I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
So did you ever root?
Sent from my Galaxy Nexus using xda premium
skippid said:
So did you ever root?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No. I'd like to eventually but right now, I need to make that fastboot lock screen go away. Please treat me like a noob if it's not already apparent.
Thanks
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
sloosecannon said:
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
Click to expand...
Click to collapse
I followed this video on youtube: youtube.com/watch?v=oDzMQykQ2fA How to Upgrade To And Root Jelly Bean on Droid Razr!
I watched the script run and it kept saying "fail" on several line items and I knew I was in trouble. Unfortunately this was self-induced and I have no desire to go to Verizon for help. I'm not that much of a noob. Anyhow, I'd just like to get back to square one and start over. What I did to get to BP Tools is to hold down volume up, volume down, and power button. Screen shuts off..let those buttons up and press them again which brings me to a second menu. From there I can choose recovery, fastboot, BP Tools, factory reset. The only one that helped was BP Tools which basically sent the phone to a regular boot and it acts normal. If I choose recovery, I get the android dude on his back with a explanantion or question mark, don't recall. If I press volume down, volume up and then release volume up, I can get to the menus where it allows you to run install from disk or something like that. I can't get to the point where I can see my phone on the computer so that I could place a flash file on the phone and re-flash it or something. If any of this sounds remotely familiar to anyone out there, please feel free to add your 2 cents. Thanks!
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
skippid said:
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I did try that..sorry should have mentioned it. No dice. Same screen and I got the pleasure of setting the wife's phone up again.
I'm open to suggestions. adb?
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
Click to expand...
Click to collapse
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
TMYINC said:
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
Click to expand...
Click to collapse
No problem
sloosecannon said:
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Click to expand...
Click to collapse
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
ce_lloyd said:
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
Click to expand...
Click to collapse
Okay, this worked flawlessly. Thanks so much for the help. Truly amazing pointing this dunce in the right direction! Gnite.
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
aichauhan said:
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
Click to expand...
Click to collapse
You need to flash the stock firmware using RSD or House of Moto. This should be posted over at the HD forums, but the process is essentially the same for any Moto device. There's tons of threads about it. Download the software, download the firmware, connect the phone and flash.
Sent from my Blissful RAZR M 5.0.2 from Tapatalk
Flash Failure xt907 droid razr m verizon 4.4.2
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419
osk4rin said:
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419
zip folder link is not available anymore
zip folder link is not available anymore
do you have the zip available?
many thanks!
ce_lloyd said:
http://forum.xda-developers.com/showthread.php?t=2207419
Click to expand...
Click to collapse
osk4rin said:
zip folder link is not available anymore
do you have the zip available?
many thanks!
Click to expand...
Click to collapse
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Flash Failure xt907 droid razr m verizon 4.4.2
I got this flash failure.
sd_shadow said:
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
osk4rin said:
I got this flash failure.
Click to expand...
Click to collapse
there is no error on the screen
that is normal fastboot screen for the xt907
device has the latest bootloader only 183.46.15 firmware will work
use the firmware in my RSD lite thread
http://forum.xda-developers.com/showthread.php?t=3184005
[How To][XT907] Flash Firmware with RSD Lite to restore stock firmware/Unbrick (2015)
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
if there was an error, it would be lower on the part of screen, that's not showing
Sent from my KFFOWI using XDA Labs
Related
Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
iSleek said:
Hello! Not sure how this happened. Last night, my girl turned off her Razr M phone and went to sleep. This morning, she tried to turn it on and it was stuck on the "Motorola" logo. After a while, it said that it failed to boot and gave an error. Sent me straight to AP Fastboot mode.
I started researching and somehow the phone is now bricked.
So, my research took me to download RSD Lite and I tried downloading various ROMs and stuff - I'm really new at doing this with Android so bare with me
The latest thing I tried is the PacMan ROM, but RSD Lite gives me the error: "Please check input file. Eithe rxml format is wrong or image files associated with it are missing."
I read somewhere that it's not necessary to use RSD Lite for ROMs, the thing is I can't access my SD card. I don't have a way of getting anything in or out of it. No other devices.
What can I do at this point? I am willing to try anything to get it working again.
Thanks so much for taking the time to read this
Click to expand...
