I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver
Philo0o said:
I posted the same thread a week ago and got no help. My moto x has a problem that whatever rom i flash it just stays open for a few minutes then restarts so it's unusable. Please any suggestion is needed as this is my daily driver
Click to expand...
Click to collapse
What do you mean by it just stays open. Do you mean it never boots? Like a bootloop? If so, search 7.0 ROMs bootloop, you'll find the solution, tons of threads on the help and q&a here. But if you don't mean what I just explained then could you clarify?
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
If I were you I would flash back to stock and make sure you you don't have a hardware problem, If nothing else it's a chance to start over. I haven't gone to custom roms for these reasons, mine is my daily driver to and I can't afford to get caught without it.
Philo0o said:
Sorry for not being clear, i dont think it is bootloop. It boots into the rom no issues and i can use it normally and doesn't restart till a few minutes no matter what rom i flash.
Click to expand...
Click to collapse
No worries. Yeah I don't know what the issue could be, could be a ROM issue, it's weird though, but like the poster above me, it could be hardware failure and flashing stock would be a good way to find out.
I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?
Philo0o said:
I would love to go back to stock but how? All the tutorials are very hard for me to follow can you guide me to an easy one or tell me how?
Click to expand...
Click to collapse
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.
tbkrazeey said:
I agree that they are a little hard to follow, I looked at them myself and it looks like the quickest way would be to go back to 6.0 and upgrade back to 7. But someone else could correct me on that.
For future reference, it's best to always twrp backup your stock rom before doing any kind of major changes especially custom roms. That way you can always fall back to original if something goes wrong.
Click to expand...
Click to collapse
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Spencervb256 said:
I would go back to stock 6.0, if he hasn't upgraded to 7.0, I'll do some digging, find good guides, and post them here in a bit @Philo0o!
Click to expand...
Click to collapse
I think I might also do a twrp backup of my 7.0 and make it public, but it will take me a couple of days before I can factory reset. There doesn't seem to be any stock 7.0 backups around on xda.
Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
That's good news actually, there's a lot more stuff around for 6.0.
Philo0o said:
Yeh before i started flashing roms i was on stock 6.0, thank you so much
Click to expand...
Click to collapse
Alright if you wanna go the custom ROM route, don't update to stock 7.0, not many custom ROMs work with it's new firmware. I'll get you a guide to go back to stock 6.0 then!
Edit: Alright @Philo0o, here's a good page with all the firmware links for your phone, and the commands to flash the firmware are there for you. Let me know if you have any questions about that.
Also, when your ROMs aren't working, what are you doing to try again? what I mean is you could try a full data format in twrp. Not just a wipe of data, system, etc.. A full format isn't quite like going back to stock, but it may help if there are leftovers somewhere causing issues if that makes sense.
so if you wanna try a full format, backup your internal storage to a computer, or to an sd card, and then format, and then you will have a clean slate, move what you need back over to your phone and voila!
Ill look through that tutorial, and whenever i flash a rom i do a full a wipe
Philo0o said:
Ill look through that tutorial, and whenever i flash a rom i do a full a wipe
Click to expand...
Click to collapse
Alright, then yeah look through that tutorial. If the issue isn't there on stock, but is on custom ROMs, try asking in those threads
Related
Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks
skrapi said:
Hey guys, I am having trouble flashing a new rom onto my phone. I used to flash my Galaxy S3 almost every day, and for some reason, I am having trouble with the S4. I have rooted it, and installed Team Win Recovery Project v2.5.0.2 and sometimes the Rom will flash and work, like PA worked first time, so did MIUI Rom, but trying Most of the others they either say failed, or... they go through the whole installation process through the Recovery for Android Revolution HD, and then it boot loops, take battery out, put back in and wipe everything and it just stays on the first Samsung Logo and that's it.
Is there something I am missing?
I am wiping eveyrthing as well before I do it.
Any help will be really appretiated
Thanks
Click to expand...
