Hi there,
Just installed the leaked 4.4.2 NA5 firmware on my i9505 and apparently whenever I click the security link in settings app, the settings app force closes. This seems to be a firmware problem. I just want to go there and enable installation of apk's from unknown locations. Anyone know a bypass or a fix?
Waiting for the reply.
gwolfu said:
Hi there,
Just installed the leaked 4.4.2 NA5 firmware on my i9505 and apparently whenever I click the security link in settings app, the settings app force closes. This seems to be a firmware problem. I just want to go there and enable installation of apk's from unknown locations. Anyone know a bypass or a fix?
Waiting for the reply.
Click to expand...
Click to collapse
Is your phone rooted? i can help you solve this problem but im not allowed to post the file because i dont wanna end up breaking the rules so If your phone is rooted Feel free to Pm me and im not 100% sure if this file will work but atleast it work's for me tho . teehee.
gwolfu said:
Hi there,
Just installed the leaked 4.4.2 NA5 firmware on my i9505 and apparently whenever I click the security link in settings app, the settings app force closes. This seems to be a firmware problem. I just want to go there and enable installation of apk's from unknown locations. Anyone know a bypass or a fix?
Waiting for the reply.
Click to expand...
Click to collapse
Did you install complete firmware or just the modem and bootloader? You flashed Foxhound rom right? You'll need to flash complete stock 4.4.2 first wipe before and after flashing then check if everything works and after that you can flash a recovery and you can try to flash Foxhound again.
Be sure to wipe cache, dalvik and factory reset before and after you've flashed Foxhound
Verstuurd vanaf mijn GT-I9505 met Tapatalk
I had exactly the same issue this caused by still having old bootloader (no knox) if your using echoe rom, there is a work around available in the thread.
Sent from my GT-I9505 using xda app-developers app
ranger4740 said:
I had exactly the same issue this caused by still having old bootloader (no knox) if your using echoe rom, there is a work around available in the thread.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Yep for some reason the new bootloader did not flash right
Managed to fix it now by flashing it again
Related
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
bubblebuddyi said:
I've been searching for the stock kernal for at&t users for s bit now, can't find it I'm trying to fix the annoying "updating camera firmware,please wait..." message. Unless there's a better way, I'll just assume you have to flash the sock kernal to update it. But if you flash the sock Kernal, wouldn't the phone fail on boot?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
rcklss1 said:
What ROM are you running? Omega?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
bubblebuddyi said:
No, I'm running Wanamlite v1.0.
I just reinstalled the stock AT&T rom to allow the camera to update, but when I ran the camera, no update appeared. So I figured it was all set. After re-rooting, I re-installed Wanamlite and KT kernal, open up the camera, and sure enough the message re-appears. I didn't perform any wipes. But it looks like I'll have to because all the AT&T bloatware was re-installed again.
Click to expand...
Click to collapse
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Baldilocks said:
Your mistake was reinstalling Wanamlite again. Here's how you install non AT&T ROMs
1. Root your phone. I used the one click TWRP and Loki method.
2. Factory Reset and install custom ROM.
3. Install AT&T kernel. Let it boot up. Open Camera.
4. Reboot to recovery. Install custom kernel. Wipe cache and Dalvik. Fix Permissions.
5. Reboot. All done.
Sent from my Galaxy S4
Click to expand...
Click to collapse
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
bubblebuddyi said:
Thanks, you're right about my mistake lol I ended up just installing someone else's ROM and it works perfectly. I'm a bit lost reading your instructions, It was my understanding that custom ROM's would not load with stock kernel?
Click to expand...
Click to collapse
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Baldilocks said:
You need a carrier kernel for your custom ROM.
Sent from my Galaxy S4
Click to expand...
Click to collapse
can you link to a stock kernel for the AT&T i337?
xxhorseriderxxx said:
can you link to a stock kernel for the AT&T i337?
Click to expand...
Click to collapse
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
highaltitude said:
Exactly, its nice he can recommend installing a stock kernel, but they are not to be found. I asked in another thread and didn't get an answer. I somehow got it to work just wiping and installing Omega 5.0 Then to get wifi to work I installed ktoonez kernel.
Sent from my GT-I9505 converted SGH-I337
Click to expand...
Click to collapse
okay, assuming you're using the AT&T variant, I did this:
I got the looping "installing camera firmware" and tried faux an ktoonsez with no luck
I flashed this tmobile stock kernel and the camera firmware updated successfully by going into the camera app.
