HI SUP GUYS
MY PHONE LG OPTIMUS L5 II E460 HAVE MANY PROBLEMS:
1- REBOOT ITSELF AND FREEZE
2- MESSAGE LIKE THIS: SORRY! Unfortunately HOME, OR GOOGLE PLAY, OR SETTING , OR ANY THING ...STOP WORK
3- I FLASH MY PHONE WITH LATEST FLASH V10D_00.kdz ALL OK BUT THE DIGITAL TOUCH STOP WORK
PLEASE TELL ME WHAT CAN I DO FOR MY STUPID PHONE.
MHO _ TCOM said:
HI SUP GUYS
MY PHONE LG OPTIMUS L5 II E460 HAVE MANY PROBLEMS:
1- REBOOT ITSELF AND FREEZE
2- MESSAGE LIKE THIS: SORRY! Unfortunately HOME, OR GOOGLE PLAY, OR SETTING , OR ANY THING ...STOP WORK
3- I FLASH MY PHONE WITH LATEST FLASH V10D_00.kdz ALL OK BUT THE DIGITAL TOUCH STOP WORK
PLEASE TELL ME WHAT CAN I DO FOR MY STUPID PHONE.
Click to expand...
Click to collapse
switch off your phone
when lg logo appear press VOL- HOME POWER for some seconds
an android logo will appear and your phone will be resetted
if you change the firmware an hard reset is high reccomend!
if not work tell me
AXD96 said:
switch off your phone
when lg logo appear press VOL- HOME POWER for some seconds
an android logo will appear and your phone will be resetted
if you change the firmware an hard reset is high reccomend!
if not work tell me
Click to expand...
Click to collapse
thanks man but not work and my touch screen not work
whats the problem sorry for my bad English
MHO _ TCOM said:
thanks man but not work and my touch screen not work
whats the problem sorry for my bad English
Click to expand...
Click to collapse
maybe you flashed a bad kernel or other
connect your phone to your pc and flash a firmware.kdz
you find them on lg-phone-firmware
axd96 said:
maybe you flashed a bad kernel or other
connect your phone to your pc and flash a firmware.kdz
you find them on lg-phone-firmware
Click to expand...
Click to collapse
i cant flash him because pc cant connect my phone cant find him and my phone stock in setup wizard and i cant skip or active usb debug any solution...
MHO _ TCOM said:
i cant flash him because pc cant connect my phone cant find him and my phone stock in setup wizard and i cant skip or active usb debug any solution...
Click to expand...
Click to collapse
download kdz and open it
switch off your phone and remove battery/sim/microsd press vol- (or both vol button) and connect your phone to the pc throught the usb(if not find the phone continue pressing the volume while connecting the usb)
in kdz set type: 3gqct and phone mode: DIAG, if not find the phone try EMERGENCY or CS_EMERGENCY and select the firmware.kdz
Download kdz_updater from here
http://dl.xda-developers.com/attach...f356422/52fa8004/4/2/0/5/4/5/KDZ_FW_UPD_EN.7z
Download the CORRECT firmware from here
http://lg-phone-firmware.com/index.php?id_mod=23
:good::good::good:
AXD96 said:
download kdz and open it
switch off your phone and remove battery/sim/microsd press vol- (or both vol button) and connect your phone to the pc throught the usb(if not find the phone continue pressing the volume while connecting the usb)
in kdz set type: 3gqct and phone mode: DIAG, if not find the phone try EMERGENCY or CS_EMERGENCY and select the firmware.kdz
Download kdz_updater from here
http://dl.xda-developers.com/attach...f356422/52fa8004/4/2/0/5/4/5/KDZ_FW_UPD_EN.7z
Download the CORRECT firmware from here
http://lg-phone-firmware.com/index.php?id_mod=23
:good::good::good:
Click to expand...
Click to collapse
nothing work man the pc cant find my phone i think the digital touch screen corrupt does not work any other solution please atapetk me, my friend.
hi man i flash him but the touch screen still not work i send him to repair but the message still : SORRY! Unfortunately HOME, OR GOOGLE PLAY, OR SETTING , OR ANY THING ...STOP WORK???????
