Database Users

[ROM][2.3.5][Orange Romania]

Salut. Today I recieved 2.3.5 on my sgs2. Does somebody know what's new...comparing to the previous 2.3.3?
Correction...it's 2.3.5

Any improvements? Wifi?
Sent from my GT-I9100 using XDA App

can you tell me what version do you have?

and what was the original firmware version from what you received the update...because i forgot the original that i have previous instaled.
thanks

it KH1.
look here
http://forum.xda-developers.com/showthread.php?t=1113928

strange....it said...my software cannot be upgraded trough kies...and i just instaled the KH1. Do i need also the kernel from kh1 for a kies update?
EDIT: yes , the kernel is needed..just updated to official kj4
EDIT2: after update...i didn't like it much, and just restore my nadroid backup (vr3.0 KI4,syiah2.1.1)...unfortunately, my baseband remain I9100BVKJ4. Maybe with this baseband, the usb jig exploit will not work anymore ...i will test it tomorrow at work

It's version KJ4.
the update came via kies.
Sent from my GT-I9100 using XDA App

BVKJ4 is the latest. It's in the carrier firmware thread for those that prefer Odin.

hhhans1 said:
Maybe with this baseband, the usb jig exploit will not work anymore ...i will test it tomorrow at work
Click to expand...
Click to collapse
This update contains new bootloader so you'll need to flash the old bootloader to use jig, old one can be found on here i just can't remember where at the moment
Sent from my GT-I9100 using XDA App

seanicca said:
This update contains new bootloader so you'll need to flash the old bootloader to use jig, old one can be found on here i just can't remember where at the moment
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I allways have backups, and sbl collection..so this it will not be a problem.
But allways, when you start the phone with the new firmware, you have a feeling if is better or not...and i didn't have any of those with this BVKJ4

Hi, does it contain signal boost?

HI
I Have a Orange UK handset and i have just had the 2.3.5 Update via KIES
It is now gingerbread BVKJ4
Signal Boost is on my handset

Just wanna know which kernel i should use to root sg2 (BVKJ4)?

hardcore's works great for me.

Can someone upload / link the modem from this ROM?

Also got my 2.3.5 last night on O2 UK
Good times
Sent from my GT-I9100 using XDA App

mrjay said:
hardcore's works great for me.
Click to expand...
Click to collapse
I am not sure waht you mean - i am trying to root my hanset and want to get it right. Is there any way yoiu could send me a link to correct kernel?
Many thanks in advance

What i find strange is that i have an unbranded handset from CPW and no update received. I am not that fussed really...except for the fact that when i updated to 2.3.4 my wifi got screwed so i am hoping for a fix.
Sent from my GT-I9100 using XDA App

how do I / should I update?

hi I'm in Canada with a WiFi note 8010. I've been waiting what feels like forever for this jb update and not sure if there's a better way to update? is there some other way to update? or should I just wait?
also I haven't rooted with the exnyos root, should I do that before or after?

hanexs said:
hi I'm in Canada with a WiFi note 8010. I've been waiting what feels like forever for this jb update and not sure if there's a better way to update? is there some other way to update? or should I just wait?
also I haven't rooted with the exnyos root, should I do that before or after?
Click to expand...
Click to collapse
I updated to the german firmware using the odin method described in another thread and it worked great, didnt trip the counter or change the device status. Data and apps were intact. all and all I dont see any reason to not do it.
if you want the canadian release then you can simply install it over top the german one once it becomes available but I doubt that there will be much difference.

