Database Users

New firmware SE rom DXLP8 wifi fix

New build for southeast asia Nov.2012
Finally, confirm fix wifi issue.
Load at sammobile , flash with Odin.
I have no more wifi can't connect anymore , only sometime it may take a while before connect.Also test with previous unable to connect router.
really recommend

Just saw notification and updated OTA.
Hopefully wifi will be fine now.
Sent from my GT-P6800 using xda app-developers app

I can confirm that the new Singapore ics rom fixes the wifi problem.

Confirmed can use!
Sent from my GT-S5570 using xda premium

a latest rom LQB from Ukraine has been released, but i just don't know what's the difference with LP8

arthurson said:
a latest rom LQB from Ukraine has been released, but i just don't know what's the difference with LP8
Click to expand...
Click to collapse
KERNEL and MODEM are the same size, ROM is larger, probably more languages and apps...

Are you sure that the DLXP8 builds fix the isse? I flashed the Singapure one from samsungfirmwares using Mobile Odin over Q2 Austria ICS and still see issues...especially compared to my Motorola Droid...
Can you provide a link to the exact file of the firmware he thinks got once and for all rid off the wifi bug? I think that might be really helpful. Thanks.

I never had wifi problems, apparently only some routers cause it, flashed the last ROM just in case

neo21 said:
Are you sure that the DLXP8 builds fix the isse? I flashed the Singapure one from samsungfirmwares using Mobile Odin over Q2 Austria ICS and still see issues...especially compared to my Motorola Droid...
Can you provide a link to the exact file of the firmware he thinks got once and for all rid off the wifi bug? I think that might be really helpful. Thanks.
Click to expand...
Click to collapse
I'm recommend you to do a fresh install... dont flash it over the old firmware...

Apart from DXLP8 I just bought Asus router RT-AC66U.
All the wifi issue solved :thumbup:

Astrix Ashburn said:
Apart from DXLP8 I just bought Asus router RT-AC66U.
All the wifi issue solved :thumbup:
Click to expand...
Click to collapse
Not sure if it's just me, but I noticed there are still some wifi issues with DXLP8.
WIFI works very well in general. However, if I left the tablet idle for long period of time, eg an hour. Then I try to use it again, I would not be able to browse internet even though the WIFI status shows connected. I have to toggle off the WIFI and reconnect to get it back to work.
Did any one experience similar problem?
Thanks

[Q] I9300XXLIB not working with CM11

Does anyone have a matching modem for CM11? It seems not matter which modem I switch to, I can't hang-up any calls. This was the problems I was having with CM10 until I upgraded to I9300XXDLIB.
So which one do I need to upgrade to now?
I can't seem to locate a modem for the i9300XXDLI2 or i9300XXDLI3 RIL that my phone has after I upgraded to CM11. And GETRIL does not have a RIL for I9300XXDLIB. It's a catch22. WTF?
Could someone point me in the right direction?

fbarcenas said:
Does anyone have a matching modem for CM11? It seems not matter which modem I switch to, I can't hang-up any calls. This was the problems I was having with CM10 until I upgraded to I9300XXDLIB.
So which one do I need to upgrade to now?
I can't seem to locate a modem for the i9300XXDLI2 or i9300XXDLI3 RIL that my phone has after I upgraded to CM11. And GETRIL does not have a RIL for I9300XXDLIB. It's a catch22. WTF?
Could someone point me in the right direction?
Click to expand...
Click to collapse
have you tried the MG4 modem?