Click to collapse
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Thanks so much for your reply Downloading and trying right now! Will update soon!
crazy4android said:
to use a custom rom (PAC Man) you need unlocked bootloader and custom recovery....but if you want to return to factory look at this http://www.andromods.com/tips-trick...oid-razr-m-xt907-stock-original-firmware.html its the easiest method i could find that would help you...heres the firmware to flash with rsd lite.... http://sbf.droid-developers.org/phone.php?device=8 .."Android 4.4.2
Blur_Version.183.46.10.XT907.Verizon.en.US" is the one you want.. hope you get it....
---------- Post added at 12:29 PM ---------- Previous post was at 12:23 PM ----------
and heres a great thread of how to unlock bootloader and install roms and stuff....If you up for it...http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
I've heard of the error before from other threas but i dont recall what the problem was...did you install the motorola drivers? I really dnon't know what it could be..I've nevr had any trouble with it and i've done it a couple of times..
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
iSleek said:
It gives me this error message: "Failed flashing process. 1/18 flash partition "gpt.bin" Phone returned FAIL"
I'm downloading an earlier version of the OS to see what happens.. any other ideas?
Click to expand...
Click to collapse
Open the xml inside the zip you're flashing and remove the line:
Code:
<step operation="flash" partition="partition" filename="gpt.bin" MD5="5B3FD782141145E4BD1C9270D954AFF1" />
Yeah modifying the xml file is necessary, but also make sure your phone is charged above 50 percent. Low battery causes some funky errors with RSD.
Also what version of android were you running? I'd try flashing the new stock KK with RSD to at least get it up and running....then worry about flashing a custom.
The good thing is if you're getting into fastboot, you're not hard bricked and it's salvageable with some work!
Sent from my DROID RAZR M using XDA Free mobile app
Is your boot loader unlocked?
Sent from my XT907 using XDA Free mobile app
Hi,
To answer all the questions:
1- Is your boot loader unlocked? No
2- I've modified the XML file and removed the lines I was advised to remove.
3- Not sure what exact version of Android the device was running, as it's not mine. Also, what is "stock KK"???
4- ezknives, I've read through the post and basically the guy removed lines from the XML file - did that, also uninstalled Moto stuff and installed Motocast. No joy.
Right now, RSD shows the error message "Failed flashing process. 1/16 flash sbl1 "sbl1.mbn" -> Phone returned FAIL."
I am using the 4.4.2 firmware found here: http://sbf.droid-developers.org/phone.php?device=8
Other ideas?
One more bit of info. The eBay seller reports the phone had "Android 4.0.4 Ice Cream Sandwich" installed when she purchased it. Not sure if she updated it or not, but I don't think so. Does this new information change anything?
EDIT: I downloaded and tried out the 4.0.4 version from http://sbf.droid-developers.org/phone.php?device=8 but it stops at the same steps, even after editing out the XML file.
Also tried the utility found here: http://forum.xda-developers.com/showthread.php?t=2207419&page=2 (the latest version).. seems that it does some work but the device still doesn't respond. Gets stuck at Android logo.. and I've tried RSD with all I have (4.0.4 and newwer) but no luck.
OK so.. somehow I managed to flash the stock 4.4.2 version after many tries - using RSD.. it now boots but only to a frozen "M" logo.. and keeps cycling back to it.. any ideas?
ezknives said:
This guy had the same error read through that post.
Click to expand...
Click to collapse
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
iSleek said:
Hi, I was able to flash - or so it seems - 4.4.2 but it gets stuck in a loop (motorola logo, turns off, goes back).. unless i put it back in fastboot.
Will unlocking the bootloader help me? I am trying to get Motorola to give me the code/help me with this, as my device does not have USB debugging turned on. But before I continue "fighting" to get the code, I want to make sure i can use it for something. Can you advise me?
Thanks!!!
Click to expand...
Click to collapse
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
ezknives said:
This guy had the same error read through that post
We cannot teach people anything; we can only help them discover it within themselves.
Click to expand...
Click to collapse
ATTACK said:
Re-flash 4.4.2 with RSD Lite one more time. I've read that running it (RSD Lite) twice will help to fix the bootloop issue. As far as unlocking your bootloader, Motorola will not give you a code if you do not own a developer model. You'll need to use Motopocalypse to unlock.
> http://forum.xda-developers.com/droid-razr-m/general/guide-faq-how-to-root-boot-unlock-t2869432
Click to expand...
Click to collapse
This would be the 4th time successfully flashing 4.4.2 with RSD Lite, but I will do it just to see what happens. About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
iSleek said:
About unlocking the bootloader.. it's still not clear to me what I will gain if I can get it unlocked.. Can you enlighten me? Thanks!
Click to expand...
Click to collapse
Head to the link I posted and read the FAQ section.
