Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
No problem if you brick a sammy phone. its easy to flash stock rom. How did you brick your g2?
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
Totally at a loss at this point.
Click to expand...
Click to collapse
Why did flashing a rom leads you to that error? Sorry but not familiar with your roms but is this rom really for your LG G2 model?
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
Hey I'm in the exact same position as you... did you manage to figure out a way to get into recovery?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
kureta said:
twrp corrupted my cache partition and the phone could not boot. i tried to flash cwm while in twrp and i guess i messed up recovery and/or boot partitions. al i could get was fastboot. i flashed a boot.img i got from somewhere in here. now it says security error and it does not boot. it does not enter into fasboot. i can enter into recovery mode but it is the stock lg recovery and if i choose "delete all data", which is the only option, it gives an error and restarts.
if i try to flash stock firmware as described in this post it stops at 49%.
Click to expand...
Click to collapse
I am on the same boat, same problem, and don't know what else to do...hope someone could help us out.
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Solution
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Any luck anyone? I can't get the suggestion in the last post to work because my phone just goes from the LG Logo to Security Error. I can't get to download mode. Or recovery. Or get ABD to see it.
Odd
quatrix1 said:
IF you still have guys this issue i have solusion for you .
This happened to me yesterday too
1. Download ADB drivers for LG G2 LINK
2. Download LG Mobile Support Tool you can find this here LINK
3. HOLD VOLUMEUP + POWER button to enter the download mode and connect your device to pc
4. Run LG Mobile Support Tool ( if your device vas found click settings select upgrade firmware this will download for you 1.9 GB STOCK FIRMWARE
5. Enjoy your mobile
Click to expand...
Click to collapse
i have to choose upgrade recovery and it gets past analyzing then doesnt show a bar for downloading software...
HELP!!!!!!!!!!!!!!!!!!!!!
Can someone help me I successful in installing twrp though autorec apk and the same for rooting my g2. I flashed cm with nightlies and noticed that twrp had a update. I downloaded the zip and try flashing it like flash a recovery in flashify but that din't work and readed that zip flashing though twrp didn't work but renumber this video and though it would update my recovery to 2.7.1 but it was successful in doing so but when I got to recovery it was 2.7.0. That not the problem form there I tried to boot into my system. Then it turn off though that I passed power off instead but when turn my g2 back on I found that I had a security error show up then turn back off. So can someone help show me a tutorial on unbick or a way to remove error. Also I have the d800 and i have some idea without going though unbicking a hard factory rest or flasing twrp form there site in fastboot. Finally that lg mobile support tool say that im up to date. I think doing the autorec twrp recovery locked as my phones recovery like trying to flash a rom with a locked bootloader.
Ok guys i trying to help cause it happen to me too,sorry for my english too slow but i try,when you try go twrp with volume up+power buttom it still show security errow,that ok your device not hardbrick yet,when you try volume down+power buttom it show hard reset it does mean it clear all rom,picture in internal but it go to twrp again,and them just flash another rom in your device and it done,have great day piece
I had the same problem on my G2 was using twrp to flash cyanogenmod not sure what i did and phone rebooted to show security error message. I entered recovery mode (power and volume down release when logo pops up and press power and volume down again hold for a second then tap both buttons a few times) pulled up the option to factory reset so i did and it booted me into twrp and allowed me to flash cyanogenmod correctly this time and the phone started back up with no problems. hope this can help someone else as well.
Anybody know the solution?
I also have the security error boot loop after flashing KK baseband files... I tried to enter recovery mode by holding vol down & power button but it wont work...
it does work when i enter download mode (vol up + power button), but i don't want to have to download the stock LG ROM..
anybody know how to by pass the security error boot loop to allow me to reflash?
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
if you still bricked. try this
get your tools from here: http://forum.xda-developers.com/showthread.php?t=2432476
keep reading or follow above thread. both will work.
best of luck.
After all the drivers installed correctly
make sure your phone is connected to the
com41 port change it if it already not ( Under device manager > Go to Ports (COM & LPT). You should see LGE AndroidNet etc... Right click it and go to Properties > Port Settings > Advanced > Change COM Port Number to COM41 > OK > OK > Close Device Manager )
run flash tool
1. choose type CDMA
2. chose PhoneMode: DIAG
leave rest as it is.
3. choose your kdz file.
then go to download mode
1. power off
2. press and hold vol + key and plug usb cable
3. done )
We have go 2 flashing modes.
1. Normal Flash is for flash with keeping data
2. CSE flash is totally new start preffered.
hope this helps.
thanks but it was a long time ago and I further messed up things, ended up sending it for warranty. they have replaced the device.
me too messed up my cell 1st i was on cloudy g2 v2.1 installed cm11 nightlies but the camera was not so good so then installed cloudy g2 v2.1 n since then i was having problem regarding sound during call and also some hard noise like siren starts randomly, i searched alot but didnt got any solution. wiped all many times (including internal storage ). but no luck then i thought i might be baseband error so i just downloaded auto recovery n flashed it n then stuck into security error but thank GOD i had custom rom in my sd card that time i flashed it back but still em having the sound error.
lastdeadmouse said:
Ok, so I flashed cleanrom ex, and on reboot I got a security error.
I tried to get to recovery, but it wipes data and immediately reboots.
I've tried flashing the stock rom, but lg flash tool tells me it's the wrong device (now thinks it's a D802).
I've been trying to get into TWRP on scrosler and samsunggalaxystig's advice, first by repeatedly trying an adb reboot recovery, then by writing a batch script to do it repeatedly in order to catch it before it reboots.
Problem is, I don't know if I had already had ADB drivers installed on this computer for the G2 (had rooted while at work), and despite installing them more than once, I don't think the device actually has enough time to be recognized as I still have an unrecognized "g2" in device manager while TWRP is wiping.
