[Q] [GALAXY S4 i9305 4.4.2] WiFi won't turn on - - Galaxy S 4 Q&A, Help & Troubleshooting

Hello everyone and thanks for your time speding for helping me.
I have a problem with my Galaxy S4 i9305 with android 4.4.2 KitKat, the wifi won't turn on.
I tryed to install Omega room, but is stuck on bootloader animation.
I tryed to install Cynogenmod but wifi won't turn on.
I tryed to install the original firmware 4.4.2 with Odin with all components (AP,BL,CP,CSC) but nothing.
Now im on the original firmware, the last I've instaled, but i don't know what to do to make the wifi working.
I can't take it to Samsung Support, i've lost the bill
I don't know what to do, please guys give me a hand! A beer for who will resolve that problem
Here is a screenshot with all info of the rom i have now:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alinbody said:
Hello everyone and thanks for your time speding for helping me.
I have a problem with my Galaxy S4 i9305 with android 4.4.2 KitKat, the wifi won't turn on.
I tryed to install Omega room, but is stuck on bootloader animation.
I tryed to install Cynogenmod but wifi won't turn on.
I tryed to install the original firmware 4.4.2 with Odin with all components (AP,BL,CP,CSC) but nothing.
Now im on the original firmware, the last I've instaled, but i don't know what to do to make the wifi working.
I can't take it to Samsung Support, i've lost the bill
I don't know what to do, please guys give me a hand! A beer for who will resolve that problem
Here is a screenshot with all info of the rom i have now:
View attachment 2565321
Click to expand...
Click to collapse
Download and extract this File and Flash the .tar Via odin by selecting Phone/cp .. Make sure to turn off your Phone Manually and wait atleast 5 to 10 sec and Press+Hold Power+Volumdown in order to reach Download mode and flash. If still doesnt work reflash this files Modem and Bootloader via odin By selecting Modem- CP Bootloader- BL

No
Thanks a lot for reply!
Nothing to do, tryed to flash the fix and also to flash modem and bootloader, still doesn't turn on.
I'm going to be mad
Other solutions?

alinbody said:
Thanks a lot for reply!
Nothing to do, tryed to flash the fix and also to flash modem and bootloader, still doesn't turn on.
I'm going to be mad
Other solutions?
Click to expand...
Click to collapse
Are you using twrp recovery to flash Omega ?

Yes, i used twrp recovery for flashing Omega.
Now i tryied to flash WanamLite Rom, but nothing, still doesn't turn on WIFI. (

alinbody said:
Yes, i used twrp recovery for flashing Omega.
Now i tryied to flash WanamLite Rom, but nothing, still doesn't turn on WIFI. (
Click to expand...
Click to collapse
Go to wanam thread and Try to download and Flash the new Bootloader and Modem once again tby odin then do a fullwipe and flash hes rom .

Repulsa said:
Go to wanam thread and Try to download and Flash the new Bootloader and Modem once again tby odin then do a fullwipe and flash hes rom .
Click to expand...
Click to collapse
Alredy done, nothing to do.
Now I trayed with S4 Google Edition ROM, but nothing, this stupid wifi don't wanna turn on.
What i can do?
Is there some methonds to try if the hardware module is broked?
And, thanks a lot guys for helpping me!!

alinbody said:
Alredy done, nothing to do.
Now I trayed with S4 Google Edition ROM, but nothing, this stupid wifi don't wanna turn on.
What i can do?
Is there some methonds to try if the hardware module is broked?
And, thanks a lot guys for helpping me!!
Click to expand...
Click to collapse
Since your in google edition rom . Try a different kernel mate.
Sent from Hell ?

Repulsa said:
Since your in google edition rom . Try a different kernel mate.
Sent from Hell ?
Click to expand...
Click to collapse
I tryed 3 different kernel's but nothing.
I changed some roms, but nothing.
I trayed to flash bootloaders and modems, nothing to do.
Guys, im really going to be mad!

alinbody said:
I tryed 3 different kernel's but nothing.
I changed some roms, but nothing.
I trayed to flash bootloaders and modems, nothing to do.
Guys, im really going to be mad!
Click to expand...
Click to collapse
Do you mind downloading this file I9505_XXUFNA5_WiFi_FIX.rar and flash it via odin by selecting Phone/CP . Make sure to turn off your phone manually and then wait atleast 5 to 10 sec and Hold and press Power+Volumedown inorder to reach Download mode and Flash.
Edit: If still doesnt work Boot into recovery Do a fullwipe and reflash Either Omega or wanam mate. and if the problem still persist ,Your Last hope would be Forcing your phone to downgrade to 4.3 with Mobile odin pro then you flash a Kt kernel in order for the wifi to work

Repulsa said:
Do you mind downloading this file I9505_XXUFNA5_WiFi_FIX.rar and flash it via odin by selecting Phone/CP . Make sure to turn off your phone manually and then wait atleast 5 to 10 sec and Hold and press Power+Volumedown inorder to reach Download mode and Flash.
Edit: If still doesnt work Boot into recovery Do a fullwipe and reflash Either Omega or wanam mate. and if the problem still persist ,Your Last hope would be Forcing your phone to downgrade to 4.3 with Mobile odin pro then you flash a Kt kernel in order for the wifi to work
Click to expand...
Click to collapse
Hello i downgraded to 4.3 my phone with success, but wifi still don't work.
What i have to do now?

alinbody said:
Hello i downgraded to 4.3 my phone with success, but wifi still don't work.
What i have to do now?
Click to expand...
Click to collapse
Good Now download Kt kernel mate and flash it via recovery , follow the instruction ,Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions

Repulsa said:
Good Now download Kt kernel mate and flash it via recovery , follow the instruction ,Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions
Click to expand...
Click to collapse
Done but nothing.. (
I'm going to be mad lol!

alinbody said:
Done but nothing.. (
I'm going to be mad lol!
Click to expand...
Click to collapse
Do you mind dialing *#1234# and write it down here.

repulsa said:
do you mind dialing *#1234# and write it down here.
Click to expand...
Click to collapse
ap: I9505xxueml6
cp: I9505xxueml6
csc: I9505itveml1

alinbody said:
ap: I9505xxueml6
cp: I9505xxueml6
csc: I9505itveml1
Click to expand...
Click to collapse
Download and extract this file ML6 and flash the .TAR file via odin by selecting phone/CP , Turn off your phone manually. If the problem still persist , try to flash a different Kernel.