You might have to WIPE tho, since the German and Canadian ROMs have different CSCs.
Someone please confirm.

hanexs said:
hi I'm in Canada with a WiFi note 8010. I've been waiting what feels like forever for this jb update and not sure if there's a better way to update? is there some other way to update? or should I just wait?
also I haven't rooted with the exnyos root, should I do that before or after?
Click to expand...
Click to collapse
Using ROM's meant for other regions isn't an issue and a good way to get the lastest fixes and updated versions of s/w like S Note. The only reason folks in the U.S. had challenges was because they were using ROMs (N8010) not meant for their h/w (N8013). There's a N8010 4.1.2 ROM that just came out. You should be able to use it with no issues. When the Canadian JB ROM is released just install it (via Odin) over the German ROM and you'll be back to where you would have been anyway while being able to use JB in the mean time.
Here's the newest 4.1.2 N8010 JB ROM...
http://hotfile.com/dl/190513084/ece...GT-N8010-DBT-N8010XXUCMA5-1357980235.zip.html
Here's how to install it using Odin...
http://forum.xda-developers.com/showthread.php?t=2048213

Another thing Canadian users should be aware before updating is that, there is NO Official 4.0.4 Stock ROM to fall back to. So if you ever need to send the unit back to the shop (before a Canadian ROM arrives online), you're SOL.
This is on top of whatever issues flashing a ROM with a different CSC might cause.

I have the German rom on my Canadian note as far as I can tell there are absolutely 0 issues with having a different CSC. Although it's true that there is no official 4.04 I'm not very convinced that would be a problem in the event of a return I doubt any of the retailers in Canada would know enough to even check what firmware you have installed.
I can confirm that you do not have to wipe data your system status remains official.
Frankly I'm not even sure that installing an official rom would void the warranty even if it is from another region assuming of course you are installing an 8010 ROM on an 8010 device
Sent from my SGH-I747M using xda app-developers app
---------- Post added at 07:20 PM ---------- Previous post was at 07:17 PM ----------
klau1 said:
You might have to WIPE tho, since the German and Canadian ROMs have different CSCs.
Someone please confirm.
Click to expand...
Click to collapse
Nope you do not need to wipe. The csc doesn't matter as long as u use the rom for the German 8010
Sent from my SGH-I747M using xda app-developers app

Will you need to WIPE coming back from German to Canada?

klau1 said:
Will you need to WIPE coming back from German to Canada?
Click to expand...
Click to collapse
No. The only file that's being updated via Odin is the PDA/MD5 file which doesn't affect user settings, apps, or what's stored on the device. Occasionally you'll see a widget break or disappear off the home screen because it’s been superseded by one with newer functionality. That's the only casualty I've experienced in bouncing between ROMs from different regions. You'll also see regionally specific things pop-up. The Italian N8000 ROM had a pasta eating game pre-installed on it. Some things don't work because of regional exclusions like the EU Video Hub knows when it's being used on a non-EU device. Those you can just disable in Application Manager.

BarryH_GEG said:
When the Canadian JB ROM is released just install it (via Odin) over the German ROM and you'll be back to where you would have been anyway while being able to use JB in the mean time.
Click to expand...
Click to collapse
thanks for the post! I'm going to try this once my tablet has enough charge, will update you all with the results.
Although, what would happen if no official Canadian JB ROM is released in the future? Just like how there is no official ics rom.
Sent from my GT-N8010 using xda app-developers app

wow definitely impressed with the speed increase of jellybean. significantly faster. thanks for the help everyone!

D802 KitKat International rom Direct LG link

16gb
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW859395432109876543213/D80220B_00.kdz
32gb
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW465395432109876543213/D80220B_00.kdz
enjoy :good:
Many thanks!

mockneygeeza said:
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW645195432109876543213/D80220A_00.kdz
enjoy :good:
Many thanks!
Click to expand...
Click to collapse
That's not likely it. 80220B is the Open EUR one that's rolling out.... d802 International SIM Free
The B version (when flashed as a fully wiped recovery update) doesn't suffer from Audio crackling or BT wakelock issues - it's dated 6th March.

