Related
Hello, i have htc hd2 and i already intallled this ROM:
http://forum.xda-developers.com/showthread.php?t=1209474
Now, i want to update this ROM to this one:
http://forum.xda-developers.com/showthread.php?t=1662881
But i dont know how, i have magldr installed on my device, 2.08 spl and the proper radio. I dont really know if i first have to uninstall the current android i have(i dont know how either) or if i just flash it on top of it. Another question i have is how to flash a rom that comes on a zip file from magldr. Because i installed the android that i currently have with an .exe that came inside the rom i downloaded.
Thanks, i hope i can get this solved asap.
You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.
Also, if you installed your first rom using daf.exe some time ago there's a good chance you don't have magldr 1.13.
You can tell by looking at the magldr menu screen at the top, or by looking at option 8,, if option 8 ISN'T "ad recovery" then you need to upgrade magldr. (Well, technically you don't, but its way easier if you do)
Marvlesz said:
You don't need to uninstall your current ROM, but you have to install CWM first with the correct partition size. After that, boot into cwm by selecting option "8. AD Recovery" and then "install zip from sdcard" and choose the ROM you downloaded as a .zip .. and you should be good to go.
If you need elaboration, you can follow this tut: http://forum.xda-developers.com/showpost.php?p=16528026&postcount=7
Keep in mind you have to modify "Step 8" & "Step 10" according to your ROM.
Click to expand...
Click to collapse
I installed my previous rom with daf.exe. I have to install CWM now, i have magdlr 1.13, so i can do it. But i read this:
"WARNING MESSAGES:
GOING FROM A DAF FLASHED ROM TO A RECOVERY FLASHED ROM WILL WIPE ALL DATA
IF YOU FLASH ANOTHER ROM USING DAF, RECOVERY WILL NO LONGER WORK CORRECTLY, YOU WILL NEED TO REFLASH RECOVERY"
I didnt understand what it meant with "wipe all data". Is there any chance to brake my device?
Thanks
It just means that the apps and data on your current ROM will be deleted (SD card will not be affected). You can use an app like Titanium Backup to backup your apps and app data then restore them after flashing a new ROM.
I already flashed the rom succesfully, thanks for the help
flashed but reboot failed
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
bocacapo123 said:
I already flashed the rom succesfully, thanks for the help
Click to expand...
Click to collapse
keep_touch said:
Flash was successfull, but first reboot failed. Phone shows the cyanoGen mod figure with an arrow turning around it for ages.
Any ideas how to make it working?
Click to expand...
Click to collapse
Make sure you setup your partition perfectly as the OP said for your ROM,if u new on this just grabed HD2 Toolkit,try to start all over again.
but if you have settle up your partition perfectly try to go to recovery wipe cache,than wipe dalvik cache and reboot,see if this working,good luck
Long Live HD2,Long Live Rock'n Roll!!
I'm trying to install Omega v20.1 (coming from v13) on my galaxy S4 I9505
These are the steps i followed:
1. Backuped phone (nadroid backup + titanium)
2. Flashed the new bootloder and modems with odin v1.85 -> I9505XXUFNA1_Bootloader_Modems.tar (PDA slot)
No auto reboot, waited 3 minutes after odin was done before reboot
3. Booted to Recovery (TWRP newest version) and flashed Omega v20.1 and then restarted phone.
The spinning logo apperas at boot and stays spinning for 15+ minutes (stuck at boot)
Any ideas on what went wrong? And how to make it work? According to all threads I've read this is a school book example on how to do it.
Plz, anyone? (nand restore and v13 is back with a 0x1 know but that was expected)
/Jörgen
spiffzilla said:
I'm trying to install Omega v20.1 (coming from v13) on my galaxy S4 I9505
These are the steps i followed:
1. Backuped phone (nadroid backup + titanium)
2. Flashed the new bootloder and modems with odin v1.85 -> I9505XXUFNA1_Bootloader_Modems.tar (PDA slot)
No auto reboot, waited 3 minutes after odin was done before reboot
3. Booted to Recovery (TWRP newest version) and flashed Omega v20.1 and then restarted phone.
The spinning logo apperas at boot and stays spinning for 15+ minutes (stuck at boot)
Any ideas on what went wrong? And how to make it work? According to all threads I've read this is a school book example on how to do it.
Plz, anyone? (nand restore and v13 is back with a 0x1 know but that was expected)
/Jörgen
Click to expand...