Repulsa said:
Download and extract this file ML6 and flash the .TAR file via odin by selecting phone/CP , Turn off your phone manually. If the problem still persist , try to flash a different Kernel.
Click to expand...
Click to collapse
I tryed with the tar but nothing.
Can u give me a good kernel to flash?
P.S Thank u a lot for your time you are spend for helpping me, if i'll resolve this problem i promise i'll donate to you!

alinbody said:
I tryed with the tar but nothing.
Can u give me a good kernel to flash?
P.S Thank u a lot for your time you are spend for helpping me, if i'll resolve this problem i promise i'll donate to you!
Click to expand...
Click to collapse
Try this one or this (Make sure to download the right one for you.) and Please do you mind Removing your battery for atleast 5 to 10 sec , and Im sure alot of xda member are willing to help you fix this situation.
Edit:
I am not accepting donations. and Just incase Do not donate to anyone claiming to be me. Or feel free to give it to XDA and give your self a Star .Rawr .Have a nice day.

Repulsa said:
Try this one or this (Make sure to download the right one for you.) and Please do you mind Removing your battery for atleast 5 to 10 sec , and Im sure alot of xda member are willing to help you fix this situation.
Edit:
I am not accepting donations. and Just incase Do not donate to anyone claiming to be me. Or feel free to give it to XDA and give your self a Star .Rawr .Have a nice day.
Click to expand...
Click to collapse
Nothing to do, i tryed to flash the two kernels but nothing, i don't know what i have to do!
But on advanced setting wifi shos it mac-id, so in my opinion, my noob opinion, wifi have to work, but it won't turn on..

alinbody said:
Nothing to do, i tryed to flash the two kernels but nothing, i don't know what i have to do!
But on advanced setting wifi shos it mac-id, so in my opinion, my noob opinion, wifi have to work, but it won't turn on..
Click to expand...
Click to collapse
Im almost out of Idea mate ,Can you try to Boot into recovery and do wipe cache/Wipe dalvik and If you still having problem , Im sure Samersh72 on this Thread will Prolly help you. Im sorry .

