Related
Hello People,
Firstly I would like to apologize if this is a duplicate post, Googling reveals tons of different documents which actually has confused me and as I have tried many, I don't even know now what have I screwed up.
Phone - U8800H
OS - Linux
I tried to update my phone and it got messed up. It simply won't boot but go in an infinite loop or restarting every 3 seconds (once the HUAWEI logo is displayed).
By pressing both Vol buttons and starting the phone I can go into bootloader mode (pink screen) and the phone drives get mounted. However trying to go to recover mode by pressing the Vol UP key during start up simply again keeps restarting the phone.
I have tried various solutions which include re-downloading the images folder files again, replacing the recover.img from clockwork, formatting that partition and retrying, almost everything.
The phone simply keeps restarting. Replacing or removing any of the file in the images folder gives me a blue screen during going to bootloader mode.
As I cant get to recover mode I don't know what to do.
The warranty of the phone is finished as it was only of three months. I was told by the company I purchased it from to be a "power problem" but I think its a software problem as I messed it up myself.
If anyone has faced such situation before please help.
Thanks.
find original rom and reinstall it.
Otherwise what rom where you on?
arkudos said:
find original rom and reinstall it.
Otherwise what rom where you on?
Click to expand...
Click to collapse
U cant install rom without clockworkmod?
sent from ideos x5
eddydc1 said:
U cant install rom without clockworkmod?
sent from ideos x5
Click to expand...
Click to collapse
_original_ means what the phone came with
Rom is the.......
He needs to go back to original phone, or to find probably the old boot.img he had, that is why I asked which rom he was on....
arkudos said:
_original_ means what the phone came with
Rom is the.......
He needs to go back to original phone, or to find probably the old boot.img he had, that is why I asked which rom he was on....
Click to expand...
Click to collapse
Okk
sent from ideos x5
The original ROM was U8800HV100R001AREC00B135SP01 CUSTC213D001 (Kuwait VIVA). I have downloaded it as well.
However as suggested it asks me to create a dload folder in a formatted SD card with the zipped files within it, and then start the phone in 'recovery mode'. However the phone doesn't start in that mode with the same restarting issue.
One person suggested to create a 'dload' folder in the SD card with no contents in it and then start the phone in 'bootloader' mode and the phone will auto revert to its default firmware. I did as suggested but it didn't work either.
I have the original boot.img that came with the phone. I also downloaded a fresh boot.img (along with the other three files that come in the images folder) but still the same result of restarting during trying to start in 'recover mode'.
It was working fine till I messed it up trying to upgrade it to 2.3 to change the patched wpa_supplicant file to connect to Ad-Hoc networks.
I think I need to change the files required for 'recover mode' to default ones, but I don't know where they reside. Any tutorial in this direction would be great.
Thanks.
My guess is that some of the partitions got messed up somehow, some different filesystems (ext4 over ext3) in 2.3 stock fw.
Have you tried copying update.app to dload-folder of sdcard then booted phone with both vol-down and vol-up pressed (bootloader mode). That should in theory start the update...
Sent from my u8800 using XDA App
huzefa_from_kuwait said:
The original ROM was U8800HV100R001AREC00B135SP01 CUSTC213D001 (Kuwait VIVA). I have downloaded it as well.
However as suggested it asks me to create a dload folder in a formatted SD card with the zipped files within it, and then start the phone in 'recovery mode'. However the phone doesn't start in that mode with the same restarting issue.
One person suggested to create a 'dload' folder in the SD card with no contents in it and then start the phone in 'bootloader' mode and the phone will auto revert to its default firmware. I did as suggested but it didn't work either.
I have the original boot.img that came with the phone. I also downloaded a fresh boot.img (along with the other three files that come in the images folder) but still the same result of restarting during trying to start in 'recover mode'.
It was working fine till I messed it up trying to upgrade it to 2.3 to change the patched wpa_supplicant file to connect to Ad-Hoc networks.
I think I need to change the files required for 'recover mode' to default ones, but I don't know where they reside. Any tutorial in this direction would be great.
Thanks.
Click to expand...
Click to collapse
Ok then.... because I'm lost... which rom was on!
2.2.1?
or 2.3.?
these are the files needed FIRST....
---------- Post added at 05:31 PM ---------- Previous post was at 05:16 PM ----------
Ok IF you were on 2.2.... on sdcard make \dload folder with update 2.2 original rom!!!!
