hi all , ill be straight ,i yust get my hands into an atrix 4g , it is unlocked , when triyng to get back from cyanogenmod 7 into stock GB by using the batch script thing , the phone gets stucked at sending system.img step ,just after susscessfully flash boot.img , here comes the ugly part , when i was flashing the phone i fell asleep and didnt notice that flashing process got stucked at system.img , when i woke up , the cmd screen says something about trying to reboot phone , not successfully , too many lines (something like that) when i tried to boot it actually boot into fastboot mode , but when i try to get into moto-fastboot it says that battery is too low for flashing , i've triyed to charge it , but still it says that batt is too low , what can i do ? is anyway to get the phone to work ? please help me , i was looking if anyone got the same issue i have but with no luck
sent form the gray stuff inside my skull
This belongs to Q&A.
Maybe try with an external charger.
Sent from my MB860 using xda app-developers app
demonoid phenomenom said:
hi all , ill be straight ,i yust get my hands into an atrix 4g , it is unlocked , when triyng to get back from cyanogenmod 7 into stock GB by using the batch script thing , the phone gets stucked at sending system.img step ,just after susscessfully flash boot.img , here comes the ugly part , when i was flashing the phone i fell asleep and didnt notice that flashing process got stucked at system.img , when i woke up , the cmd screen says something about trying to reboot phone , not successfully , too many lines (something like that) when i tried to boot it actually boot into fastboot mode , but when i try to get into moto-fastboot it says that battery is too low for flashing , i've triyed to charge it , but still it says that batt is too low , what can i do ? is anyway to get the phone to work ? please help me , i was looking if anyone got the same issue i have but with no luck
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
Hey while back this happened to me, I actually went to a friends house he had a droid x they use the same battery pretty much I take the battery out of the atrix and put it in the Droid X and you got to charge then plug it back into the atrix and flashed. It was enough to charge it. But before I went to his house I have went to the Verizon store they had a droid x it was a non corporate store they were nice enough to let me charge my battery inside of a Droid X for 30 minutes
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
actually thats a problem that alot of people have when using rds its just that the battery run out and the phone cant chrage it beacuse it cant boot so.
1.- you can buy or make youre factory cable to be able to charge in rds mode.
2.- buy a battery charger.
3.- use this method by berbedesz user
Today I have encountered the same problem. Yet, I found far easier way to recharge the battery. Just take any USB cable and cut it like below. Then attach the red wire to + marked on Atrix battery and black one to - with scotch tape (I used masking tape for painting as it leaves no glue)> plug into your motorola recharger or PC and give it some time.
Click to expand...
Click to collapse
thx for the quick answers ill try to buy a battery recharger , for the flashing issue (triyed twice before battery dryed out ) , is it whorth the risk to flash via rsdlite ? i mean since the phone failed to do so via batch ? ( ill get the thread link when i get to my home )
sent form the gray stuff inside my skull
demonoid phenomenom said:
thx for the quick answers ill try to buy a battery recharger , for the flashing issue (triyed twice before battery dryed out ) , is it whorth the risk to flash via rsdlite ? i mean since the phone failed to do so via batch ? ( ill get the thread link when i get to my home )
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
i never try the fasboot method i always use rds and never had a problem
lucamibel said:
i never try the fasboot method i always use rds and never had a problem
Click to expand...
Click to collapse
somewhere i readed that flashing GB from almost any custom rom could hardbrick my atrix , but since kernel got flashed and have no system installed ........ i guess its ok , or maybe im just prooving what a noob i am xd
sent form the gray stuff inside my skull
demonoid phenomenom said:
somewhere i readed that flashing GB from almost any custom rom could hardbrick my atrix , but since kernel got flashed and have no system installed ........ i guess its ok , or maybe im just prooving what a noob i am xd
sent form the gray stuff inside my skull
Click to expand...
Click to collapse
Well, potentially anything to do with RSD could hardbrick your Atrix. Just make sure to read all the guides thoroughly, and then read it again for safe measure . Also, make sure to select the proper firmware for your country specific device.
