Related
While trying ti install CM 11 from TWRP i managed to brick the phone. I dont want to waste time sharing the details unless it's need to solve the problem. The main thing is that my phone is now stuck at the LG logo. Previously i was running the CM 10.2 Stable Build.
How can i get back to working condition? Either CM or Genuine LG Rom, I just want my phone to be up and running.
Please Help. I am really scared at this moment.
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
muEcke* said:
You don't share any details so I have to guess...
Enter recovery like this http://www.youtube.com/watch?v=ifi-ArGeTzQ , restore your Backup or flash another ROM, done.
Click to expand...
Click to collapse
I can enter both the modes shown in the video.
The thing is i was running CM 10.2 with a TWRP installed of version 2.6.3.2. I downloaded the CM 11 and went into TWRp to flash it but it couldnt flash the CM11. Then after searching the net i found out that TWRP 2.6.3.3 or higher is required to install CM11. The problem is that i wiped my dalvic, data, cache and system and did not keep a backup. So when the Cm11 wont install i was stuck in the TWRP as i didn not have the 10.2 rom file in the phone.
Then downloaded the TWRP 2.6.3.3 and also a CWM zip (just in case). Using ADB i tried to update the TWRM but still some other error shows up. Tried installing the CWm still some error shows up. i tried installing again and this time the recovery asked me to install superuser (though i was rooted). I selected YES and after that i am boot looping in the lg logo.
Anyways thats basically what happened. Now how do i get further and make my phone work again?
Please help brother. I am in deep trouble.
Thank You
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
muEcke* said:
Man... always keep a backup, you know, just in case
Shouldn't be a problem at all. You have ADB access right? So here is TWRP 2.6.3.4 those are flashable ZIPs.
Push the file, flash with recovery, reboot to recovery again and you should be on 2.6.3.4. Then flash CM11 and you are good to go...
http://forum.xda-developers.com/showthread.php?t=2469995
Click to expand...
Click to collapse
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
in_core said:
But I am stuck in the LG logo now as i mentioned. I cannot access custom recovery mode (as in TWRP).
Click to expand...
Click to collapse
So you can't enter the recovery like shown in the video? And the command adb reboot recovery doesn't work either?
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
hellot1M said:
At this point your only option is to return back to stock and start over but with a recovery from the link I provided in the other thread.
http://forum.xda-developers.com/showthread.php?t=2432476
LG G2 Stock Firmware (Go Back to Stock)
Follow the instructions in this thread
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Ok then i will follow this process and hopefully be successful in getting my phone up and running.
Thanks for the help. Downloading 2Gb will take some time. So will post the result tomorrow.
Regarding rooting and installing custom recovery again, i will do that later. For now i just want my phone alive.
Anyways Thanks again everyone for the helpful information
Try getting to download mode right now. Because if you can't get to download mode you can't use the back to stock method
from my Note Thrizzle
Thanks everyone for the help and support. I have successfully reverted back to Stock LG Firmware.
I have some questions.
1. Do i have root access anymore?
2. Is my previous custom recovery still in my system?
3. If no for both then please help me with the appropriate article to root, install custom recovery and then install CM11, as my previous recovery was not able to install CM 11.
Thank You
Hi all
this summer i've rooted the g2 d802 with autorec i've installed the twrp 2.7 and installed cm12, when 12.1 come out i've just wiped all and flashed the new rom, now everything go fine, but i'd like to try the newer version ^^
i've read some stuff but i'm a newbie, so i'm pretty confused, correct me if i'm wrong
with autorec i've downgraded the bootloader to JB version so i cant install the CM13
i should:
1)update to the latest twrp BUMPED
2)than go to recovery and flash the lastes bootstack
3)reboot to recovery
4)flash the CM13
can i update the 2.7 twrp to the latest one if the older isnt bumped? and how can i update it? i just have to flash it from the older twrp or should i use flashify or something like that?
let me know if the procedure is correct thanks for the help
You need to update the bootloader & I recommend the latest TWRP. Then you're good to go. Going from Lollipop -> Marshmellow isn't as smooth as an incremental Lollipop -> Lollipop update.
Do create a TWRP image backup & titanium application backup beforehand.