Any ideas? Is there any way I can force the install of the ADB driver without having it connected for more than 20 seconds? Spitballing... would it be possible to actually flash a D802 image so I could then root, change the build.prop to D800, and then flash the D800 image?
Totally at a loss at this point.
Click to expand...
Click to collapse
kureta said:
did you solve your problem? i have a similar problem and i just bricked an s3. this g2 is brand new and now it's bricked too! if you have found a solution please respond... :crying:
Click to expand...
Click to collapse
k2thejx5 said:
Yep me to same issue. Pretty much tried 6 different methods and still stuck
Click to expand...
Click to collapse
Hey guys, I was in the same boat for a little but was able to fix it by downloading the 801C firmware and flashing it. The firmware file should be a KDZ extension and you should also download LG Flash Tool 2014. Turn the phone on by holding the Power button and Volum up while it is plugged into your computer(It has to be plugged into a computer with LG phone drivers or it won't work).
Follow this tutorial and you will be set.
http://www.droidviews.com/how-to-restore-lg-g2-to-stock-firmware/
Start at step 17 on Method 1 and you should be golden.
Hope this helps guys!
Help!! I recently installed and OTA update on my LG G2 and after I rebooted it, it got stuck in recovery mode, it doesn't go to download mode. My device is rooted.when i open phone cwm menu coming. i tryed ota cable but with cwm not working .i m trying with windows adb shell. but windows has driver problems for d 802..can you help me
Delete
Nikolay15 said:
I tried to install twrp on my d802 and the first method didnt work ,so i tried the second and it looked like it had worked but when I rebooted in recovery it said :
boot certification verify
secure booting eror
couse: boot certifiction verify
and after that it goes to a black screen.
I also tried to boot into bootloader and it just booted up normaly. The phone works normaly it can boot. I am on kitkat stock rooted I also tried instaling other recoverys like cwm philz and other versions of twrp and it didnt work.
Shoud i try doing this http://forum.xda-developers.com/showthread.php?t=2582142 , or there's some easiar way
Click to expand...
Click to collapse
If you can get your PC to recognize your phone with the phone's drivers installed, then you have hope. If you can still get into android itself, install twrp installer from the Play Store. Update to the latest recovery from there (assuming your rooted).
If you cannot get into android, but when pressing volume up while plugging a usb cable connected to a PC in, your phone is recognized by the PC, you have to flash the stock KDZ file using the R&D test tool that floats around on these forums. It will unroot your device, but it will give you the chance to start clean and unharmed.
For me, I have to send mine in under warranty because now my G2 doesn't even pop up on Windows or Linux.
MDA400 said:
If you can get your PC to recognize your phone with the phone's drivers installed, then you have hope. If you can still get into android itself, install twrp installer from the Play Store. Update to the latest recovery from there (assuming your rooted).
If you cannot get into android, but when pressing volume up while plugging a usb cable connected to a PC in, your phone is recognized by the PC, you have to flash the stock KDZ file using the R&D test tool that floats around on these forums. It will unroot your device, but it will give you the chance to start clean and unharmed.
For me, I have to send mine in under warranty because now my G2 doesn't even pop up on Windows or Linux.
Click to expand...
Click to collapse
I can boot in android and i am rooted. I instaled twrp manager and it says that there's no compatble recovery with my device samo goes for goomaneger.
I tried to install stock recovery and it got me stuck on lg logo .
I instaled it with this comand dd if=/data/local/tmp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Hello guy's,
i have quiet a strange issues with my lg g2
I was on Cloudy flex (Kitkat) with my rooted G2 and wanted to try out the new Lollipop Cloudy ROM.
So i flashed it using TWRP.
It did not work and i Realized that i should have bin on Android 5.0 stock before flashing.
So i went back to 4.4.2 Stock ROM using the LG flash Tool and a kdz file.
Now the Phone is working fine, but there is no way to got to Download or Recovery mode anymore.
I did not expect TWRP to be installed anymore but i don't even have the stock Recovery and much more important no download mode.
Can somebody help me?
Try quickboot to boot to recovery.
what variant are you on ?
bender_007 said:
Try quickboot to boot to recovery.
what variant are you on ?
Click to expand...
Click to collapse
d802
i think i bricked it now!
i was able to root the device and i installed Flashify.
Than i flashed laf.img with flashify according to that FIX: http://forum.xda-developers.com/showthread.php?t=2706590
Now i cant do anything regardless of what i do the LG logo comes up and stays there for ever.
Even when i plug in the USB cable only the LG Logo pops up.
At least i can still see it in device manager but i can not find it in CMD using that instruction:
http://forum.xda-developers.com/showthread.php?t=2477595
Nobody an idea?
Because i ran out of them!
Well you are doing stuff on your own m8.
You will get a secure brick this way.
More info needed..what is your device recognized as ?
Hey guys, I know there are lots of brilliant minds in here, so I really need help, since g2 is my 2nd daily driver and my g4 died for some frickin' reason. Running D802 with cm11 flashed and cwm recovery.
Basically, I accidently accepted the auto software update and now, my phone rebooted and cannot boot (only boots into recovery). It cannot boot into download mode, so flashing the stock Android .kdz doesn't work without the dw mode. I tried to flash a ROM thru adb, but my pc didn't detect my g2 as an adb device, even tho I installed lg's usb drivers.
I really need the phone by tommorow and I have like 3 hours to do everything, any help would be appreciated a LOT.
tl;dr
LG G2 (hard?) bricked
no download mode
recovery still intact
phone doesn't boot
pc doesn't recognize it
basically stuck in recovery