Hi Everone,
I was using the latest ColorOS for the find 5 and decided to change to the omnirom.
My phone was rooted and so i've installed TWRP Custom Rec.
I downloaded the omnirom nightly for the find 5 aswell as Gapps and the Modem 4.1 file.
Once in TWRP Recovery i've chosen to install the omnirom.zip from my SD card.
It starts to install and then says:
-formatting system
-extracting system
-Symlinking
-Set_metadata_recursive: some changes failed.
-E: Error executing updater binary in zip ' (sdcard)
-Error flashing zip (sdcard, path...)
-Updating Partition Details...
--FAILED--
The problem now is that i cannot get beyond the TWRP recovery screen.
It's showing me the menu and its options but for the last 4 hours i've been googling and asking for help but so far no succes.
The Rom is not installing and i cannot exit from the TRP rec. menu.
Any thoughts?
*update*
When the battery died, i recharged it and it booted again to the TWRP recovery screen after displaying the message
"Touchscreen Firmware update in Progress. Please Wait...
Related
was on 4.3 JWR66Y with stock kernel, unlocked bootloader, rooted - super su, busybox & a Custom recovery i.e. TWRP.
with Few Mods i.e. 4 way reboot, battery circle & Custom softkeys.
my nexus 4 showed OTA 4.4 update notification, i followed process - it downloaded OTA & accepted "reboot to install", automatically restarted to twrp nothing happened further. so i did factory reset to try again but found out that the downloaded OTA file was gone! & it shown "no latest update" later i manually downloaded "KRT16S frm JWR66Y" zip (238.9 mb) frm google/android server & tried to flash using TWRP, well it aborted saying some error in the middle of flashing (flashing didnt complete). So i wiped cache, dalvik etc (excluding partition & internal storage) to try flashing the file again. Worst thing is the "reboot to system" says "there is no OS you still want to continue?" stuck at google logo. (did read somewhere to rename zip file to update.zip unfortunately it didnt work)
good thing is i still have access to fastboot/bootloader and of course TWRP
what are my options ? use NRT to go back to 4.3 stock everything & then try to update again?
Please help, thank you XDA..
(could not find any other similar thread i.e. rooted, twrp, unlocked bootloader, with few mods etc.)
rajeshkoshti said:
was on 4.3 JWR66Y with stock kernel, unlocked bootloader, rooted - super su, busybox & a Custom recovery i.e. TWRP.
with Few Mods i.e. 4 way reboot, battery circle & Custom softkeys.
my nexus 4 showed OTA 4.4 update notification, i followed process - it downloaded OTA & accepted "reboot to install", automatically restarted to twrp nothing happened further. so i did factory reset to try again but found out that the downloaded OTA file was gone! & it shown "no latest update" later i manually downloaded "KRT16S frm JWR66Y" zip (238.9 mb) frm google/android server & tried to flash using TWRP, well it aborted saying some error in the middle of flashing (flashing didnt complete). So i wiped cache, dalvik etc (excluding partition & internal storage) to try flashing the file again. Worst thing is the "reboot to system" says "there is no OS you still want to continue?" stuck at google logo. (did read somewhere to rename zip file to update.zip unfortunately it didnt work)
good thing is i still have access to fastboot/bootloader and of course TWRP
what are my options ? use NRT to go back to 4.3 stock everything & then try to update again?
Please help, thank you XDA..
(could not find any other similar thread i.e. rooted, twrp, unlocked bootloader, with few mods etc.)
Click to expand...
Click to collapse
If you have the zip you can sideload it. Or you can flash the factory images in fastboot mode. This is post here for the guides. http://forum.xda-developers.com/showpost.php?p=47762352&postcount=2
Good evening everyone.
I write because I have a problem with the installation of the CM on my meizu MX4.
I ran perfectly the procedure of unlocking the bootloader, and once unlocked, I flashed the recovery Philz. Later I tried to flash the CM with adb, but in at end it always says "Installation Aborted". I tried with the patched recovery and with cofface, but I just can not flash it.