Some people have the same problem and some solutions here:http://forum.xda-developers.com/showthread.php?t=2394283
Related
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Marke321 said:
hello all, i want to flash my lg l7 and i cant go to emergency mode :crying:
i pressed volume up + power button but nothing it just vibrates NO SIGN OF EMERGENCY MODE! please help me ,thank you!
Click to expand...
Click to collapse
ive managed to enter to emergency mode but now after reset phone step im getting error :WParam : 100 LParam : 2 and nothing... please help!
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Poland_Developers said:
Then try launch software with type 3GQCT and phone mode CS emergency. Next, connect phone via cable usb without battery. Maybe reinstall kdz and drivers.
Click to expand...
Click to collapse
ok , i will try it thanks
Marke321 said:
ok , i will try it thanks
Click to expand...
Click to collapse
doesnt work....
What version had you? ICS or JB?
Poland_Developers said:
What version had you? ICS or JB?
Click to expand...
Click to collapse
Ok first i had ICS then i got jb cm10 it worked normally for couple days ,but when ive downloaded chainfire 3D and installed drivers it doesnt boot! then ive tryed to flash it
**** IT! same error.... now i will try different version of kernel.
I have lg l7 p705 and same problem i stuck on EMERGANCE MODE
If you currently have a Jelly Bean then install Jelly Bean.
Uninstall KDZ Flash Tool + drivers and install again.
1.Install drivers.
2.Install KDZ Flash Tool.
3.Turn off your phone. Connect phone via cable USB and pressing volume + and power (without battery). On screen shows emergency mode with yellow background.
4.Open KDZ and:
a) 3GQCT + EMERGENCY
b) 3GQCT + CS EMERGENCY
Disaster recovery software for LGMobile Support Tool rather not work. But you can check it.
If you have P705 then install for P705:
-Hong Kong or Taiwan: http://lg-phone-firmware.com/index.php?id_mod=13
thanks i will try it
it doesnt work , please help, im losing hope
Hi,
try this it worked for me:
turn the phone off
remove battery
press "volume up"
connect to PC via USB
this is the only way to enbale emergency mode which worked for me
Adam
plenty guides on how to unbrick
Including this one :
Marke321 said:
it doesnt work , please help, im losing hope
Click to expand...
Click to collapse
THIS GUIDE IS FOR UN-BRICKING ALL KNOWN TO ME LG Lx PHONES ON WINDOWS BASED COMPUTERS
(Virtual Machine Will Work )
THIS GUIDE ASSUMES YOU HAVE DRIVERS INSTALLED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE KDZ UPDATE PROGRAM
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
THIS GUIDE ASSUMES YOU HAVE .kdz FIRMWARE DOWNLOADED
>>>>>FOUND HERE IF YOU CAN'T USE GOOGLE<<<<<
1. Plug USB cable to PC
2. Take battery out of phone
3. Press and hold VOL- button
4. Plug USB cable to phone
5. Wait few seconds ... (it should display "Download Mode" on black screen)
6. Put battery back in phone
7. UPDATE YOUR KDZ NOW
8. navigate to phone settings and security and preform wipe/master reset (not obligatory but ensures "clean rom" )
Enjoy your NEW OLD phone
found here http://forum.xda-developers.com/showpost.php?p=52241564&postcount=19
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
why are you trying to enter emergency mode ?
TonyMatt said:
i researched on xda and the whole google articles but found no post as this....
i literally cant enter into lg's emergency mode.. tired many methods and button combination no use...
tried to use kdz but device not found...
neither when i connect i get to hear the new hardware sound
plz help if u can..!!!:crying:
Click to expand...
Click to collapse
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
lokopol said:
1.-uninstall the drivers and programs lg l7 on your pc.
restart your pc, and reinstall all programs and drives
for your pc to recognize the phone.
2.-remove the battery, press the power button and volume + and connect the phone to the pc, buttons go into emergency mode
Try this a few times.
you may need to perform step 2 more times
Click to expand...
Click to collapse
i did try it many times till date havent succeeded...
IGGYVIP said:
what are you trying to do with your phone to begin with ?
what system are you running on your pc ?
assuming its windows
do what he said and then see if any unknown devices (or with yellow triangle) in device manager.
post results
details ...
Click to expand...