Vol+ Vol- Power on...pink screen and it should do the rest!!!
Recovery after you reinstall 2.2!
Now IF you managed to put 2.3... then put 2.3 update in sdcard \dload and again it should do the rest.
If you are trying to come back to 2.2 or miui oxygen cm7 from the beta.... first put the 2.3 beta back on via the sdcard.
I have put the original ROM in 'dload' folder and as suggested I shall have started the phone in 'bootloader' mode now. There is no movement on the screen so I don't know even if its doing something.
How much should I wait or shall I be notified if the update is done ?
Thanks.
huzefa_from_kuwait said:
I have put the original ROM in 'dload' folder and as suggested I shall have started the phone in 'bootloader' mode now. There is no movement on the screen so I don't know even if its doing something.
How much should I wait or shall I be notified if the update is done ?
Thanks.
Click to expand...
Click to collapse
Is your folder structure like this
/sd
/sd/dload
/sd/dload/update.app
If it is, then boot to bootloader. you should see it is doing stuff.
julle131 said:
Is your folder structure like this
/sd
/sd/dload
/sd/dload/update.app
If it is, then boot to bootloader. you should see it is doing stuff.
Click to expand...
Click to collapse
I have double checked it again, the structure is 'dload' folder in the root of the memory card and the update.app file in it, still however I don't see any movement in the 'bootloader' mode, just the "pink" screen continuously lit.
What am I doing wrong ?
Thanks.
huzefa_from_kuwait said:
I have double checked it again, the structure is 'dload' folder in the root of the memory card and the update.app file in it, still however I don't see any movement in the 'bootloader' mode, just the "pink" screen continuously lit.
What am I doing wrong ?
Thanks.
Click to expand...
Click to collapse
Pink screens means it didn't work. Your phone isn't mounting the sd-card right in bootloader mode. You could try to put the dload-folder on internal sd-card, should be possible since you're on linux. Think you just need to mount the right partition when connecting your phone via usb when in pinkscreen. I don't recall exactly which partition as I'm using Windows and haven't tried this, but you should be able to find some more info around here by searching a bit...
U8800
Hello XDA-Forum!
Same problem here with my u8800
I have original recovery.img but i fd' other files by overwriting them.. (yes i know...)
Now my phone doesen't start flashing and i cant do anything. I was using almost latest version of oxygen mod.
Do i need original files to flash my phone back to stock in image/... floder? And if i need, can i dig version form recovery.img? or might this is problem with partitions? I think oxygen is known by partition problems.
HFZenon said:
Pink screens means it didn't work. Your phone isn't mounting the sd-card right in bootloader mode. You could try to put the dload-folder on internal sd-card, should be possible since you're on linux. Think you just need to mount the right partition when connecting your phone via usb when in pinkscreen. I don't recall exactly which partition as I'm using Windows and haven't tried this, but you should be able to find some more info around here by searching a bit...
Click to expand...
Click to collapse
I have tried as you suggested, There were 5 partitions on the phone 2 of which were smaller than 200MB and therefore could not save the update file which is larger in size. I have tried over the remaining three partitions but in vain, they all end up with the same pink screen.
However you might be correct that my phone is not mounting the SD card as I can't see the SD card in the list of mounted drives in the computer.
To put/move files on SD card I have to use my another phone
I will get another SD card and try. In the meanwhile if there is anything else I could try, do advice me.
Thanks.
Nahkamies said:
Hello XDA-Forum!
Same problem here with my u8800
I have original recovery.img but i fd' other files by overwriting them.. (yes i know...)
Now my phone doesen't start flashing and i cant do anything. I was using almost latest version of oxygen mod.
Do i need original files to flash my phone back to stock in image/... floder? And if i need, can i dig version form recovery.img? or might this is problem with partitions? I think oxygen is known by partition problems.
Click to expand...
Click to collapse
Hi, and welcome to XDA!
I guess you got the same problem with sd-card not mounting properly if you can't initiate stock flashing via dload-folder-method.
If you search the forums you'll find links to download all files that's needed in the image-folder of pinkscreen-partition. Then you'll hopefully be able to boot to recovery (vol-up + power), wipe data/cache/dalvik cache and flash whatever ROM you'd like. Remember this erases all your data, hopefully you've backed up whatever precious stuff you've got on your phone.
