Salut. Today I recieved 2.3.5 on my sgs2. Does somebody know what's new...comparing to the previous 2.3.3?
Correction...it's 2.3.5
Any improvements? Wifi?
Sent from my GT-I9100 using XDA App
can you tell me what version do you have?
and what was the original firmware version from what you received the update...because i forgot the original that i have previous instaled.
thanks
it KH1.
look here
http://forum.xda-developers.com/showthread.php?t=1113928
strange....it said...my software cannot be upgraded trough kies...and i just instaled the KH1. Do i need also the kernel from kh1 for a kies update?
EDIT: yes , the kernel is needed..just updated to official kj4
EDIT2: after update...i didn't like it much, and just restore my nadroid backup (vr3.0 KI4,syiah2.1.1)...unfortunately, my baseband remain I9100BVKJ4. Maybe with this baseband, the usb jig exploit will not work anymore ...i will test it tomorrow at work
It's version KJ4.
the update came via kies.
Sent from my GT-I9100 using XDA App
BVKJ4 is the latest. It's in the carrier firmware thread for those that prefer Odin.
hhhans1 said:
Maybe with this baseband, the usb jig exploit will not work anymore ...i will test it tomorrow at work
Click to expand...
Click to collapse
This update contains new bootloader so you'll need to flash the old bootloader to use jig, old one can be found on here i just can't remember where at the moment
Sent from my GT-I9100 using XDA App
seanicca said:
This update contains new bootloader so you'll need to flash the old bootloader to use jig, old one can be found on here i just can't remember where at the moment
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I allways have backups, and sbl collection..so this it will not be a problem.
But allways, when you start the phone with the new firmware, you have a feeling if is better or not...and i didn't have any of those with this BVKJ4
Hi, does it contain signal boost?
HI
I Have a Orange UK handset and i have just had the 2.3.5 Update via KIES
It is now gingerbread BVKJ4
Signal Boost is on my handset
Just wanna know which kernel i should use to root sg2 (BVKJ4)?
hardcore's works great for me.
Can someone upload / link the modem from this ROM?
Also got my 2.3.5 last night on O2 UK
Good times
Sent from my GT-I9100 using XDA App
mrjay said:
hardcore's works great for me.
Click to expand...
Click to collapse
I am not sure waht you mean - i am trying to root my hanset and want to get it right. Is there any way yoiu could send me a link to correct kernel?
Many thanks in advance
What i find strange is that i have an unbranded handset from CPW and no update received. I am not that fussed really...except for the fact that when i updated to 2.3.4 my wifi got screwed so i am hoping for a fix.
Sent from my GT-I9100 using XDA App
Related
I am currently of DXJG4. Plugged in to Kies today and it says there is a new firmware to upgrade. Could it be the frozen yoghurt?
What is the FW name ??
Yeah what is it
Sent from my GT-I9000 using XDA App
sure its not just the kies update? Else you should had written the fw when asking if its froyo. How else could anyone answer?
Sent from my GT-I9000 using XDA App
LuffarJoh said:
sure its not just the kies update? Else you should had written the fw when asking if its froyo. How else could anyone answer?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Not kies. There's a page popup that says upgrade will wipe data blah blah. Have to check agree to proceed. But it did not say name of fw. Will upload screen shot when I get home tonight
I did not get that... What is your kies version. Kies is really nonsense to begin with.
Sent from my GT-I9000 using XDA App
Singapore, SingTel, DXJG4, Kies 10093_81, No update available.
Okay, below is what I see when I click on the upgrade firmware button. As you can see, it didn't state what's the name or version of the FW. I really dun want to upgrade if it's not froyo as I am very happy with my current JG4. If anyone in Singapore (Singtel) tried, please let me know what FW is it.
Seifer1975 said:
Okay, below is what I see when I click on the upgrade firmware button. As you can see, it didn't state what's the name or version of the FW. I really dun want to upgrade if it's not froyo as I am very happy with my current JG4. If anyone in Singapore (Singtel) tried, please let me know what FW is it.
Click to expand...
Click to collapse
That's standard text even if there is no new FW!
Seifer1975 said:
Okay, below is what I see when I click on the upgrade firmware button. As you can see, it didn't state what's the name or version of the FW. I really dun want to upgrade if it's not froyo as I am very happy with my current JG4. If anyone in Singapore (Singtel) tried, please let me know what FW is it.
