Database Users

[Q] Fastboot Reason: Flash Failure

I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad

So did you ever root?
Sent from my Galaxy Nexus using xda premium

skippid said:
So did you ever root?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No. I'd like to eventually but right now, I need to make that fastboot lock screen go away. Please treat me like a noob if it's not already apparent.
Thanks

What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...

sloosecannon said:
What caused the update to fail? Also, you're lucky btw - Normally a failed update == a brick.
If you didn't root, you can probably take it to Verizon. If you were flashing the OTA and it went bad, that shouldn't be a problem at all...
Click to expand...
Click to collapse
I followed this video on youtube: youtube.com/watch?v=oDzMQykQ2fA How to Upgrade To And Root Jelly Bean on Droid Razr!
I watched the script run and it kept saying "fail" on several line items and I knew I was in trouble. Unfortunately this was self-induced and I have no desire to go to Verizon for help. I'm not that much of a noob. Anyhow, I'd just like to get back to square one and start over. What I did to get to BP Tools is to hold down volume up, volume down, and power button. Screen shuts off..let those buttons up and press them again which brings me to a second menu. From there I can choose recovery, fastboot, BP Tools, factory reset. The only one that helped was BP Tools which basically sent the phone to a regular boot and it acts normal. If I choose recovery, I get the android dude on his back with a explanantion or question mark, don't recall. If I press volume down, volume up and then release volume up, I can get to the menus where it allows you to run install from disk or something like that. I can't get to the point where I can see my phone on the computer so that I could place a flash file on the phone and re-flash it or something. If any of this sounds remotely familiar to anyone out there, please feel free to add your 2 cents. Thanks!

Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium

skippid said:
Try to wipe all user data after you get to the screen where you can install zips in recovery. See if that works. Pm me if you get stuck and we can possibly fix it through adb
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I did try that..sorry should have mentioned it. No dice. Same screen and I got the pleasure of setting the wife's phone up again.
I'm open to suggestions. adb?

ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
Click to expand...
Click to collapse
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...

Thank you sloosecannon. Had some logging in troubles so I appreciate it!

TMYINC said:
Thank you sloosecannon. Had some logging in troubles so I appreciate it!
Click to expand...
Click to collapse
No problem

sloosecannon said:
I see your problem...
DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip
The M is an XT907...
Use this one: http://forum.xda-developers.com/showthread.php?t=2207419 and do a fastboot restore...
Click to expand...
Click to collapse
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.

ce_lloyd said:
This looks really straightforward. I think I can handle it. Are you certain it will work? Just plug in the phone and run the bat file? Right now the phone works so I guess will give it a shot and hopefully I'm on my way. Thanks everyone for the assist.
Click to expand...
Click to collapse
Okay, this worked flawlessly. Thanks so much for the help. Truly amazing pointing this dunce in the right direction! Gnite.

Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2

aichauhan said:
Hi all!
I've XT926/Razr HD (Which I've rooted with towelroot)
First I tried to root it with the help of geohot (for razr M), but my phone stuck on the reboot, what I saw on the screen was:
AP Fasboot Flash Mode (S)
10.9B(*) (sha-61146a2, 2014-05-02 03:15:48)
eMC Info: Size 16GB
Device is LOCKED. Status Code: 0
Battery OK
Connect USB
Data Cable
Fasboot reason: Flash Falure
Whenever I reboot my phone I see this screen, what I want is just to get rid of this issue.
My system version is 183
If anyone can help me to fix this issue I will be very thankfull.
Thanks in advance!
---------- Post added at 01:11 AM ---------- Previous post was at 01:04 AM ----------
One thing more which I forgot to mention that my phone is running on KitKat 4.4.2
Click to expand...
Click to collapse
You need to flash the stock firmware using RSD or House of Moto. This should be posted over at the HD forums, but the process is essentially the same for any Moto device. There's tons of threads about it. Download the software, download the firmware, connect the phone and flash.
Sent from my Blissful RAZR M 5.0.2 from Tapatalk