I'd cut a spare usb cable and charge up the battery first, regardless of how you intend to flash the phone. (Assuming you can't be bothered buying a separate battery charger.)
Sent from my MB860 using Tapatalk 2
Related
ok it says download kdz drivers and euro open ive done that i dont get a exe file i gt a rar file a bunch of txt and bs how do i change this i reli wana mod this phone i needa put it on froyo at 800mhz thats what my m8s done and its wicked help please as he lives ages away and i wana do this myself
Danzano said:
ok it says download kdz drivers and euro open ive done that i dont get a exe file i gt a rar file a bunch of txt and bs how do i change this i reli wana mod this phone i needa put it on froyo at 800mhz thats what my m8s done and its wicked help please as he lives ages away and i wana do this myself
Click to expand...
Click to collapse
Take a look at this post on MoDaCo, it tells you how to install Froyo:
http://android.modaco.com/content/l...id-2-2-on-your-phone-for-total-newbs-like-me/
And to overclock your phone: Download SetCPU from here: http://forum.xda-developers.com/attachment.php?attachmentid=585838&d=1304459242, Install it, and open it. Press "AutoDetect Speeds" Allow the superuser request and set the top bar to 806MHz.
Hope it helps,
Jack
Danzano said:
ok it says download kdz drivers and euro open ive done that i dont get a exe file i gt a rar file a bunch of txt and bs how do i change this i reli wana mod this phone i needa put it on froyo at 800mhz thats what my m8s done and its wicked help please as he lives ages away and i wana do this myself
Click to expand...
Click to collapse
And please write normal english.
Joost
ok upgraded to fastboot then to cyangen mod 7 it loads the first part with swift droid second part wont load its stuck on that screen is it bricked what do i do
Danzano said:
ok upgraded to fastboot then to cyangen mod 7 it loads the first part with swift droid second part wont load its stuck on that screen is it bricked what do i do
Click to expand...
Click to collapse
Have you tried fastboot -w to factory reset. Also did you put clockworkmod recovery on it?
code:
fastboot flash recovery recovery.img
You could also try re-flashing and making sure everything is right.
Sent from my Acer Aspire One D255 Netbook with dual-boot Android 2.1 - Rooted
^ I do have a GT540, I'm just using my netbook
Danzano said:
ok upgraded to fastboot then to cyangen mod 7 it loads the first part with swift droid second part wont load its stuck on that screen is it bricked what do i do
Click to expand...
Click to collapse
Please understand the correct definition of brick. Brick means that the device will not function AT ALL. (Eg. Wont turn on, Has no fuction) You forgot to do a factory reset. Go back into fastboot and do fastboot -w (like said above) Your phone will boot.
Jack
Had to repeat the steps 2 3 times but all good now was running 2.2 and it was when i went to the cyanogen mod 7 things went funny but it seems to work good now and more stable i think than open swift loving the xda website ive learnt more in my time on this site then i ever did in college
Does anyone know the max stable cpu overclock??????? im running 825mhz seems sweet but wouldnt mind abit more grunt for games etc plus its cool to laugh at people that paid twice as much for there phone and yours out performs and is just generally better
This Thread Is For Them Who Bricked There Phones
Don't start a new thread for your bricked phone & post here.
We will help you with every possible solutions.
Here are some quick tips :
(Here I'll use the terms like Download-Mode & Recovery-Mode, If you dont know what are they please click here. There "BOOT to RECOVERY" & "BOOT to BOOTLOADER" means how to enter into Recovery-Mode & Download-Mode respectively.)
A Bricked Phone May Have One or More (Below Problems) :
1. Booting to the ROM(Android) not possible.
2. Booting to the Recovery-Mode not possible.
3. Black screen or Bootloop(Repeated Restarting of Phone at Boot Animation or Samsung Galaxy Y Logo).
Possible Solutions :
(Remember there'll be data loss using these solutions so always try to keep a backup)
1. If you can still enter into Recovery-Mode
(a). Try to clear Data & Cache then check.
(b). Try Installing a Custom ROM using CWM(ClockWorkMod Recovery) & check.
(For Custom ROM & CWM Visit here.)