Click to collapse
Did you even fullwipe before flashing the Omega
Repulsa said:
Did you even fullwipe before flashing the Omega
Click to expand...
Click to collapse
Sorry, forgot to mention it . I did a full wipe in recovery and during Omega installation
/Jörgen
spiffzilla said:
Sorry, forgot to mention it . I did a full wipe in recovery and during Omega installation
/Jörgen
Click to expand...
Click to collapse
then try this way mate
Wipe current ROM
Installed STOCK LEAKED NA1 (made sure wifi etc was working after flash)
Installed/flashed latest TWRP
Flashed Omega 20.x with full wipe
Set up phone etc (again making sure wifi and everything else was OK
Optional = And for good measure then performed a no-wipe install!
I'll give it a try, thanks.
Will reply in thread and let you (and anyone else interested) know
/Jörgen
1. Full wipe
2. Install I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_OXA.zip via TWRP
3, Error flashing zip '/external_sd/I9505XXUFNA1...........
Fail
Will try a re-download tomorrow
/Jörgen
spiffzilla said:
1. Full wipe
2. Install I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_OXA.zip via TWRP
3, Error flashing zip '/external_sd/I9505XXUFNA1...........
Fail
Will try a re-download tomorrow
/Jörgen
Click to expand...
Click to collapse
Hehe funny mate You need to Extract the file and I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_OXA.zip, Then you get a file called I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME_OXA..tar.md 5 and flash it with odin by selecting PDA/AP , then follow the tutorial on top , Or follow this
Remember Flashing this or Omega will void your warranty.
Extract (unzip) the firmware file
- Download Odin3 v3.09
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add - Add I9505XXUFNA1_I9505OXAFNA1_I9505XXUFNA1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Next step after your done flashing Stock
Again via odin pc flash the latest recovery TWRP or philz recovery Im not really sure about TWRP if they have .tar to flash ....
Wipe cache, dalvik cache data and system (Clean wipe!)
From recovery flash Omega 20.x with full wipe
Set up phone etc (again making sure wifi and everything else was OK)
Optional = And for good measure then performed a no-wipe install! Done!
LoL
That made me feel silly, thanks for straightening me up. Will try the right way
/jörgen
Sent from my GT-I9505 using xda app-developers app
spiffzilla said:
LoL
That made me feel silly, thanks for straightening me up. Will try the right way
/jörgen
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Hehe be aware that if you flash the NA5 Omega v22 or something on next release you Can't downgrade to official 4.3 after last NA5 leak ..
Repulsa said:
Hehe be aware that if you flash the NA5 Omega v22 or something on next release you Can't downgrade to official 4.3 after last NA5 leak ..
Click to expand...
Click to collapse
Thats ok
I tried what you said and everything worked as promised! Great
Thanks for your help I now run 4.4.2 with the newest Omega
/Jörgen
Btw. Iäve pressed your thank you button
spiffzilla said:
Thats ok
I tried what you said and everything worked as promised! Great
Thanks for your help I now run 4.4.2 with the newest Omega
/Jörgen
Btw. Iäve pressed your thank you button
Click to expand...
Click to collapse
Glad that help's If you have any problem in a future feel free to ask. have a nice day
Well, I know there are lot of helpful guides out there on how to install cyanogenmod but not everybody gets what he's looking for. I recently searched a lot of sites, forums, and lot of xda posts for installing cyanogenmod 11 M7. And i finally found few posts that helped me.
With these posts one can get an idea about how to flash a kernel, how to back up the data, and how to flash a custom ROM on a S2. Pretty helpful...isn't it? All thanks to these guys - @avirk , @-Grift- @banjara @Vivek_Neel @Phil3759 .
The steps might fit correct for some.. where there might be some variations for others. I myself didn't find some steps from the guide i followed while backing up my data. But still.. i went for it. And it was good enuf.
So here are the steps that i followed... n i think which might help some one like me out there.
First of all. as they say.. If anything goes wrong. I'm not responsible. If everything goes right.. well..Thank you then.
1) Downloads required
- << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
- CWM 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery
- cm-11-20140609-SNAPSHOT-M7-i9100.zip
- Gapps
2) Copy << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> into external storage.
3) Boot into stock recovery (volume up+home+power)
4) Select "apply update from external storage".
5) Now select the << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> file you copied in previous step
--- Rooted! ---
6) Reboot into recovery select option “Backup and Restore”
7) Select the option “Advance Backup and Restore”
8) Select the “Custom Backup Job”. There you have tick the “Preload” folder
9) scroll down and “Start custom Backup job” And then it will ask where you want to store the backup on you “Internal/External Storage”
10) After selecting the storage path it will start the backup process. When it finished you are ready to install the new ROM.