Black screen no startup no download mode and no recovery. When i plug the usb cable into the pc i get QHSUSB_BULK. Can someone with a NON dev edition version please run the unbrick image creator from safestrap and send it to me or link it?
Nit3H8wk said:
Black screen no startup no download mode and no recovery. When i plug the usb cable into the pc i get QHSUSB_BULK. Can someone with a NON dev edition version please run the unbrick image creator from safestrap and send it to me or link it?
Click to expand...
Click to collapse
unbrick image creator? have you tried odin and a stock tar file?
Sent from my SM-G900V using XDA Free mobile app
G900V
elliwigy said:
unbrick image creator? have you tried odin and a stock tar file?
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
The phone won't boot at all it is a hard brick not a soft brick. I need someone with a G900V to run the unbrick image creator from safestrap so i can DD it to the SD card which will make the phone boot into download mode with the usual volume down + home + power so i can actually flash stock with odin.
h ttps://www.androidfilehost.com/?fid=%2023578570567721355
I am trying to use this unbrick method but i need a unbrick.img
h ttp://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4
--
Nit3H8wk said:
The phone won't boot at all it is a hard brick not a soft brick. I need someone with a G900V to run the unbrick image creator from safestrap so i can DD it to the SD card which will make the phone boot into download mode with the usual volume down + home + power so i can actually flash stock with odin.
h ttps://www.androidfilehost.com/?fid=%2023578570567721355
I am trying to use this unbrick method but i need a unbrick.img
h ttp://www.rom-central.com/showthread.php?87-GUIDE-HOWTO-Recover-from-a-HARD-BRICK-N900V-NC2-NC4
Click to expand...
Click to collapse
Curious as to if this works or not. Could you be so kind to report back afterwards?
--
Unbrick
warpedmind0u812 said:
Curious as to if this works or not. Could you be so kind to report back afterwards?
Click to expand...
Click to collapse
Yes it worked was able to boot into download mode from the sd card and flash stock odin.
Nit3H8wk said:
Yes it worked was able to boot into download mode from the sd card and flash stock odin.
Click to expand...
Click to collapse
thats awesome news! i never heard of this method! great find!
Sent from my SM-G900V using XDA Free mobile app
Nit3H8wk said:
Yes it worked was able to boot into download mode from the sd card and flash stock odin.
Click to expand...
Click to collapse
Hello,
Can you please help ? i have a hard brick S5 Verizon. can you pm me ?
Thanks
similar situation?
I can get into recovery and download on my sm-g900v going into recovery it says insalling system update then no command. I have wipe data/factory reset or wipe cache partition as far as wipes go. I got here by removing a bunch of KNOX stuff, then I got stuck on the boot screen and cant get any further. Been trying mixes of stuff on Odin to no avail.
"android system recovery <3e> KTU8P.G900VVRU1ANI2"
Really could use some advice.
Thanks all.
I may be stealing my self a new phone lol.
--
link to guide is dead... i need help
http://forum.xda-developers.com/verizon-galaxy-note-3/general/howto-recover-hard-brick-t2834419
If the op could please shine some light thatd be great! Tell us what you did exactly?
As for the dead link the above link is the guide, same one op had posted not for galaxy s5,
I myself am still trying this so far used sandisk 16gb formated every way possible with file downloaded from above,dont have time to try my other omes yet,if you can get it to work PLEASE post brand and size of sd card you used.
thoatih12 said:
http://forum.xda-developers.com/verizon-galaxy-note-3/general/howto-recover-hard-brick-t2834419
If the op could please shine some light thatd be great! Tell us what you did exactly?
As for the dead link the above link is the guide, same one op had posted not for galaxy s5,
I myself am still trying this so far used sandisk 16gb formated every way possible with file downloaded from above,dont have time to try my other omes yet,if you can get it to work PLEASE post brand and size of sd card you used.
Click to expand...
Click to collapse
Did you ever get this to work? Because I am about to try... Also can you send link of the unbrick.img you are using because the one in here is not working for me.
--
Misterxtc said:
It's at the top of this page and all that I have available. As I said before I have never done this and can not help anymore than I have. Sorry.
Click to expand...
Click to collapse
Okay thanks
The method never worked for me, I found out if your computer does not recognize your phone via USB before you attempt this method it will never work, my phone would not come up at all when connected to my USB port. I ended up contacting Verizon and sent my phone back, told them it died on new update, it's been 2 weeks haven't heard from them.