Flash Failure xt907 droid razr m verizon 4.4.2
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
ce_lloyd said:
I'm in over my head and hoping the kindness of a stranger can bail me out! It all started when I attempted to root my wife's Razr M from Verizon. I used a utility (the DROID_RAZR_Utility_Jellybean_XT912_WinMacLin.zip) to attempt an update and then a root. Well the update failed and now I see this when the phone starts up.
AP Fastboot Flash Mode (S)
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
So I figured out that I can get to BP Tools and this somehow bypasses the problem and boots the phone normally. So as long as my wife doesn't turn the phone off, she'll be fine but I cannot leave it this way. I am open to suggestions and at your mercy. Thanks in advance!
-Chad
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?t=2207419
osk4rin said:
Hello there!
i have the same proble with my xt907 droid razr m verizon 4.4.2.
Did you fix this problem?
can you help mw to fix it,i dont know how
thank you so much!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2207419

zip folder link is not available anymore
zip folder link is not available anymore
do you have the zip available?
many thanks!
ce_lloyd said:
http://forum.xda-developers.com/showthread.php?t=2207419
Click to expand...
Click to collapse

osk4rin said:
zip folder link is not available anymore
do you have the zip available?
many thanks!
Click to expand...
Click to collapse
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs

Flash Failure xt907 droid razr m verizon 4.4.2
I got this flash failure.
sd_shadow said:
that hasn't been updated in a long time, likely wouldn't work with the bootloader on your device
what bootloader version is on the device (A P Fastboot version)?
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse

osk4rin said:
I got this flash failure.
Click to expand...
Click to collapse
there is no error on the screen
that is normal fastboot screen for the xt907
device has the latest bootloader only 183.46.15 firmware will work
use the firmware in my RSD lite thread
http://forum.xda-developers.com/showthread.php?t=3184005
[How To][XT907] Flash Firmware with RSD Lite to restore stock firmware/Unbrick (2015)
Sent from my KFFOWI using XDA Labs
---------- Post added at 04:20 AM ---------- Previous post was at 04:17 AM ----------
if there was an error, it would be lower on the part of screen, that's not showing
Sent from my KFFOWI using XDA Labs

I messed up my OP2

hello,
I was on a custom rom Cyanogen Android M. But i wanted to go back to the standard Hydrogen OS. I followed the steps on the site. But i followed the wrong steps. And now i bricked my phone. Because the settings menu is working, but i can't go in developer mode. Can't access recovery mode as well. Please help me. I looked all over the internet
Thank you
p.s. This is my first post

mitchveenendaal said:
hello,
I was on a custom rom Cyanogen Android M. But i wanted to go back to the standard Hydrogen OS. I followed the steps on the site. But i followed the wrong steps. And now i bricked my phone. Because the settings menu is working, but i can't go in developer mode. Can't access recovery mode as well. Please help me. I looked all over the internet
Thank you
p.s. This is my first post
Click to expand...
Click to collapse
Firstly, I do not know if your phone came default with H2OS or OOS. So I will give you the route you need to choose if the default OS on your phone was OOS (Oxygen OS)
OOS
First take your phone back to default stock using this guide http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
Next unlock your bootloader from the developer options.
Then reboot to fastboot and flash TWRP Hybrid Version 3.0.2.0 [Search in the General Thread. I believe i have seen it there]
Lastly, follow the guide http://forum.xda-developers.com/oneplus-2/general/rom-hydrogenos-v1-2-0-sensors-t3264711 for H2OS

Try method 1 in this link. it will install Stock recovery, On there you can install Oxygen OS. If you need any help Message me.

fareed_xtreme said:
Firstly, I do not know if your phone came default with H2OS or OOS. So I will give you the route you need to choose if the default OS on your phone was OOS (Oxygen OS)
OOS
First take your phone back to default stock using this guide http://forum.xda-developers.com/oneplus-2/general/guide-official-op2-stock-reset-to-oos-3-t3402020
Next unlock your bootloader from the developer options.
Then reboot to fastboot and flash TWRP Hybrid Version 3.0.2.0 [Search in the General Thread. I believe i have seen it there]
Lastly, follow the guide http://forum.xda-developers.com/oneplus-2/general/rom-hydrogenos-v1-2-0-sensors-t3264711 for H2OS
Click to expand...
Click to collapse
I got an error. I think i did everything correct. Look at the screenshot.
https://gyazo.com/7b9742312ca88230f7fbc2844c455c1a
https://gyazo.com/fd93616a2059c6e115485e9187033792