Click to collapse
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:
Disturbed™ said:
Can you please elaborate this situation without any hassle.? Didn't get your properly. Come again.?:cyclops:
Click to expand...
Click to collapse
My bad lol, in work and was typing fast.
Basically, when I flashed ParanoidAndroid on my phone, and it worked great, then I changed it to MIUI which worked great,
then I decided to Flash Omega Rom, which was fine, but the WIFI doesn't work for me.
So I tried to Flash Android Revolution and it goes through the Installation Process with no problems and goes into Boot Loop, even though I have done a full wipe of the device.
I am in the middle of Flashing Android Revolution now, for the 3rd time, and it has been on 10% installation for 10 minutes. This is all it says at the moment...
===========================
Android Revolution HD by mike1986
===========================
>>>Formatting partitions
(system is unmounted already)
(preload is unmounted already)
-- that's it --
Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.
skrapi said:
Sorted, thanks anyway.
Just incase someone else is in the same situation,
All I did was take the battery out for 30 minutes or around that time, and just flash the rom, I didn't wipe or anything else, just flashed and done.
For people having Wifi issues, flash a different Kernel like Adam Kernel, that seems to work for me.
Click to expand...
Click to collapse
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4
Disturbed™ said:
Good to see that. BTW Can u prefix solved in ur subject?
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.
skrapi said:
Yea sure no problem. How do you do it though? I have had a look but have no idea lol.
Click to expand...
Click to collapse
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4
Disturbed™ said:
Just edit ur first post and select advance edit. Then u can change it.
Or just double click over subject line for this thread in subforum.
Sent from my Disturbed™ Galaxy S4
Click to expand...
Click to collapse
Sweet, cheers mate = )
Hello All,
I am attempting to return my A501 to stock ICS from full rom package in the dev thread that is sticked.. Can anyone please tell me if it will remove the Skrilaz bootloader? if so will that break anything??? I currently have 4.4.2 Omni rom on it and it randomly restarts well, when ever it feels like it and i need it to work 85% of the time at least. Thanks In Advance.
When you get back to stock, you will loose your: data, ROM, recovery and bootloader as well. But then you would have a clean tablet that you can unlock again, and install your favourite ROM.
rickdtweet said:
When you get back to stock, you will loose your: data, ROM, recovery and bootloader as well. But then you would have a clean tablet that you can unlock again, and install your favourite ROM.
Click to expand...
Click to collapse
Its headed for stock and staying that way. I need it for work and all the custom roms either do not support the A501's Cell Data. or restart all the time. saddly I will just have to stick with a root and debloat
Timelord83 said:
Its headed for stock and staying that way. I need it for work and all the custom roms either do not support the A501's Cell Data. or restart all the time. saddly I will just have to stick with a root and debloat
Click to expand...
Click to collapse
Try to take a look at Tegraowners.com, it seems that they have a working ROM for A501, give it a chance..
rickdtweet said:
Try to take a look at Tegraowners.com, it seems that they have a working ROM for A501, give it a chance..
Click to expand...
Click to collapse
Gave it a try, it no longer randomly restarts but suffers from Sleep Of Death. So again I have a useless tablet. back to stock it goes and most likely for sale as i need newer versions of STABLE android. a device that i have keep awake 8 hours a day for fear it will not wake up is useless and no one is offering any ideas on the tegraowners
Hello,
I have a problem with my OP2. And I hope you might be able to help me with it. The main problem is that I am not able to get fingerprint and camera + flashlight wirking at the same time, at any ROM. I have tried a lot of different ROMs but non of the seem to work. In all the cases it is either the fingerprint that works, or the camera + flashlight. I didn't have this problem before the brick.
All of the problems started when I my phone got bricked. I used a recovery tool (Qualcomm) in order to get it working again( with TWRP recovery). But when I installed OOS 2.2.1, only the camera and flashlight work.
