Database Users

HELP needed!

Hi everyone - thanks in advance for your help.
I have tried to get 4.4 paranoid android running on my nexus 4 - however, CWM is not working (can't enter recovery, nor can I flash it in ROM Manager -- it says "an error occurred while flashing your recovery"), and I do not have any of the google apps.
I have not gone into this stuff for many years (did it on an old xperia), but unfortunately got into this whole mess when I bought this nexus which I didn't realize until after was rooted. Anyhow, can someone please provide a link with a straight-forward step-by-step process for how I can get this phone working again, back to stock, with google apps and everything? In simple terms would be great, from start to finish.
I really do apologize in advance for my amateur knowledge coming into this. In essence, I am simply trying to get around issues that came up after having bought a rooted nexus 4. But now in flashing Paranoid Android CWM won't work and I can't flash any google apps as a result.
Thank you, thank you, and thank you.

Hello,
Actually, rooting yor phone is not the problem, btw you can check this link: http://forum.xda-developers.com/showthread.php?t=2534160 to back your n4 to stock 4.4.
You will need to unlock your bootloader before, however it is simple and the instructions is on the link too.

tiago_s said:
Hello,
Actually, rooting yor phone is not the problem, btw you can check this link: http://forum.xda-developers.com/showthread.php?t=2534160 to back your n4 to stock 4.4.
You will need to unlock your bootloader before, however it is simple and the instructions is on the link too.
Click to expand...
Click to collapse
The bootloader is actually unlocked. Thank you for the link though, I will give it a whirl.

[Q] LG G2 D802H, Root help.

Hey guys.
I am not that new in the whole rooting "scene" but it seems that I am unable to find a proper guide for rooting my (updated) phone. Every guide I have found, not only in this site, is outdated for like a year or so or just for older versions of the firmware, and if there is one thats for D802H(international model, I'm from Greece) it's probably in really bad english or directed towards pros. I rooted my G2 when I got it last year but decided to unroot because of some problems with the screen so I could use my warranty and haven't rerooted since. So it would be really helpful if any of you could point me in a certain guide or just run me through the whole process of rooting my phone, what to download, what to do to my phone, the recoveries etc. I would really like to use Cyanogen Mod or a G3 mod. Certainly, my choice for these two is because they look awesome. If you have any other rom on your mind that might be better than these, please dont hesitate from telling me. I really need all the help I can get, last time I got stuck on a boot loop and didn't know what to do for many hours before I reflashed to stock. So basically I would like a root guide ( found one from a member called somboons, seemed nice but wasn't really thorough as to whether I should wipe all data or just wipe dalvik cache and really wasn't noob-friendly) and a link to a ROM download page with a guide for flashing it. Not really into kernels, so if you could suggest a different one from stock that provides better battery life etc. that would be great. Any other info that you feel I should know will be appreciated.
Thanks in advance guys and sorry for the trouble I'm putting you,
George.
P.S.: Would like to avoid wiping data if at all possible.

search for stump root apk

zekurosu said:
search for stump root apk
Click to expand...
Click to collapse
Oh well that was easy, thanks man. Rooted succesfully, installed SU and now have TWRP. What about the ROM? For CM, should I just go in their site and pick one for my phone? Is a release here that's stable?

giorgos123 said:
Oh well that was easy, thanks man. Rooted succesfully, installed SU and now have TWRP. What about the ROM? For CM, should I just go in their site and pick one for my phone? Is a release here that's stable?
Click to expand...
Click to collapse
if CM11 .. try the latest Milestone ... as for CM12, it is still alpha stage, so try at your own risk

A Big thanks for the CM11 Bigpart Project

Hello. originally i wanted to post this in the CM11 thread, but due to the fact that i am a new user, i cannot.
i wanted to thank Zn7mkUKzN1r8aCIV, and all the other developers who contributed the the BigPart project.
the phone is now working great, far better than the CM10 version. it's like a new device.
in my gratitude i would like to upload the files required for the upgrade:
mega.nz/#!19BCUIBL!L0e2-HEsaTOvRnXmyi1n6dYf4nfw-FxrzOeYdfdrIKg
this also includes the Gapps installation file, and the drivers requierd for the device.
Thank you again!

Orof said:
Hello. originally i wanted to post this in the CM11 thread, but due to the fact that i am a new user, i cannot.
i wanted to thank Zn7mkUKzN1r8aCIV, and all the other developers who contributed the the BigPart project.
the phone is now working great, far better than the CM10 version. it's like a new device.
in my gratitude i would like to upload the files required for the upgrade:
mega.nz/#!19BCUIBL!L0e2-HEsaTOvRnXmyi1n6dYf4nfw-FxrzOeYdfdrIKg
this also includes the Gapps installation file, and the drivers requierd for the device.
Thank you again!
Click to expand...
Click to collapse
hi
very good. He resurrected my atrix 4g. thanks.

klecioclayton said:
hi
very good. He resurrected my atrix 4g. thanks.
Click to expand...
Click to collapse
Glad i could help

Thanks Zn7mkUKzN1r8aCIV and polesapart again!