Where do I find it? Most all of them say 4.1.2 . will it still work with Android 4.4?
Sent from my GT-I9300 using Tapatalk 4

fbarcenas said:
Where do I find it? Most all of them say 4.1.2 . will it still work with Android 4.4?
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
read this
http://forum.xda-developers.com/showpost.php?p=43946365&postcount=15
owh and do a efc and nandroid backup just in case
there is a zip file in that link called my emergency zip it has mg4 modem

Blackwolf10 said:
read this
http://forum.xda-developers.com/showpost.php?p=43946365&postcount=15
owh and do a efc and nandroid backup just in case
there is a zip file in that link called my emergency zip it has mg4 modem
Click to expand...
Click to collapse
OK, from what I understand the MG4 modem is for people that have issues with their modem registering. That is not my issue, I can make calls, I just can't hangup.
I'm looking for a way to fix my hangup issue. Other than that, my phone works fine. I have internet, I can receive calls. Everything works. I just can't hangup.
Does that help you better understand my issue?

fbarcenas said:
OK, from what I understand the MG4 modem is for people that have issues with their modem registering. That is not my issue, I can make calls, I just can't hangup.
I'm looking for a way to fix my hangup issue. Other than that, my phone works fine. I have internet, I can receive calls. Everything works. I just can't hangup.
Does that help you better understand my issue?
Click to expand...
Click to collapse
well I was on Cm11 too and mine was all fine
ok u can try getting the latest build with full wipe maybe that will help

Blackwolf10 said:
well I was on Cm11 too and mine was all fine
Click to expand...
Click to collapse
Your sig shows S4 Revolution v10 which is a 4.2.2 based rom. Not a 4.4.2 based rom like CM11.

Blackwolf10 said:
ok u can try getting the latest build with full wipe maybe that will help
Click to expand...
Click to collapse
I had already tried a full wipe. It still would not hang up. Maybe a wipe script might be better.

http://forum.xda-developers.com/showthread.php?t=2076857
u can try them any 412 modems. i have ma5 modem works fine on omni.

I got feed up and switched to OMEGA v51 I comes with modem/ril and it all works together right out of the box(so to speak). Why can CM get their act together and deliver a modem that works with their updates. If they can´t included because it´s not open source, they should at least put a link or something in the WIKI or in the installer or something like that.

If u r having problems, u have 2 reach a solution. 4 example install it any 412 modems not roms cuz long way anyway ur choice ur problem.

fbarcenas said:
Your sig shows S4 Revolution v10 which is a 4.2.2 based rom. Not a 4.4.2 based rom like CM11.
Click to expand...
Click to collapse
actually my signature is outdated and S10 revolution is a 4.3 based rom
I was on 4.2.2 then I went on s4 revolution 10 which is based on 4.3 so there was no signal so I flashed MG4 modem and everything was working good until I found some bugs in the rom so I switched to Cm11 which and I had no hanging issues

It turned out to be just a bad nightly. The next one fixed it. I restored to the Cm11 backup and ran an update to 12-16 and *poof* I could hangup all of a sudden.

I have had this experience with cm roms both on my motorola xt912 and galaxy s3
eventually i just changed to slimbean rom to rectify
Digicel & LIme network gsm St.Lucia

Zizza said:
I have had this experience with cm roms both on my motorola xt912 and galaxy s3
eventually i just changed to slimbean rom to rectify
Digicel & LIme network gsm St.Lucia
Click to expand...
Click to collapse
I have digicel too I'm from Barbados
Sent from my GT-I9300 using Tapatalk

livystewy said:
I have digicel too I'm from Barbados
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Bigup!! Caribbean Neighbor
Have u been having similar issues?

Zizza said:
Bigup!! Caribbean Neighbor
Have u been having similar issues?
Click to expand...
Click to collapse
Yes but I got fed up and went straight to 4.3
Sent from my GT-I9300 using Tapatalk

Problems with rom d80210f-466-92

Hello guys,
I need some help. Yesterday I received my new LG G2 D802 which ive imported from Hong Kong. It came with "d80210f-466-92" rom and ive been trying for hours to change it to a dutch or european rom but it wont work.
I did a factory reset through the menu and installed the LG Mobile Support tool and the drivers. Ive been running UpTestEx and it seems to be running the update but after turning on and doing a complete wipe (with the down button and powerbutton) the rom remains the same. Ive been trying this with the European rom and the dutch rom but no succes. After the update it starts up in chinese/korean or idk what language that is and the rom remains "d80210f-466-92" . Does someone know what might be the problem?
Does anyone know this rom? I seem to find little information about it and more people seem to have trouble witht this rom.

