custom rom installation question - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hello,
i m having problems with getting a custom rom to work.
its a AT&T Galaxy S4
I337
Baseband MK2
i rooted the phone....then installed safestrap....
went into safestrap and created a backup. and then installed one of the following files (after each other) on the phone.
aokp_4.3_jflteatt_task650_10.22.2013.zip
CARBON-JB-NIGHTLY-20130906-0328-jflteatt (1).zip
pa_jflteatt-BETA-3.99-RC2-20130922.zip
The Task 650 showed the horse head for a second but went into a thousand blinking lights afterwards.
the Carbot didnt do anything.
and paranoid android showed the shark head loading screen but didnt move on from there.
so none of these 3 worked and i always had to restore the backup.
am i using the wrong roms? am i missing a step? if you could help me out that would be greatly appreciated.
thank you
Ben

You need to use touchwiz based roms

jd1639 said:
You need to use touchwiz based roms
Click to expand...
Click to collapse
alright...now comes the stupid question....
what is a touchwiz rom? and where do i find it?

ben9000 said:
alright...now comes the stupid question....
what is a touchwiz rom? and where do i find it?
Click to expand...
Click to collapse
Start here and use stock based.
Sorry, forgot the link http://forum.xda-developers.com/showthread.php?p=42266401

Why are you trying to flash roms if you don't know what they are? Or what base they are to begin with? What are your long term goals of having a custom rom?
Sent from my SGH-I337 using Tapatalk

Related

[Q] Need help with rooting my gs4 SGH-I337

Ok so im a total noob when it comes to this and i would like to root my phone, put a custom rom on it maybe either pac rom or like cyanogenmod 11, and if i can get 4.4 kikkat and get rid of bloatware if i can even do that like idk how this all works...so if anyone could help me with step by step on how to root then back up then put a custom rom that would be absolutely great!
Calamity Baird said:
Ok so im a total noob when it comes to this and i would like to root my phone, put a custom rom on it maybe either pac rom or like cyanogenmod 11, and if i can get 4.4 kikkat and get rid of bloatware if i can even do that like idk how this all works...so if anyone could help me with step by step on how to root then back up then put a custom rom that would be absolutely great!
Click to expand...
Click to collapse
What firmware are you running? If you want help you need to provide more information. If you are on mf3 or mk2 you can not flash any Cyanogenmod based roms. You need to slow down, search XDA & read the threads before you flash something and brick your phone.
John The Rhino said:
What firmware are you running? If you want help you need to provide more information. If you are on mf3 or mk2 you can not flash any Cyanogenmod based roms. You need to slow down, search XDA & read the threads before you flash something and brick your phone.
Click to expand...
Click to collapse
I am running 4.3 jelly bean and i have mk2...
Calamity Baird said:
I am running 4.3 jelly bean and i have mk2...
Click to expand...
Click to collapse
You can not flash those roms on your phone!
Here is the guide for your mk2 S4. Please read it. It will explain how to root, install Safestrap recovery (NO TWRP or CWM), and has a list of Touchwiz roms that are compatible for our beloved S4.
http://forum.xda-developers.com/showthread.php?t=2616221.
Please thank the op in the threads. So many people have put a lot of work into this guide to help us. Good luck & post your progress.

[Q] ASOP Looking rom with touchwiz kernel

Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.
Thr33-F0ur said:
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.
Click to expand...
Click to collapse
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?
koszor said:
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?
Click to expand...
Click to collapse
Yes. You'll have to goto blackboxroms.com for the download.
koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.
4ndroid99 said:
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.
Click to expand...
Click to collapse
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?
koszor said:
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?
Click to expand...
Click to collapse
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.
4ndroid99 said:
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1
koszor said:
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1
Click to expand...
Click to collapse
What roms did you try?
4ndroid99 said:
What roms did you try?
Click to expand...
Click to collapse
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
Did you flash the nb1 kernel modules immediately after flashing the rom?
koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
GoldenEye requires you to replace the updater script, did you do that?
Thr33-F0ur said:
Did you flash the nb1 kernel modules immediately after flashing the rom?
Click to expand...
Click to collapse
yes, and then i booted to odin mode to flash the 3 other files in the BL AP and CP slots
4ndroid99 said:
GoldenEye requires you to replace the updater script, did you do that?
Click to expand...
Click to collapse
im going to try this again, i missed that part
Moderator Edit: Thread about rom with specific features begets replies about roms that are great to try. The roms with the features iterated n the OP are the ones that you discover by looking, reading, comparing, and flashing. Thread closed.

[Q] Need help with Custom ROM

I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Bbychaos said:
I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Click to expand...
Click to collapse
which firmware are you coming from? Are you flashing the right kernel modules?
Thr33-F0ur said:
which firmware are you coming from? Are you flashing the right kernel modules?
Click to expand...
Click to collapse
I'm on 4.3 trying to get on 4.4
I'm not completely sure about the kernel. I tried 2 different ones with ProjectChaos
http://forum.xda-developers.com/showthread.php?t=2680868
Sent from my SGH-I337 running GPE using Tapatalk
Check this thread out as well please:
http://forum.xda-developers.com/showthread.php?t=2616221
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Gage_Hero said:
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Click to expand...
Click to collapse
Yes I am.
I'll check out the links. I've been busy so I haven't been able to try anything just yet. I'll report back when I get to mess with it
rugmankc said:
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Click to expand...
Click to collapse
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Bbychaos said:
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Click to expand...
Click to collapse
Glad you got it.
Sent From My Samsung Galaxy S4

[Q] [QP] Can I flash roms?

Hi all, I am fairly new to this whole rooting process for android devices, since i have just recently purchased a galaxy s4 from at&t. Just a few days ago, i've decided to root my device, and after hours of researching i came across geohot's towelroot program and successfully rooted my GS4!. Now i want to install a custom rom, and i would like to know what kind of custom recovery can i use? and am i able to install the cyanogenmod 11? I have downloaded the cyanogenmod installer and it says my device is not supported, but i read on their wiki that i can install it manually but i don't know if my current build is supported by Clockworkmod, or even TWRP for that matter. I havn't flashed any roms by the way and i don't plan on doing so until i am almost certain that i can flash it without bricking.
I am running kitkat 4.4.2 Samsung SGH-I337, my baseband/build number is I337UCUFNC1
Any help would be greatly appreciated thanks!
We have a locked bootloader. So, stock kernel and recovery cannot be replaced. The only recovery we have is safestrap.
http://forum.xda-developers.com/showthread.php?t=2616221
Ahh that sucks thanks for the info. Hopefully they will find a way to unlock it in the future so I can install the cyanogenmod.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Soulflame22 said:
Ahh that sucks thanks for the info. Hopefully they will find a way to unlock it in the future so I can install the cyanogenmod.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Lots of info in General on what you can do--it is not too bad--:good:
rugmankc said:
Lots of info in General on what you can do--it is not too bad--:good:
Click to expand...
Click to collapse
Yea, i will look in to it. But I am going to do more research before actually flashing a rom, Better safe than sorry haha
Soulflame22 said:
Yea, i will look in to it. But I am going to do more research before actually flashing a rom, Better safe than sorry haha
Click to expand...
Click to collapse
☺
Sent From My Samsung Galaxy S4

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk
Thanks for the help-trying it out now. Will keep ya posted
freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

Categories

Resources