Click to collapse
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
TonyMatt said:
i was running the stock version rooted on my phone.. i was doing a shutdown procedure to complete 2nd partitions script mounting. after shutting it down my phone never started. dats y i tried getting into the emergency mode to flash stock rom if in case of soft brick..
im using win7 and stock rom on my phone. moreover on connection with my computer it doesnt recognize my phone now...
Click to expand...
Click to collapse
is your phone in bootloop ? or does it display blank screen ? (black or white)
did you try to remove sdcard ?
did you try to hard-reset ?
can you try to remove anything related to lg from your pc ? (all programs and drivers)
do you have qmemo button on top of volume buttons ? you can try to enter safe mode (most scripts will not work in this mode so you might get lucky)
@TonyMatt
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
AppY.fTw.wOw^ said:
Hello!
I Tried To Install A Custom ROM But After Its Successful Installation Using CWM When I Rebooted The Fone it didnt booted!
No Key Combinations Work ETC!
But When I Connect it to the pc i hear a sound on windows!
I Also Checked On Device Manager IT Shows Some LGE AndroidNet USb Serial Port(COM15)
Please Help Me! I Don't Wanna Go To The Service Center!
I Bought The Device Like 2 Or 3 years Ago I Don't Remember And Also The Device Is Rooted So Warranty Is Void. Please
Click to expand...
Click to collapse
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
need4steer said:
I no longer use this device, so I'm not aware if other users had the same issue like you.
First, did you try searching this forum for similar issues?
If not, it might be a better good place to start.
Second, please explain better whats happening to your phone:
Can you turn it on? If you can, what do you see?
Can you enter recovery mode? (volume down + home + power)
Can you enter emergency mode? (volume up + volume down + power)
Did you try flashing stock firmware with KDZ-flasher?
What ROM did you try to install? Did you check the ROM's page in these forum?
Click to expand...
Click to collapse
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
AppY.fTw.wOw^ said:
Hello Bro,
When I Try To Turn It On It Vibrates
I Tried To Enter The Recovery Mode But When I Try To Do The Capacative Touch Buttons Light Up For A Second OR Two, The Device Vibrates And Then Again Dead!
Cant Enter Emergency Mode Same Thing Happens Above There ^
Tried To Flash Using KDZ But Device Was Not Found!
I Tried To Install iPhonoid Rom From http://theunlockr.com/roms/android-roms/lg-roms/lg-optimus-l3-e400-roms/
Also When I Try To Connect The Device Through USB I Hear The Sound But It Fails To Install 1 Driver! (USB MTP Device)
When I checked using adb in cmd by the command
Code:
adb devices
i get the list of devices attached and it shows my device there!
Thanks!
Click to expand...
Click to collapse
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
need4steer said:
It's very problematic that you can't enter your device into emergency mode.
I think the only option that is left regarding software is to uninstall all of the drivers that are already installed for you device,
installing the latest drivers from the official site, and then try to use LG Mobile Support Tool to flash stock firmware.
Other than that you can only send it for a hardware repair
Click to expand...
Click to collapse
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
kien_vip said:
your device not die yet, try use LG support tool again, when it stuck at 4% or above, reboot your phone while plugging in computer. after that, hope it continue processing. this had worked with my fiend's phone
Click to expand...
Click to collapse
tnx for the reply ill give it a try :good:
btw how to i reboot? using the power button??
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
AppY.fTw.wOw^ said:
Bro i Tried To Use LG Mobile Support Tool And In Downloading Mode (Remove Battery>Press And Hold Volume Down Button>Plug In USB) It Gets Recognized (Only In Downloading Mode) And Shows The The Device LG E400 Has The Latest Software Installed V20A. When I Try To Use Update Recovery It Downloads A File Of 166.76 MB And Then Starts Installing it But It Gets Stucks @ 4 % For 5-10 Mins And Then The Tool Asks Me To Replug USB Etc And Then Retry But Same Thing Happens!
In Downloading Mode The Device Is Also Recognized By KDZ Updater But While Flashing A Stock Rom I Get An Error Of wParam And lParam!
Please Help!
Thanks
Click to expand...
Click to collapse
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
AppY.fTw.wOw^ said:
Hey Bros!