HFZenon said:
Hi, and welcome to XDA!
If you search the forums you'll find links to download all files that's needed in the image-folder of pinkscreen-partition.
Click to expand...
Click to collapse
Thank u!
I loaded Official 2.3 overseas original boot.img & recovery.img but nothing new happened. volume up+power = bootloop, if i try flash volumeup+down + power = pinkscreen. If i delete image folder comes blue. Another ideas?
Nahkamies said:
Thank u!
I loaded Official 2.3 overseas original boot.img & recovery.img but nothing new happened. volume up+power = bootloop, if i try flash volumeup+down + power = pinkscreen. If i delete image folder comes blue. Another ideas?
Click to expand...
Click to collapse
Remember that you need all files from the same version. Try this, those are from stock 2.2 if I'm not mistaken. When (if?) you get into recovery, remember to clear cache / data / dalvik cache.
HFZenon said:
Remember that you need all files from the same version. Try....
Click to expand...
Click to collapse
Bingo! I'm very grateful of your help!
Nahkamies said:
Bingo! I'm very grateful of your help!
Click to expand...
Click to collapse
Glad to hear you get it working as we both had the basically same problem.
For me however still it is the same issue, except that while going into the recover mode now it shuts down instead or restarting endlessly. Where as the bootloader mode simply does nothing.
Can you post the exact steps you did to get your work so I can also repeat them?
Thanks.
@huzefa_from_kuwait:
You've got the U8800H right? Then you need to find the correct image-folder for your phone, as it differs from what I uploaded which is for U8800.
Hi there!
I have bricked my phone and it is in "download" mode.
Is there a way to "bring it back" with Odin?
Thanks!
M.
Did they repaired your phone for the second time? If not, what did they said? What did you do in the first place that you bricked it?
Sent from my Ideos X5
Still waitin'
Nobody called me, don't know what's happening with my phone.
Get back here when new info available.
No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307
darkfiremark said:
No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307
Click to expand...
Click to collapse
People still doesn't read. I said that it is bricked! Cannot install anything on.
Brgds
What do you mean by download mode? if you turn it on with vol up and down and power held, what happens?
Try put stock rom (2.3 or 2.2 depending on what was on phone before) in dload folder on sd card and it might flash firmware off that.
If you're on download mode then you can upload a recovery an boot image. Do it and use that to flash any rom you want.
I appreciate people trying to help. But sometimes it is good to stay quiet. So please, don't reply with funny suggestions.
Thanks.
Hello;
What, exactly, is "download mode"?
For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?
bonowax said:
Hello;
What, exactly, is "download mode"?
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/177526-how-enter-download-mode-what-worked-me.html
VuDuCuRSe said:
For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?
Click to expand...
Click to collapse
I am just trying to say that sometimes it is better to no reply at all.
If i said that the telephone is bricked and only in download mode you should know what does it mean before you reply. That's all. No hard feelings.
Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck
bonowax said:
Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck
Click to expand...
Click to collapse
I tried all you mentioned 30 X and more then that But no success
Btw: if you dumped back your partition from backup you had access to internal memory ... i don't have that connection neither on Ubuntu or Windows. I got pink screen but it is in "Download mode" only.
Thanks.
Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace
I've had download mode on my previous Android device - LG GT540. All it needed to enter such mode was to remove the battery, SIM and sdcard , and plug the USB cable. It would enter download mode and allow a stock ROM to be flashed with the standard LG update tool.
Actually, I dumped partition 5 back to the phone prior to erasing every file system in it, and indeed had pink screen mode access in order to do it...
Sorry it didn't work out for you.
Loureiro said:
Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace
Click to expand...
Click to collapse
I've installed some custom ROM and after reboot it stopped to boot in HUAWEI logo. And that was it. I have tried to install official ROM's all of them with standard methods (dload folder) but every time ends in step 2/2 (installation failed or something like that). I opened up new thread with that few weeks ago:
http://forum.xda-developers.com/showthread.php?t=1466953
This thread was supposed to answer my question at the top. And some guys did. I don't know how can thread be closed by the author. I've try to find it but with no success.
I appreciate people like to help. But if people don't know what i am asking why answering and asking questions that are answered in many threads before.
You see .. this thread should be as small as possible but ends with looong explanations which doesn't help at all
Peace.
