Database Users

Need help.. Bootloader Err:A5,70,70,00,1F

I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.

it works!! Thank you so much!!

anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.

THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!

Thank you sooooooo much!!!! I thought all hope was lost.

Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1

This worked to fix my phone, thx so much
i used the 2.3.20 SBF

will this work on the droid x?

myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App

anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps

Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App

Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again

Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App

Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results

well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.

Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2

Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.

I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.

bricked atrix

hi all , ill be straight ,i yust get my hands into an atrix 4g , it is unlocked , when triyng to get back from cyanogenmod 7 into stock GB by using the batch script thing , the phone gets stucked at sending system.img step ,just after susscessfully flash boot.img , here comes the ugly part , when i was flashing the phone i fell asleep and didnt notice that flashing process got stucked at system.img , when i woke up , the cmd screen says something about trying to reboot phone , not successfully , too many lines (something like that) when i tried to boot it actually boot into fastboot mode , but when i try to get into moto-fastboot it says that battery is too low for flashing , i've triyed to charge it , but still it says that batt is too low , what can i do ? is anyway to get the phone to work ? please help me , i was looking if anyone got the same issue i have but with no luck
sent form the gray stuff inside my skull

This belongs to Q&A.
Maybe try with an external charger.
Sent from my MB860 using xda app-developers app

demonoid phenomenom said:
hi all , ill be straight ,i yust get my hands into an atrix 4g , it is unlocked , when triyng to get back from cyanogenmod 7 into stock GB by using the batch script thing , the phone gets stucked at sending system.img step ,just after susscessfully flash boot.img , here comes the ugly part , when i was flashing the phone i fell asleep and didnt notice that flashing process got stucked at system.img , when i woke up , the cmd screen says something about trying to reboot phone , not successfully , too many lines (something like that) when i tried to boot it actually boot into fastboot mode , but when i try to get into moto-fastboot it says that battery is too low for flashing , i've triyed to charge it , but still it says that batt is too low , what can i do ? is anyway to get the phone to work ? please help me , i was looking if anyone got the same issue i have but with no luck
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
Hey while back this happened to me, I actually went to a friends house he had a droid x they use the same battery pretty much I take the battery out of the atrix and put it in the Droid X and you got to charge then plug it back into the atrix and flashed. It was enough to charge it. But before I went to his house I have went to the Verizon store they had a droid x it was a non corporate store they were nice enough to let me charge my battery inside of a Droid X for 30 minutes
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

actually thats a problem that alot of people have when using rds its just that the battery run out and the phone cant chrage it beacuse it cant boot so.
1.- you can buy or make youre factory cable to be able to charge in rds mode.
2.- buy a battery charger.
3.- use this method by berbedesz user
Today I have encountered the same problem. Yet, I found far easier way to recharge the battery. Just take any USB cable and cut it like below. Then attach the red wire to + marked on Atrix battery and black one to - with scotch tape (I used masking tape for painting as it leaves no glue)> plug into your motorola recharger or PC and give it some time.
Click to expand...
Click to collapse

thx for the quick answers ill try to buy a battery recharger , for the flashing issue (triyed twice before battery dryed out ) , is it whorth the risk to flash via rsdlite ? i mean since the phone failed to do so via batch ? ( ill get the thread link when i get to my home )
sent form the gray stuff inside my skull

demonoid phenomenom said:
thx for the quick answers ill try to buy a battery recharger , for the flashing issue (triyed twice before battery dryed out ) , is it whorth the risk to flash via rsdlite ? i mean since the phone failed to do so via batch ? ( ill get the thread link when i get to my home )
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
i never try the fasboot method i always use rds and never had a problem

lucamibel said:
i never try the fasboot method i always use rds and never had a problem
Click to expand...
Click to collapse
somewhere i readed that flashing GB from almost any custom rom could hardbrick my atrix , but since kernel got flashed and have no system installed ........ i guess its ok , or maybe im just prooving what a noob i am xd
sent form the gray stuff inside my skull

demonoid phenomenom said:
somewhere i readed that flashing GB from almost any custom rom could hardbrick my atrix , but since kernel got flashed and have no system installed ........ i guess its ok , or maybe im just prooving what a noob i am xd
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
Well, potentially anything to do with RSD could hardbrick your Atrix. Just make sure to read all the guides thoroughly, and then read it again for safe measure . Also, make sure to select the proper firmware for your country specific device.