Click to expand...
Click to collapse
The screenshot doesn't reveal anything about the firmware. You have to proceed to where it shows your current firmware and the firmware it wants to upgrade to. Don't worry, you won't upgrade the firmware untill you tell it to on that screen.
Regards
Apologies all. When I clicked upgrade, it goes on to tell me I already have the latest firmware ... BTW, I have never seen that screen before. Previously it will straightaway take me to the screen that shows the FW version. Really pai seh..
HTCDiemond said:
What is your kies version.
Click to expand...
Click to collapse
+1
What Kies version do you have?
edit: nevermind...
OK I'm also from Singapore(Singtel) and I when through the upgrade from Kies.
This is what I get in the end.
Model name:GT-I9000
Current VersionDA:JF4/PHONE:JF4/CSC:OLB
The latest version is already installed on connected device.
My Kies version 1.5.3.10093_80
No upgrade!
For a moment, I almost tot froyo was here..'....haha false alarm
Sent from my GT-I9000 using XDA App
lol . .. .
Guess the waiting would continue. Haha. Maybe they will surprise us with ginger bread xD
Sent from my GT-I9000 using XDA App
I see Kies has a new update today it's now version 1.5.3.10093.81 or is this old news?
I am currently running I9000XXJPK with the lag fix and it has worked flawlessly for 3 days now.
@ op, are u blind or just can't read?
Sent from my GT-I9000 using XDA App
please change the thread's title.
Mods Close the Thread ... Hoax !!
Hi friends
New rom I5801ZHJPF is available for galaxy 3 (samfirmware.com)
Has anyone tested?
Update
I flashed it,
1) no click sound during calls
2) screenshot works
3) better speed than orange
4) clean rom, no junk preinstalled
5) battery yet to check
Sent from my GT-I5801 using XDA App
already thread on the same merging this with the same
hi
for ur info i just saw new Asia 2.2 firmware today I5801ZHJPF ## dated March 2011 pls get the same from : www.samfirmware.com
link : http://hotfile.com/dl/112104901/352c9c8/I5801ZHJPF.rar.html
Pass word : samfirmware.com
tnx
hari
it's seems that it is different from JPM or other firmware
so far so good.
Just got the phone up. So not much testing done. But screen capture does work.
hi hari can u check I5801ZHJPF this firmware.. how its works and what about battery life..
dhruvasoni said:
hi hari can u check I5801ZHJPF this firmware.. how its works and what about battery life..
Click to expand...
Click to collapse
Just finished installation of this firmware.
First noticeable difference is that baseband version is different from previous versions, i think different from JPM too...
Will try this firm for a day or more and will post the comments.
jaskiratsingh said:
Just finished installation of this firmware.
First noticeable difference is that baseband version is different from previous versions, i think different from JPM too...
Will try this firm for a day or more and will post the comments.
Click to expand...
Click to collapse
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
ronhoover88 said:
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
it is for Hongkong ..!! (ref- Check your status of your firmware here link on samfirmware)
ronhoover88 said:
Is it a operator locked firmware or is it a free firmware?what is the default language?
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
free firmware with chinese as default language
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
ROLY5573 said:
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
Click to expand...
Click to collapse
What about battery?
ROLY5573 said:
I flashed this yesterday, after having bvjp9 for a while. I like it and it certainly feels faster. UK English was default language for me, although, i had to change the keyboard from Chinese to Samsung. No issues thus far, and little bloatware.
Sent from my GT-I5801 using XDA Premium App
Click to expand...
Click to collapse
hi
it did not work for me i don't know what i did wrong
it got stuck on the white samsung screen did not go beyond that
so went back to JPM
tnx
hari
haree said:
hi
it did not work for me i don't know what i did wrong
it got stuck on the white samsung screen did not go beyond that
so went back to JPM
tnx
hari
Click to expand...
Click to collapse
it wont work from JPM. You need to rollback to DDJG6 and then update to this one....