LenAsh said:
That's not likely it. 80220B is the Open EUR one that's rolling out.... d802 International SIM Free
The B version (when flashed as a fully wiped recovery update) doesn't suffer from Audio crackling or BT wakelock issues - it's dated 6th March.
Click to expand...
Click to collapse
OP edited links

Hello guys!
i want KitKat very badly for my LG G2, but i am worried about breaking my phone.
So can i flash this ROM into my phone, which is D80210A ?
Thanks in advance!

boombri said:
Hello guys!
i want KitKat very badly for my LG G2, but i am worried about breaking my phone.
So can i flash this ROM into my phone, which is D80210A ?
Thanks in advance!
Click to expand...
Click to collapse
I'm thinking The same, have a UK phone on T-Mobile I'm thinking I'll wait for official update.
Sent from my LG-D802 using xda app-developers app

treebill said:
I'm thinking The same, have a UK phone on T-Mobile I'm thinking I'll wait for official update.
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
+1 Same Here .... With d802 int. AME version ..

U can flash it, it won't have all the tmob bloatware
Sent from my LG-D802 using Tapatalk

New update 20F anyone?

It looks like a new 20F update is going to be released for D802.
This is the original article (Italian language, sorry), and the changelog is:
- introduced Knock Code™ feature;
- enhanged low light shots, reducing noise processing alghorithm;
- introduced recents Google security patches.

http://lg-phone-firmware.com/index.php?id_mod=36 ==> Ctrl+F ==> V20F ===> find it and download.
It isn't that hard to check if it has been already released or not.
I see a Baltics kdz and open 16gb version from Italy. and also branded Rogers one.
introduced recents Google security patches
Have they merged 4.4.4 updates?

reas0n said:
http://lg-phone-firmware.com/index.php?id_mod=36 ==> Ctrl+F ==> V20F ===> find it and download.
It isn't that hard to check if it has been already released or not.
I see a Baltics kdz and open 16gb version from Italy. and also branded Rogers one.
introduced recents Google security patches
Have they merged 4.4.4 updates?
Click to expand...
Click to collapse
Mirror
https://drive.google.com/file/d/0B_ESvfVtZzEwU2dFTnR3UGJsTW8/edit?usp=sharing

Which 20f version can i use on my g2 d802 open europe 32gb?
Gesendet von meinem LG-D802 mit Tapatalk

Schrotty35 said:
Which 20f version can i use on my g2 d802 open europe 32gb?
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
The one above should include 32GB version as LG unified the ROMs

I got the 20C before 3 days, I got the knock code
AND I can said that the tabs size in settings reduced
D802 16GB
The update size is 129.63 mb

It stills 4.4.2?
Sent from my Nexus 7 using XDA Free mobile app

MickyMax said:
It stills 4.4.2?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Yes

Anyone issues with 20f update
Hi there guys, does anyone has knock on issues with the new 20f update? As for me its seems not that responsive as it was on 20d. Sometimes i can only wake my phone up only with hw key. I wonder if someone experience the same?
Another issue i have noticed, after a phone call if i take the phone off my ear it just does stays black so i cant even end the call without unlocking it...

einoris said:
Hi there guys, does anyone has knock on issues with the new 20f update? As for me its seems not that responsive as it was on 20d. Sometimes i can only wake my phone up only with hw key. I wonder if someone experience the same?
Another issue i have noticed, after a phone call if i take the phone off my ear it just does stays black so i cant even end the call without unlocking it...
Click to expand...
Click to collapse
1. Open Phone
2. Type 3845#*802#
3. Go to Settings
4. Select Update Touch Firmware
Phone will be unresponsive for 5-10 seconds. Try knocking it off and back on.

robogo1982 said:
1. Open Phone
2. Type 3845#*802#
3. Go to Settings
4. Select Update Touch Firmware
Phone will be unresponsive for 5-10 seconds. Try knocking it off and back on.
Click to expand...
Click to collapse
Thanks for your reply but it remains the same. And its kinda strage that after I am taking phone of the ear after making a call it locks itself but my lockscreen settings has ling idle for locking the device.

Did you flash a stock KDZ, or? Did you try a sensor recalibration?

robogo1982 said:
Did you flash a stock KDZ, or? Did you try a sensor recalibration?
Click to expand...
Click to collapse
I am on stock rooted device, but i have found that 3rd party launcher causing it, went to Nova and its all gone now. Thanks for helping me.