Nit3H8wk said:
Black screen no startup no download mode and no recovery. When i plug the usb cable into the pc i get QHSUSB_BULK. Can someone with a NON dev edition version please run the unbrick image creator from safestrap and send it to me or link it?
Click to expand...
Click to collapse
How did you brick your phone? I know it sounds weird but I'm looking to really mess up the bootloader on mine without simply triggering kies and having it lock up my phone. I figure if I can brick the phone then use an insecure debrick image I may be able to flash an unlocked bootloader to it without having to use JTAG and everything.
elliwigy said:
thats awesome news! i never heard of this method! great find!
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Same as the galaxy s3 LTE variants, and so long as this works then there is hope to unlock the bootloader. I'm so excited this works here! :fingers-crossed::good:
Nit3H8wk said:
Black screen no startup no download mode and no recovery. When i plug the usb cable into the pc i get QHSUSB_BULK. Can someone with a NON dev edition version please run the unbrick image creator from safestrap and send it to me or link it?
Click to expand...
Click to collapse
How did you brick your phone? Tell me the steps, please. I can't fr***ing figure out how to brick it.
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this:
Download a flashable custom rom, put the rom *.zip file in the same folder with ADB.
Go into recovery TWRP, connect your phone to your computer.
Push rom *.zip file to your phone's internal storage with this command in ADB:
push [file.zip] /sdcard/.
Then flash that rom file with TWRP.
Well, sir, how can I get into TWRP? I can't even droidboot... My recovery that I flashed was stock
deleted.
kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
tank4k said:
can u open droid boot?
Click to expand...
Click to collapse
No
paktepu said:
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Click to expand...
Click to collapse
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
kelvinvalencio said:
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
Click to expand...
Click to collapse
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
kelvinvalencio said:
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
Click to expand...
Click to collapse
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I followed the Debrick one. The problem comes when I ran Debrick.dat, from the Cloverview mode (Press vol down and connect to pc). While the Debrick program runs, the phone "boots". Shows up USB logo and it goes red. Few seconds after then, the program closes, leaves the phone on red USB logo. Is this something normal?
Btw that link can't help.
Sent from my EG680 using XDA-Developers mobile app
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
---------- Post added at 09:07 PM ---------- Previous post was at 09:03 PM ----------
DogeLordTR said:
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
Click to expand...
Click to collapse
OK, I'm really stupid, sorry for time waste.
paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I have contacted Shakalaca and until today I have not retrieved any reply. This problem haven't been solved. Any idea? I see you know a lot about this, and you're very popular arround here.
This happened with my Asus Zenfone 5 (T00j). Tried every solution available on net without sucess, finally took it to Service Center and they had to replace the motherboard
I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?
le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.
ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk
le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.
ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk
There's been 10 downloads yet no one has come back with any reports?
ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either
le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?
ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk
le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.
i have the AQA3 as well, which files should i use first to help with this?
rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?
youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results
is there a twrp recovery floating around? thx in advance
Sent from my Pixel 2 XL
I'm In the row, I hope soon we'll be able to root this tablet!
---------- Post added at 10:21 AM ---------- Previous post was at 09:52 AM ----------
By the way, have you unlocked the bootloader yet?
---------- Post added at 10:36 AM ---------- Previous post was at 10:21 AM ----------
Check this out:
https://twrpbuilder.github.io/downloads/twrp/#220
I unlocked the boot loader already. I haven't tried to install the recovery shown in the previous link, because I haven't been able to back up my entire firmware first. Can any one confirm it works, please.
There is a chance the file belongs to a different unit. Its name doesn't suggest anything related to our tablet model.
Being able to find a recovery for our tablet is like finding a needle in the haystack. Finding a ROM is like finding a threaded needle in the haystack. That makes me think why should I root my tablet.:crying:
freddienuxx said:
is there a twrp recovery floating around? thx in advance
Sent from my Pixel 2 XL
Click to expand...
Click to collapse
It seems we have the same problem. Not being able to install twrp in our lenovo tb-x704v yet. I dont give up yet. Would you let me know if you finally manage to do it, and how you did it?. Please. I will do the same. Thanks.
I will
luisnica98 said:
It seems we have the same problem. Not being able to install twrp in our lenovo tb-x704v yet. I dont give up yet. Would you let me know if you finally manage to do it, and how you did it?. Please. I will do the same. Thanks.