mitchveenendaal said:
I got an error. I think i did everything correct. Look at the screenshot.
https://gyazo.com/7b9742312ca88230f7fbc2844c455c1a
https://gyazo.com/fd93616a2059c6e115485e9187033792
Click to expand...
Click to collapse
You were in test mode right? Assuming you were, I would urge you to:
1. Try a different USB Type C Cable.
2. Try a different USB Port.
Let me know the results.

fareed_xtreme said:
You were in test mode right? Assuming you were, I would urge you to:
1. Try a different USB Type C Cable.
2. Try a different USB Port.
Let me know the results.
Click to expand...
Click to collapse
It worked kind of. I restarted my pc and installed the driver again. But I don't see it in the chinese program. I think i am gonna restart.
https://gyazo.com/c4ca6e9e4dfa0df0075e060a45911b3d

mitchveenendaal said:
It worked kind of. I restarted my pc and installed the driver again. But I don't see it in the chinese program. I think i am gonna restart.
https://gyazo.com/c4ca6e9e4dfa0df0075e060a45911b3d
Click to expand...
Click to collapse
I know this is something you might have done but you could try to scroll down in the flashing program and you must find the line there hopefully?

fareed_xtreme said:
I know this is something you might have done but you could try to scroll down in the flashing program and you must find the line there hopefully?
Click to expand...
Click to collapse
Is it this one? comee?
https://gyazo.com/2c81d08fa6cc198c4b0a0569dbddfdb2

mitchveenendaal said:
Is it this one? comee?
https://gyazo.com/2c81d08fa6cc198c4b0a0569dbddfdb2
Click to expand...
Click to collapse
Yes it is

fareed_xtreme said:
yes it is
Click to expand...
Click to collapse
ty man got my phone back <3<3

I Made A Terrible Mistake!

Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before

kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this:
Download a flashable custom rom, put the rom *.zip file in the same folder with ADB.
Go into recovery TWRP, connect your phone to your computer.
Push rom *.zip file to your phone's internal storage with this command in ADB:
push [file.zip] /sdcard/.
Then flash that rom file with TWRP.

Well, sir, how can I get into TWRP? I can't even droidboot... My recovery that I flashed was stock

deleted.

kelvinvalencio said:
Hello there!
So, I'm using Zenfone 5 (2G) Running on Official Lolipop
I had my phone bootlooped back in that time, then I flashed a wrong recovery version, it was KitKat version that I flashed, I got into Recovery Mode.
I tried to sideload update packages (both KitKat and Lolipop ROM) and it showed me some error like can't mount /cache (invalid arguments), I expected this as losing partition (If I'm not wrong)
And now I can't even get into droidboot at all, here is the responds from following things I do :
Recovery button combination : Works (Gets to the recovery)
Power button : Shows USB logo
Droidboot button combination : Shows manufacturer logo forever (Stuck)
But, as I said, I tried to sideload the packs and it fails...
Could someone help me? Maybe some easy way to fix this? For a note, I tried bunch of tutorials to fix my device, the last one was xFSTK thing.. I followed every single step correctly and ended up with an error.
Thanks before
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557

tank4k said:
can u open droid boot?
Click to expand...
Click to collapse
No

paktepu said:
Try this
http://forum.xda-developers.com/zenfone-5/general/zenfonetoolkit3-24-40-87-t3406557
Click to expand...
Click to collapse
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU

kelvinvalencio said:
Got your post.. Didn't download..
I want to make sure one thing.. Does this work on TW SKU? Because It's writen that your file is integrated with WW SKU
Click to expand...
Click to collapse
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app

paktepu said:
Basicly the procedure to debrick is same. You need to load bootloader temporary since you have a broken droidboot including your partition. I already have same problem with you before.
Yeah its different, you cant use ww to fix this. Find on official zentalk tw forum for complete detail. Shakalaca post that.
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!