Related

SC-02B Root, Latest Firmware, CWM & Compatible ROMs

UPDATE:
NEW THREAD HERE:
SC-02B][CM-10.1_PATCH]Howto install I9000 CM-10.1 ROM to GS1 NTT Japan
http://forum.xda-developers.com/showthread.php?t=2094861
I will host all the files until the become irrelevant.
@didhiy, please PM me when you get stuff sorted so I can delete everything off my Google Drive.
[Original Post]
First of all... it took me months of searching, trial and error, stopping, restarting, and getting to a solid solution to root my phone, get the latest firmware, and also have CWM.
So credit to everyone who helped in the below threads:
http://forum.xda-developers.com/showthread.php?p=23307082#post23307082
http://galaxy.anddo.net/phpBB3/viewforum.php?f=2&sid=4505138adb8184c62f53453e901fbd5c
What you need:
https://docs.google.com/folder/d/0B_UvqlM1EJ_yeFVIN1JUQXNRZEU/edit
1. Odin 1.87
How to use Odin: http://forum.xda-developers.com/show....php?t=1160580
2. Flash SC02BOMKE3
(auto reboot, f. reset time CHECKED)
PDA: SC02BOMKE3_Daddy.tar.md5
3. After reboot, Wipe data/factory reset, clear your cache, then reboot.
4. Download the Superuser app from Google Play (https://play.google.com/store/search?q=superuser&c=apps)
5. Run Superuser on the phone to test if rooted or not (the above kernel is already rooted, so it should work). Update the su in the options page and it should update and be ok.
6. Go to Settings/About phone/Software update/Check for update and it update the firmware without flashing the whole system so you get to keep your 2.3.x update and root. I had to update twice... first time i did manually and the second popped up after the reboot...
7. Download and extract "KL4_ext4.zip"
8. Flash "zImage.tar" with Odin 1.87 to get CWM on your phone
(auto reboot, f. reset time CHECKED)
PDA: zImage.tar
9. Flash "kyapaT10mod3.tar"
(auto reboot, f. reset time CHECKED)
PDA: kyapaT10mod3.tar
For additional modifications to the kernel... I do not know what the changes are as the source is in Japanese and I don't feel like having my wife read the kanji for me... but apply if you want.
COMPLETE
IF ALL ELSE FAILS: (missing dbdata... sim card not detected...)
A. Flash SC02BOMJJ1
(re-partition, auto reboot, f. reset time CHECKED)
Pit: sc02b_odin_2011112.pit
*PDA: SC02BOMKE3_Daddy.tar.md5
Phone: MODEM_SC02BOMJJ1.tar.md5
CSC: CODE_SC02BOMJJ1.tar.md5
* Yes i know that the firmware code it does not match... but it worked for me and I use this phone for work…
B. Wipe data/factory reset and clear your cache, then continue from step 2
[SC-02B][CM-10.1_PATCH]Howto install I9000 CM-10.1 ROM to GS1 NTT Japan
http://forum.xda-developers.com/showthread.php?t=2094861
IparryU said:
So I flashed doing what was in this thread:
http://forum.xda-developers.com/showthread.php?t=1379650
Using thsese files (thanks robo-d):
JVU + CFROOTJVU (better than JVP):https://hotfile.com/dl/151999730/10c...FROOT.rar.html
but my sim card was not detected. tryied to flash my modem file, that failed. but then I just reflashed everything to get CWM and restored my to working condition with my Nandroid backup.
will do some more testing now... I should read more about how the modem, csc, code, etc stuff works so I dont do any pointless flashing.
But to make it clear, I did get CM9 on my phone, no problem.
Status 7 error was also solved when I flashed the JVU kernal. So the status 7 error should be there for anyone who flashes SC02BOMKE3.
My next step:
get stock firmware
CF-root it, boot into CWRecovery
check if Status 7 error exists when flashing CM9
IF NO Status 7, flash CM9 and check Simcard
IF Status 7, back to square 1.
Click to expand...
Click to collapse
keep it up. IPARRYU. FULLY SUPPORT YOUR WORK.
Sent from my SC-02B using xda premium
iparryu, can you try after root and try to use asansm dongle to unlock phone? i read some article on the net said that asansa dongle can unlock the sc02b by one click. but i see the supported list, the sc02b was not listed there.
Sent from my SC-02B using xda premium
finally a thread for this Android Phone (SC02B), now ive already tried all your instructions and its working for me..i wants to try another ROM or any compatible for this phone..can you recommend something for me?.how about Dark Knight ROM?.or CM9?.is CM9 can now be flash in this phone?.
Thanks
wesker5131 said:
iparryu, can you try after root and try to use asansm dongle to unlock phone? i read some article on the net said that asansa dongle can unlock the sc02b by one click. but i see the supported list, the sc02b was not listed there.
Sent from my SC-02B using xda premium
Click to expand...
Click to collapse
Jist go to a docomo shop... the mmi code is invalid on my phone so the thread regardoing the mmi methos dont work for me.
Post a link of what you are talking about.
greedisgood99999 said:
finally a thread for this Android Phone (SC02B), now ive already tried all your instructions and its working for me..i wants to try another ROM or any compatible for this phone..can you recommend something for me?.how about Dark Knight ROM?.or CM9?.is CM9 can now be flash in this phone?.
Thanks
Click to expand...
Click to collapse
CM9 will flash... but the sim card wont detect. But i only tried on the usa firmware... i cant find a SC02B firmware that i can flash CWM and NOT get a status 7 error when i truy to flash CM9.
I will try DK rom next as i lucked out with CM9 for the past few days.
If the process is not the same as CM9 then it may work...
Then again, after a few hours of trian and error, i noticed that when i flash the rom baseband or kernal is changed... so this would screw up any previous firmware that i am on...
Pleas note that i not a dev... i dont make any of these files... i just flash them...
I must look like a total jackass to one of these super nerds here... but hey, let the Guinea pig do his job.
Sent from my SC-02B using Tapatalk 2
you mean after root the sim still can detect? is it after flash cm9 the sim only become not detected?
Sent from my SC-02B using xda premium
wesker5131 said:
you mean after root the sim still can detect? is it after flash cm9 the sim only become not detected?
Sent from my SC-02B using xda premium
Click to expand...
Click to collapse
no, i flashed US stuffs, and was able to flash CM9 from CW recovery.
So after reading some stuffs... the Status 7 error is proably from me trying to flash CM9 with firmware (or whatever it is called) that does not match...
same think happened with Dark Knight 5.
So I am at a conclusion that all we can do is hope someone develops a ROM for SC02B or there is something else we can do to get around this...
so for now, we are stuck with kyapas T10 mod3 (not that it is really bad... but no other ROMS)
IparryU said:
no, i flashed US stuffs, and was able to flash CM9 from CW recovery.
So after reading some stuffs... the Status 7 error is proably from me trying to flash CM9 with firmware (or whatever it is called) that does not match...
same think happened with Dark Knight 5.
So I am at a conclusion that all we can do is hope someone develops a ROM for SC02B or there is something else we can do to get around this...
so for now, we are stuck with kyapas T10 mod3 (not that it is really bad... but no other ROMS)
Click to expand...
Click to collapse
Ive also tried the recovery-clockwork 2.5.1.2 which is for the GALAXY S GTI9000 i think but when i try to reboot it works for the first time the Ntt Docomo has been replaced by the GTI9000 logo..so i went to the recovery mode to try to flashed the CM9 Nightly ROM but it doesnt work so ive try to reboot it..oh im stucked with the Ntt DOcomo and the GTI9000 logo..lol..so ive tried to reflashed again..i think are phone is not COMPATIBLE to any ROMS..anyways i want to ask about the kyapat10 mod kernel its good for me cause it has OC mod already..but when i try to lock my phone some fading/blurring colors appear so any solution for this?.thanks a lot for the help..keep it up..
greedisgood99999 said:
Ive also tried the recovery-clockwork 2.5.1.2 which is for the GALAXY S GTI9000 i think but when i try to reboot it works for the first time the Ntt Docomo has been replaced by the GTI9000 logo..so i went to the recovery mode to try to flashed the CM9 Nightly ROM but it doesnt work so ive try to reboot it..oh im stucked with the Ntt DOcomo and the GTI9000 logo..lol..so ive tried to reflashed again..i think are phone is not COMPATIBLE to any ROMS..anyways i want to ask about the kyapat10 mod kernel its good for me cause it has OC mod already..but when i try to lock my phone some fading/blurring colors appear so any solution for this?.thanks a lot for the help..keep it up..
Click to expand...
Click to collapse
I would get the NTT docomo boot screen followed by the GTI9000 screen, so we are on teh same page. the CM9 Nightly build works perfectly fine despite the sim card not being detected.