- One thing to be noted. I did not find the ‘Advanced backup and restore’ option while I was doing it. So I just took the normal back up. For a complete guide on backup refer to THIS POST
11) Boot into recovery (Do not boot into OS)
12) Select "apply update from external storage".
13) Now select the 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery file that was copied on your external storage
14) CWM 6.0.4.7 now installed.
15) Boot into recovery (Do not boot into OS)
16) Wipe data/factory reset
17) Wipe cache
18) Wipe dalvik cache from advanced menu.
19) Select "apply update from external storage".
20) cm-11-20140609-SNAPSHOT-M7-i9100.zip
21) It will get installed.
22) Go back to recovery and Select "apply update from external storage".
23) Select the Gapps .zip file.
24) Reboot to OS.
And you're done!
Where are /format system and /format preload??? If you are on 4.1.2 stock you need to do a full wipe.
Flash latest philz kernel in stock recovery, then reboot into recovery again(hold 3 buttons) and flash latest Philz CWM Touch recovery(6.0.4.8!). Then do a full wipe and flash a custom rom and gapps.
Послато са GT-I9100 уз помоћ Тапатока
Zile995 said:
Where are /format system and /format preload??? If you are on 4.1.2 stock you need to do a full wipe.
Flash latest philz kernel in stock recovery, then reboot into recovery again(hold 3 buttons) and flash latest Philz CWM Touch recovery(6.0.4.8!). Then do a full wipe and flash a custom rom and gapps.
Послато са GT-I9100 уз помоћ Тапатока
Click to expand...
Click to collapse
Well.. i did factory, cache and dalvik.. :\ and till now everything's fine..
But you might be correct. I used the guide that has steps for backup and all...
SubraiSambary said:
But you might be correct. I used the guide that has steps for backup and all...
Click to expand...
Click to collapse
Please use the rom nuke script it is better. It will clean your phone and prepare for new rom. Then everyting will work fine.
Послато са GT-I9100 уз помоћ Тапатока
Zile995 said:
Please use the rom nuke script it is better. It will clean your phone and prepare for new rom. Then everyting will work fine.
Послато са GT-I9100 уз помоћ Тапатока
Click to expand...
Click to collapse
That sounds nice.. can you provide the link?
nice guide @SubraiSambary , keep up the good work
shriom_manerker said:
nice guide @SubraiSambary , keep up the good work
Click to expand...
Click to collapse
Thanks buddy
SubraiSambary said:
Well.. i did factory, cache and dalvik.. :\ and till now everything's fine..
But you might be correct. I used the guide that has steps for backup and all...
Click to expand...
Click to collapse
I Agree with Zile.
I installed Cyano with similar steps and I finished with an useless phone with system partition full.
format system and preload are mandatory moving from stock to cyano in my opinion.
FandangoL said:
I Agree with Zile.
I installed Cyano with similar steps and I finished with an useless phone with system partition full.
format system and preload are mandatory moving from stock to cyano in my opinion.
Click to expand...
Click to collapse
What happened with me was.. i didn't find the preload thing while making my backup.
So i missed some steps from the guide which i followed. I'll be trying it again when cm11 m8 will be out.
May be that time i can find the preload section.
SubraiSambary said:
Well, I know there are lot of helpful guides out there on how to install cyanogenmod but not everybody gets what he's looking for. I recently searched a lot of sites, forums, and lot of xda posts for installing cyanogenmod 11 M7. And i finally found few posts that helped me.
With these posts one can get an idea about how to flash a kernel, how to back up the data, and how to flash a custom ROM on a S2. Pretty helpful...isn't it? All thanks to these guys - @avirk , @-Grift- @banjara @Vivek_Neel @Phil3759 .
The steps might fit correct for some.. where there might be some variations for others. I myself didn't find some steps from the guide i followed while backing up my data. But still.. i went for it. And it was good enuf.
So here are the steps that i followed... n i think which might help some one like me out there.
First of all. as they say.. If anything goes wrong. I'm not responsible. If everything goes right.. well..Thank you then.
1) Downloads required
- << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
- CWM 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery
- cm-11-20140609-SNAPSHOT-M7-i9100.zip
- Gapps
2) Copy << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> into external storage.