I then just flashed faux kernel back and everything worked great.
http://forum.xda-developers.com/showthread.php?t=2271976
I use shabbypenguin's auto loki CWM recovery, but you'll have to definitely flash the loki patch after the tmo kernel to make this work.
http://forum.xda-developers.com/showthread.php?t=2291956
Hey People,
i previously rooted my phone on stock firmware along with changing the kernel. I have no restored and removed root back to stock but i get this message when doing a OTA update as i need the latest update to enable 4G on my phone. It says Your device has been modified. Software updates are not available. How do i go about fixing this? I have done some research and used the triangle app to reset the flash counter which now says Official rather then Custom In download mode? If i flash the firmware does it automatically Re flash my Kernel or is that separate? I have looked for the stock i9505 kernel i Just cant seem to find it.
Will appreciate the help
Thanks
jeezy85 said:
Hey People,
i previously rooted my phone on stock firmware along with changing the kernel. I have no restored and removed root back to stock but i get this message when doing a OTA update as i need the latest update to enable 4G on my phone. It says Your device has been modified. Software updates are not available. How do i go about fixing this? I have done some research and used the triangle app to reset the flash counter which now says Official rather then Custom In download mode? If i flash the firmware does it automatically Re flash my Kernel or is that separate? I have looked for the stock i9505 kernel i Just cant seem to find it.
Will appreciate the help
Thanks
Click to expand...
Click to collapse
flash stock firmware, stock kernel included
It's normal that it says that. Just install Xposed framework, then Wanam Xposed, there is an option to fake the system status as official and thus you'll be able to update firmware OTA.
Sent from my GT-I9500 using Tapatalk 4
samersh72 said:
flash stock firmware, stock kernel included
Click to expand...
Click to collapse
i have flashed stock firmware 2/3 times now doing another 1 as we speak it still says i cannot update ota..
any other ideas what could be causing it to be modified?
Have you ever find a way to fix this?
jeezy85 said:
i have flashed stock firmware 2/3 times now doing another 1 as we speak it still says i cannot update ota..
any other ideas what could be causing it to be modified?
Click to expand...
Click to collapse
then try to update using kies
svd1977 said:
then try to update using kies
Click to expand...
Click to collapse
Thank you for your answer, but unfortunately I can't use Kies since I use Linux and there is no Kies for Linux. May be another solution like adb?
Have u tried factory reset in stock recovery. I had this when I flashed official fw with odin. Was not untill I reset that the prob went away
Sent from my GT-I9505 using xda app-developers app
l8erz said:
Have u tried factory reset in stock recovery. I had this when I flashed official fw with odin. Was not untill I reset that the prob went away
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thank you!
I wiped the data, without success, then I flashed everything again with Heindall 1.4.0, then wiped everything again. Now I have official status and should receive OTA updates.
Edit: but after rooting the official status is lost. Now I think this may be normal.
I have looked but cant find anything that is exactly like my problem...
I was using Omega ROM but wanted to go back to Stock unrooted firmware.
I flashed Stock 4.3 (XXUEMKF to be precise - both Baseband and Build) using Odin 3.04
Now I cant turn wifi on (common problem I believe???)
When I go into Download mode I dont have any KNOX lines and my Binary is Custom not stock!!!
What is the best way to get my baby working..... im in the UK if that makes a difference
Sent from my GT-N7100 using xda app-developers app
extrememonkey said:
I have looked but cant find anything that is exactly like my problem...
I was using Omega ROM but wanted to go back to Stock unrooted firmware.
I flashed Stock 4.3 (XXUEMKF to be precise - both Baseband and Build) using Odin 3.04
Now I cant turn wifi on (common problem I believe???)
When I go into Download mode I dont have any KNOX lines and my Binary is Custom not stock!!!
What is the best way to get my baby working..... im in the UK if that makes a difference
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
You did flash a stock 4.3 and yet you still got no Knox Void warranty in Downloadmode? try to flash the wifi fix on Djembey thread and Do you really need to make another thread regarding this issue?
Mod Edit
Please refer to the XDA RULES about multiple posting
Thread closed
malybru
Forum Moderator
Hi folks!
I upgraded to KK via OTA.
I'm using knox a lot (don't laugh)...
When I tapped to open knox, it starts to install. This is where the problem is. Installation always stuck, randomly at any point. The furthest I got was up to 78% and it just stuck there.
I had cleared the cache partition using the N3 recovery as my phone is not rooted. Same issue.
Also I notice that after upgraded to kitkat, copy n paste doesn't work all the time...
Can anyone shed some light on my Knox n copy paste issue?
Thx in advance
Sent from my SM-N9005 using XDA Premium HD app
Potentially an issue with KNOX on KK, buuuut, I'd hazard a guess you need to do a full wipe as the old JB file system is probably interfering with it, JB + KK have different structures so maybe causing the issue.
Oh dear. .. I always hated full wipe on a stock rom...