Does it come up with 10f or do u update it? I have the same g2 but im on d80210b-466-92 and i havent got any updates

My G2 is from Singapur,i can flash all Kdz for D802,from Holland,Italy,German etc...

Hi guys,
My G2 firmware is d80210b-466-92 , and i have the same problem like Iniesta89.
Any solution?

grab a open europe kdz, and flash via return to stock way stickied in general. Then you will have europe rom. But first root and backup your emei off the phone on your pc.
Sent from my g2 using xda app-developers app

I think I have the same issue.
My new LG came with D80210b-466-92 firmware and I flashed it with the UK T-Mobile version - also tried the Eur open version.
However, while the phone took the firmware upgrade, its still showing the old version of firmware i.e. D80210b-466-92. I've done the hard reset and the phone restarts in Chinese. Once I change to English its fine and all the Chinese apps are gone but its still showing the old firmware???

podge3 said:
I think I have the same issue.
My new LG came with D80210b-466-92 firmware and I flashed it with the UK T-Mobile version - also tried the Eur open version.
However, while the phone took the firmware upgrade, its still showing the old version of firmware i.e. D80210b-466-92. I've done the hard reset and the phone restarts in Chinese. Once I change to English its fine and all the Chinese apps are gone but its still showing the old firmware???
Click to expand...
Click to collapse
OK, I think I can (sort of) answer my own question.
I just updated to Kitkat. The software info says its on 4.4.2 and the software version is d80220a-466-92.
So, there is no doubt that the firmware has updated, but it seems like the version number xxxxxx-466-92 probably doesn't.

podge3 said:
OK, I think I can (sort of) answer my own question.
I just updated to Kitkat. The software info says its on 4.4.2 and the software version is d80220a-466-92.
So, there is no doubt that the firmware has updated, but it seems like the version number xxxxxx-466-92 probably doesn't.
Click to expand...
Click to collapse
Hi,
How did you get update for D80210b-466-92?
I'm still on it and still don't have Kit-Kat update....

andonedroid said:
Hi,
How did you get update for D80210b-466-92?
I'm still on it and still don't have Kit-Kat update....
Click to expand...
Click to collapse
Follow instructions here: http://forum.xda-developers.com/showthread.php?t=2432476

What ROM did you use?
Sent from my LG-D802 using xda app-developers app

andonedroid said:
What ROM did you use?
Sent from my LG-D802 using xda app-developers app
Click to expand...
Click to collapse
The Vodafone Germany one.

Thanks a lot!
Sent from my LG-D802 using xda app-developers app
---------- Post added at 10:12 AM ---------- Previous post was at 09:25 AM ----------
podge3 said:
The Vodafone Germany one.
Click to expand...
Click to collapse
By the way, did you have any problems with 4.2.2 since update?

Stuck on low battery - 4.4 Kitkat update problem

Hi All:
I am not experienced with smart phones and therefore would like to seek your advice/assistance regarding an issue that came up with my S 4 GT-I9505 International.
What happened:
- The 4.4 Kitkat update came out on my phone through my provider (Rogers, Canada)
- I downloaded the update via Wifi and began its installation at a relatively low battery
- During the update, precisely after the reboot while the % bar with the android guy was filling up, I plugged in my phone to ensure it would not die (wall outlet)
- Coming back to the phone after some time I noticed it was OFF
My phone is the international version, unlocked and was going to be sent to Europe (Portugal) based on the language of the manual and the fact that it came with a North American adapter.
What I have done since then:
- The phone turns on and the Samsung words appear on the screen with the model number and then it goes BLACK
- When plugged in, it turns on and shows the ''very low'' battery symbol and stays like that
- It is recognized through USB but does not connect to Kies
I have done the factory restore and cache wipes, those work fine. But when I do go to reboot the device I notice that "Error!" appears under the little android guy momentarily before booting up.
Any help is well appreciated. Thanks so much.
Jay