3) Boot into stock recovery (volume up+home+power)
4) Select "apply update from external storage".
5) Now select the << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >> file you copied in previous step
--- Rooted! ---
6) Reboot into recovery select option “Backup and Restore”
7) Select the option “Advance Backup and Restore”
8) Select the “Custom Backup Job”. There you have tick the “Preload” folder
9) scroll down and “Start custom Backup job” And then it will ask where you want to store the backup on you “Internal/External Storage”
10) After selecting the storage path it will start the backup process. When it finished you are ready to install the new ROM.
- One thing to be noted. I did not find the ‘Advanced backup and restore’ option while I was doing it. So I just took the normal back up. For a complete guide on backup refer to THIS POST
11) Boot into recovery (Do not boot into OS)
12) Select "apply update from external storage".
13) Now select the 6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST) recovery file that was copied on your external storage
14) CWM 6.0.4.7 now installed.
15) Boot into recovery (Do not boot into OS)
16) Wipe data/factory reset
17) Wipe cache
18) Wipe dalvik cache from advanced menu.
19) Select "apply update from external storage".
20) cm-11-20140609-SNAPSHOT-M7-i9100.zip
21) It will get installed.
22) Go back to recovery and Select "apply update from external storage".
23) Select the Gapps .zip file.
24) Reboot to OS.
And you're done!
Click to expand...
Click to collapse
Where's the GApps.zip file? There's no link provided.
ranzzit said:
Where's the GApps.zip file? There's no link provided.
Click to expand...
Click to collapse
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
SubraiSambary said:
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
Click to expand...
Click to collapse
Thanks a ton mate You rock. Much appreciated.
ranzzit said:
Thanks a ton mate You rock. Much appreciated.
Click to expand...
Click to collapse
hehe. You're welcome buddy!
SubraiSambary said:
I left the choice to the readers.
Anyways... You can find gapps in the following threads :
http://forum.xda-developers.com/gal...wip-cyanogenmod-11-unnofficial-build-t2523604
http://forum.xda-developers.com/google-nexus-5/themes-apps/standard-minimal-gapps-t2012857
http://forum.xda-developers.com/showthread.php?t=2397942
http://forum.xda-developers.com/showthread.php?t=2530929
And you might find some links on google search too.
Just be sure you download the gapps for Kitkat 4.4.x. This will avoid problems
Go ahead and take your pick
Click to expand...
Click to collapse
You can link your above post for the link to the GApps section in the OP, then you'll not get other questions as to the link for GApps.... Also, as said by @Zile995, it is better if you include formatting system and preload too in your guide as not doing so may cause issues and doing so is the best way to full wipe your system for fresh flashing without issues...
And yes...Great work.... :good:
hi
i did every step of your procedures (more times) and the result is the same!!
when the phone starts all the google processes crash and it is impossible to do anything...
If I install the Cyano 10.1 everything is fine...
What can I do????
Any tried this on SHW-M250K model? Is it even compatible?
Sent from my iPhone using Tapatalk
Can I boot into system after installing 03.06.2013 - PhilZ-cwm6 v5.06.1 and later install new rom?
Would any of you guys be able to help me (a rookie when it comes to this) with these Q's in my thread about CyanogenMod?
This thread: http://forum.xda-developers.com/galaxy-s2/help/stock-rom-to-cyanogenmod-import-sms-t2903491
Btw, isn't it easiest to acquire CyanogenMod by using the CyanogenMod Installler for the i9100?
http://beta.download.cyanogenmod.org/install
Bizius said:
hi
i did every step of your procedures (more times) and the result is the same!!
when the phone starts all the google processes crash and it is impossible to do anything...
If I install the Cyano 10.1 everything is fine...
What can I do????
Click to expand...
Click to collapse
Never had this problem bud. I installed M9 in the same way but google process failures were never encountered.
I'm afraid i might not be of any use here but would suggest one thing that stick to 10.1 till u find an answer to this.
And regarding your problem..... These guys( @avirk , @banjara , @-Grift- , @Vivek_Neel , @Phil3759 ) might be able to help you out. They helped me too.
bums85 said:
Can I boot into system after installing 03.06.2013 - PhilZ-cwm6 v5.06.1 and later install new rom?
Click to expand...
Click to collapse
I guess it should be ok to boot into the system because you'd be installing the recovery and if the recovery is compatible with the ROM and won't give any problem then you can. But still.. always take a second opinion before you try because... even I'm a learner.