Downloading it now!
Guys, I know the thread is kinda old, but I gotta give it a try as I too want to revive my atrix 4g
I tried to flash CM11 from the original post (http://forum.xda-developers.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281), however, when I perform "FASTBOOT flash recovery recovery_olympus_kitkat_bigpart_finalv2.img", the "Android Recovery" crashes when selected from the menu and I get stuck in a loop where it tries to initialize the option unsuccessfully. Can you please shed some light?? I`ve already tried flashing the hporsche32 recovery and still no success...it`s becoming a bit frustrating.
My phone is a bell atrix D00, already rooted and unlocked. I am currently using the NottachTrix rom, and it installed fine from my original cwm-based recovery (v5.0.2.7-atrix5).
The last attempt I made was trying to install the zip from my previously installed and reliable recovery (v5.0.2.7-atrix5), but it fails with "some symlinks failed"...I'm guessing it is due to not having used the bigpart recovery.

[Solved]
MangoShoot said:
Guys, I know the thread is kinda old, but I gotta give it a try as I too want to revive my atrix 4g
I tried to flash CM11 from the original post (http://forum.xda-developers.com/atrix-4g/development/rom-cm-11-android-4-4-4-atrix-bigpart-t2847281), however, when I perform "FASTBOOT flash recovery recovery_olympus_kitkat_bigpart_finalv2.img", the "Android Recovery" crashes when selected from the menu and I get stuck in a loop where it tries to initialize the option unsuccessfully. Can you please shed some light?? I`ve already tried flashing the hporsche32 recovery and still no success...it`s becoming a bit frustrating.
My phone is a bell atrix D00, already rooted and unlocked. I am currently using the NottachTrix rom, and it installed fine from my original cwm-based recovery (v5.0.2.7-atrix5).
The last attempt I made was trying to install the zip from my previously installed and reliable recovery (v5.0.2.7-atrix5), but it fails with "some symlinks failed"...I'm guessing it is due to not having used the bigpart recovery.
Click to expand...
Click to collapse
Hey guys, first of all, thank you Z and P! my atrix is now revived and I can enjoy it once more! what a great job. So far, really stable (although the screen don't light up until de end of some calls). Battery is doing great!
After some reasearch I found out I should be using the hporch32 recovery. Turns out I also needed to flash the hporch32 boot with "fastboot flash boot boot_olympus_kitkat_bigpart_hporch32_finalv2". I know it was silly, but the guides don't really cover this situation....
Anyways, thank you very much for this gift! Hope this helps other noobs!

How to install Cyanogenmod?

Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?

You may just want to wait if you are asking these questions. CM is still in alpha stages anyways, not everything is working for it to be a daily driver imo.

CM is definitely outta alpha stages

trev23sks said:
CM is definitely outta alpha stages
Click to expand...
Click to collapse
You cafe to back that statement up? Like, what isn't working, and. Your source?
Sent from my 2PS64 using XDA-Developers mobile app

And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.

mcwups1 said:
And, this hasn't been answered.
I've Super CID.
I've RUU'd to the latest Sprint version, and I just sit at the boot animation forever.
Click to expand...
Click to collapse
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.

GROOVYJOSHCLARK said:
That is because you cannot do it that way which is why you bootlooped. The CM threads speak of this numerous times. You need to RUU the US developer, then FLASH a Sprint variant ROM (like Bad Boys), then wipe and install CM which will work. The other option is to just use the developer edition with SuperCID/MID and then CM will work without flashing back to Sprint ROM's. I would go with the first option as you will gain better LTE as you wont be on Sprint's "global" connections.
Click to expand...
Click to collapse
Flash a Sprint ROM, or the Sprint firmware?
Thank you in advance for your help.
Also, which one of the RUU do I grab?
There are many, many RUU's. Which am I looking for?

discomaniac said:
Very confused about the process of installing Cyangenmod on my phone. How do I install the unlocked firmware?
Click to expand...
Click to collapse
PM me
Sent from my HTC 10 using XDA-Developers mobile app

Such a shame this thread went to PM. It seems like it would have been good basic information for experienced flashers whom are new to the HTC world. I came from the Galaxy S5 (SM-900R7 nTelos variant), and had been testing out LineageOS 14.1 on it (as an update to CM13, which I was building myself). This thread would have been helpful to help flash the HTC10 version. Still learning it. Quite different from the Samsungs, for sure!

would someone mind either posting in the thread or PM me back with a link or guide, step by step how to install Cyanogenmod. I have rooted a few Samsung phones before, but once I have them rooted and running stable I usually leave them alone...point being I have not rooted a phone in two years....
I'll be getting my HTC 10 Sprint phone tomorrow, so I would love a full step by step how to root, install twrp and finally how to install the ROM...BTW I used to run a ROM called liquid smooth....does that ROM still exists?
Is Cyanogenmod the best most stable ROM for the HTC 10 Sprint?

Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.

I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.

any ideas?