If I knew how to make a CF-root kernal for the SC-02b I would do it... but dont know who to get at to get the stuff needed...
ya i got that weird screen too.. also if you turn your brightness down using zdtools it will give the same effect until you increase the brightness.
that is not a major malfunction, so don't worry about it.
IparryU said:
I would get the NTT docomo boot screen followed by the GTI9000 screen, so we are on teh same page. the CM9 Nightly build works perfectly fine despite the sim card not being detected.
If I knew how to make a CF-root kernal for the SC-02b I would do it... but dont know who to get at to get the stuff needed...
ya i got that weird screen too.. also if you turn your brightness down using zdtools it will give the same effect until you increase the brightness.
that is not a major malfunction, so don't worry about it.
Click to expand...
Click to collapse
Yah i think its not a major problem, but is there any solution you can find about that screen problem?
how come you flashed the CM9, ive tried to flashed it with the SGS GTI9000 method, but ive got some error so i didnt succeeded
About the sim detection?.did u try to unlock it again?.like the number combination method?.or maybe the modem is the problem?.what do you think?.
can you teach me how to flash the CM9?.step by step pls?.tnx a lot..
thanks for the info you gave us..i thought that im the only person who wants to try other ROMs..thanks..godbless..morepower..have a good day
greedisgood99999 said:
Yah i think its not a major problem, but is there any solution you can find about that screen problem?
how come you flashed the CM9, ive tried to flashed it with the SGS GTI9000 method, but ive got some error so i didnt succeeded
About the sim detection?.did u try to unlock it again?.like the number combination method?.or maybe the modem is the problem?.what do you think?.
can you teach me how to flash the CM9?.step by step pls?.tnx a lot..
thanks for the info you gave us..i thought that im the only person who wants to try other ROMs..thanks..godbless..morepower..have a good day
Click to expand...
Click to collapse
used these instructions (also snip quoted below) http://forum.xda-developers.com/showthread.php?t=1379650
BUT with these files:
robo-d said:
I translated into Spanish and updated this tutorial. I also uploaded the files that were dropped.
JVU + CFROOTJVU (better than JVP):https://hotfile.com/dl/151999730/10c2529/I9000XXJVU__CFROOT.rar.html
From this: http://miandroideazul.blogspot.com.es/2012/04/tutorial-como-instalar-cwm-recovery-y.html
Click to expand...
Click to collapse
+ ROM (I used update-cm-9-20120416-NIGHTLY-galaxysmtd-signed.zip)
AllGamer said:
Requirements:
Flashing Root and CWR via Odin:
Boot into Download mode (3 buttons salute)
run Odin
choose only these 3 parts
PIT = 512
PDA = CODE_I9000XXJVP_CL264642_REV03_user_low_ship.tar.md5
CSC = GT-I9000-CSC-MULTI-OXAJVP.tar.md5
flash it (Start)
note: you do not need to change your KG3 modem for Canada
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wait for it to finish rebooting, and skip all those steps in the 1st time phone wizard
reboot back into download mode again
close your previous session of Odin
run a new session of Odin
select PDA
select CF-Root-XX_OXA_JVP-v3.7-CWM3RFS.tar
flash it (Start)
it will reboot again
Congratulation! if all went well you should see these in your App drawer screen
to make sure it actually works, go into CWManager, and select ClockworkMod
select reboot into recovery
if all goeswell you should be inside the orange ClockworkMod Recovery v3.0.0.5
Flashing ICS AOSP ROM
if you followed all the above to this point, might as well have fun and load ICS, but first...
in CWR make a Nandroid backup of your stock JVP with KG3 modem
in CWR select backup and restore
select backup in the sub menu, i'll take about a minute or two to complete
it will automatically go back to the main menu in CWR when it's done with the backup
select mounts and storage
select mount USB storage in the sub menu
now copy & paste the ICS ROM to your phone, and optionally the Google Apps, face unlock, etc
select unmount
select +++++Go Back+++++
select wipe data/factory reset
select wipe cache partition
select install zip from sdcard
select choose zip from sdcard
in my case i installed these:
- ICS_4.0.1_r1-Beta2-i9000.zip (AOSP) or teamhacksung_galaxysmtd-ota-eng.BUILD7.zip ("CM9")
- gappsv5.1.zip
optionally you can also install
- face-unlockv5-final.zip
- FuguModICS_GT-I9000_update-Beta2.zip
- bd-ics-bootanimation-flashable.zip
after the flash it will reboot on its own, let it do its ICS magic
Enjoy!
Click to expand...
Click to collapse
IparryU said:
used these instructions (also snip quoted below) http://forum.xda-developers.com/showthread.php?t=1379650
BUT with these files:
+ ROM (I used update-cm-9-20120416-NIGHTLY-galaxysmtd-signed.zip)
Click to expand...
Click to collapse
when i flashed my CM9 i didn't used odin..i flashed it using the CWM..that's why i think it didn't worked for me..so this is the CM9 that cannot detect sim card??.i think the problem would be the modem..did u try the old modem of our phone??.the MODEM_SC02BOMJJ1.tar.md5..or it would have a conflict??.thanks i will give it a try..c:
greedisgood99999 said:
when i flashed my CM9 i didn't used odin..i flashed it using the CWM..that's why i think it didn't worked for me..so this is the CM9 that cannot detect sim card??.i think the problem would be the modem..did u try the old modem of our phone??.the MODEM_SC02BOMJJ1.tar.md5..or it would have a conflict??.thanks i will give it a try..c:
Click to expand...
Click to collapse
i used CWM too...
i did try the CF-root JVU files and the JJ1 modem but it failed.
I tried flashing my phone 5 times today... gonna stop at that and think about what I did.
need to start writing what I do down so I can back track so someone that knows what to do can look and give me some pointers...
IparryU said:
i used CWM too...
i did try the CF-root JVU files and the JJ1 modem but it failed.
I tried flashing my phone 5 times today... gonna stop at that and think about what I did.
need to start writing what I do down so I can back track so someone that knows what to do can look and give me some pointers...
Click to expand...
Click to collapse
oh gosh..im not an android expert or linux whatever..i dont know what to do next..laughs..i think we should consult mr kyapa..i cant figure it out..nose bleed my friend..sorry..:C
greedisgood99999 said:
oh gosh..im not an android expert or linux whatever..i dont know what to do next..laughs..i think we should consult mr kyapa..i cant figure it out..nose bleed my friend..sorry..:C
Click to expand...
Click to collapse
mind you kyapa does it all from adb shell... so that might bring a bit more complication...
but if that is the way to go.. .it looks like another few weeks of my life will be hitting up these forums for more answers.
IparryU said:
mind you kyapa does it all from adb shell... so that might bring a bit more complication...
but if that is the way to go.. .it looks like another few weeks of my life will be hitting up these forums for more answers.
Click to expand...
Click to collapse
gudluck my friend i hope u can figure it..i will also try another ROMs but i think Cyanogenmod are not compatible for this phone according to CyanogenWiki..did you read about the recovery 3e?.i think that sounds useful..but i didnt tried it yet..gudluck to us..c:
Well the rom is based off some firmware as all ot does is over right some files.
It did mention in the guide above that they keep a specific modem... that and in rom manager there ate several roms to download and flash.
But from my understanding, the japanes model has a one off modem just for the phone and using othe country modles wont work.
as mentioned in the guide above, Canada does not need a different modem file as it will still work.
That all makes sense... so the next step is to find a way to:
A) flash the modem file before flashing CM9
B) flash the modem file after CM9
C) integrate the modem file in CM9 so when
I tried A and B but it failed (i flashed with odin)
C would require knowledge of what a ROM actualy does when you flash it... but going back to the gude, CM9 does not overwrite the modem file when flashing it...
More or less, this would have to be a compatibility issue with the PDA, CSC, PHONE, and .pit file
Sent from my SC-02B using Tapatalk 2
hey guys i was browsing about our phone today
i just notice a value pack for our phone it's the OCL4
anyone who tried this one?
thanks
greedisgood99999 said:
hey guys i was browsing about our phone today
i just notice a value pack for our phone it's the OCL4
anyone who tried this one?
thanks
Click to expand...
Click to collapse
Source?
Sent from my SC-02B using Tapatalk 2