Its a brick .....u need to flash a stock firmware via odin
Hit thanx if I helped u
---------- Post added at 07:46 AM ---------- Previous post was at 07:41 AM ----------
http://forum.xda-developers.com/showthread.php?t=2673134 here u will get the full guide to unbrick your phn and also download firmwarepackages through alternative download links (faster)

aerospaceCU said:
Hi All:
I am not experienced with smart phones and therefore would like to seek your advice/assistance regarding an issue that came up with my S 4 GT-I9505 International.
What happened:
- The 4.4 Kitkat update came out on my phone through my provider (Rogers, Canada)
- I downloaded the update via Wifi and began its installation at a relatively low battery
- During the update, precisely after the reboot while the % bar with the android guy was filling up, I plugged in my phone to ensure it would not die (wall outlet)
- Coming back to the phone after some time I noticed it was OFF
My phone is the international version, unlocked and was going to be sent to Europe (Portugal) based on the language of the manual and the fact that it came with a North American adapter.
What I have done since then:
- The phone turns on and the Samsung words appear on the screen with the model number and then it goes BLACK
- When plugged in, it turns on and shows the ''very low'' battery symbol and stays like that
- It is recognized through USB but does not connect to Kies
I have done the factory restore and cache wipes, those work fine. But when I do go to reboot the device I notice that "Error!" appears under the little android guy momentarily before booting up.
Any help is well appreciated. Thanks so much.
Jay
Click to expand...
Click to collapse
Are you really sure your charger works? Are you sure your battery is not damaged? Try with a different charged battery and you will get your answers.
Enviado desde mi GT-P7510 usando Tapatalk 2

Oh didnt noticed last two things

aerospaceCU said:
Hi All:
I am not experienced with smart phones and therefore would like to seek your advice/assistance regarding an issue that came up with my S 4 GT-I9505 International.
What happened:
- The 4.4 Kitkat update came out on my phone through my provider (Rogers, Canada)
- I downloaded the update via Wifi and began its installation at a relatively low battery
- During the update, precisely after the reboot while the % bar with the android guy was filling up, I plugged in my phone to ensure it would not die (wall outlet)
- Coming back to the phone after some time I noticed it was OFF
My phone is the international version, unlocked and was going to be sent to Europe (Portugal) based on the language of the manual and the fact that it came with a North American adapter.
What I have done since then:
- The phone turns on and the Samsung words appear on the screen with the model number and then it goes BLACK
- When plugged in, it turns on and shows the ''very low'' battery symbol and stays like that
- It is recognized through USB but does not connect to Kies
I have done the factory restore and cache wipes, those work fine. But when I do go to reboot the device I notice that "Error!" appears under the little android guy momentarily before booting up.
Any help is well appreciated. Thanks so much.
Jay
Click to expand...
Click to collapse
I think it's a case of soft brick..
If your warranty is intact then go to Samsung care they will fix it for you.
Don't tell then what exactly happened. .
Say I updated and it's not working..
Sent from my GT-I9500

Thanks for the replies everyone. I will attempt these solutions.
Does anyone advise against going to one of those kiosk style cellular repair shops?
Jay

aerospaceCU said:
Thanks for the replies everyone. I will attempt these solutions.
Does anyone advise against going to one of those kiosk style cellular repair shops?
Jay
Click to expand...
Click to collapse
Before doing that, try to buy a new battery and test it. In the worst-case you will get a new replacement battery ; in the better case you will save a lot of money trying to repair something that it is not needed to be repaired.
Enviado desde mi GT-I9500 usando Tapatalk 2

Hey all,
Good news. So I got on SamMobile.com, grabbed a UK 4.3 Android file and used Odin to flash it onto my unresponsive S4. It worked like a charm and the phone is back up and running.
Just a few questions as I am new to "flashing":
So now that I will have to flash UK releases of the latest firmware as my Canadian network provider will probably brick my phone every time they release the latest firmware, should I simply wait for the internet to have the latest firmware of my regions version and flash it every time via odin?
Also, is flashing over time going to decrease my phone's performance in terms of processing speed and memory (RAM)?
Finally, any suggestions that are different from what I plan to do as described above?
Thanks to everyone who contributed, I "thanked" the posts.
Jay

You can flash the latest release of your region nd then follow ota updates .....

aayushkhajuria2842 said:
You can flash the latest release of your region nd then follow ota updates .....
Click to expand...
Click to collapse
Aren't OTA updates from my network provider which would mean that installing their firmware update would result in bricking? May you please elaborate?
Thanks.