Also remove boot.bin and sh.bin from package to avoid bricking
i notice this ,Taiwan ver is ZFJPF is Provider firmware
have Q MARKET and some useless software inside
this ver I5801ZHJPF is me update from kies ZHJH1 "street buy ver"
it have a "windows live msg" is only work on hongkong 3G network(wifi is not work)
Been using this ROM since morning. So far so good. Below is my observation:
1. Battery bug is there. When battery goes down, restart phone and it is good again
2. GPS is same as JPM. Got sattelite connection in under 10 seconds
3. I dnt know but looks like its me with the popping sound. Majorly happens when i am using headphones and screen goes Blank. Wake up the phone and it pops
4. Media Scanning takes longer than JPM
god_md5 said:
i notice this ,Taiwan ver is ZFJPF is Provider firmware
have Q MARKET and some useless software inside
this ver I5801ZHJPF is me update from kies ZHJH1 "street buy ver"
it have a "windows live msg" is only work on hongkong 3G network(wifi is not work)
Click to expand...
Click to collapse
The version I used was ZHJPF, downloaded from another post, using medifire, before this was released by Samfirmware, and there are no erroneous apps present.
I am now able to browse the internet using HSPDA, previously only 3G was available to me using JP9. Perhaps my GiffGaff signal has improved, but it seems coincidental.
It is most definitely faster, than JP9, and, I will be keeping a close watch on battery life. WiFi and GPS are also working well. I am now rooted, and my Live Wallpapers are running smoothly.
I wanted to keep my 5801 identity, and until we get something decent in Europe, I would recommend this firmware, as a good Froyo base.
ROLY5573 said:
The version I used was ZHJPF, downloaded from another post, using medifire, before this was released by Samfirmware, and there are no erroneous apps present.
I am now able to browse the internet using HSPDA, previously only 3G was available to me using JP9. Perhaps my GiffGaff signal has improved, but it seems coincidental.
It is most definitely faster, than JP9, and, I will be keeping a close watch on battery life. WiFi and GPS are also working well. I am now rooted, and my Live Wallpapers are running smoothly.
I wanted to keep my 5801 identity, and until we get something decent in Europe, I would recommend this firmware, as a good Froyo base.
Click to expand...
Click to collapse
can u plz post the link for the fw u got from mediafire.. i wanna chek it out mate!! thanz in advance
drajax said:
can u plz post the link for the fw u got from mediafire.. i wanna chek it out mate!! thanz in advance
Click to expand...
Click to collapse
Here is the medifire link for I5801ZHJPF
http://www.mediafire.com/?rea1ua6dhi9ua39
I like this firmware, but I can't say that I have noticed any change in battery usage.
Hi Guys,
I am facing problem re-upgrading to this ROM. Due to certain reason i had to install JPM. Afterwards i rolled back to DDJG6 and updated to this one but stuck at Samsung Logo.
Tried removing cache, factory reset but unable to upgrade to this one...
Kindly suggest
jaskiratsingh said:
Hi Guys,
I am facing problem re-upgrading to this ROM. Due to certain reason i had to install JPM. Afterwards i rolled back to DDJG6 and updated to this one but stuck at Samsung Logo.
Tried removing cache, factory reset but unable to upgrade to this one...
Kindly suggest
Click to expand...
Click to collapse
The Baseband version for this is I5801ZHJP3; not sure that helps you, but when I flashed initially, I went from JP9, and did not factory reset, and it worked just fine as an upgrade. I tried it, liked it and then reset and clean flashed.
Samfirmware twittered Froyo by the end of April for Galaxy 3, so our best bet is to try and use what we can for now.
As the title says just spotted this on twitter, now who is going to try this first!
http://hotfile.com/dl/121450355/2a1ed4f/I9100XWKF3_KCLKF1_XXKE7.rar.html
I will... Where can I download it?
Sent from my GT-I9100 using XDA App
Edited first post with a link
phorcesquad said:
I will... Where can I download it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Link to the file: http://hotfile.com/dl/121450355/2a1ed4f/I9100XWKF3_KCLKF1_XXKE7.rar.html
Cheers Here's a mirror:
http://www.multiupload.com/ABMQQY8GJH
would like to see what this does leme know how it goes...
quick question i am new to android...i have a rooted uk handset with ke7 firmware...from what i have been reading am i right in thinking this kf3 is the next one for the uk??? and if i do update using this will i lose my root and need to re root
thanks
and " KCL" mean??
rikz112 said:
would like to see what this does leme know how it goes...
quick question i am new to android...i have a rooted uk handset with ke7 firmware...from what i have been reading am i right in thinking this kf3 is the next one for the uk??? and if i do update using this will i lose my root and need to re root
thanks
Click to expand...
Click to collapse
Each time you flash new firmware you will need to re-root
ams84 said:
and " KCL" mean??