stuck at Factoryfs.img for DXLP9, no booting,no recovery,

i just make repack of dxlp9 with simg2img and ext4_utils..
Just unpacking factoryfs insert su and superuser with proper permission and then repack with mkuserimg.sh..
Tar with ustar..and then md5
When flashing im on stock gingerbread dxla1
All progress working well and odin say pass with the green sign..
After reboot an icon android robot make a progress bar like flashing..but it stuck for a long time.
I turn out the device and go to download mode again.. Try to flashing the stock odin dxlp9 but the result is same..
I try with the third. ..... And odin stuck at factoryfs.img.. Until 15 menit..
Last try.. Im use odin with stock gingerbread but still stuck at factoryfs.img...
Just wanna share all of this..
I will go to samsung center and will make a claim about it...
SO becarefull with ALL ICS release..
Im the unlucky one.. Isnt it?
another brick story
the bugs seem to be exist in every ics release at the same batch after all. thanks for bringing this up bud. good luck for the warranty claim!
Sad news... But this ics bug is so annoying... Hope you get the warranty.
bejoanakmami said:
the bugs seem to be exist in every ics release at the same batch after all. thanks for bringing this up bud. good luck for the warranty claim!
Click to expand...
Click to collapse
vivek2701 said:
Sad news... But this ics bug is so annoying... Hope you get the warranty.
Click to expand...
Click to collapse
Just another bugs.. I dont know.. This is really superbrick like PSA said or another bug..
by looking at the symptoms it definitely is a superbrick.
suwandiapr said:
i just make repack of dxlp9 with simg2img and ext4_utils..
Just unpacking factoryfs insert su and superuser with proper permission and then repack with mkuserimg.sh..
Tar with ustar..and then md5
When flashing im on stock gingerbread dxla1
All progress working well and odin say pass with the green sign..
After reboot an icon android robot make a progress bar like flashing..but it stuck for a long time.
I turn out the device and go to download mode again.. Try to flashing the stock odin dxlp9 but the result is same..
I try with the third. ..... And odin stuck at factoryfs.img.. Until 15 menit..
Last try.. Im use odin with stock gingerbread but still stuck at factoryfs.img...
Just wanna share all of this..
I will go to samsung center and will make a claim about it...
SO becarefull with ALL ICS release..
Im the unlucky one.. Isnt it?
Click to expand...
Click to collapse
how about if you try to flash new ics bootloader
http://forum.xda-developers.com/showthread.php?t=1658967
Got you om suwandi...sorry to hear that anyway...
Sent from my GT-N7000 using Tapatalk 2
kalkanisvec said:
how about if you try to flash new ics bootloader
http://forum.xda-developers.com/showthread.php?t=1658967
Click to expand...
Click to collapse
No i couldnt.. There is no progress bar while flashing in download mode..
I can enter download mode but flashing stuck...no recovery..
Please try this one
1. In download mode through PC odin just Flash the single PIT file with ICS LPF stock rom (Yes you heard right) with repartition checked no other file just a single pit...
2. On success remove your battery go to download mode again and flash the whole LPF...once again with all the files (PIT, bootloader, pda csc and modem) again check repartion...It should boot with LPF.
Please confirm if it works.....
last Friday i tried to install the lpf version via PC Odin... i was on rooted lpy
it was going ok but before the end it hang at factoryfs.img & gave a message"fail!" with red color..
maybe i waited 30 seconds then i tried to restart the phone & i got screen of death "if i'm not mistaken... see the pic"
but i was lucky because i was able to enter the download mode
after that i tried to install official LPY again... failed
tried to install official LA4... failed
after that i made a fast panic searching to solve the problem...
anyways the solution was by flashing a n7000 GB bootloader & official LA4 after taking the battery out for some time...
so if u are in the same situation try it out... maybe it will help
better to wait a confirmation from an expert...
good luck...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
something like this...
This doesn't sound like the bug everyone is talking about because you odin from gb or something I am not understanding
Sent from my GT-N7000 using Tapatalk 2
kalkanisvec said:
how about if you try to flash new ics bootloader
http://forum.xda-developers.com/showthread.php?t=1658967
Click to expand...
Click to collapse
And the bootloader is going to help how?
kalkanisvec said:
how about if you try to flash new ics bootloader
http://forum.xda-developers.com/showthread.php?t=1658967
Click to expand...
Click to collapse
rajendrakumardbg said:
Please try this one
1. In download mode through PC odin just Flash the single PIT file with ICS LPF stock rom (Yes you heard right) with repartition checked no other file just a single pit...
2. On success remove your battery go to download mode again and flash the whole LPF...once again with all the files (PIT, bootloader, pda csc and modem) again check repartion...It should boot with LPF.
Please confirm if it works.....
Click to expand...
Click to collapse
Oke ill try soon..
nandihno said:
This doesn't sound like the bug everyone is talking about because you odin from gb or something I am not understanding
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Yes.. Im flashing for gingerbread.. But stuck happen after odin success write all ICS files to device...
This is what odin do when you flashing..
First they will write all necessary file to their partition..
After the flashing success, tab will reboot into recovery for format the /system and copying the files for CSC files...and reboot again..
SO the rest of operation its from ICS kernel..
Correct me if im wrong..
chasmodo said:
And the bootloader is going to help how?
Click to expand...
Click to collapse
I think not..coz flashing will stuck, whatever file i choose..
it is safe if we flash LP9 together with LPF bootloader ?
thehackersz said:
it is safe if we flash LP9 together with LPF bootloader ?
Click to expand...
Click to collapse
Im Not sure.. but probability still same..
I have some friend with lpf bootloader and flashing the lp9 without issues..
but im not suggest you to do that..
suwandiapr said:
Im Not sure.. but probability still same..
I have some friend with lpf bootloader and flashing the lp9 without issues..
but im not suggest you to do that..
Click to expand...
Click to collapse
sad to see official ICS for our country effected with this annoying bug.
i even saw people do saying that the build date LPF rom is newer compared to LP9. Even though LP9 just released by Samsung.
JTAG not work..
I've always had this problem since Gingerbread when using Odin to flash fw downloaded from XDA.
My solution is shut down the phone, restart by inserting the USB Jig (enter flashing mode) and flash the kernel that I separately downloaded for rooting purposes.
It works every single time I hit such error.
maybe this can help
hey, while browsing through threads I found this
http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
maybe this will help you?
Im a total noob, hope some pro can give you better advice.
Good luck.
suwandiapr said:
i just make repack of dxlp9 with simg2img and ext4_utils..
Just unpacking factoryfs insert su and superuser with proper permission and then repack with mkuserimg.sh..
Tar with ustar..and then md5
When flashing im on stock gingerbread dxla1
All progress working well and odin say pass with the green sign..
After reboot an icon android robot make a progress bar like flashing..but it stuck for a long time.
I turn out the device and go to download mode again.. Try to flashing the stock odin dxlp9 but the result is same..
I try with the third. ..... And odin stuck at factoryfs.img.. Until 15 menit..
Last try.. Im use odin with stock gingerbread but still stuck at factoryfs.img...
Just wanna share all of this..
I will go to samsung center and will make a claim about it...
SO becarefull with ALL ICS release..
Im the unlucky one.. Isnt it?
Click to expand...
Click to collapse
for someone with the experience to repack their own ROM ,you certainly surprise me by completely missing the stickies and tens of threads posted about how dangerous ICS is.
you flashed a with a wipe ROM? and even if not a wipe ROM ,every ROM will do it's own formatting of cache and flashing some stuff from recovery on first boot
that's the bar you saw when you flashed .
any wipe or flash from ICS kernels has a good chance of locking up the emmc of your device ,thus giving you a brick.
I'd try my luck with the warranty claim if I were you ,just make sure to reset the flash counter first.
good luck