Why would it brick installing their firmware .....u r on 4.3 without root so why would I m not able to understand ur question either

aayushkhajuria2842 said:
Why would it brick installing their firmware .....u r on 4.3 without root so why would I m not able to understand ur question either
Click to expand...
Click to collapse
Well OK I use my phone in Canada but since its a UK phone I went out and got the UK firmware. So now when I get the latest firmware update (4.4) from Canada, won't it brick?
I mean that is what happened last time...
The phone is unlocked and I have never rooted it. Just used Odin to throw on the firmware.
Thanks.

aerospaceCU said:
Well OK I use my phone in Canada but since its a UK phone I went out and got the UK firmware. So now when I get the latest firmware update (4.4) from Canada, won't it brick?
I mean that is what happened last time...
The phone is unlocked and I have never rooted it. Just used Odin to throw on the firmware.
Thanks.
Click to expand...
Click to collapse
Last time u said u had less battery I dont think flashing canada firmware will brick your phn

aayushkhajuria2842 said:
Last time u said u had less battery I dont think flashing canada firmware will brick your phn
Click to expand...
Click to collapse
Ya I mean I did updates BEFORE the last one so that got me thinking, maybe it WAS the battery...
So do you think its safe that I go and try to update my firmware from my network provider on top of the UK firmware I put on it just last night?
Thanks!

U can flash any firmware on any othe bt just cant downgrade from 4.4.2 if u flashed it

aayushkhajuria2842 said:
U can flash any firmware on any othe bt just cant downgrade from 4.4.2 if u flashed it
Click to expand...
Click to collapse
No I mean like, is it safe if I just do an "update" in my settings on the phone? That won't brick my phone if my battery is charged?

Yes updating in this way is the safest but u should have adequate battery

TYVM

aerospaceCU said:
TYVM
Click to expand...
Click to collapse
Ur device status must be custom ?
---------- Post added at 09:10 AM ---------- Previous post was at 09:09 AM ----------
I mean is your device status custom

aayushkhajuria2842 said:
Ur device status must be custom ?
---------- Post added at 09:10 AM ---------- Previous post was at 09:09 AM ----------
I mean is your device status custom
Click to expand...
Click to collapse
no it is OFFICIAL. and now when I try to do an update it says everything is updated.
but im on 4.3 and Rogers just put out 4.4.2 or Kitkat, or whatever....hmmm....weird...

New Update N910VVRU2BPA1

I've been chatting with Samsung Support through Twitter about Kies not taking my serial # for my Note 4. They asked for my serial # and my imei #, so I gave it to them and they asked what version i was on and told them BOK3, they wrote back saying there is a newer version, so I asked which one is it. So here is a screenshot.
OTA Update provided by @hsbadr thanks to @doinsvelt
Official Firmware & OTA Update from N910VVRU2BOG5 to N910VVRU2BPA1: http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937
Safe Upgrade N910VVRU2BPA1 http://forum.xda-developers.com/showthread.php?p=65278655
Update: if your battery takes a dump with the OTA, it is recommend that you do a repair via the Verizon assistant or via Kies. But if you are on a safe upgrade version then this will take you out of safe upgrade and keep you on BOG5 incremented bootloader.

Maybe a new Samsung version, but maybe not a Verizon version?
Sent from my SM-N910V using XDA Free mobile app

Here are the screenshots.
They responded back that it is 5.1.1 with security patches

So Samsung says there is another version they have out. But has Verizon released it yet? The manufacturer releases versions to the carriers who then release it to the phone owners after they do their "branding". Case in point, Samsung released 6.0.1 for the Note 4, but we don't have it yet. So
Sent from my Amazon Tate using XDA Free mobile app

I just got this update. Here it is.