I've tried Marshmellow, but AICP Lollipop has much better performance, more features, far more stable & comparable battery life when using servicely. It's still a work in progress.
niubboxp said:
Hi all
this summer i've rooted the g2 d802 with autorec i've installed the twrp 2.7 and installed cm12, when 12.1 come out i've just wiped all and flashed the new rom, now everything go fine, but i'd like to try the newer version ^^
i've read some stuff but i'm a newbie, so i'm pretty confused, correct me if i'm wrong
with autorec i've downgraded the bootloader to JB version so i cant install the CM13
i should:
1)update to the latest twrp BUMPED
2)than go to recovery and flash the lastes bootstack
3)reboot to recovery
4)flash the CM13
can i update the 2.7 twrp to the latest one if the older isnt bumped? and how can i update it? i just have to flash it from the older twrp or should i use flashify or something like that?
let me know if the procedure is correct thanks for the help
Click to expand...
Click to collapse
blastagator twrp 2.8.7.3 reboot into recovery from recovery......then hybridbootstacks again reboot into recovery from recovery the nfals rom and gapps.
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
@Turbine1991
is better update bootstack then recovery? or viceversa?
how can i backup my 2.7 twrp? (or if something going wrong with lastes bumped twrp and new bootstack can i flash back 12.1?)
@raptorddd
i read somewere i need at least twrp 2.8.4 for install new twrp recovery from the older recovery, is wrong? can i instal the 2.8.7.3 bumped from the normal 2.7?
niubboxp said:
@Turbine1991
is better update bootstack then recovery? or viceversa?
how can i backup my 2.7 twrp? (or if something going wrong with lastes bumped twrp and new bootstack can i flash back 12.1?)
@raptorddd
i read somewere i need at least twrp 2.8.4 for install new twrp recovery from the older recovery, is wrong? can i instal the 2.8.7.3 bumped from the normal 2.7?
Click to expand...
Click to collapse
First flash recovery once flashed it wont get deleted unless you change recovery or go back to stock. so blastagator latest recovery.. install blastagator then reboot into recovey from recovery. then flash bootstacks,again reboot to recovery from recovery and flash rom gapss. am not sure i dont think it matters wich recovery you use . as long a you have a custom recovery twrp or cwm you flash newst. and itll stay there unless you restore to stock then you loose recovery.
Sorry but i didnt understood, i already have the 2.7, when i go into recovery can i flash the blastagator or i have to flash something else before?
niubboxp said:
Sorry but i didnt understood, i already have the 2.7, when i go into recovery can i flash the blastagator or i have to flash something else before?
Click to expand...
Click to collapse
just flash balstagators twrp and you done. see on top part of screen theres the twrp version number. reboot into recovery so you will be on blastagators recovery.. and you done.. for bootstacks do the same reboot into recovery once you flashed boostacks once you in twrp and copy rom then flash
I can flash the blasstgator inside the older twrp or i need flashify or adb? Did u tryed?
niubboxp said:
I can flash the blasstgator inside the older twrp or i need flashify or adb? Did u tryed?
Click to expand...
Click to collapse
you can flash new twrp inside twrp. to take effect just dont reboot to system choose recovery and check that it says 2.8.7.3 i do it like that. but you say something about using older twrp that you cant install new, that i dont know. mine i used auto rec and gave me 2 earlier versions so i just flashed blastagator.. nothing can happen if you flash twrp inside twrp you just updating.. but reboo into recovery and make sure it says 2.8.7.3 on top and youre done.
raptorddd said:
you can flash new twrp inside twrp. to take effect just dont reboot to system choose recovery and check that it says 2.8.7.3 i do it like that. but you say something about using older twrp that you cant install new, that i dont know. mine i used auto rec and gave me 2 earlier versions so i just flashed blastagator.. nothing can happen if you flash twrp inside twrp you just updating.. but reboo into recovery and make sure it says 2.8.7.3 on top and youre done.
Click to expand...
Click to collapse
Thanks
i've flashed the new twrp and is all ok, i've also flashed the D802 5.0.2 Bootstack with KitKat (Bump) bootloader
but i've read somewhere with kk bootloader the key for enter in recovery is power+vol down than vol- +vol up, but i still enter in recovery with the old combo, how can i verify my bootstack version? when i flashed it everything gone fine
niubboxp said:
i've flashed the new twrp and is all ok, i've also flashed the D802 5.0.2 Bootstack with KitKat (Bump) bootloader
but i've read somewhere with kk bootloader the key for enter in recovery is power+vol down than vol- +vol up, but i still enter in recovery with the old combo, how can i verify my bootstack version? when i flashed it everything gone fine
Click to expand...