[BEWARE]Samsung made improvements against reseting flash counter

To start with, I'm flash addict and always trying to flash new roms/firmwares. However after flashing one of the newest samsung firmware i got this little red exlamation mark:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried to reset flash counter in a lot of ways but it always stayed at number "1" (After you reset with triangle away latest, opening app again shows 0 flash counter but after reboot it increases to 1). Even if my flash counter was 5, after reset it was staying with 1. Seems that samsung introduced some security improvements against reseting flash counter for galaxy s3.
But one xda member InsteadWoolf published solution to reset flash counter:
1- Reset via Triangle Away
2- Turn off phone and go to download mode.
3- Then flash via odin pc the stock firmware you want.
After this method flash counter is 0. However if you go for custom rom or not stock kernel, that red exlamation mark comes back and flash counter increases to 1.
BIG CREDITS TO InsteadWoolf
So what firmware are you claiming Samsung has hacked as i have yet to see this on any build .
jje
JJEgan said:
So what firmware are you claiming Samsung has hacked as i have yet to see this on any build .
jje
Click to expand...
Click to collapse
i cant say exactly because didnt notice when i got it but i think with the latest BLH3 one ics. Never had this problem before, was flashing a lot via pc odin and reseting to 0 easily. And before i had even flash counter 5 and there wasnt any red exlamation mark like in the picture.
Thanks for noticing.
But, damn but what greasy screen! You should clean it more often.
Theshawty said:
Thanks for noticing.
But, damn but what greasy screen! You should clean it more often.
Click to expand...
Click to collapse
it is with crap screen protector
Are you sure that has something to do with the flash counter?
Phew......
.....so glad that that **** didn't show up after flashing Jelly Bean over Odin!! :victory:
Something to look out for? What do you guys think?
// Ohamn
I had the same issue after flashing a miui rom i had to reset with triangle away and go into download mode straight away without letting the phone boot up then flash full stock ics via odin and it reset. It took me ages to work it out i nearly gave up.
Sent from my GT-I9300 using XDA Premium HD app
azcamm27 said:
I had the same issue after flashing a miui rom i had to reset with triangle away and go into download mode straight away without letting the phone boot up then flash full stock ics via odin and it reset. It took me ages to work it out i nearly gave up.
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
but if u flash something not official then u wont be able to reset again. This is smt new, never was like that
As i have flashed and reset at least 50 times in the last few weeks .
Reset counter with TA.
Flash custom kernel via Odin.
Nothing bar standard rom count of 1.
Run TA still nothing and counter 0 .
I wonder if something else is triggering the red mark .
jje
i reported it in OTA thread and also to Chainfire weeks ago, but no one took notice.. if anyone wants to test, i can upload example of such sboot.bin..
still everything is back to normal with flashing old sboot.bin
tumult said:
i reported it in OTA thread and also to Chainfire weeks ago, but no one took notice.. if anyone wants to test, i can upload example of such sboot.bin..
still everything is back to normal with flashing old sboot.bin
Click to expand...
Click to collapse
yeh please upload i will try it
EdgaBimbam said:
yeh please upload i will try it
Click to expand...
Click to collapse
which one new or old? anyway at work and going to business trip right after so I'll upload it ASAP.
tumult said:
which one new or old? anyway at work and going to business trip right after so I'll upload it ASAP.
Click to expand...
Click to collapse
hmmm if i want to remove that flash counter 1 with red exlamation mark i need to flash old one?
EdgaBimbam said:
hmmm if i want to remove that flash counter 1 with red exlamation mark i need to flash old one?
Click to expand...
Click to collapse
yes,
here is zip with old sboot.bin (from XXALEF), this is all i can do ATM, you have to unzip it and pack in tar (quick search gave me this link for making tar http://forum.xda-developers.com/showthread.php?t=1777579)..
and all standard things apply i am not responsible and blah blah if anything goes wrong, flashing bootloader is a sucker and may brick your phone..
edit: att. removed, look few posts bellow.
tumult said:
yes,
here is zip with old sboot.bin (from XXALEF), this is all i can do ATM, you have to unzip it and pack in tar (quick search gave me this link for making tar http://forum.xda-developers.com/showthread.php?t=1777579)..
and all standard things apply i am not responsible and blah blah if anything goes wrong, flashing bootloader is a sucker and may brick your phone..
1F0035205D32C9A06A3624E9E4C40E4F *sboot.zip
Click to expand...
Click to collapse
maybe there is who couls make .tar or cwm package of this file. Im not so good at developing and other things so dont want to mess things
EdgaBimbam said:
maybe there is who couls make .tar or cwm package of this file. Im not so good at developing and other things so dont want to mess things
Click to expand...
Click to collapse
i tried to make tar via phone, but got some error.. have to drive now, sorry
ps. there is thread in general section from as i9000 user with firmwares if i remember correctly with old bootloader
there, a Odin flashable tar.. tested by myself and my phone booted. see iff it helps with triangle away. thanks to secret unknown for instructions of making tar .
WARNING! if you brick it, you got to stick with it
D55F04C26C83CAA552B62F529E4434C2 *BEWARE_of_BRICK_i9300XXALEF_sboot.tar
edit: i flashed it via odin 3.04, edited .ini file to enable boot update and placed it in bootloader box.. don't know if editing ini is needed, but that's what i did and it worked.
PhoneBootUpdate=1
tumult said:
there, a Odin flashable tar.. tested by myself and my phone booted. see iff it helps with triangle away. thanks to secret unknown for instructions of making tar .
WARNING! if you brick it, you got to stick with it
D55F04C26C83CAA552B62F529E4434C2 *BEWARE_of_BRICK_i9300XXALEF_sboot.tar
edit: i flashed it via odin 3.04, edited .ini file to enable boot update and placed it in bootloader box.. don't know if editing ini is needed, but that's what i did and it worked.
PhoneBootUpdate=1
Click to expand...
Click to collapse
thx will try it
JJEgan said:
As i have flashed and reset at least 50 times in the last few weeks .
Reset counter with TA.
Flash custom kernel via Odin.
Nothing bar standard rom count of 1.
Run TA still nothing and counter 0 .
I wonder if something else is triggering the red mark .
jje
Click to expand...
Click to collapse
this was sboot that was problematic for me, i don't know if i gor it in one of NEE OTA JB leaks or in my country ICS official OTA update.