I then tried to do a wipe cache but no with any recovery that I flashed always appears to me:
"E: Can not mount / cache / recovery / command
E: Can not mount / cache / recovery / log
E: Can not open / cache / recovery / log
E: Can not mount / cache / recovery / last_log
E: Can not open / cache / recovery / last_log "
I read here http://forum.xda-developers.com/meizu-mx/general/tutorial-bootloader-unlocking-mx4-m1-t3201715 that I could flash the patched rom deleting the file uboot.img and preloader.bin but I can not find anywhere the second file, and also I'm afraid to brick the phone ... someone has already done it?
Tell me that at least in the future I will be able to install the CM. Loved and hated Flyme.
Sorry for the English and thanks in advance for your reply.
Why you don't install CM from the recovery?
Sent from my D6603 using Tapatalk
I has this problem also when try to wipe cache. I fix cache mount with "wipe for new rom" option in wipe menu on philz recovery.
After that install cyanogen .zip with recovery.
Now i'm back to flyme but i flash patched flyme4.5.6i-twrp.zip found on 4pda forum, with twrp recovery for mx4.
Here is link for tutorial *4pda.ru/forum/index.php?showtopic=689760&st=780#entry43612111*
My MX4 is now on Flyme international version (original was A firmware) and i still have unlocked bootloader and custom recovery.
Everything works fine without any bug.
artlov I installed the recovery and then I did:
1) install zip
2) install zip from sideload
3) MX4 connect to pc
4) open CDM and write "adb devices" enter
5) "adb sideload cm12 ect * enter *
6) sull'mx4 appeared the word "installation aborted" after loading on pc
Now i have flyme 4.2.8.2A with philz recovery.
mmdag82 i don't find on philz the option "wipe for new rom"
"Clean to Install a New Rom" is exactly name of option under Wipe menu
And then i can try to flash CM? By terminal or with file zip on mx4's memory?
Thank you for your answers!
With zip file on mx4 memory
did you tried factory reset because you must do that befor adb sideload and i woildn't do Clean to Install a New Rom because it will delete everything about current system
Yeeah! CM installed! Thanks a lot guys!
MX4 not read sim card with CM...
federicolucchesi said:
artlov I installed the recovery and then I did:
1) install zip
2) install zip from sideload
3) MX4 connect to pc
4) open CDM and write "adb devices" enter
5) "adb sideload cm12 ect * enter *
6) sull'mx4 appeared the word "installation aborted" after loading on pc
Now i have flyme 4.2.8.2A with philz recovery.
mmdag82 i don't find on philz the option "wipe for new rom"
Click to expand...
Click to collapse
There is a solution. Try to reflash the patched recovery.
Now reflash 4.2.1.2 with clean.
Reboot, and reroot, reinstall flashify and terminal.
Do again the tuto step by step.
Try and tell me
Edit : Sorry, i didn't saw you have done ^^
I've done! Not reads SIM but i think is problem of card, cause i tried other SIM that weren't chopped from old SIM card and them run perfectly!
Hey,
hope somebody can help me.
I wanted to install flymeos on my arale until the cm-version is usable for me.
I am only able to install version 4.0.4 i or a but i cannot upgrade nor directly flash a version later than that...
I tried several recoveries (philz, cofface, twrp) and several versions (4.2.8.2i/a, 4.5.6i). Any ideas?
-----------------
EDIT: Recovery logs always tell me that there is no space on /custom left. Do i have to reformat my arale with a android scatter? I installed 4.0.4 and ran fastboot -w. Thought this would be sufficient. /custom is only 4.8M big...
I have an S5 '900I' which recently stopped booting after I installed a custom cyanogenmod theme.
I flashed CWM with odin but I couldnt boot into recovery after so I tried TWRP, which worked fine.
Im attempting to flash cyanogenmod 13 but it just sits at 'flashing file 1 of 1' indefinitely
So far ive tried,
1) Downloading a different version of cyanogenmod
2) verifying the hash
3) formatting, Dalvick, cache, system prior to the flash
4) unchecking zip file verification
5) making sure system IS mounted prior to the flash
6) moving the cyanogenmod.zip from the SD card to internal storage
7) moving the cyanogenmod.zip from root to subfolder (some people said this worked for them ?)
After attempting each and all of the above I have the exact same issue ?