Thx for the suggestion though
Sent from my SM-N9005 using XDA Premium HD app
radiikal said:
Hi folks!
I upgraded to KK via OTA.
I'm using knox a lot (don't laugh)...
When I tapped to open knox, it starts to install. This is where the problem is. Installation always stuck, randomly at any point. The furthest I got was up to 78% and it just stuck there.
I had cleared the cache partition using the N3 recovery as my phone is not rooted. Same issue.
Also I notice that after upgraded to kitkat, copy n paste doesn't work all the time...
Can anyone shed some light on my Knox n copy paste issue?
Thx in advance
Sent from my SM-N9005 using XDA Premium HD app
Click to expand...
Click to collapse
Hi, I too have exactly the same problem and it happened after I downloaded the latest updates released by Samsung for Note 3 (KK) in India. I am a regular KNOX user. I have dropped a support query to Samsung. Let me see what response I get.
It is surprising to see that there is no way to re-download and re-install the KNOX apk. Googlling only gives you ways to uninstall KNOX
I wish there is a way out without factory reset.
radiikal said:
Oh dear. .. I always hated full wipe on a stock rom...
Thx for the suggestion though
Sent from my SM-N9005 using XDA Premium HD app
Click to expand...
Click to collapse
U r lucky can get into home screen after update without full wipe.
I tried so, 3 times reflash the kk. No change. Till I have to do the thing I hate...... FULL WIPE!
And finally I go in home screen after few initial loading setup account.
Sent from N9005 4.4.2 NB7 rooted device
Hi,
Had the same issue and fixed it without the wipe. All I did was to go to app settings and clear the cache of knox installer app. After the reboot knox updated successfuly.
antique_sonic said:
U r lucky can get into home screen after update without full wipe.
I tried so, 3 times reflash the kk. No change. Till I have to do the thing I hate...... FULL WIPE!
And finally I go in home screen after few initial loading setup account.
Sent from N9005 4.4.2 NB7 rooted device
Click to expand...
Click to collapse
Hii all, i have a I9505 where i must go back from 4.4.2 to 4.2.2. I know this is no simple cause bootloader is locked but i listen someone have modified the stock rom for fix the bootloader problem. Someone have this rom allredy cooked? I hope you can solve this
I would need this hack too. There is a mayor sound problem with bluetototh on 4.3 and 4.4.2.
On 4.2.2 there was no problem, so will be very good to possible downgrade
Sent from my GT-I9505G using XDA Free mobile app
maybe if we are more people asking the same thing someone will care us
This will never happen. No developer is interested in downgrading their firmware to 4.2.2.
What you could try is to find an old custom 4.2.2. rom and flash that on your phone. Maybe it works and maybe it doesn't.
I found old 4.2.2 but the wifi isnt working. I am noob in modem versions
Sent from my GT-I9505G using XDA Free mobile app
46rossi46 said:
I found old 4.2.2 but the wifi isnt working. I am noob in modem versions
Sent from my GT-I9505G using XDA Free mobile app
Click to expand...
Click to collapse
Try flashing the KT-SGS4 kernel kernel and let me know if that fixes the WiFi.
Thanks for reply. Will test tomorrow and let you know the info.
Sent from my GT-I9505G using XDA Free mobile app
46rossi46 said:
I found old 4.2.2 but the wifi isnt working. I am noob in modem versions
Sent from my GT-I9505G using XDA Free mobile app
Click to expand...
Click to collapse
you downgraded to stock 4.2.2? Cause i get the bootloader error in odin everytime, i can only downgrade via the Aroma revolution HD custom rom by phyl recovery but when i check the firmware version it show me again the 4.4.2 version.
oh'neill said:
you downgraded to stock 4.2.2? Cause i get the bootloader error in odin everytime, i can only downgrade via the Aroma revolution HD custom rom by phyl recovery but when i check the firmware version it show me again the 4.4.2 version.
Click to expand...
Click to collapse
You can't downgrade stock 4.2.2. You can only try to downgrade with a custom rom.
Lennyz1988 said:
You can't downgrade stock 4.2.2. You can only try to downgrade with a custom rom.
Click to expand...
Click to collapse
right but modem-firmware version will remain that of 4.4 the same when downgrade to 4.2
Hi.
Finally managed to test. I installed prerooted stock 4.2.2 via custom recovery. Then installed mobile odin and via this installed official stock 4.2.2. After that installed kernel link from upper posts and wifi (and everything else) works perfect. The only thing i need to do is reset counter with triangle away. It does not restart counter. It goes ok with reboot and confirm resetting, but when i check the counter still persist custom binary. If anyone can suggest me what to it would be perfect.
Later tonight i will post links which firmwares i installed.