I have a Samsung Galaxy Tab 4 8.0 SM-T330NU KitKat 4.4.2
Sister borrowed by tablet on a study abroad trip and took it upon herself to root it. it was rooted successfully using Odin 3.10.6. she then installed TitaniumBackup Pro and started to uninstall things. in an effort to rid the tablet of bloatware, she probably deleted something important. When booted, tablet will stick on Samsung screen. So i factory reset. this goes smoothly, but right after the initial setup, i can see the notification bar if there is a notification present and can access the multi window thing at the bottom but no home screen. I also get an error saying "Unfortunately, Samsung Knox has stopped". When i am in settings or anything else and press the home key the screen just goes black. almost as thought everything else it there, its just missing the home screen. I flashed 2 different stock ROMs, and 1 pre-rooted ROM with Odin, and factory reset after and the same thing happens.
First try a factory reset in recovery not rom
in philz goto > wipe and format options > Factory reset and reboot
if no go then
Try formatting data,
adb pull all you important stuff off of tab first
then
in philz recovery goto > wipe and format options > wipe user media
twrp has a similar functions but i don't know where they are
then reflash an official release
m
moonbutt74 said:
First try a factory reset in recovery not rom
in philz goto > wipe and format options > Factory reset and reboot
if no go then
Try formatting data,
adb pull all you important stuff off of tab first
then
in philz recovery goto > wipe and format options > wipe user media
twrp has a similar functions but i don't know where they are
then reflash an official release
m
Click to expand...
Click to collapse
cannot operate the tablet to install philz
(Wasnt really clear on m y first reply, sorry.)
also, on attempt of flashing just downloaded stock ROM, Odin is telling me to get a PIT file, which are very specific to the device, but i cant seem to find one for the SM-330NU. Delete cache and factory reset done before i even tried flashing. Same result. the data is gone and ive made peach with that. I just want it to work at this point. as i cannot access the home screen, cannot install philz.
[email protected] said:
cannot operate the tablet to install philz
Click to expand...
Click to collapse
??
ok obviously I am confused about something. Could you elaborate on what you mean by using philz do those things? ive no idea what philz means.
[email protected] said:
ok obviously I am confused about something. Could you elaborate on what you mean by using philz do those things? ive no idea what philz means.
Click to expand...
Click to collapse
Philz is a touch version of Clockworkmod recovery (a custom recovery); you can install the tar file with Odin with the tablet in download mode. Alternatively you can use TWRP (a different custom recovery) instead of Philz, whichever you prefer
I went to the TWRP developer site and could not find a version for my model. Found your post of Philz downloads and got 6_58_9 final recovery and flashed it. flash said successful in Odin, but when i tried to reboot into recovery mode i see the "Recovery Mode: in the upper left corner for a split second, then it automatically jumps into download mode and says "Could not do normal boot" right above where it says Odin Mode.
[email protected] said:
I went to the TWRP developer site and could not find a version for my model. Found your post of Philz downloads and got 6_58_9 final recovery and flashed it. flash said successful in Odin, but when i tried to reboot into recovery mode i see the "Recovery Mode: in the upper left corner for a split second, then it automatically jumps into download mode and says "Could not do normal boot" right above where it says Odin Mode.
Click to expand...
Click to collapse
TWRP here
sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar.md5
https://www.androidfilehost.com/?fid=95887005526787722
rename sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar.md5
to sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar
flash in odin with auto-restart UNCHECKED, when flash completes [res-ok] manually reboot to recovery
moonbutt74 said:
sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar.md5
https://www.androidfilehost.com/?fid=95887005526787722
rename sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar.md5
to sm-t330nu-Philz-6_58_9-recovery-milletwifiue.tar
flash in odin with auto-restart UNCHECKED, when flash completes [res-ok] manually reboot to recovery
Click to expand...
Click to collapse
"md5 error. Binary is invalid"
We have a winner! Thank you so much for the links. You saves my sister's life. Literally. I appriciate your time.
Edit: sorry didn't see that last post
The TWRP links posted by user badusenamechoice seemed to have worked. I truly appreciate your time and energy helping me out. I am a computer nerd from waaaay back, but I'm still learning the world of Android modding. So, thank you for you patience in explaining things to me. Even if it hadn't been fixed, its nice to know theres a forum out there with knowledgeable folks, should I eff it up myself. You are a gentleman and a scholar, sir.