King of the Couch said:
I can't seem to find the instructional thread..? I've been rooting & flashing HTC phones since the HTC 4G LTE, but this thing is a different beast entirely. I've unlocked via HTC Dev, installed unofficial TWRP 3.0.3-9, flashed the custom SU, & installed Viper (did all that from stock N). Viper is definitely super solid, but I've always preferred the CM/AOSP platform. I've wiped the internal like I've done a thousand times & flashed Lineage + gapps (arm64). the phone boots & gets to the lineage boot animation & sits there indefinitely. I let it sit for almost an hour, & obviously it wasn't going to boot.
What am I missing, guys? Any & all help will be greatly appreciated.
Click to expand...
Click to collapse
They dont have any roms built for the CDMA 10, notice there are no CM or AOSP roms in the SPrint htc 10 rom section. It probably didn't boot completely cause of a kernel mismatch.

there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
i can't seem to find your instructional thread man.

King of the Couch said:
there are people in the LOS thread saying they're on Sprint running it. I just can't follow their methods, which is why I was hoping for a tut.
---------- Post added at 12:03 AM ---------- Previous post was at 12:02 AM ----------
i can't seem to find your instructional thread man.
Click to expand...
Click to collapse
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049

trev23sks said:
Im going to help the community as much as i can lol i'm going to start a separate thread on how to install Lineage sometime this weekend when i have time ..mind you this is my first time starting one so bare with me.
Click to expand...
Click to collapse
drob311 said:
The solution has been discovered by @The Fer-Shiz-Nizzle!
Flash the file in this post. You must be s-off. Works perfectly.
https://forum.xda-developers.com/showpost.php?p=71388292&postcount=1049
Click to expand...
Click to collapse
just flash that single file then install the rom/gapps? that's pretty simple..

King of the Couch said:
just flash that single file then install the rom/gapps? that's pretty simple..
Click to expand...
Click to collapse
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Sent from my Sprint HTC 10 using Tapatalk

The Fer-Shiz-Nizzle said:
That's all you need. Must be S-off. Rename to 2PS6IMG.zip and place on root of ext SDcard. Reboot to Download mode and accept the prompt to flash the file. Reboot back to recovery, make the proper wipes and flash ROM & Gapps. Reboot and enjoy AOSP/LOS!
Click to expand...
Click to collapse
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy! ?

drob311 said:
Correct. You must be S-Off to do this. Put the .zip file, named 2PS6IMG.zip, on the root of your ext sd card, reboot to bootloader and flash it. After successfully flashing that file, you'll be able to run AOSP without issue. Like you said, download and flash. Enjoy!
Click to expand...
Click to collapse
I am seeing two different instruction steps in the posts and just want to be sure i got this right. Do we flash the sd card zip before or after flashing an AOSP rom and gapps? Also, is there any particular aosp rom that works best for this method?
thank you!

Moto X Pure help asap

I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver

Philo0o said:
I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver
Click to expand...
Click to collapse
What do you mean by it just stays open. Do you mean it never boots? Like a bootloop? If so, search 7.0 ROMs bootloop, you'll find the solution, tons of threads on the help and q&a here. But if you don't mean what I just explained then could you clarify?

Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.

Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
If I were you I would flash back to stock and make sure you you don't have a hardware problem, If nothing else it's a chance to start over. I haven't gone to custom roms for these reasons, mine is my daily driver to and I can't afford to get caught without it.

Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
No worries. Yeah I don't know what the issue could be, could be a ROM issue, it's weird though, but like the poster above me, it could be hardware failure and flashing stock would be a good way to find out.

I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?

Philo0o said:
I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?
Click to expand...
Click to collapse
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.

tbkrazeey said:
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.
Click to expand...
Click to collapse
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!

Yeh before i started flashing roms i was on stock 6.0, thank you so much

Spencervb256 said:
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!
Click to expand...
Click to collapse
I think I might also do a twrp backup of my 7.0 and make it public, but it will take me a couple of days before I can factory reset. There doesn't seem to be any stock 7.0 backups around on xda.
Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
That's good news actually, there's a lot more stuff around for 6.0.

Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
Alright if you wanna go the custom ROM route, don't update to stock 7.0, not many custom ROMs work with it's new firmware. I'll get you a guide to go back to stock 6.0 then!
Edit: Alright @Philo0o, here's a good page with all the firmware links for your phone, and the commands to flash the firmware are there for you. Let me know if you have any questions about that.
Also, when your ROMs aren't working, what are you doing to try again? what I mean is you could try a full data format in twrp. Not just a wipe of data, system, etc.. A full format isn't quite like going back to stock, but it may help if there are leftovers somewhere causing issues if that makes sense.
so if you wanna try a full format, backup your internal storage to a computer, or to an sd card, and then format, and then you will have a clean slate, move what you need back over to your phone and voila!

Ill look through that tutorial, and whenever i flash a rom i do a full a wipe

Philo0o said:
Ill look through that tutorial, and whenever i flash a rom i do a full a wipe
Click to expand...
Click to collapse
Alright, then yeah look through that tutorial. If the issue isn't there on stock, but is on custom ROMs, try asking in those threads