2. If Recovery-Mode didn't helped Enter into Download-Mode & flash an odin supported stock rom(using ODIN 1.84 or 1.85) from Doky73's Thread(Flashing Guide in 2nd post).
*You can inform me, if anything left out.
Note :
1. I'll be not held responsible for anything that happens to your phone.
2. Before posting try to search for similar type problems out there & try the solution, if that doesn't solve your problem then post here.
Make this a sticky.. there are many users who say that their phone is bricked
help! bricked SGY
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
jmpotter said:
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
Click to expand...
Click to collapse
can you go to download mode??
(try pressing volume down+ home button + power button all at the same time)
if it still can, then your SGY is still good
go to this ---> thread
and just flash your country's firmware
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Millan.SIS said:
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
static28 said:
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
Click to expand...
Click to collapse
ya, that's what those wannabees really do..
Sent from my GT-S5360 using Tapatalk 2
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
kurotsugi said:
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
Click to expand...
Click to collapse
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky73. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
edit: I didn't to offend him but I think I've mispelled doky's username. edited.
manoranjan2050 said:
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
whatever It may be... You should never mess up with bootloaders, if you don't actually know what's there significance...
Brief description on android starting process :
pbl(primary boot loader "boot.bin") executes first and then it executes sbl ...
Sbl(secondary boot loader "sbl.bin") is responsible for responding to combos...download mode.. Intercepting odin commands..... booting system...booting kernel.... Charging your battery while switch off... Etc etc
Harm anyone of them... And Your phone goes into lifetime hibernation, Hard-bricked.
Sent from my GT-S5360 using Tapatalk 2
thanks for the big info friend...... so hard bricl is mot repairble ......
Sent from my GT-S6102 using xda premium
my device might be bricked, can you please help me out
Hi to all, it's only my second post but i have a major problem with my samsung s-5360. it's won't boot anymore, but it can enter cmw and recovery. This is what i did wrong i believe. At first i installed morocs 1.8 kernel on creed fusion version 3.1 and it wouldn't boot anymore, so i ended up using a back-up i made before with cmw. And it worked well and phone was booting again and was on stock again. ( because back-up was made with stock-version obviously )
Then i thought: well let's try repensis noob version. And installed it and there was also an update 2 and installed it over it as well before booting the os, maybe this is what i did wrong dunno .. But afterwards it didn't boot anymore and whatever i tried, restoring one of the 3 images i made, or using one of the roms posted here like Creed fusion 3.1 rom or Aurora 2 nor Chobits didn't work.
I also tried reverting to stock with odin 1.85 but when i connected my phone via usb to the pc, odin didn't see my phone. ( after selecting the 3 tar files in odin ) Maybe i'm doing wrong something there.
What i also have to add is that when doing factory wipe in recovery it says formatted E: but unable to format E:\dev10 and dev11. clearing cache is no problem and also cleared dalvik cache. Can you please help me out ? I know, it sounds very noobish but well, i have to face it because can't do it myself without help anymore it seems ... Thanx a lot in advance.
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Thanx a lot for responding ! I only used kies for connecting my phone because i couldn't find a driver for it, and had to disconnect it, but i will search for it again now and hopefully it will work now. i have to go now and return back in three hours. i'm very curious ! i'll come back in a couple of hours and gonna tell if it worked out of course
kurotsugi said:
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky77. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
Click to expand...
Click to collapse
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Doky73 said:
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Click to expand...
Click to collapse
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
ops...my mistake. I guess I'm too sleepy when was typing your name. I'll edit it. sorry.
manoranjan2050 said:
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
Click to expand...
Click to collapse
if u flash something through odin or cwm then you wouldnt hard brick ur phone.. it would be just a temporary brick which can be easily revived... i dont know abt that partioning thing
Sent from my GT-S5360 using XDA
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
---------- Post added at 02:35 AM ---------- Previous post was at 01:47 AM ----------
mickeyindahouse said:
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
Click to expand...
Click to collapse
Well after trying this proces for the 5th time i finally managed to go to stock rom and it only lasted a couple of minutes Of course thanx to doky73 who made all this possible ! So i unbricked it for the second time i guess
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Hiya, can u tell us how u updated the firmware to 2.2...