[Q] Grand 2 Duos SM-G7106 does not enter download mode

Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,
bro...
which andriod version he izz using??
haneef95 said:
Hello,
A customer gave a Grand 2 (SM-G7106) for service, to have a custom rom & recovery installed.
I've been trying to use the method that's available in all the forums (put the phone to download mode, connect it to odin & etc...).
But the phone does not go into download mode in the first place for some reason.
Rather, when I keep holding Vol Down + Home + Power (or Vol Down + Power only) , a screen flashes to say 'Factory mode' for like 2 secs & then, I get these options
So, I tried, Vol Up + Power & I get these options
Please give me a solution to this.
Thanking you all in advance,
Click to expand...
Click to collapse
I think its not the original set it must high copy so its not going to the download mode .
Andriod version
PKothavale said:
which andriod version he izz using??
Click to expand...
Click to collapse
4.4.X, can't remember what that X was!
kemesh said:
I think its not the original set it must high copy so its not going to the download mode .
Click to expand...
Click to collapse
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?
haneef95 said:
Not sure, it only came for service.
How do I distinguish between original & duplicate?
Even then, is there any solution to this problem though?
Click to expand...
Click to collapse
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
---------- Post added at 11:56 AM ---------- Previous post was at 11:39 AM ----------
PKothavale said:
If its an 4.4.X version then u can use balliboxer's new kikat superior rom u can directly insatll it from recovery mode/install a zip...but bro if it doesnt has base of version 4.4.x be aware device can be bricked...
Click to expand...
Click to collapse
And Be aware if it gets any error dont downgrade it again to 4.3 aware !!! it will make ur device hard brick...
Hey buddies,
I got a 4.3 Samsung SM-G7106, with G7106ZNUANK1 from China Unicom (CHU). unfortunately, I can't root it properly. Tried CF-Root, TowelRoot and Framaroot but no luck.
I hope you can help me out guys, thanks!
May be it is super copy for grand 2,,try to chek with cpu identifier or cpu z,,
Sent from my SM-G7102
Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!
chopsuey8 said:
Nah, its not a supercopy, just found out that one of my friend was also using the same phone, same specs, same everything and he bought it on Samsung Store in China (He presented me with the copy of the receipt and box stuffs), so yeah, I think its a legit one since its running well on Kies also (unlike other copy phones which can't be detected thru Kies). Anyway, I found a root program from G7106ZNUANC1 and I forgot the other one, its thru SRS root, but didnt work for my phone unfortunately. :crying:
Hope someone could help me root my G7106ZNUANK1 soon!
Click to expand...
Click to collapse
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck
prakash87 said:
Flash CWM or TWRP through odin..den flash su binaru 2.45 from recovery. su binary 2.45 available in chainfire site.Gud Luck
Click to expand...
Click to collapse
Thanks for the tutorial buddy! Is it possible you can walk me thru it? Even though I'm kinda lurking here for quite some time, still some things are alien to me. I hate to say this, but, can you spoon-feed me the instructions in doing so? Would really appreciate your help!
Thanks! :good:
Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.
sacp said:
Hi.
I just got also a Grand 2 G7106, and does the same thing - chinese menus instead of recovery mode. Found a video on youtube that explained which single item does, and most are only a bunch of tests, and one for factory reset, but still with this same issue.
I also would like to know how to use odin without entering in download mode.
Click to expand...
Click to collapse
Hey buddy, try using SRS root software if you wanted to root your phone. If you're lucky enough that its not the G7106znuank1 model, then it can be rooted thru it. Otherwise, you'll be stuck like me. lol.. good luck! :good:
looks like i am stuck with you guys too. Have the same Samsung SM-G7106 . I tried using ODIN to install CWM. Despite Odin saying that it is PASS and device rebooted itself, when i try to go into recovery mode (CWM) it goes into default Android recovery mode instead with (write protected) ... i tried TWRP too using ODIN and it is not working. Tried both Odin 3.09 and 3.10
If you're still looking for a way to root your SM-G7106, I managed to do it with the KingoRoot app.
super simple process. It's based on Chainfire.
I should mention this was with: G7106znuank1
I have a grand 2 g7106 hard bricked and it is totally dead how to solve this problem please help.
Thanks in advance

