I've got CWM recovery installed on my VZW G2 as I wanted to install the latest Gummy 4.4 based ROM. Now I'd like to switch back to TWRP. Can I just go into CWM and flash the TWRP2.6.3.3recovery.zip file? Or do I have to do something different? Any help/advice is greatly appreciated!
The way I've been doing it is to boot into whatever ROM I have installed, and do it from a terminal there (su and loki_flash the other recovery). I don't see why your method wouldn't work; mine might be a little safer since it doesn't modify the recovery while you're in recovery mode.
scheirere said:
I've got CWM recovery installed on my VZW G2 as I wanted to install the latest Gummy 4.4 based ROM. Now I'd like to switch back to TWRP. Can I just go into CWM and flash the TWRP2.6.3.3recovery.zip file? Or do I have to do something different? Any help/advice is greatly appreciated!
Click to expand...
Click to collapse
I switched from CWM to TWRP and just reflashed the zip. I am assuming recovery gets loaded into memory allowing you to overwrite the contents of the recovery partition.
Cool, cool!! I'm off to give it a try.......reflashing the zip file that is.
Thanks again guys!!
Flashing Recovery
I've gone back and forth between TWRP and Philz Touch by simply flashing the zip and rebooting recovery. Personally, I prefer Philz but it does not work well with the latest PA4
Hi i make the mistake of erasing all partitions without backup in philz touch recovery on my lg d803 and now im i can just go in recovery..i flashed twrp 2.6.3.2 and now the phone boot only in twrp..no download mode no rom i flashed a lot of roms but always boot in twrp ..help plz i have no idea what to do ..i can do adb commands...tanxs in advance.
demon66678 said:
Hi i make the mistake of erasing all partitions without backup in philz touch recovery on my lg d803 and now im i can just go in recovery..i flashed twrp 2.6.3.2 and now the phone boot only in twrp..no download mode no rom i flashed a lot of roms but always boot in twrp ..help plz i have no idea what to do ..i can do adb commands...tanxs in advance.
Click to expand...
Click to collapse
If you have ADB access, you are in a good spot.
You'll have to ADB sidelaod a ROM, and flash it. shouldn't be hard to find info on.
Good luck.
congratulations for not saying your bricked.
you probably get an error when flashing right ?!
you need a newer version of twrp... get a flashable zip and update itself in twrp. then you will be able to flash roms.
Yep. darkobas is correct.
I missed your TWRP version. find 2.6.3.3 push it (I mistakenly said sideload above) and a ROM to your 'SDcard', then flash TWRP, restart to recovery, and flash ROM (and any other required packages (Gapps, system patch, etc).
adb push path/filename /sdcard/filename
re
CxanDroid said:
Yep. darkobas is correct.
I missed your TWRP version. find 2.6.3.3 push it (I mistakenly said sideload above) and a ROM to your 'SDcard', then flash TWRP, restart to recovery, and flash ROM (and any other required packages (Gapps, system patch, etc).
adb push path/filename /sdcard/filename
Click to expand...
Click to collapse
sorry but i try it and no matter what the phone is always restarting in twrp no download mode no system no nothing everytime rebooting in recovery twrp 2.6.3.3
So.... Twrp is fine... Flash a rom now
Sent from my LG-D802 using Tapatalk
I wanna go to the RR MM version ROM for Zenfone 5, but fewmsome days before I decide to do it, my microusb got some kind of bug, anyway, it doesn't connect to pc (I tried everything). So, in the tutorial says to flash the new recovery made by them, but i don't have how to connect it on pc to flash the new TWRP recovery, but I have a funcional system working (the stock .87 version from asus) and I want to know if there's a way that I can flash the recovery without using pc (once that my microusb jack is f*kd). I saw in other forum that "recovery.img" is inside the /factory partition, so apps like Flashify cannot read and write on it. Just droidboot can do that. So this is what I want to know, of there's a way to flash the recovery trough the booted Android and if I can make a script to Droidboot run. (Of course, all of them without pc). Or even if I can flash RRMM on my current twrp version (2.8.7.0)
Thanks xda.
Try to flash it via TWRP 2.8.7.0
"Error flashing image, no partition specified".
Twrp actually doesn't show any partitions to install the image.
MarconiGRF said:
"Error flashing image, no partition specified".
Twrp actually doesn't show any partitions to install the image.
Click to expand...
Click to collapse
I provided flashable zip for my RR MM rom. So you shoudl just choose zip archvie with rom to flash it.
It is not a image.
tank0412 said:
I provided flashable zip for my RR MM rom. So you shoudl just choose zip archvie with rom to flash it.
It is not a image.
Click to expand...
Click to collapse
Oh, I read your post again, i'll try to flash with twrp 2.8.7.0
Sucessful installing ROM, really fast and battery management. Thx
Sorry for my wrong English
I am currently on stock miui 10.3.6.0 .I have unlocked the bootloader,Installed TWRP recovery & rooted my device with magisk.Now i am unable to get the latest miui 10.3.7.0 update.!
Is there any way in whick i can update my device to latest miui rom?
If there please help me.
I am not finding any link which is helping me.
I downloaded latest miui recovery rom from here but unfortunately there is an error i.e flash all.bat is missing in xiaomiflashtool.Tried to flash the same rom through TWRP but there again is an error i.e compatibility zip missing.
a download link to miui 10.3.7.0 fastboot rom will be appreciated.please help
Thanks in advance
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
darhma said:
Look here: https://forum.xda-developers.com/redmi-note-7/help/ota-update-unlocked-rooted-device-t3963409/page2
Download the full recovery rom from here: https://xiaomifirmwareupdater.com/miui/
Click to expand...
Click to collapse
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
ChandrakantBelell said:
Thanks very much it helped. I have downloaded fastboot Rom and flashed it. I have another big issue,after flashing 10.3.7.0 update I got miui stock recovery Installed so I again.
Flashed twrp from fastboot.
Then format data.
Flash magisk.
And reboot.
But after successful reboot and setup when I choose to use pattern or pin or password as authentication.The device is not recognizing my correct pin or password.It says password incorrect. Please help I am not finding any solution for this.
What is the correct pattern to install recovery to successful magisk install.
Thanks
Click to expand...
Click to collapse
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
darhma said:
Why did you used fastboot rom instead of the recovery rom? This way you didn't update the rom but reinstalled it. So I think that the only way to get rid of the password request is to format data partition from recovery and then install magisk. Next time you have to update you have to download the RECOVERY rom, dirty flash it and flash magisk before rebooting to system.
Click to expand...
Click to collapse
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
ChandrakantBelell said:
Ok thanku.So now i have to flash TWRP recovery.then boot into recovery wipe data then install magisk right? Is there any other zip to flash? What is vm verity zip? I have to flash that also?
Click to expand...
Click to collapse
You have to flash twrp reboot to recovery if it asks for a password format data then install magisk. Vbmeta is needed just when you change rom from miui to aosp, so in this case you don't need it
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP
Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine
houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:
Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.
ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.
RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.
zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system
frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself
I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...