mass storage work, so I did a wipe data - factory reset and everyrhing works again.
At this point I discovered that the IMEI is the same of my brother's phone. I tried many different tricks or tutorials (QPST, CDMA Tool, DFS, AT Command in Terminal, etc) and nothing changed. In the last try I upgraded the OS using CM7 movida v2 and 3G works, WiFi works, but I still have the same IMEI and a new problem came out. When I plug the USB cable and activate the Mass Storage Mode, only shows a Read Only CD drive with all SD Card files.
In the stock froyo ROM I went to the "Project Menu" and changed the USB options, but I can't remember in what option I leave it. In this ROM (CM7 movida v2) i can't go to this menu and check if I have the same Stock ROM configuration.
Besides, I didn't backed up my GF'S IMEI. So I don't know if it can be recovered.
She's gonna kill me, so I need a little help ASAP!
That's all. So here's the thing:
- I have the same IMEI of my brother's phone.
- Everything works except for the Read-Only Mass Storage Mode.
P.S: I don't know if the different driver that I installed affect something here.
Try to upgrade your phone, puting dload folder on sdcard, maybe it can fix your IMEI. About the mounting, I dont know what is happening, but maybe if you upgrade your OS, it will work fine..
What ROM can I use? The Official Huawei ROM (Movilnet U8800-51) didn't work (to solve the IMEI problem) If I try to downgrade using that ROM the phone stop in the 2 step and then I will need to do everything again.
What about B565? You can download it here: http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDEyMTU=
And I also found this topic, there is a user who says the solution so check it out http://forum.xda-developers.com/showthread.php?t=1513439
Well, that ROM is for PRO version of the U8800 phone and I have the U8800-51 version. Baseband and other thing are different between versions. I will try the steps of your link when my girlfriend let me try again
Sorry, my mistake :/
I dont own a u8800 51 but the software isnt the same as u8800?
No, unfortunately, like I said: Baseband and other tiny thing are differents :crying:
-.-" Wait a bit, maybe someone will help you
Do you have any sort of backup from where you were when the phone worked correctly?
that's why I don't share backup. The fw on the -51 is tightly locked. I'm surprised they allowed pink screen. Your better off going for warranty. Unless, you can open the background password. I'll look for an alternative fix.
Sent from my U8800-51
eyeconic said:
Do you have any sort of backup from where you were when the phone worked correctly?
Click to expand...
Click to collapse
I don't have any backup.
Somcom3X said:
that's why I don't share backup. The fw on the -51 is tightly locked. I'm surprised they allowed pink screen. Your better off going for warranty. Unless, you can open the background password. I'll look for an alternative fix.
Click to expand...
Click to collapse
But I tried with differents codes for the background password without success
0, 000, 1234, 111, 999... etc nothing work
xolott said:
I don't have any backup.
But I tried with differents codes for the background password without success
0, 000, 1234, 111, 999... etc nothing work
Click to expand...
Click to collapse
Gotta love Att.
Sent from my U8800Pro using Tapatalk 2

Huawei u8800 pro stuck on image signature verification fail!

I am in need of help....
I have a Huawei u8800 pro. I upgraded it to ICS the official upgrade. I had rooted my device when it was on 2.3.5 itself.I had changed the recovery to twrp and had flashed many ROMs onto it which were listed in thus forum. Every ROM were good but always had a problem with the network. I used to go back to the gingerbread everytime because i had a nandroid backup. I then upgraded the phone to the official ICS by the method they had suggested.But I still had the problem with network so I went back to recovery and twrp was not there so i tried to put new one and now I am stuck on image signature verify fail!The pink wont show the image drive also wat should I do.....i am so desparate about wat to do...pls help me..pls reply..thanking u in advance..
Nishadhnash said:
I am in need of help....
I have a Huawei u8800 pro. I upgraded it to ICS the official upgrade. I had rooted my device when it was on 2.3.5 itself.I had changed the recovery to twrp and had flashed many ROMs onto it which were listed in thus forum. Every ROM were good but always had a problem with the network. I used to go back to the gingerbread everytime because i had a nandroid backup. I then upgraded the phone to the official ICS by the method they had suggested.But I still had the problem with network so I went back to recovery and twrp was not there so i tried to put new one and now I am stuck on image signature verify fail!The pink wont show the image drive also wat should I do.....i am so desparate about wat to do...pls help me..pls reply..thanking u in advance..
Click to expand...
Click to collapse
the new one as in TWRP 2.8.6.0?
which version of ICS did you install B928?
if so did you:
check if baseband 404029 instead of 404020?
IMEI wasn't messed up during process?
follow pink screen unlock method?
where does it say image signature verify fail during which process?
I am not able boot the phone its....neither to recover or normal mode...the baseband was 404029..I think
Nishadhnash said:
I am not able boot the phone its....neither to recover or normal mode...the baseband was 404029..I think
Click to expand...
Click to collapse
If you were on B928 version, you can run pink screen unlock to install a custom recovery such as TWRP.
However if you're not able to boot, this possibly means you flashed a wrong firmware. double check if you have a u8800pro not the u8800 or u8800+ (i'm not sure about the + one) they have different firmware.
Overall if you have a u8800pro, i recommend installing the stock B928 following the official procedure, this is almost a foolproof method to fix any possible software issue you may have.
the link below should have all you need.
http://forum.xda-developers.com/showthread.php?t=1736650
Solved the problem
The answer was so simple....If u want all the data present in your mobile download the boot loader unlocker from the website given above by sarsiroslayer..thx man
Paste the Update.App in folder called dload and the folder should be in the root of the sdcard...yes you need a sdcard...and then remove the battery of the phone so it switches off...then connect the phone to the USB wire without battery...and immediatly press the volume. Down,volume up and power button...so it goes to a pink screen..and remember the sdcard should already be placed in the phone...and yes if the phone does not go into pink screen and instead starts to update the software Olla ur phone is fixed......restart and all will be fine...
Ifthis did not work or u don't want any data download the official 2.3.5 android from the huawei site and place the update.app in dload folder and do the same thing as above....My phone is working..:highfive:
Remember remove the battery...before updating ....
Thx all for ur support..xda rocks...
I have typed the solution so even a begginer can utjnderstand...

Categories

Resources