I Found That In LG Support Tool It Says The In The Phone The Software Version Installed Is V20A
But There Is No Such Software Version For The Device L3 In LG Firmware Download Page!
But There Is One For LG Optimus L5
So I Guess That I Installed The Rom For L5 To L3 And It Is Bricked Now So Any Solution? o:
Thanks
Click to expand...
Click to collapse
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
need4steer said:
When saying download mode you're referring to emergency mode?
Do you see in your phone that you're in emergency mode?
Maybe try what @kien_vip suggested.
And maybe try flashing the right stock version with KDZ-flasher.
Click to expand...
Click to collapse
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
AppY.fTw.wOw^ said:
Hey,
When i say download mode i mean (Remove Back Cover and Battery>Plug in USB while pressing Volume Down Key!)
As far as i guess we can enter emergency mod by pressing both the volume keys and power key at the same time.
I tried using KDZ but at some point gives me an error of WParam and LParam as I posted above.
Click to expand...
Click to collapse
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
need4steer said:
Yes, you're right - to enter emergency mode hold volume up + volume down + power
When you're inside you'll see on your screen "EMERGENCY MODE" on a yellow background.
Only the use KDZ-flasher or the lg mobile support tool.
If you're indeed in this mode, then try what @kien_vip suggested above.
Click to expand...
Click to collapse
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
AppY.fTw.wOw^ said:
I tried to enter the mode but failed!!
The buttons just light up for a second or two then vibrate then again dead.
I Cant Enter Emergency Mode But Download Mode!!!
NO Volume Up+Volume Down+ Power Button
But
YES Volume Down Pressed While Plugging In USB
Click to expand...
Click to collapse
Then all is left for you is to try what @kien_vip suggested previously.
need4steer said:
Then all is left for you is to try what @kien_vip suggested previously.
Click to expand...
Click to collapse
Before entering emergency mode you should remove the battery for a few seconds. Place it back into your phone then enter into emergency mode. Hope this could help you.
Lg update tool uses baseband as the only check whether your device has the latest update. This means you will get the update if you use an older baseband. However, you should try emergency option.
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
AppY.fTw.wOw^ said:
Thanks To All Of You Guys Problem Solved!
Took It To Local Repair Center And Using RIFF BOX JITAG They Solved It!
It Costed Me INR - Rs. 600 Or USD - Around 10 $!
Thanks Everyone! :good:
Click to expand...
Click to collapse
Good to know!
Thanks a lot for the detailed information.
hi
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
allainvillanueva said:
I have lg optimus e400, first I flash ICS cyanogenmod then I return to stock ROM....then I discovered a kitkat update and I flash it but due to my vision issues again I returned to stock ROM, until I noticed really odd problem my system memory became smaller, 62MB to be specific, which is usually 125mb free space after a factory reset, I do the reset again and again using factory reset on settings and in the cwm recovery and nothing happens my installed apps is still there ,,other than that many apps stopped unexpectedly and doesn't work anymore (e.g. message, camera, gapps,WAP/mobile data,com.android etc)...
solution I tried:
-factory reset
-ROM reflashing
-clearing data and fix permissions via cwm recovery(this one fix the gapps and com.android force stopped)
any suggestions ....
thanks any effort and help is much appreciated..
Click to expand...
Click to collapse
Hey, Sorry If im Replying Too Late.
Try Re-Flashing Stock RoM Using Kdz Updater.
This Should Help You! Then If You Want To Root Again Try SuperOneClick Root (Easiest Way) And Install CWM
I think i flashed wrong stock ROM.
problems with phone now are
1.no recovery
2.no download mode
3.stuck at lg logo.
4.whenever plug in USB it starts automaticaly and get stuck at LG logo.
5. can be power of by long pressing power button (it gets reboot in between).
but it can enter in "three button press" mode
please help me ...
Connect it to pc. What happens when it's connected ?
YOU NEEd read topic
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
hey
tungkick said:
YOU NEEd read topic
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Brother , i have read this article but i m not getting it ... i have opened my phone but i think its not working ..
Devil216 said:
Brother , i have read this article but i m not getting it ... i have opened my phone but i think its not working ..
Click to expand...