Got it OTA in the Baltics. No issues so far.
Sent from my LG-D802 using XDA Free mobile app

Is this 20F upgrade equivalent to the 20D most of EU received earlier this year?

vPro97 said:
Is this 20F upgrade equivalent to the 20D most of EU received earlier this year?
Click to expand...
Click to collapse
Don't know if chagelog has changed but I had 20d and afterward I've got the 20f updates. My guess is that lg implemented security updates that google recently fixed like openSSL or something....

What about root/recovery?
Hey,
I've got the update as well but haven't updated yet, anyone knows if the current root/recovery methods work with the new version?
Don't want to lose my root :/
Thanks!

you can flash bruce v20f v4 stock rom for d802, it has root included (search in forum for download and instructions)...
prior flash - you can backup your apps with titanium (or preferred app) and restore them later (best to use usb otg stick for backups but you can backup on internal sd card as well since bruce's new rom flash doesn't require formatting sd card - only system, cache and data)
i've only lost my sms messages, but that's no biggie...
ps:
i have 16gb phone

Thanks!
Just got my G2 yesterday, Bruce's rom seems like a really nice option!

Yomach said:
Hey,
I've got the update as well but haven't updated yet, anyone knows if the current root/recovery methods work with the new version?
Don't want to lose my root :/
Thanks!
Click to expand...
Click to collapse
IOroot 25 works fine.

Issues on Lollipop Build LRX21V.N9005XXUGBOEA

Hi Everyone, I am having some annoying issues with my Lollipop since upgrading my note 3.
The build is Build LRX21V.N9005XXUGBOEA, Kernal version 3.4.0 -50200004 and base version N9005XXUUGBOD3
I have noticed the GPS is horrible. It often drops out and whilst using it, it drops out all the time and is always losing signal. I had to install a second app to help support the GPS so it works mostly no but not as well as it used too.
The wifi and 4G is a problem as well. It will often freeze and the whole phone becomes unresponsive and I have to take the battery out too reboot it.
Is there a more stable version I should be using please? I am getting tired of these ongoing issues, if I can't find a solution, I might just roll back too kitkat.

Other the GPS issue (it locks fine outside but I am still not happy that it sometimes won't lock inside) there are no problems on my phone at all. There is no 4G here, but H+ stays almost always, WiFi is absolutely rock solid too! Honestly I am really happy with this TouchWiz iteration. I was on OEA and I didn't have any issue as far as I can remember, but now I am on OF3, but as you can guess I wasn't having those issues you mentioned on OEA either, so I really don't know what to tell you mate.

ithehappy said:
Other the GPS issue (it locks fine outside but I am still not happy that it sometimes won't lock inside) there are no problems on my phone at all. There is no 4G here, but H+ stays almost always, WiFi is absolutely rock solid too! Honestly I am really happy with this TouchWiz iteration. I was on OEA and I didn't have any issue as far as I can remember, but now I am on OF3, but as you can guess I wasn't having those issues you mentioned on OEA either, so I really don't know what to tell you mate.
Click to expand...
Click to collapse
Thanks for getting back to me. I was hoping someone would be able to point me in the direction of a more solid version. I am running the first one that came out, so am thinking maybe a better version has been released that has fixes in place for these issues. Sorry I am not sure what OEA is or OF3

DevilsArc said:
Thanks for getting back to me. I was hoping someone would be able to point me in the direction of a more solid version. I am running the first one that came out, so am thinking maybe a better version has been released that has fixes in place for these issues. Sorry I am not sure what OEA is or OF3
Click to expand...
Click to collapse
OF3 is how we refer to firmware the last 3 digits but if I was you I would get very latest OG4 and update your modem to OF3 your firmware is a buggy release
Sent from my SM-G9250 using Tapatalk