Click to expand...
Click to collapse
I was thinking that too.
and remember the password is: samfirmware.com
KCL=Kazakhstan I think
daleski75 said:
Each time you flash new firmware you will need to re-root
Click to expand...
Click to collapse
THANKS very much is this new kf 3 still 2.3.3 im guessing....???
rikz112 said:
THANKS very much is this new kf 3 still 2.3.3 im guessing....???
Click to expand...
Click to collapse
From what samfirmware say yes it is still 2.3.3
yup just checked twitter see that its still 2.3.3 so wont hope for any battery issues to be resolved by this one ....
What modem version is it?
bentez2003 said:
What modem version is it?
Click to expand...
Click to collapse
When people start flashing their phones I am sure one of them will answer your question.
Can I use odin to flash this over the top of stock KE7 XEU?
Will this new firmware change my CSC code?
Thanks.
Is this later than KF4 and will it wipe the phone data?
Today was my first proper day using KF4 and I've watched videos; listened to music, done texts and emails and got info through H on various apps and after 11.5 hrs I'm still on 51% which is the best so far so I'm interested to see if KF3 makes a difference.
Date-wise, KF2 is actually a newer release than KF4, and people are reporting fantastic battery life with KF2.
Kf3 is the europe version im pretty sure samfirmware commented in a thread earlyier saying so
Sent from my GT-I9100 using XDA App
new european firmware for galaxy not
gt n 7000
download here
http://www.hotfile.com/dl/149185137/ab3d947/N7000XXLA6_N7000XEULA1_XEU.zip.html
version 2.3.6
csc N7000XEULA1
2012 February
Wow xeu users finally got an update
Sent from my GT-N7000 using xda premium
indie said:
Wow xeu users finally got an update
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
check in samfirmware.com for more details
Sent from my GT-S5670 -Galaxy fit-belongs to Ajay katwe k using xda premium
Cool
I am installing it right now....had latest Indian Rom so hope this is at least as smooth and fast as that one
I have LB1, do you think it worth to update ?
The Transporter said:
I have LB1, do you think it worth to update ?
Click to expand...
Click to collapse
Maybe something is changed in this new rom, but over all its the same rom with different name as LB1
And how to see which one is newer ?
The Transporter said:
And how to see which one is newer ?
Click to expand...
Click to collapse
this ones the latest i checked in samfirmware......go and just see you will find this rom in latest firmware section...............
The Transporter said:
I have LB1, do you think it worth to update ?
Click to expand...
Click to collapse
LB1 is newer than LA1 . . .
L=2012
A=January
B=February
So you've the newest firmware already!
henklbr said:
LB1 is newer than LA1 . . .
L=2012
A=January
B=February
So you've the newest firmware already!
Click to expand...
Click to collapse
Agree with the above. LB2 is the latest, according to the numbering/naming scheme.
this LA1 is latest for europe
If you have LB1/2, i dont think you need to update, unless you have any problem perticularly in Modem.
b'coz PDA remains same for almost country, some country needs own baseband for better tuning. If you are not satified with modem, you can just update modem rather thn full ROM too.
When LB2 was not out for india, i was using LA4 from germany, i was experiencing call drop, so forced to use modem from old indian ROM.
Just checked my device and it says no update. I'm using the UK Note and haven't had any updates since last year.
Sent from my GT-N7000 using xda premium
spfraggle said:
Just checked my device and it says no update. I'm using the UK Note and haven't had any updates since last year.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
dude its a european firmware.....
ajay8055 said:
dude its a european firmware.....
Click to expand...
Click to collapse
He has an UK Note? isn't that Europe?
If the rom is XEU rom isn't that UK rom
just saw the update via Kies...will be updating a bit later.....anyone can list the advantages?
Tried looking for it via OTA, did not find it. Connected via Kies, and did find this upgrade.
All went smoothly - despite using a Mac and running Windows Kies under Parallels. I hope that reassures anyone who was wondering if that route would work - it does, and the note is now running well with XEU LA1.
Comes on faster, launching seems quick and and Go Launcher EX seems smoother.
ralphrmartin, does superuser stay after you upgraded or must you root it again?
ralphrmartin said:
Tried looking for it via OTA, did not find it. Connected via Kies, and did find this upgrade.
All went smoothly - despite using a Mac and running Windows Kies under Parallels. I hope that reassures anyone who was wondering if that route would work - it does, and the note is now running well with XEU LA1.