I'd cut a spare usb cable and charge up the battery first, regardless of how you intend to flash the phone. (Assuming you can't be bothered buying a separate battery charger.)
Sent from my MB860 using Tapatalk 2

[Q] Fastboot Reason: Flash Failure

I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad

So did you ever root?
Sent from my Galaxy Nexus using xda premium

skippid said:
So did you ever root?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No. I'd like to eventually but right now, I need to make that fastboot lock screen go away. Please treat me like a noob if it's not already apparent.
Thanks

What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...

sloosecannon said:
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
Click to expand...
Click to collapse
I followed this video on youtube: youtube.com/watch?v=oDzMQykQ2fA How to Upgrade To And Root Jelly Bean on Droid Razr!
I watched the script run and it kept saying "fail" on several line items and I knew I was in trouble. Unfortunately this was self-induced and I have no desire to go to Verizon for help. I'm not that much of a noob. Anyhow, I'd just like to get back to square one and start over. What I did to get to BP Tools is to hold down volume up, volume down, and power button. Screen shuts off..let those buttons up and press them again which brings me to a second menu. From there I can choose recovery, fastboot, BP Tools, factory reset. The only one that helped was BP Tools which basically sent the phone to a regular boot and it acts normal. If I choose recovery, I get the android dude on his back with a explanantion or question mark, don't recall. If I press volume down, volume up and then release volume up, I can get to the menus where it allows you to run install from disk or something like that. I can't get to the point where I can see my phone on the computer so that I could place a flash file on the phone and re-flash it or something. If any of this sounds remotely familiar to anyone out there, please feel free to add your 2 cents. Thanks!

Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium

skippid said:
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I did try that..sorry should have mentioned it. No dice. Same screen and I got the pleasure of setting the wife's phone up again.
I'm open to suggestions. adb?

ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
Click to expand...
Click to collapse
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...

Thank you sloosecannon. Had some logging in troubles so I appreciate it!

TMYINC said:
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
Click to expand...
Click to collapse
No problem

sloosecannon said:
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Click to expand...
Click to collapse
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.

ce_lloyd said:
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
Click to expand...
Click to collapse
Okay, this worked flawlessly. Thanks so much for the help. Truly amazing pointing this dunce in the right direction! Gnite.

Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2

aichauhan said:
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
Click to expand...
Click to collapse
You need to flash the stock firmware using RSD or House of Moto. This should be posted over at the HD forums, but the process is essentially the same for any Moto device. There's tons of threads about it. Download the software, download the firmware, connect the phone and flash.
Sent from my Blissful RAZR M 5.0.2 from Tapatalk

Flash Failure xt907 droid razr m verizon 4.4.2
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2207419
osk4rin said:
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419

zip folder link is not available anymore
zip folder link is not available anymore
do you have the zip available?
many thanks!
ce_lloyd said:
http://forum.xda-developers.com/showthread.php?t=2207419
Click to expand...
Click to collapse

osk4rin said:
zip folder link is not available anymore
do you have the zip available?
many thanks!
Click to expand...
Click to collapse
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs

Flash Failure xt907 droid razr m verizon 4.4.2
I got this flash failure.
sd_shadow said:
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse

osk4rin said:
I got this flash failure.
Click to expand...
Click to collapse
there is no error on the screen
that is normal fastboot screen for the xt907
device has the latest bootloader only 183.46.15 firmware will work
use the firmware in my RSD lite thread
http://forum.xda-developers.com/showthread.php?t=3184005
[How To][XT907] Flash Firmware with RSD Lite to restore stock firmware/Unbrick (2015)
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
if there was an error, it would be lower on the part of screen, that's not showing
Sent from my KFFOWI using XDA Labs

Can someone help me restore my phone back imei is gone after using restore to stock

I used a restore to stock tool and now my cellular radio doesn't work. I'm pretty decent at trouble shooting. I have tried every thing I know to fix it and it is still broken. I have tried rsd lite to restore it fails when it flashes modem (IMG to large). I have tried flashing stock firmware line for line in fast Boot to no avail. I have tried several custom ROMs I am out of answers so I'm turning it over to you XDA.