DevilsArc said:
Hi Everyone, I am having some annoying issues with my Lollipop since upgrading my note 3.
The build is Build LRX21V.N9005XXUGBOEA, Kernal version 3.4.0 -50200004 and base version N9005XXUUGBOD3
I have noticed the GPS is horrible. It often drops out and whilst using it, it drops out all the time and is always losing signal. I had to install a second app to help support the GPS so it works mostly no but not as well as it used too.
The wifi and 4G is a problem as well. It will often freeze and the whole phone becomes unresponsive and I have to take the battery out too reboot it.
Is there a more stable version I should be using please? I am getting tired of these ongoing issues, if I can't find a solution, I might just roll back too kitkat.
Click to expand...
Click to collapse
I am having a worst issue on same Stock firmware.. Same baseband, same kernel.
All stock
My wifi and Bluetooth isn't turning on.. Please help.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app

Murshad007 said:
I am having a worst issue on same Stock firmware.. Same baseband, same kernel.
All stock
My wifi and Bluetooth isn't turning on.. Please help.
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Fully wipe the phone, then flash the firmware.

ithehappy said:
Fully wipe the phone, then flash the firmware.
Click to expand...
Click to collapse
Should I reflash same? It's KSA firmware, Or open Europe?
I am in Pakistan currently..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app

Murshad007 said:
Should I reflash same? It's KSA firmware, Or open Europe?
I am in Pakistan currently..
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app
Click to expand...
Click to collapse
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatalk

ithehappy said:
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hi,
I am on OG4 which I downloaded from Sammobile and I flashed it through Odin (checked only F. Time Reset & Auto Reboot). Everything else works fine but my Wifi does not turn on. Bluetooth & H+ (3G) are also working fine. Can you please tell me whether I need to update modem? I was rooted previously & Knox is at 0x1. Can you share the link for flashing the modem if it's required? Or any other solution please.

OG4
Quote:
Originally Posted by ithehappy
Doesn't matter where you are mate. Just get either OF3 or OG4 from sammobile, whichever has more build number and flash it. Update your modem too.
Sent from my SM-N9005 using Tapatal
Redmax! said:
Hi,
I am on OG4 which I downloaded from Sammobile and I flashed it through Odin (checked only F. Time Reset & Auto Reboot). Everything else works fine but my Wifi does not turn on. Bluetooth & H+ (3G) are also working fine. Can you please tell me whether I need to update modem? I was rooted previously & Knox is at 0x1. Can you share the link for flashing the modem if it's required? Or any other solution please.
Click to expand...
Click to collapse
I also flashed UAE Lollipop OG4 but my WiFi and Bluetooth still not turning on.

I don't know how and why you guys have these problems!
Anyway, I am sure you must have fully wiped the device before upgrading right? By full wipe I mean wiping everything, TWRP - Advanced Wipe - Select all (except external SD of course) and then flash the ROM via Odin.

ithehappy said:
I don't know how and why you guys have these problems!
Anyway, I am sure you must have fully wiped the device before upgrading right? By full wipe I mean wiping everything, TWRP - Advanced Wipe - Select all (except external SD of course) and then flash the ROM via Odin.
Click to expand...
Click to collapse
Nops. I told from the start that I am fully Stock, Never rooted. So I just Cleared cache and Factory data..
Downloaded and Tried to Installed Hong Kong OH3 but failed Twice..
Boot looped in Download mode with yellow triangle.
Reflashed UAE Lollipop again.
What should I flash now? Taiwan Rom OG3 or Nordic countries OF3?
Sent from My LG G Flex LG-F340K Stock KitKat V20D on LTE Network using XDA Free Mobile app

When i restart my phone it shows set warranty bit : Kernel
how can i slove this peoplem
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
i haved a proplem woth the sm-n9005 when i ever restart my phone it shows set bit warranty bit : kernel
and i have a question if i donloaded a new firmware does the imei will change pls replay fastly

No imei does not change.
Warranty bit kernel is correct.
Details found via SEARCH.
https://forum.xda-developers.com/search/forum/2494?query=set warranty bit : Kernel
Reason. Custom rom kernel etc.