Moved To Q&A
We now have a Q&A section. Please post all questions there
Ok so I started out with an x5 running an oxygen ROM ( unsure what one as its been awhile) with a full battery.
1. I then went to install the Aurora ICS 2.0.5 after doing all the wipes needed went to load and all i got was a system that fuctioned but not network service and no battery charging and the device showing 1% battery (it was full to start with).
2. I also tried the Elite.SX.Second.Release-FIXED.by.TerraMino.2012-03-29 ROM (all wipes done) just to get the same things happening
also tried to install and older Oxygen ROMs , oxygen 2.2.2 - 2.3.2 all wipes done) but the device didnt boot.
3. So then I tried a stock ROM via the dload method by puting this [11.07.28]_U8800_V100R001C17B162CUSTC17D001_(China_Unicom)(also another stock ROM I dont remember which) UPDATE.APP on the SD card (Cant put the UPDATE.APP on to internal memory as it is to large) then went to boot into the "pink screen" but nothing happened (both ROM's). Also tried many methods to try to get it to work.
4. After that I thought I would try Miui Prime v3 - by LegoLaSH (done all wipes and formats needed) once it booted I got no network service and battery at 0% although it is Full before starting. Also no battery charging while device is on.
5. I figured Id try ( althoug I guessed it wouldnt work)to install an Oxygen ROM first then install Elite.SX.Second.Release-FIXED.by.TerraMino.2012-03-29 ROM streight after it without wipes , still the same problems as installing the elite ROM alone.
So now Im here and stuck. Is there no flasher for Hauwei phones? oranother way I can get a ROM on the device? Its not my Phone its my partners.
Also its not the First Phone I have ever installed a custom ROM on although seems to be the hardest.
If any idea or more info needed please post.
thanks alot.
Confrontation
You need to install the official 2.3 rom before installing any of those roms.
FlashTH said:
You need to install the official 2.3 rom before installing any of those roms.
Click to expand...
Click to collapse
I know , But as in put 3 , that is an official ROM and the method to install it will not work.
confrontation said:
I know , But as in put 3 , that is an official ROM and the method to install it will not work.
Click to expand...
Click to collapse
Are you sure you put the UPDATE.APP inside the dload folder which is in the root of the sdcard? I never heard of this not working.
I am not sure which files the official 2.3 rom updates, but wouldn't it be possible to copy them from an updated U8800?
FlashTH said:
Are you sure you put the UPDATE.APP inside the dload folder which is in the root of the sdcard? I never heard of this not working.
I am not sure which files the official 2.3 rom updates, but wouldn't it be possible to copy them from an updated U8800?
Click to expand...
Click to collapse
I had a freshly formated SD card with no other files or folders and I had the UPDATE.APP in a folder named dload on the SD card.
Is that not the right way?
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
yannn007 said:
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
Click to expand...
Click to collapse
The problem is that he can't update to the official 2.3.5, the update doesn't start.
confrontation said:
3. So then I tried a stock ROM via the dload method by puting this [11.07.28]_U8800_V100R001C17B162CUSTC17D001_(China_Unicom)(also another stock ROM I dont remember which) UPDATE.APP on the SD card (Cant put the UPDATE.APP on to internal memory as it is to large) then went to boot into the "pink screen" but nothing happened (both ROM's). Also tried many methods to try to get it to work
Confrontation
Click to expand...
Click to collapse
The UPDATE.APP file is only around 300 megs so will easily fit on your internal 2Gb memory so sounds like your trying to copy it to the pink screen memory which is wrong!
yannn007 said:
You need to update to OFFICIAL 2.3.5 (you were updating to 2.2). You can get it here:http://www.huaweidevice.com/worldwi...=toDownloadFile&flay=software&softid=NDQzNTg=
This is porbably most repetead sentence in this forum and is also written in every ROM thread. Oygen was working beacuse its .32 kernel and the newer ROMs are .35 kernel and need to update to OFFICIAL 2.3.5 before flashing. If you would search a little you would find it in less than a minute.
Here is guide how to root and install recovery on official 2.3.5:
http://forum.xda-developers.com/showthread.php?t=1420728
All the instructions for updating with dload method are in the pdf that is in the zip you downloaded from huawei page.
Click to expand...
Click to collapse
If you had read my post properly you would see I already know. thanks for you unhelpful post.
Also the Huawei link is giving me an Service Temporarily Unavailable message , and has since the other day , if you can upload it somewhere or anybody , I can download it then.