But when I install OOS 3.0.x, and afterwards CM 13, the fingerprint works, but not the camera and flashlight. I have tried everything I can think of at this moment. For example I have tried to changed the kernel. I have installed the recoveries and ROMs in different orders. But at the moment I have no idea how I can get it working properly again.
I hope you are able to help me out,
Rhardof
i think you should restart your device
What Rly? Restart the device?
Anyway why dont you use the stock images that are posted here and flash then over fastboot the komplett device every Single Image?
oediv said:
What Rly? Restart the device?
Anyway why dont you use the stock images that are posted here and flash then over fastboot the komplett device every Single Image?
Click to expand...
Click to collapse
Oke I'll try that. But where exactly can I find these stock images? And should I replace all of them or should I just replace a couple?
Thanks a lot already!
Please do a full recorvery, in this forum is a guide how to reverse the while phone and do a fu recorvery. This will wile everything including your custom recorvery mode and root
Seimus said:
Please do a full recorvery, in this forum is a guide how to reverse the while phone and do a fu recorvery. This will wile everything including your custom recorvery mode and root
Click to expand...
Click to collapse
Could you send a link of the full recovery forum. I am not quit able to find it...
Search option is smart
Rhardof said:
Could you send a link of the full recovery forum. I am not quit able to find it...
Click to expand...
Click to collapse
Dude, just If you check the topic in this section its reposted here at least 7 times. The searching option is pretty easy to use.
HOwever follow up the link bellow, step by step, cause this works 100% So if it will not work you well then you are doing something wrong
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Seimus said:
Dude, just If you check the topic in this section its reposted here at least 7 times. The searching option is pretty easy to use.
HOwever follow up the link bellow, step by step, cause this works 100% So if it will not work you well then you are doing something wrong
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Click to expand...
Click to collapse
Yeah I know, and I have searched for it, but I just wanted to make sure I had the right one. But thanks a lot anyways, I will follow the guide somewhere this week.
Will keep you updated and thanks for the effort!
Rhardof
Rhardof said:
Yeah I know, and I have searched for it, but I just wanted to make sure I had the right one. But thanks a lot anyways, I will follow the guide somewhere this week.
Will keep you updated and thanks for the effort!
Rhardof
Click to expand...
Click to collapse
I wish you luck, the guide is really easy to go on. And it works, I bricked my phone several times and it always helped.
Regards,
Seim
So, I had a day 1 v20 that began randomly rebooting back in december. Thought it was a hardware issue and finally got around to replacing it the other day. Now, after getting the replacement v20 set up on a custom rom (AICP) I'm seeing random reboots again. I've tried every single custom rom available for the h918 and they all experience reboots. When i've asked about the issue in the threads it seems as if I'm the only one. It appears to be a custom-rom only problem that apparently no one else is experiencing? The kernel panics are being caused by the modem, and it started happening when I upgraded to the 10j base. This replacement also came with 10j. Am I just super unlucky with two duds or is there really something going on here?
TLDR; Anyone else with a h918 with 10j bootloader/modem running custom roms and seeing random reboots?
What kernel do you use? If you use Konverged, it seems to give random reboots after a while of use. I noticed that right away though.
Biff627 said:
What kernel do you use? If you use Konverged, it seems to give random reboots after a while of use. I noticed that right away though.
Click to expand...
Click to collapse
Have always left kernel stock.
Are you making sure that you are wiping data when flashing a rom? Clean install should help. What other things do you use? When does it crash? Maybe a root app is causing this???
Biff627 said:
Are you making sure that you are wiping data when flashing a rom? Clean install should help. What other things do you use? When does it crash? Maybe a root app is causing this???
Click to expand...
Click to collapse
This is a fresh replacement device with a clean rom install. There was no data to wipe. Happens even without any apps installed and it's completely random and cannot be reproduced. The only thing I know is the modem is causing the kernel panics.
trobertson said:
This is a fresh replacement device with a clean rom install. There was no data to wipe. Happens even without any apps installed and it's completely random and cannot be reproduced. The only thing I know is the modem is causing the kernel panics.