[Q] HELP! No wifi no camera no Sound on Samsung S4 GT-I9505 after flashing stock

hi there . i am new here and a noob .. i flashed my galaxy s4 gt-i9505 with stock ROM "I9505XXUBMEA" with odin after rebooting i have no sound ,when i launch the camera the device turn off ,WiFi wont turn on.
Please is there any repair for this. I don't care about any warranty or anything. I just want the device fully working with sound and wifi and camera on stock ROM. Please is there any solution to this problem, cant find the solution anywhere it does not matter jelly been or kitkat just working stock rom .thanks in advance.
version:
AP:I9505XXUBMEA
CP:I9505XXUBMEA
CSC:I9505XXOXXBMF1
Adroid Version: 4.2.2
Baseband: I9505XXUFNB9
Kernel Version: 3.4.0-768421
[email protected] #1
Why did you flash 4.2.2? My guess is your were on at least a 4.3 rom. Flash one of the latest roms. Atleast a 4.4.2 rom.
Lennyz1988 said:
Why did you flash 4.2.2? My guess is your were on at least a 4.3 rom. Flash one of the latest roms. Atleast a 4.4.2 rom.
Click to expand...
Click to collapse
I tried Lollipop it didn't work i was stuck in bootloop so i roled back to original one 4.2.2 . i also had the boot message "kernel is not seandroid enforcing set warranty bit kernel" .can u please suggest me what to do .
neoom said:
I tried Lollipop it didn't work i was stuck in bootloop so i roled back to original one 4.2.2 . i also had the boot message "kernel is not seandroid enforcing set warranty bit kernel" .can u please suggest me what to do .
Click to expand...
Click to collapse
Just flash the latest Lollipop again and it should be fixed.
What do you mean Lollipop didn't work? It works, so what steps did you take?
Lennyz1988 said:
Just flash the latest Lollipop again and it should be fixed.
What do you mean Lollipop didn't work? It works, so what steps did you take?
Click to expand...
Click to collapse
i just flashed it with latest Lollipop rom , but didn't start just bootloop , idid factory reset, wipe cache didn't work stuck in bootloop.
neoom said:
i just flashed it with latest Lollipop rom , but didn't start just bootloop , idid factory reset, wipe cache didn't work stuck in bootloop.
Click to expand...
Click to collapse
It should work. What version did you try to flash?
maybe you must more wait? Lollipop long boot after first clean install
Lennyz1988 said:
It should work. What version did you try to flash?
Click to expand...
Click to collapse
this one : I9505XXUHOB7_I9505OXXHOB4_I9505XXUHOB7_HOME.tar
neoom said:
this one : I9505XXUHOB7_I9505OXXHOB4_I9505XXUHOB7_HOME.tar
Click to expand...
Click to collapse
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
https://mega.co.nz/#!R9YCjT5T!npRgHavTtiLTDOA3VNgwModN2zsz-q34rWIt5q3Cv1I
Wait at least 20 minutes for it to boot.
Lennyz1988 said:
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
Wait at least 20 minutes for it to boot.
Click to expand...
Click to collapse
thks i will try it . i have a bad connection so it will take some time .i will feed back after .
KoNd2i0 said:
maybe you must more wait? Lollipop long boot after first clean install
Click to expand...
Click to collapse
i had a bootloop not a long boot .it just keep rebooting
Lennyz1988 said:
1. Perform a factory rest now
2. Try flashing that firmware again. Redownload it just to be sure.
Wait at least 20 minutes for it to boot.
Click to expand...
Click to collapse
ok just finished flashing . the same problem persist i bypassed the boot but still can't turn on wifi also no sound no camera .what to do ?
Hi, I have same problem as neoom. After flash to LP phone doesn't make any sound at all and the camera is off. I've tried flashing with firmware from Lenny1988 twice but it didn't change anything. I've tried flashing new modem and bootloader - still no sound. Anyone could help?
Use kies tool to upgrade your phone. Go to tools, firmware upgrade and initialization, enter the model number (ex : GT-I9505 with capital letters), then the s/n that you will find on the back sticker behind battery and kies will find and restore the correct csc, will repartition your phone, will wipe all the partitions and will flash the most appropriate firmware for your phone depending on the correct region. Your wifi and camera may not work because toy have a mismatching cp and ap so let the Samsung kies do the job for you remember not to connect the phone while inputting the model number and sn but only when it tells you to connect it in Odin mode.
Kies says GT-I9505 does not support initialization.
neoom said:
ok just finished flashing . the same problem persist i bypassed the boot but still can't turn on wifi also no sound no camera .what to do ?
Click to expand...
Click to collapse
The flashing was succesfull right? Odin gave no errors?
Then flash the firmware again only in this case with a pit and re-partition.
Get the pit from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Maybe you are using the wrong version of Kies? Use Kies3. Because as you can see in this image, i can start initialization.(i cannot enter S/N because i have the gt-i9506) but pay attention to the capital letters! Write it down as the sticker behind the battery sais!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lennyz1988 said:
The flashing was succesfull right? Odin gave no errors?
Then flash the firmware again only in this case with a pit and re-partition.
Get the pit from here:
[/QUOTE]
,i tried this methode now...art. tried wipe data .and cache same issue .
Click to expand...
Click to collapse
nikosdd said:
Maybe you are using the wrong version of Kies? Use Kies3. Because as you can see in this image, i can start initialization.(i cannot enter S/N because i have the gt-i9506) but pay attention to the capital letters! Write it down as the sticker behind the battery sais!
Click to expand...
Click to collapse
Let me be clear - of course i used Kies3, I'm getting the messege of not supported model after entering proper serial number (checked in Settings menu in phone and on the back sticker).
Hmm that's really weird. Then try to start this procedure while phone is connected to kies. I've done this on a i9505 to friend of mine so I know that there is a way to filly restore phone. Otherwise download the official rom from sammobile depending on your country and flash it via Odin.

Categories

Resources