Friends, I am new to custom roms. It is the first time I will be installing a custom rom. I have note 3 n9005 32GB. It is rooted and TWRP recovery installed. I am looking for some simple to install custom rom. Please guide me in this regard. A simple and less risky installation method would be good for me.
http://forum.xda-developers.com/galaxy-note-3/development
Suggest Phronsis rom .
But if you don't understand read the FAQS and instructions .
waqar bukhari said:
Friends, I am new to custom roms. It is the first time I will be installing a custom rom. I have note 3 n9005 32GB. It is rooted and TWRP recovery installed. I am looking for some simple to install custom rom. Please guide me in this regard. A simple and less risky installation method would be good for me.
Click to expand...
Click to collapse
Try bobcat rom friend. Worked great for me. Go to galaxynote3root.com for more info on the best roms
JJEgan said:
http://forum.xda-developers.com/galaxy-note-3/development
Suggest Phronsis rom .
But if you don't understand read the FAQS and instructions .
Click to expand...
Click to collapse
Thanks. I have downloaded this rom. Let's see what happens. In case if I get a boot loop, can I reflash stock rom using odin? Just to be on safe side...
Yes, you can flash back to a stock Samsung ROM using Odin. I recommend downloading the stock ROM and keep it on your computer so you can flash back to stock when required.
waqar bukhari said:
Thanks. I have downloaded this rom. Let's see what happens. In case if I get a boot loop, can I reflash stock rom using odin? Just to be on safe side...
Click to expand...
Click to collapse
The OP has instructions and Q&A page for problems .
Long time to boot try a factory reset.
JJEgan said:
The OP has instructions and Q&A page for problems .
Long time to boot try a factory reset.
Click to expand...
Click to collapse
Well I tried to use that rom but I had some problem with that due to which I got to reflash stock firmware. Whenever I tried to install rom using TWRP my phone rebooted and get stuck on note 3 logo.
Friends, I was unable to install Phronesis rom. The steps that I followed are given below.
1) Downloaded Phronesis v6.2 rom from OP and copied it to SD Card.
2) Booted into TWRP recovery.
3) Selected "Wipe" option in the recovery menu.
4) Selected Advanced wipe.
5) From this menu I selected system, data, cache and delvit/art cache.
6) After selecting above options I swiped to wipe.
7) After this I went back to main recovery Menu.
8) From recovery menu I selected Install.
9) From here I chose Phronesis v6.2 rom from SD card storage.
10) Installation started and a bar started to load on the bottom of screen.
And after a few seconds (10 to 30 sec) my phone restated and stuck on note 3 logo.
At the end I didn't have any option but to re-flash stock firmware using odin.
It is the horror story of my note 3.
Please tell me where I have done wrong.
http://forum.xda-developers.com/gal...om-phronesis-rom-v1-0-stable-feature-t3241910
http://forum.xda-developers.com/showpost.php?p=65358180&postcount=10000
1. Boot into recovery (say TWRP) Please read Q&A re TWRP .
2. Select wipe in recovery menu
3. Select Advanced Wipe
4. From the resulting window, select to wipe system, data, cache and dalvik cache (of course after backing up your rom / data)
5. Swipe to wipe the selected partitions.
That's recovery wipe completed.
Recovery install zip .
In Aroma menu when you get to option to wipe, select:
1. Select "Full Wipe" radio button
2. Select "Full wipe 1" radio button
3. Select your CSC as desired
4. Continue making other choices as you like....
Sir i am trying to follow this guide given in OP in Phronesis Rom thread. I successfully followed this guide till recovery wipe. But unfortunately it is not going into aroma installer.?
Then its a failed download of the rom .
Install zip should lead to a start of the rom install and aroma with options .
Suggest you stop posting multiple threads its to hard to follow .
JJEgan said:
Then its a failed download of the rom .
Install zip should lead to a start of the rom install and aroma with options .
Suggest you stop posting multiple threads its to hard to follow .
Click to expand...
Click to collapse
Thanks. And sorry for multiple threads. I will download that rom again.
Should I put rom file in internal memory of note 3 or I should put it in SD card?
SD Card .
Tried by redownloading the rom but still I can not enter aroma installer.
What is MD5?
The lollipop that I am currently installing my note 3 is "N9005ZSUGOL1_N9005OZSGOL1_N9005ZSUGOL1_HOME.tar.md5" via odin.
Is there any other way to make my stock rom more significant without installing custom rom?
Upgrade is almost complete. I will root soon after completion.
After trying many times, I don't want to install this rom anymore. Thanks every one for help. XDA is really amazing.