Click to expand...
Click to collapse
Welll would this help at all? https://www.androidfilehost.com/?fid=673368273298927322 Its the modem and radio for H918? Not sure if this could help at all. I have a VS995 device. And I havent seen anyone else with this issue. If you do flash this... Backup yours first.
Biff627 said:
Welll would this help at all? https://www.androidfilehost.com/?fid=673368273298927322 Its the modem and radio for H918? Not sure if this could help at all. I have a VS995 device. And I havent seen anyone else with this issue. If you do flash this... Backup yours first.
Click to expand...
Click to collapse
The phone came with stock 10j.. flashing this wouldn't change anything.
trobertson said:
The phone came with stock 10j.. flashing this wouldn't change anything.
Click to expand...
Click to collapse
Does the KDZ have 10j included? If not maybe try that to downgrade and reroot from there
Biff627 said:
Does the KDZ have 10j included? If not maybe try that to downgrade and reroot from there
Click to expand...
Click to collapse
There is a 10i kdz that I can try.. the kdz's are full stock flash files. Bootloader modem system efs etc
trobertson said:
There is a 10i kdz that I can try.. the kdz's are full stock flash files. Bootloader modem system efs etc
Click to expand...
Click to collapse
Im just wondering if for some reason the 10J is messing with it somehow. What rom are you using and what other roms have you used in the past that give you this issue?
Biff627 said:
Im just wondering if for some reason the 10J is messing with it somehow. What rom are you using and what other roms have you used in the past that give you this issue?
Click to expand...
Click to collapse
Aicp, rr, cm-remix, stock Lineage.
trobertson said:
Aicp, rr, cm-remix, stock Lineage.
Click to expand...
Click to collapse
So things that already have issues :silly:
All jokes aside. I would recommend trying Weta to see if that helps. Very stable rom
Biff627 said:
So things that already have issues :silly:
All jokes aside. I would recommend trying Weta to see if that helps. Very stable rom
Click to expand...
Click to collapse
The entire point here is that I don't want to run stock or anything based on stock. I would simply chalk it up to the Lineage base but since I'm one of a serious minority having this problem I'm led to believe it's something simpler that can be fixed. Possibly related to 10j as most custom ROM users are still running 10d firmware
trobertson said:
The entire point here is that I don't want to run stock or anything based on stock. I would simply chalk it up to the Lineage base but since I'm one of a serious minority having this problem I'm led to believe it's something simpler that can be fixed. Possibly related to 10j
Click to expand...
Click to collapse
Anything not based on stock will give you issues. One reason why I like stock based roms is because the second screen will actually work... I would atleast test a stock based rom to see how it goes. If it works and doesnt crash, Then something is wrong with the rom or your could be flashing it wrong :/ Idk, just an idea to test. Non stock roms will Always give you issues. Always
If you still have issues on a stock based rom, then I would downgrade with the kdz and try again. Its probably crashing since the modem is 10j and the rom isnt really fit for that.
Biff627 said:
Anything not based on stock will give you issues. One reason why I like stock based roms is because the second screen will actually work... I would atleast test a stock based rom to see how it goes. If it works and doesnt crash, Then something is wrong with the rom or your could be flashing it wrong :/ Idk, just an idea to test. Non stock roms will Always give you issues. Always
If you still have issues on a stock based rom, then I would downgrade with the kdz and try again. Its probably crashing since the modem is 10j and the rom isnt really fit for that.
Click to expand...
Click to collapse
I never used the second screen, it's more of a nuisance for me. Everything it did can be replaced by gestures and lockscreen settings on custom. Only thing I miss is notifications but that's why we have ambient display.
I might try downgrading to the 10i firmware to see what happens. Unfortunately there are no 10d flashables. Otherwise this ROM is flawless.
trobertson said:
I never used the second screen, it's more of a nuisance for me. Everything it did can be replaced by gestures and lockscreen settings on custom. Only thing I miss is notifications but that's why we have ambient display.