I think the problem is that he has a custom partition layout for the internal emmc, that needs to be reset to the default before installing the update.
look here for instructions:
http://forum.xda-developers.com/showthread.php?t=1112857
dzo said:
I think the problem is that he has a custom partition layout for the internal emmc, that needs to be reset to the default before installing the update.
look here for instructions:
http://forum.xda-developers.com/showthread.php?t=1112857
Click to expand...
Click to collapse
Do I use the return-to-stock partition file or the 1.2G DATA + 1.46G INTERNAL SD file? Thanks
Ok I have tried both return-to-stock partition and 1.2G DATA + 1.46G INTERNAL SD file , I still cant get the internal SD to show on 2 computers.
I really hve no idea now.
The same problem after installing Aurora. Installed 2.3 first. Now can't install official update, just a pinkscreen, nothing happens. All custom ROMs easily installs with CWM.
Sent from my U8800 using xda premium
thank you very much!
confrontation said:
Ok I have tried both return-to-stock partition and 1.2G DATA + 1.46G INTERNAL SD file , I still cant get the internal SD to show on 2 computers.
I really hve no idea now.
Click to expand...
Click to collapse
Dzo is probably right about the partition layout of your internal mmc. But probably you cannot fix it with geno's method. I would suggest you to check this post http://forum.xda-developers.com/showthread.php?t=1579366
Also it seems to me that you have the imei=0 problem when you updated from 2.2.2 to 2.3.5 (no network - battery 1% or 0% are common problems)
And try not to flash different kernel based roms without upgrading/downgrading to the appropriate kernel, as this probably has damaged your phone.
Hope that helps
halman said:
Dzo is probably right about the partition layout of your internal mmc. But probably you cannot fix it with geno's method. I would suggest you to check this post http://forum.xda-developers.com/showthread.php?t=1579366
Also it seems to me that you have the imei=0 problem when you updated from 2.2.2 to 2.3.5 (no network - battery 1% or 0% are common problems)
And try not to flash different kernel based roms without upgrading/downgrading to the appropriate kernel, as this probably has damaged your phone.
Hope that helps
Click to expand...
Click to collapse
Thanks will try after dinner.
the Huawei site would let me download the 2.3.5 ROM , can somebody upload it to or link me to a download? Cheers
confrontation said:
the Huawei site would let me download the 2.3.5 ROM , can somebody upload it to or link me to a download? Cheers
Click to expand...
Click to collapse
Check this post http://forum.xda-developers.com/showthread.php?t=1546883
Well well well , I found my other SD card ( better quality SD card ) and BAM! dload works 1st time.
Thanks for all the help from the people who posted here , I have learnt alot from all this.
Thank you thank you.
Hi everybody,
After I got an imei 0 problem I heard that I need to send it to my local servis and they write it back with no money. But here comes the big problem. I need the original firmware on it but I can't install it. Every time I tried I get install faild warning. I know how to install it. My phone can install every rom with cwm but with the dload I can't. After volume +, - and power combination the installation begins but after 25-30 % it stops. I tried it also in internal sd and external sd.Both doesn't work. Please help me so I can install the firmware and send it to rewrite my imei back.
Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.
cokratex said:
Have you tried different officials, b518, b522, b526 or b528 if the files are corrupted on your version. Or maybe try old froyo versions.
Click to expand...
Click to collapse
I tried everything but as I told before it didn't work. The install starts but after 25-30% it stops.Strange I have no idea to do.If I find the zip form of the firmware it work with cwm to instal it.Thanks anyway...
Get the battery of the phone and install original like you had the battery for power use the usb cable
Sent from my U8800
Try to copy dload folder into internal drive. Maybe it should work.
Sent from my U8800
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Hello,
yesterday i upgraded my x5 u8800 pro from 2.2.2 to 2.3.5 (Kernel V2.6.35.7 and U8800V100R001C00B526G001) after 2-3 tries. After i switched on my phone i noticed that my wifi isn't working. I searched many forums and i saw that other people had the same problem too with v2.3.5. I tried everything but i can't fix it.
Another problem is that i can't upgrade my phone from 2.3.5 to 4.0. After many tries i managed to start the procedure of step 1 (format the sd card put the dload file in and press - + and power on). Most of the times after pressing the 3 buttons AT THE SAME TIME my freaking phone simple opens and asks for my PIN. Any ideas?