Flash your efs backup in twrp.

lafester said:
Flash your efs backup in twrp.
Click to expand...
Click to collapse
I have tried that also when I do it will not boot up. Everything works but cellular data when I try to make a call it says turn airplane mode off and they deffinetly aren't on and in the back ground where the numbers are it says radio off it will not let me turn them on. I even tried in adb with " adb shell put settings global airplane_mode_on 0" it still says turn airplane mode off to make a call.

jonomods said:
I have tried that also when I do it will not boot up. Everything works but cellular data when I try to make a call it says turn airplane mode off and they deffinetly aren't on and in the back ground where the numbers are it says radio off it will not let me turn them on. I even tried in adb with " adb shell put settings global airplane_mode_on 0" it still says turn airplane mode off to make a call.
Click to expand...
Click to collapse
And it won't let me turn the radios on in*#*#info#*#* everything is there like normal when I try to turn them on it does nothing

Reflash the stock radios from the correct image for your device, or reflash the complete stock image via fastboot.
AIO or "one-click" tools are bad news on Moto devices... Avoid them and do it manually, my best guess is something didn't restore properly.
Sent from my Motorola XT1575 using XDA Labs

acejavelin said:
Reflash the stock radios from the correct image for your device, or reflash the complete stock image via fastboot.
AIO or "one-click" tools are bad news on Moto devices... Avoid them and do it manually, my best guess is something didn't restore properly.
Sent from my Motorola XT1575 using XDA Labs
Click to expand...
Click to collapse
Ok thanks I requested firmware straight from Motorola I'll post results

jonomods said:
Ok thanks I requested firmware straight from Motorola I'll post results
Click to expand...
Click to collapse
Good luck with that... Moto is usually less than cooperative.
The firmware images are in the Developer sections here.
Sent from my Motorola XT1575 using XDA Labs

acejavelin said:
Good luck with that... Moto is usually less than cooperative.
The firmware images are in the Developer sections here.
Sent from my Motorola XT1575 using XDA Labs
Click to expand...
Click to collapse
ok thanks man ill try it from here first the one i have been using is from motorola firmware team android file hosting mph24.49-18_4

acejavelin said:
Good luck with that... Moto is usually less than cooperative.
The firmware images are in the Developer sections here.
Sent from my Motorola XT1575 using XDA Labs
Click to expand...
Click to collapse
No, they send you a link upon request. The downloads here are much faster though.

jonomods said:
ok thanks man ill try it from here first the one i have been using is from motorola firmware team android file hosting mph24.49-18_4
Click to expand...
Click to collapse
Ok update i flashed original firmware from xda and the one provided by motorola still nothing. But i have pin pointed sv fuse read failure anyone have any ideas?

Nobody knows? Come on xda I know someone has the knowledge i would be willing to fork up some cash for help to fix it

Well I sent my phone in and within a week I had a replacement within a week. Moto left a 32 and came back 64 gigs.

Unfortunate you couldn't get the help you needed here....

Sporttster said:
Unfortunate you couldn't get the help you needed here....
Click to expand...
Click to collapse
Xda has helped me a lot this I don't think was fixable. I would still recommend someone to seek advice here.

Had the same thing happen to me after flashing back to stock, Baseband Unknown, IMEI Unknown. Found solution in a different Motorola device thread that worked for me.
Flash the modem twice.
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.bin
fastboot erase cache
fastboot reboot

Happened to me a few times. I Just flashed the modem zip floating around around here via twrp. Great score on the 64gb replacement. :highfive:

ATT v20. Cant boot into bootloader..

I have a ATT v20 and ive been trying to root and put TWRP on it but cant seem to get into the bootloader or recovery or download mode.
Tried typing adb reboot bootloader and it just restarts the phone pretty much. Any help would greatly be appreciated.