I might try downgrading to the 10i firmware to see what happens. Unfortunately there are no 10d flashables. Otherwise this ROM is flawless.
Click to expand...
Click to collapse
Not to shoot down your opinion, but why would you get it if the Second screen is a nuisance to you?? Im also pretty sure camera is screwed on custom roms.... I just dont have that appeal. Its better safe than sorry to check and see if a stock rom works fine than to downgrade and it still doesnt work :/ Idk thats my 2 cents
Biff627 said:
Not to shoot down your opinion, but why would you get it if the Second screen is a nuisance to you?? Im also pretty sure camera is screwed on custom roms.... I just dont have that appeal. Its better safe than sorry to check and see if a stock rom works fine than to downgrade and it still doesnt work :/ Idk thats my 2 cents
Click to expand...
Click to collapse
It was between this and the axon 7. I didn't want a fullHD screen so that eliminated a lot of the other options.
trobertson said:
It was between this and the axon 7. I didn't want a fullHD screen so that eliminated a lot of the other options.
Click to expand...
Click to collapse
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Biff627 said:
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Click to expand...
Click to collapse
Not a Samsung fan. Especially with KNOX. I buy phones first based on the chances of development producing workable custom ROMs and second based on hardware features.
Back to the main topic: I just managed to flash the 10i modem alone so we'll see what happens. I'm working on extracting the 10d modem as well.
Biff627 said:
Note 7 chaos force you to this phone as well? I prefer the second screen tbh. I haven't touched a custom rom since my note 2 and I had issues with them then. But hey, if it ends up working then more power to ya
Click to expand...
Click to collapse
UPDATE: Flashing the 10i modem made no difference, still having random reboots (although they seem less frequent), I will try the 10d modem once I find a way to extract it from the TOT files posted on this forum.
Hello,
I today went to install an update to the RR 8.1 ROM, however my G6 will no longer boot past TWRP - and I have no idea why.
I've formatted everything possible.. have tried to flash different ROMs and Kernels but the device simply will not boot correctly. It boots into Recovery every time and i'm confused as to why.
I'm currently out and about wont my mac so I can't flash a stock kdz until later when I get onto my Windows machine.
Is there anything I can do now?
TIA!
This is probably the 8th-9th thread about this issue. Please search. This is a common problem with linage based os OTA updates.
Research.
adaimespechip said:
Hello,
I today went to install an update to the RR 8.1 ROM, however my G6 will no longer boot past TWRP - and I have no idea why.
I've formatted everything possible.. have tried to flash different ROMs and Kernels but the device simply will not boot correctly. It boots into Recovery every time and i'm confused as to why.
I'm currently out and about wont my mac so I can't flash a stock kdz until later when I get onto my Windows machine.
Is there anything I can do now?
TIA!
Click to expand...
Click to collapse
You could try the solution posted Here
Good luck!
basicreece said:
This is probably the 8th-9th thread about this issue. Please search. This is a common problem with linage based os OTA updates.
Research.
Click to expand...
Click to collapse
Are you aware of how many random threads there are that relate to the G6 and the word 'recovery'? I didn't think of doing any research AT ALL. Thanks for your useful input.
Killua96 said:
You could try the solution posted Here
Good luck!
Click to expand...
Click to collapse
Thank you! I Didn't spot this, but unfortunately have returned to stock for now
adaimespechip said:
Are you aware of how many random threads there are that relate to the G6 and the word 'recovery'? I didn't think of doing any research AT ALL. Thanks for your useful input.
Thank you! I Didn't spot this, but unfortunately have returned to stock for now
Click to expand...
Click to collapse
You are very welcome, just next time please search before repeating yourself. So many other lazy ignorant people who cant be bothered to search or use their initiative that the forum gets filled up with the same rubbish.
If you need some help on how to use the search correctly let me know.