It's up and running now. The wifi notification is gone which is great.

Got it here as well. Glad the wifi notification is gone.... now to see if it still references AT&T in the Wifi Settings. LOL

My bad, I got it too.
Sent from my SM-N910V using XDA Free mobile app

Hopefully it fixes my battery life problem, after the 5.1.1 update my battery life is TERRIBLE. It is the worse it has ever been and that's with trying to different factory OEM batteries.......The Note 4 really was a disappointment for a phone with such awesome hardware...

If anybody able to pull OTA and link it, I would put in the OP, I have it downloaded, but not installed. If anybody can guide me to pull it, I would appreciate it

Interesting
thegipper said:
Hopefully it fixes my battery life problem, after the 5.1.1 update my battery life is TERRIBLE. It is the worse it has ever been and that's with trying to different factory OEM batteries.......The Note 4 really was a disappointment for a phone with such awesome hardware...
Click to expand...
Click to collapse
My Battery life got better after the first 5.1.1 update. Weird.

Yes, so glad the wifi notification is gone!

Please if someone could capture... it will be awesome, sammobile still not post 5.1.1, so it would be almost a year until they put BPA1 available, the only way i installed 5.1.1 was from a zip file someone upload it

EdrickMG said:
Please if someone could capture... it will be awesome, sammobile still not post 5.1.1, so it would be almost a year until they put BPA1 available, the only way i install 5.1.1 was from a zip file someone upload it
Click to expand...
Click to collapse
Hi,i was wondering how you go about installing 5.1.1 zip. Well my question is ,are you using a retailer edition and what recovery you went into flash?,is it stock recovery if you're using RE?,am just little confuse about it.Thank you in advance.

desmond462 said:
Hi,i was wondering how you go about installing 5.1.1 zip. Well my question is ,are you using a retailer edition and what recovery you went into flash?,is it stock recovery if you're using RE?,am just little confuse about it.Thank you in advance.
Click to expand...
Click to collapse
I don't remember I belive it's called 5.1.1 something forum, I have a retail, and you are right I enter to the normal recovery stock... And flash it with no troubles

EdrickMG said:
I don't remember I belive it's called 5.1.1 something forum, I have a retail, and you are right I enter to the normal recovery stock... And flash it with no troubles
Click to expand...
Click to collapse
Ok then i might try it,with little guidance from you,it would be greatly appreciated.Thank you again for your reply. So could u tell me what is the performance like?,is it better so far or not much of a difference and how is battery life?

desmond462 said:
Ok then i might try it,with little guidance from you,it would be greatly appreciated.Thank you again for your reply. So could u tell me what is the performance like?,is it better so far or not much of a difference and how is battery life?
Click to expand...
Click to collapse
Its quite simple indeed just download the zip file from the forum 5.1.1 then save it in ur sd card, press up volume, power and home button at the same time to access stock recovery, navigate to option where is says update from a file, there you go it will update to 5.1.1, batter been slightly different (not a big improvement) im indeed a very very heavy user.... i received emails all day from my job, need to check whatsapp several times, there is some annoyances however... like wifi notification that is connected never go away... the wireless and fast charging notification remain in 5.0.1 now in 5.1.1 just says it once time and disappear, album cover full screen its completly gone.... performance in task screen and some apps display faster and also navigate throught touchwiz its a little bit better... not a BIG BIG difference... they put connect to at&t network (even thou its verizon), everything its fixed in BPA1 update so if you want to give a shot go ahead... i mean its not a big big diference but if you are bored of being in 4.4.4 or 5.0.1 go ahead! good luck

This may need to go devs but notice every time you boot into recovery on this update it says "installing update". Not sure exactly what that means cause I am no dev but it seems like the the recovery is more locked down on this update.
I also did factory reset after update. So not sure why it would do that every time booting into recovery.

for last week battery been dropping fairly quickly to about 40%, then stopping abruptly. Got the update last night. After almost 12 hours on battery, it is still at 88%.

My battery wasn't doing very well until I disabled fast charging and charged regularly. But have always noticed that even on kitkat