Click to collapse
if hard you add friend facebook tungkick777 i check now
If qualcomm 9006 phone of you i unbrick free
Are you sure download mode isn't working? Easiest way is this... With phone off, hold ONLY the up volume key. Then while holding, plug in the phone to the PC. What does it do?
hey..
tungkick said:
if hard you add friend facebook tungkick777 i check now
If qualcomm 9006 phone of you i unbrick free
Click to expand...
Click to collapse
.. i have sent u the req on facebook please accept ..
please help ..
please help with .. which sotck rom to use , and also , which partition images to use (for flashing the partitions)
Phone model : lg g2 d802 (32 gb) , Europe purchased .....
i have been able to use the methed of short circuiting the IC capacitors and flashed partitions but now phone stuck in firmware upgrade screen .... now the problem is that i dont know the model of stock rom to flash ..
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Schubi_1 said:
Hey ^^
I recently tried to install a custom rom on my LG L5-E610 so I rooted the device, unlocked the bootloader and installed CWM Recovery on it. So far so good.
Btw I was going to use this custom rom: http://forum.xda-developers.com/optimus-l3-l5-l7/development/l5-l7-cyanhacker-v2-0-sbp-t3061734
Beeing in CWM I flashed GApps, SuperSU and the rom of course AS WELL AS some sort of baseband (which I think is something that I was not supposed to do as it's not claimed in the custom rom thread)
And now everytime I try to power up the phone this happens: (video on my dropbox) https://www.dropbox.com/s/eifhw0pk1kwz2fd/LG L5 problem.mp4?dl=0
However sometimes after beeing stuck on that screen (and the screen turns off) i can (after pressing the home button) use the phone normally with the custom rom on it. Although sometimes the touchscreen or the speakers won't work.
But usually it's stuck like shown in the video.
I also can't enter CWM Recovery anymore.
Nothing helps so I hope some kind person on XDA can help me
Thanks in advance,
Schubi_1 ^^
Click to expand...
Click to collapse
Don't be desperate
You installed the baseband of aidasaidas75. I don't know why he made this new baseband, but several people have passed or are going through this situation you are going through right now. Download this file which contains a tutorial that I did (with videos) and follow in the order. Here is the link to download: http://www.mediafire.com/download/puibfc3chbrw2zs/tutorial.rar
Phone was not found!
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Schubi_1 said:
Thank you very much
i just have a problem
whenever i try to use kdz updater it says "PHONE WAS NOT FOUND" although i tryed to install all the drivers i could find
does anyone know how to fix this?
Click to expand...
Click to collapse
Edit: Have you putted the phone in emergency mode?
iTzMeB1tch3s said:
Edit: Have you putted the phone in emergency mode?
Click to expand...
Click to collapse
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Schubi_1 said:
yes
at least i guess i'm in emergency mode as the screen then turns from the way it looked in the video to gray
but still it doesn't work
Click to expand...
Click to collapse
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
iTzMeB1tch3s said:
The screen is gray? It should show the LG Logo and a message like "Don't remove the USB cable" or something...
Have u done this procedure? ---> 1st - Remove the battery and insert again | 2nd - Click the Volume Up (or Down, try both and see which one works) button and connect USB cable to PC | 3rd - Open KDZ and flash the stock ROM (or whatever .KDZ file you have for the e610) | 4th - If it shows an error in KDZ like Wparam or Lparam (0) just ignore it and wait till it reaches (100) | 5th - Let the phone reboot... You have to be patient here because it takes a really long time! | 6th - Enjoy your phone
Click to expand...
Click to collapse
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Schubi_1 said:
my phone doesn't show any logos
the moment it turns on the screen the screen just stays as shown in the video
whenever i connect the phone to the computer (whilst pressing both volume up+down) and then start the kdz updater the only thing that shows up is:
PHONE WAS NOT FOUND!
i tried most of the things you suggested but nothing works
i think the problem is that i'm missing some sort of driver as my phone doesn't get detected by the computer as a LG L5 but instead as "android" wich my computer thinks to be a Mass Storage Device.
Click to expand...
Click to collapse
you have to leave the screen like this:
View attachment 3716606
If you get put in this way, just connect to your PC and have them install the Stock ROM.
Now, if you could not leave it, try other key combinations to try to enter download mode.
do not give up!!!