Click to collapse
i dont know, but as long as it said succesful in blue letters then you have it..
Well Marshmallow would boot if it did.
I installed the twrp 3.0.2.2 and after installed a kernel which made the phone stuck on zte logo.
I tried to flash to the stock files using this guide:
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but when i try to install the superSu the twrp stuck after extracing files, then the phone just shuts down.
what can I do?
Shakedbuk said:
I installed the twrp 3.0.2.2 and after installed a kernel which made the phone stuck on zte logo.
I tried to flash to the stock files using this guide:
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but when i try to install the superSu the twrp stuck after extracing files, then the phone just shuts down.
what can I do?
Click to expand...
Click to collapse
Update your twrp, there's no need to use that old version... my phone reboots when it wants when it has opd twrp versions
Download twrp 3.1.1-0
Put it on your phone, maybe via adb or through mtp if you have it
Go to Install -> hit the button on the right that says 'Install image'
Find the TWRP.img and install it, it will prompt you where to install it, put 'recovery'
Followed you instructions, but now i cant get into TWRP or the OS ):
Tried to flash it with axon7tool on pc, but got the same result, but when I tried to flash the 3.0.2. again, it worked.
Shakedbuk said:
Followed you instructions, but now i cant get into TWRP or the OS ):
Tried to flash it with axon7tool on pc, but got the same result, but when I tried to flash the 3.0.2. again, it worked.
Click to expand...
Click to collapse
Don't use axon7tool for this... you already have TWRP, the only thing you have to use axon7tool for is to install twrp when you have the stock recovery. after you have twrp on the phone just try not to use the PC except for maybe miflash
I tried both of this options.
Flashing new version of twrp through the old twrp resulted in black screen when i try to get to recovery.
So I flashed the old twrp from the pc, tried to flash the new one using the same method but it the same as i flashed it through the old twrp. (which mean that when i get to the recovery i get black screen)
ATM the situation is the same, system wont boot stuck on zte logo, twrp is 3.0.2.2 (there is another method to flash newer twrp?)
There is another option?
After wiping system in twrp i was able to install supersu, which means i completed this guide
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but still stuck on zte logo after i reboot , any help?
Shakedbuk said:
After wiping system in twrp i was able to install supersu, which means i completed this guide
https://forum.xda-developers.com/axon-7/how-to/a2017g-nougat-b08-twrp-bootstack-t3696479v
but still stuck on zte logo after i reboot , any help?
Click to expand...
Click to collapse
Wait, what did you do? Did you install everything again after wiping system?
Ya, afte i wiped the system it allowed me to install the supersu without interrupts, but it did not helped.
Anyway i manged to install purefusion os, system booted up, after that the new twrp updated successfully.
Shakedbuk said:
Ya, afte i wiped the system it allowed me to install the supersu without interrupts, but it did not helped.
Anyway i manged to install purefusion os, system booted up, after that the new twrp updated successfully.
Click to expand...
Click to collapse
You installed SuperSU without a system, and the phone did not boot up? Amirite?
what i did was wipe system dalvik cache, cache, after that install bootstack and the system files, and after that the supersu.
before i wiped the system, when i tried to install the supersu the twrp collapsed, after that it installed it but did not helped to make the system boot.
Hey guys...I'm runnin codeworksx TWRP 3.1.1-0 for the s2( but i have an s3), and I've been trying to fastboot the 3.2.1-1 TWRP by codeworkx but can't get it to take without partition problems. Is there any way to install this updated recovery without going back to stock recovery? Thanks for anyones HELP. Update: I found a way, Flashify App worked perfectly.
rt5mz7 said:
Hey guys...I'm runnin codeworksx TWRP 3.1.1-0 for the s2( but i have an s3), and I've been trying to fastboot the 3.2.1-1 TWRP by codeworkx but can't get it to take without partition problems. Is there any way to install this updated recovery without going back to stock recovery? Thanks for anyones HELP. Update: I found a way, Flashify App worked perfectly.
Click to expand...
Click to collapse
If you can boot to TWRP, you can flash an IMG (not the default ZIP) file, where you select the zip just swap to image..
No need for an extra application.
JamBax said:
If you can boot to TWRP, you can flash an IMG (not the default ZIP) file, where you select the zip just swap to image..
No need for an extra application.
Click to expand...
Click to collapse
Thanks for getting back on that.
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...