Carnaje said:
Hello,
yesterday i upgraded my x5 u8800 pro from 2.2.2 to 2.3.5 (Kernel V2.6.35.7 and U8800V100R001C00B526G001) after 2-3 tries. After i switched on my phone i noticed that my wifi isn't working. I searched many forums and i saw that other people had the same problem too with v2.3.5. I tried everything but i can't fix it.
Another problem is that i can't upgrade my phone from 2.3.5 to 4.0. After many tries i managed to start the procedure of step 1 (format the sd card put the dload file in and press - + and power on). Most of the times after pressing the 3 buttons AT THE SAME TIME my freaking phone simple opens and asks for my PIN. Any ideas?
Click to expand...
Click to collapse
Did you flash Gingerbread overseas? Make sure you flashing the pro one by the way
Sent from my Impulse 4g running vPure Professional CM7.
Somcom3X said:
Did you flash Gingerbread overseas? Make sure you flashing the pro one by the way
Sent from my Impulse 4g running vPure Professional CM7.
Click to expand...
Click to collapse
What do you mean if i flash my Ginderbread overseas? Yes i installed the pro one
Somcom3X said:
Did you flash Gingerbread overseas? Make sure you flashing the pro one by the way
Sent from my Impulse 4g running vPure Professional CM7.
Click to expand...
Click to collapse
Yes i think so.I will check it again. Can i install it again on a v2.3 phone?
Carnaje said:
Yes i think so.I will check it again. Can i install it again on a v2.3 phone?
Click to expand...
Click to collapse
IT is a stock rom.
The same here
Carnaje said:
Hello,
yesterday i upgraded my x5 u8800 pro from 2.2.2 to 2.3.5 (Kernel V2.6.35.7 and U8800V100R001C00B526G001) after 2-3 tries. After i switched on my phone i noticed that my wifi isn't working. I searched many forums and i saw that other people had the same problem too with v2.3.5. I tried everything but i can't fix it.
Another problem is that i can't upgrade my phone from 2.3.5 to 4.0. After many tries i managed to start the procedure of step 1 (format the sd card put the dload file in and press - + and power on). Most of the times after pressing the 3 buttons AT THE SAME TIME my freaking phone simple opens and asks for my PIN. Any ideas?
Click to expand...
Click to collapse
I have the same problem on the same phone. Did you solve your problem, because I would like to use your more then 1 year long searching for the answer. I also at the begining of the search blamed my SD card. I have sleepless nights, but no idea brought me solution of the problem.
Please help me if you can, Bob972.
Not Oversea
As I know , this firmware is not Oversea. Oversea Normal fw is: U8800V100R001C00B521_Oversea_Normal . This happened to me. No WiFi anymore. How could I revert this installation from B526G001 to 2.2.2(stock ROM). From there to 2.3.5 Oversea Normal and then ICS.
The main problem for me is how to return to stock ROM?
Thanks.
bob972 said:
As I know , this firmware is not Oversea. Oversea Normal fw is: U8800V100R001C00B521_Oversea_Normal . This happened to me. No WiFi anymore. How could I revert this installation from B526G001 to 2.2.2(stock ROM). From there to 2.3.5 Oversea Normal and then ICS.
The main problem for me is how to return to stock ROM?
Thanks.
Click to expand...
Click to collapse
did u guys check ur wifi mac adress? go to settings about phone status. if it's 00:00:00:00:00 then u need to change it with a terminal emulator (requires root)
I suceeded
I was warned to choose ROM for 2.3 , which ends with 512. I took ROM
U8800Pro V100R001C00B512G001(Gingerbread) Firmware has to be 512!!!!
The most important advice for me was
Make a “dload” directory on SD card root directory , Copy the “Step 1\
dload\UPDATE.APP” and “Step 1\ dload\UPDATE_g.APP” to SD card
“dload\UPDATE_g.APP[”.
I copied UPDATE.APP to SD card in dload folder but didn't rename the file into UPDATE_g.APP!!!! I didn't understand the instructions corectly.
After that Settings/Storage/Software Upgrade
The next step is without renaming UPDATE.APP.
I didn't need step 3, because I don't speak Chineese.
After that relevation everything went smoothly and problemless.
After that upgrade to 4.0 went ok without any problem.
I did it
Delete this message,.