Sent from my MB525 using XDA
Hi i think i installed it through the motorola software/update?? when i plugged in the usb & phone it installed the motorola drivers then said there is an update for the phone
saffa1 said:
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Click to expand...
Click to collapse
Bad update, flash a froyo sbf from here: http://forum.xda-developers.com/showthread.php?t=966537
I recommend you stay on froyo so you can install CM7 too
If this doesn't fix it (make sure its right sbf for your type of defy) Then its probably a radio fault that needs repair, but as it worked before it should be fine, its just a bad update, hope this helps
Sent from the real world by hacking into the matrix
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
That's strange I never got any Spanish instructions :O try the latest version from the thread I provided, and read this noob guide http://forum.xda-developers.com/showthread.php?t=1216982 Thanks to these two threads I did what I thought was impossible, flashed froyo and then CM7 on the same day, its not as hard as it seems just follow steps carefully and its easy! Any more questions feel free to ask, you don't need to send your phone learn it yourself its worth it
Sent from the real world by hacking into the matrix
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
saffa1 said:
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
Click to expand...
Click to collapse
Can you explain this in detail so I can try and help you?
Sent from the real world by hacking into the matrix
Questions go in the Q&A section
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
So, your phone is simlocked and when you flashed a different SBF, you have deleted the files that have (probably) previously been installed to unlock it. There are some custom ROM's out there that can simunlock Defy (one of them is MS2Ginger4.0). If you don't know what you're doing and can not handle it yourself, I could flash a custom, simunlocking ROM for you if you don't mind shipping it to Bulgaria and back (I assume you are in the UK).
P.S. There is also a chance that your sim card slot is busted and it can't read the SIM card.
am from uk i can explain or help u over the phone
ibtihaaz said:
am from uk i can explain or help u over the phone
Click to expand...
Click to collapse
I'm not good over the phone, plus my mic is a bit screwed, I'll try write a simple noob guide one day I'm free
Sent from the real world by hacking into the matrix
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
If you flashed a froyo SBF last, you must flash at this time also a froyo SBF.
The Flash of an eclair SBF will end in a black screen, cause froyo SBF are CG4 (Bootloader 4) and eclair SBF are CG3 (Bootloader 3).
The Bootloader must be equal or higher then the last SBF you flashed.
Try this SBF:
http://sbf.droid-developers.org/umt...RYOTMGB_P023_A011_M003_HWp3_Service1FF.sbf.gz
its the tmobile froyo SBF Britain.
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
You WHAT!? Are you sure it didn't just go flat after flashing? My defy can be quite stubborn to boot if it goes dead, general rule is if rsdlite can still recognise it flashing it again should sort it out
Sent from the real world by hacking into the matrix
There's a few things you can try here, don't bin it its almost impossible to brick a defy completely: http://forum.xda-developers.com/showthread.php?t=978140
Sent from the real world by hacking into the matrix
All i have is a black screen with white led and that's only if i plug it in the usb
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
This guy is the best, listen to him he helped me improve my mic problem
Sent from the real world by hacking into the matrix
Auris 1.6 vvt-i said:
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
Click to expand...
Click to collapse
Hi i cant get it into boot-loader i have tried but its just dead
i can get teamviewer but i dont have a web cam
A homeless guy I trust down at the park gave me a white RAZR M.Told me it was good,but he was taking an upgrade.So,I get it home and plug it into the charger,and I get a strange screen.It won't boot up.When I went back to where he had his shopping cart and stuff,he said that he might have screwed it up when he tried to wipe his info off the phone,but I'm not sure how he did it.He told me it was on PagePLus,which is the carrier I have.Page Plus phones need to be flashed onto their network,if they are 4g,like the RAZR M.
So,I would like to get this phone to boot up,what should I try? I am not sure if it is totally bricked or not.This is what it looks like.It says:
AP Fastboot Flash Mode (S)
10.9B(*)(sha-1e91557,2013-05-29 13:50:43)
eWC info:Size 8gb
Device is LOCKED.Status Code:0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason:Flash Failure
This story seems legit...