It gets to 'Patching system file unconditionally' then sits there at ''flashing file 1 of 1' 'forever' i.e 1 hour plus
Is there anything I might be missing ?
selinkor said:
I have an S5 '900I' which recently stopped booting after I installed a custom cyanogenmod theme.
I flashed CWM with odin but I couldnt boot into recovery after so I tried TWRP, which worked fine.
Im attempting to flash cyanogenmod 13 but it just sits at 'flashing file 1 of 1' indefinitely
So far ive tried,
1) Downloading a different version of cyanogenmod
2) verifying the hash
3) formatting, Dalvick, cache, system prior to the flash
4) unchecking zip file verification
5) making sure system IS mounted prior to the flash
6) moving the cyanogenmod.zip from the SD card to internal storage
7) moving the cyanogenmod.zip from root to subfolder (some people said this worked for them ?)
After attempting each and all of the above I have the exact same issue ?
It gets to 'Patching system file unconditionally' then sits there at ''flashing file 1 of 1' 'forever' i.e 1 hour plus
Is there anything I might be missing ?
Click to expand...
Click to collapse
Do a fresh start , flash back stock rom then root install twrp and flash CM13.
I'm a relative beginner to flashing and rooting I used the ZTE axon 7 toolkit and now my phone is stuck in the boot animation. I can get into TWRP but when I flash the LineageOS zip in TWRP I get the following in red: Updater Process ended with Error: 7 Error Installing zip file '/external_sd/lineage-14.1-20170605-nightly-axon7-signed.zip' Updating Partition details....
....done Not sure what I'm doing wrong any help appreciated.
Did you fully wipe system before installing lineage? Did you make a back up of stock before installing in TWRP? Did you make sure your specific model is supported for that particular ROM?
Bad download?
Install Nougat bootloader.
I installed Nougat and tried to flash it using TWRP it installed successfully but when I turn the phone on I see this error image imgur.DOTcom/a/1EljH I can't insert links because I'm under 10 posts it seems)
How could I flash a stock rom if the recovery is now stock?
*** Sorry, my English isn't good ***
Hi, I have a problem with OP5, I decided to install OOS 8.0 (Beta), I had OOS on 7.1.1 (Root) (TWRP), I made full wipe in TWRP and installed OOS 4.5.14 (7.1.1), after that i get Stock Recovery and Iupgraded OOS to 8.0 (According to the OnePlus manual) -> Bootloop. I decided to go back to 7.1.1 -> Error, I uploaded TWRP and another attempt to download 7.1.1 -> The system got up but I can not do anything because I have an error "Udecrypting the device. (Write to do "Factory reset"), so again to TWRP -> Full Wipe and here is interesting, I get my error "Wrong argument", the phone does not see my built in memory (I write that I have 0mb), what can I do in this situation? Anyone know?
ERROR in TWRP: "Unable to mount storage"
Please help me.
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
themasv said:
Go to recovery -wipe-advanced wipe-data-repair or change file system- change file system. First select EXT2 and after that EXT4 and now you should be able to use your storage but you need to flash new TWRP (try this one https://forum.xda-developers.com/devdb/project/dl/?id=27442)
Click to expand...
Click to collapse
Thank you for that link. I was having another issue - the TWRP downloaded from the official site didn't work on the latest Oreo beta build and didn't overwrite the stock recovery and couldn't mount /data. This one did.
yeah im having major issues with mine, im now stuck in a download mode i cant get out of !
The first question is, you want to go Oreo or return nougat? In the first case, go to the dedicated thread, download the black TWRP and format data (if you can't read anything) reboot to TWRP again now copy the Oreo firmware and install it from the same recovery, reboot to recovery again if you don't have the stock one automatically installed, just flash it via TWRP. So once you're in stock recovery format EVERYTHING, reboot to system, and after you've configured the initial setup of your device if you want reboot to bootloader and reinstall the black TWRP and flash magisk 14.56 for root.. I've done this for getting this Oreo rom works
Exactly happened with me too. I even accidentally deleted all the contents of my storage. Tried to sideload via adb but got unknown device error. This thread worked for me
https://thedroidguru.com/how-to-unbrick-oneplus-5-phone-with-official-tool/
ive just restored the latest nougat firmware/radios and jumped back onto an aosp build until op5 gets official Oreo build