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
freddienuxx said:
I will
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
I have it working perfectly on my TB-X704v, all I did was flash the version for the TB-X704L/F (10.1 inch plus) from here:-
https://forum.xda-developers.com/thinkpad-tablet/general/twrp-root-tab-4-plus-tb-x704l-f-tb-t3664407
Important to make sure you boot to TWRP after flashing and not allow the system to boot as this will overwrite your TWRP.
Do you mean physically boot into twrp after flashing?
Sparkrite said:
I have it working perfectly on my TB-X704v, all I did was flash the version for the TB-X704L/F (10.1 inch plus) from here:-
https://forum.xda-developers.com/thinkpad-tablet/general/twrp-root-tab-4-plus-tb-x704l-f-tb-t3664407
Important to make sure you boot to TWRP after flashing and not allow the system to boot as this will overwrite your TWRP.
Click to expand...
Click to collapse
Sent from my Pixel 2 XL using Tapatalk
freddienuxx said:
Do you mean physically boot into twrp after flashing?
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
Yes, and what I do is issue the command fastboot reboot while pressing and keeping pressed Vol+, as soon as tablet reacts to command disconnect the USB lead.
Sparkrite said:
Yes, and what I do is issue the command fastboot reboot while pressing and keeping pressed Vol+, as soon as tablet reacts to command disconnect the USB lead.
Click to expand...
Click to collapse
ok will try. thx a bunch
freddienuxx said:
ok will try. thx a bunch
Click to expand...
Click to collapse
Have u tried it? Did it worked? sparkrite was so kind trying to help me. For some reason this procedure worked for him and for freddienuxx but not for me.
@luisnica98 , you never replied to my PM.
Just wondering if you tried the TWRP I linked to ? :-
https://files.fm/u/cy3nchp3
Sparkrite said:
@luisnica98 , you never replied to my PM.
Just wondering if you tried the TWRP I linked to ? :-
https://files.fm/u/cy3nchp3
Click to expand...
Click to collapse
Sorry i didnt replied. Yes. I tried that one too. The same result, many times. Perhaps there is a difference among the tablets that make some procedure or twrp file work for some tabs and dont work for others.
luisnica98 said:
Sorry i didnt replied. Yes. I tried that one too. The same result, many times. Perhaps there is a difference among the tablets that make some procedure or twrp file work for some tabs and dont work for others.
Click to expand...
Click to collapse
Unlikely though, have you tried different PCs or different USB ports or even different USB leads.
I hope you are using the lead that came with the tablet.
Sparkrite said:
Unlikely though, have you tried different PCs or different USB ports or even different USB leads.
Thanks a lot for your patience. I was using the front usb ports, so I moved to backports. I tried a different usb lead or cable. no different result. I made a video and uploaded to youtube. It doesnt show the exact moment I hit enter and the tablet reacts and disconect de usb cable, because my bouth hands were busy . you can see I follow instructions. unfortunately it didn work and the tablet restarted normaly.
https://youtu.be/EWW8bFyIQEI
Click to expand...
Click to collapse
Excellent vid, it looks like the tablet for some reason is not even trying to go to recovery mode, why I don't know.
What happens when booted and you issue from ADB reboot recovery ?
Or even from fastboot mode, fastboot reboot recovery ?
EDIT: Try the latest minimal ADB :-
https://forum.xda-developers.com/showthread.php?t=2317790
Sparkrite said:
Excellent vid, it looks like the tablet for some reason is not even trying to go to recovery mode, why I don't know.
What happens when booted and you issue from ADB reboot recovery ?
Or even from fastboot mode, fastboot reboot recovery ?
EDIT: Try the latest minimal ADB :-
https://forum.xda-developers.com/showthread.php?t=2317790
Click to expand...
Click to collapse
After I execute reboot recovery, tablet reacts, I disconnect usb, the screen goes black for a second and then the tablet goes to fastboot mode. with +- buttons I search menu for recovery, I hit enter, the tablet restarts, keeping android recovery. By the way, im using the latest minimal adb . Thanks anyway :good:
luisnica98 said:
<snip>
I hit enter, the tablet restarts, keeping android recovery. By the way, im using the latest minimal adb . Thanks anyway :good:
Click to expand...
Click to collapse
But therin lies the problem, its not even going to stock recovery, at least its not in the vid.
Sparkrite said:
But therin lies the problem, its not even going to stock recovery, at least its not in the vid.
Click to expand...
Click to collapse
I wonder if everybody but me has succed installing twrp in tb-x704v. If we want to help and get helped we need feed back. I know not much interest in rooting this tablet since no Custom ROM available yet (as far as I know), but we should try one step at the time.
How did you get bootloader unlocked guys, please!