RikRong said:
This story seems legit...
Click to expand...
Click to collapse
Yes,that is an actual photo I took of the phone screen.
No offense and I could be wrong but I would think most homeless dont maintain a cell phone plan.
Sent from my SCH-I545 using Tapatalk
Maduro78 said:
No offense and I could be wrong but I would think most homeless dont maintain a cell phone plan.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
People make their choices,I don't judge,we been buds since I gave him half a bottle of blackberry brandy I had kicking around.
Larry told me that it was running 98.15.66 before he tried to wipe it.
Using RSD lite to flash stock firmware to get the phone working again is a good place to start. not sure how to go about flashing page plus.
http://forum.xda-developers.com/showthread.php?t=2250155
PantherVT said:
Using RSD lite to flash stock firmware to get the phone working again is a good place to start. not sure how to go about flashing page plus.
http://forum.xda-developers.com/showthread.php?t=2250155
Click to expand...
Click to collapse
Thanks for that,I will give it a shot later on.
This is how to flash it to PagePlus.
http://www.howardforums.com/showthr...ellyBean-on-PagePlus-VOICE-SMS-MMS-3G-WORKING
If you don't want to mess with having to re-flash the ICS modem and all that, you could try just flashing the logo to kick it out of fastboot mode. Get the original logo.bin from someplace and on your PC, type:
fastboot flash logo logo.bin
If the phone doesn't boot up normally after that, you'll have to reflash the whole thing using RSDLite and redo the entire PagePlus flashing process.
Or just use it on T-Mobile and have better data!
SeNT FRoM My MoToRoLA RaZR M XT907 oN T-MoBiLe
Hey everyone this is mine first thread so yeah plz forgive me if I accedently broke any rules
So if Ur having problems like Ur device keeps on restarting and freezing or getting stuck or not booting maybe it's an sign of infamous emmc chip failing but thiers an temprory fix for it just follow the following steps again not 100% sure if it will work but there's still hope
Note: this won't work if u tinkered with Ur boot.img or Android system that's an software issue reflash the original stock rom via Odin and Ur good to go .
STEPS:
1. Power off Ur device
2. Remove all the accessories like SIM cards memory card battery and all.
3 wrap the phone with no accessories on an polithin or any thing which doesn't allow vapour or water get in ... Can't have Ur phone wet right ...
4 now put the phone wrapped inside polithin of paper or whatever inside refrigerator for upto 3 minutes
5 now after 5 min take the phone out of refrigerator and then undo the wrapping .
6 let it dry
7 try booting it by inserting only battery don't put Ur SIM cards yet ....
8 does it boot ? If yes congrats ? if no ? Try other threads on Xda maybe they can help
Thnxx for reading ..?
1000000000000000000000 x Thanks
really this method worked.
I waited 30 minutes in the fridge
gudi said:
1000000000000000000000 x Thanks
really this method worked.
I waited 30 minutes in the fridge
Click to expand...
Click to collapse
Ha ha glad to help XD...
gudi said:
1000000000000000000000 x Thanks
really this method worked.
I waited 30 minutes in the fridge
Click to expand...
Click to collapse
Can you tell me from where you downloaded files for odin?
İt has been a long time and I have vorgotten.
but look here
https://www.google.de/amp/s/forum.x...-fix-tried-sm-n910g-sm-n910p-sm-t3468721/amp/
fahadsaghir287 said:
Can you tell me from where you downloaded files for odin?
Click to expand...
Click to collapse
Well here's the site I have been using for downloading firmware it works pretty well
https://updato.com/firmware-archive-select-model
Just put Ur devices model number and poof latest firmware :laugh:
Here is a 100% hardware fix for this issue that anyone can do with no tools or special equipment.
It really works. Give it a try. ?
https://youtu.be/jLPHWtb0StI
Here is a 100% hardware fix for this issue that anyone can do with no tools or specia
Here is a 100% hardware fix for this issue that anyone can do with no tools or special equipment.
It really works. Give it a try. ?
https://youtu.be/jLPHWtb0StI