No bootloader stock. You have to go through this procedure
https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500

I tried too but cant seem to get it to boot into download mode
Sent from my LG-H910 using Tapatalk

@t0xicdr3am What version of the firmware is on your phone? What happens when you have the phone powered off, hold vol up and plug in the USB cable?
-- Brian

The only things I've been able to get it to do is display two barcode thingy screen. I got it into recovery by typing adb reboot recovery and it displays an android guy with an exclamation mark but no options. Tried to upload a screenshot but tapatalk won't let me lol.
Sent from my LG-H910 using Tapatalk

Says software version h91010m..
Sent from my LG-H910 using Tapatalk

Just got mine the other day one the same version.
Phone powered off.
UBB Cable plugged into PC
Vol UP
Insert other end of cable into Phone.

ver2go said:
Just got mine the other day one the same version.
Phone powered off.
UBB Cable plugged into PC
Vol UP
Insert other end of cable into Phone.
Click to expand...
Click to collapse
Ill try that again but pretty sure it didn't work for me. My son's on my PC but he goes to bed soon and then ill try it and report back. Thanks dude.
Sent from my LG-H910 using Tapatalk

Okay so following that tutorial he posted.. I get up to about STEP2.BAT.. Tons of static screens and Im not sure if I messed up my phone for good or not..
My phone has the H915 firmware or whatever from the KDZ.. I dumped my system so Im not sure if that saves me or not?

Also have no cellular signal..
I try following that tutorial to the T but idk what im messing up

Could really use some help guys..
Pretty much stuck on the H915 KDZ I flashed with no cellular.. Following the steps on the H910 tutorial doesnt work.. I get to past Step 1 and either Step 2 messes up or it boots into step 3 and tells me fastboot isnt a valid command or something....

Okay so I got TWRP on it.. but when I try to do anything, its like it doesnt mount system.. I try to flash the system.zip and system.img and i get unable to mount system (unknown error 150)..
Then I go to reboot recovery and it says no OS installed.. So Im assuming when I flashed the system.img it erased the OS?

Now you need to do this part to complete
Now that you are in TWRP you need to do a couple of things:
Click to expand...
Click to collapse

ver2go said:
Now you need to do this part to complete
Click to expand...
Click to collapse
I did.. I flashed the 10m zip and flashed the system.img.. made sure not to get any mount errors..
So it flashed successfully.. rebooted system and it gave me a kernel error im assuming so I held down volume down to restart as it said and now its on the LG screen.. waiting to see if boot time just takes longer or what not and Ill report back..
But shouldnt I have data and cellular? Im on Cricket which is apart of ATT and in his post after flashing the KDZ file.. it says I should but I dont..
At this point I really dont want any root or anything.. I just want to restore my phone to a working state with cellular as I have a young son and use my phone for work and my stupid ass shouldnt of been ****ing with it from the beginning lol.. If I can get back to 10m or stock or whatever and the modem works ill be happy..
I have a full dump from that one step.. Will that help me revert these changes back? How do I go abouts using the DUMP to restore?
Sorry.. never used a dump before.. If it'll even work

Okay so no luck.. maybe TWRP didnt give me an error but when I went to reinstall the files again because i waited 10 mins.. it gave me the unable to mount system unknown error 150.. any ideas?

If you have a Cricket H910 it may be different than an normal H910.
Did you take a dump of your firmware before rooting? It is an optional step, but I hope you did.
-- Brian

runningnak3d said:
If you have a Cricket H910 it may be different than an normal H910.
Did you take a dump of your firmware before rooting? It is an optional step, but I hope you did.
-- Brian
Click to expand...
Click to collapse
I did but have no idea how to restore it using the files it pushed onto my computer.. It isnt a cricket H910.. Its an ATT H910.
Side note, good morning Brian.. Been waiting for you lol

Is there anyway one of you guys can point me into the direction of using the DUMP to restore whatever I can?

ver2go said:
Now you need to do this part to complete
Click to expand...
Click to collapse
When I go to flash the system.zip and .img it erases system completely and then I get the unable to mount system (unknown error 150)
Im pretty sure this all has to do with the encryption.. When I go to format data, it cant mount storage.. When I finally get it to format; and I flash the system.zip and .img i get the unable to mount system..
I dont even want root anymore.. I just want to know how to use my DUMP to fix my phone if its possible?

If it is an AT&T H910 then there is a thread, linked to in the post about rooting that will get you back to stock.
However, I warn you, if you can't make this work, then the chance of you restoring to stock are not good.
I can tell from the posts / PMs that you made, that you didn't read the entire post before trying to root.
You have asked questions that are answered right in the post.
-- Brian