Comes on faster, launching seems quick and and Go Launcher EX seems smoother.
Click to expand...
Click to collapse
OT
Why use kies under parallels, there is Kies for mac.
http://www.samsung.com/uk/support/usefulsoftware/KIES/JSP
Just appeared for me in my notification bar. Downloading OTA now.
SIM free UK.
Final5k said:
ralphrmartin, does superuser stay after you upgraded or must you root it again?
Click to expand...
Click to collapse
Dunno. Wasn't rooted.
---------- Post added at 11:24 AM ---------- Previous post was at 11:17 AM ----------
omaga said:
OT
Why use kies under parallels, there is Kies for mac.
Click to expand...
Click to collapse
Doesn't work for me. Just sits there saying "Connect a Device" even after I have connected my Note. No such problem with the same Mac / Cable / USB Port / Note settings using Parallels and Kies under Windows. YMMV.
Did anyone had a chance to review or it is too early?
As mentioned above:
There seems to be a different leak, N7000ZSLPF_N7000OZSLPF_OZS (Android 4.0.3) Taiwan locale. http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=2#regiona
Sam mobile say it is a full wipe rom .
Interesting to see what kernel version it uses
Sent from my iPad using Tapatalk
nandihno said:
Interesting to see what kernel version it uses
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Would be nice if it used a 'safe' kernel....
Downloading now, will probably flash to try, maybe minus the bootloader to start.
downloading, too.
Please report back how it was after flashing. I really want the Traditional Chinese CSC to be honest.
Just checked. This is in fact a Hong Kong firmware.
CSC codes are TGY and BRI.
Have not flashed yet though
hkgrob said:
Just checked. This is in fact a Hong Kong firmware.
CSC codes are TGY and BRI.
Have not flashed yet though
Click to expand...
Click to collapse
Looks like it has some sort of new bootloaders bundled to it as well.
I'm too afraid to flash now after my first note was bricked by the LP series.
sutekidane said:
Looks like it has some sort of new bootloaders bundled to it as well.
I'm too afraid to flash now after my first note was bricked by the LP series.
Click to expand...
Click to collapse
I'd also steer clear of anything with bootloaders.
Calling for the brave people who would test this new rom. We want to check if this rom will be SAFE considering it has a new bootloader.
is it possible that the bootloader plays into all our bricking issues?
xelir13 said:
Calling for the brave people who would test this new rom. We want to check if this rom will be SAFE considering it has a new bootloader.
Click to expand...
Click to collapse
I will answer the call! (I've had a good run so far with ICS) Flashed with a repartition, booted up fine. *2767*3855#, wiped, all good again. Will post an update or two once I continue my usual setup.
EDIT:
Kernel Version
3.0.15-N7000ZSLPF-CL558430
[email protected] #3
SMP PREEMPT Tue May 15 15:49:39 KST 2012
EDIT EDIT:
Sorry folks, can't see any sign of the Premium Pack =/
EDIT EDIT EDIT:
Well, so far so good. Seems a little smoother then LPY, not a single crash or reboot. Looking good. Of course, only time will tell, YMMV etc etc But I would say go for it unless one of the devs says otherwise
tabsterleir said:
I will answer the call! (I've had a good run so far with ICS) Flashed with a repartition, booted up fine. *2767*3855#, wiped, all good again. Will post an update or two once I continue my usual setup.
Click to expand...
Click to collapse
+1
hopefully the brick-bug was solved...
So no premium pack?
What's the size of the update please..
Did you flash through mobile odin? Ever root?
Sent from my GT-N7000 using XDA Premium App
Wasnt most bricks user error?
Sent from my GT-N7000 using xda premium
Koguchi9 said:
So no premium pack?
What's the size of the update please..
Click to expand...
Click to collapse
No premium pack that I can see sorry, maybe a dev could do some digging and unearth something. 648mb zipped, 991mb extracted.
Nayfuslis said:
Did you flash through mobile odin? Ever root?
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Odin PC with repartition set, I haven't rooted my Note as of yet, sorry (Probably don't plan to either)
Can you provide the screenshot of which to selected for which file?
I just flashed with Mobile Odin Pro (from Chrack 18). Injected Everroot, SuperSU and Odin Mobile.
No problem.
Installation was fast. Just connecting to Market. Will add more infos later.