kelvinvalencio said:
Thanks a lot!
Anyway, I've got few questions left..
Yesterday, I did download zip files from this debrick thread (Should be familiar with you) http://forum.xda-developers.com/zenfone-5/help/debrick-asus-zenfoen-5-fastboot-t3377455
My question is, does this work the same as your files? And, could I do something about it? Like re-use by recycle again the files I've downloaded with something that might help my phone? You know.. 900 MB is not something very small for me.. And maybe I could download separated files that is required.. And make the use of Debrick files I downloaded?
And.. May I have the link of Shakalaca's post, if you don't mind? Thanks a lot, like a lot!
Click to expand...
Click to collapse
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app

paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I followed the Debrick one. The problem comes when I ran Debrick.dat, from the Cloverview mode (Press vol down and connect to pc). While the Debrick program runs, the phone "boots". Shows up USB logo and it goes red. Few seconds after then, the program closes, leaves the phone on red USB logo. Is this something normal?
Btw that link can't help.
Sent from my EG680 using XDA-Developers mobile app

Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
---------- Post added at 09:07 PM ---------- Previous post was at 09:03 PM ----------
DogeLordTR said:
Didn't you try reboot from bootloader. If it solves, it means normal. You must thank to intel for this problem.
Click to expand...
Click to collapse
OK, I'm really stupid, sorry for time waste.

paktepu said:
Yes you can do manual from that link but from step 8 download tw.zip.
Cek pm for shakalaca
Sent from my ASUS_T00F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hey um, I have contacted Shakalaca and until today I have not retrieved any reply. This problem haven't been solved. Any idea? I see you know a lot about this, and you're very popular arround here.

This happened with my Asus Zenfone 5 (T00j). Tried every solution available on net without sucess, finally took it to Service Center and they had to replace the motherboard

Possible root for Tab S2 SM-T818V and SM-T818A aka SM-T819

I have a possible root solution for the T818V/T818A aka the Verizon and ATT version of the T819 if any one is interested in giving it a go?
.

I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Click to expand...
Click to collapse
Could you post your firmware build number?

le0.br4zuc4 said:
I'll try it out... I have the Verizon variation
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Here we go. This is for T818VVRU1AQB1 firmware, but probably works on any revision 1 firmware.
Instructions
1. Enable OEM UNLOCK
In Settings>About>Software info tap the build number 7 times to enable developer options. Once you've enabled developer options, developer options will appear in settings just above the About device option. Open developer options, the 4th or 5th option should be “OEM Unlock”. Turn on.
2. Download the eng boot image.
This is a special boot image normally used by engineers, it allows selinux to be booted in permissive mode with relaxed root restrictions.
Do not replace this image with the stock image after rooting your device or you will possibly soft brick your device.
https://www.androidfilehost.com/?fid=529152257862710309
3. Install boot image:
Download Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the SM-T818V_eng_boot.tar to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Reboot
Check in Settings>About>Software, your device should be in Selinux permissive mode.
4. Install and run Kingroot:
Make sure you have an internet connection.
You may need to run Kingroot several times to gain successful root.
5. Install and run SuperSU me to remove Kingroot and convert to SuperSU (not required) :
https://play.google.com/store/apps/...ore&pcampaignid=APPU_1_uzPDVbGyFcGNyATHrqmoCA
6. Wifi fix:
modify the line below in /system/build.prop:
ro.securestorage.support=true to false
Good luck I hope it works for you. Let me know your outcome.
.

ashyx said:
Could you post your firmware build number?
Click to expand...
Click to collapse
AQA3
Sent from my SM-T818V using Tapatalk

le0.br4zuc4 said:
AQA3
Click to expand...
Click to collapse
You should be fine, let me know your results.

ashyx said:
You should be fine, let me know your results.
Click to expand...
Click to collapse
Will try it out soon
Sent from my SM-T818V using Tapatalk

There's been 10 downloads yet no one has come back with any reports?

ashyx said:
There's been 10 downloads yet no one has come back with any reports?
Click to expand...
Click to collapse
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...

burattino said:
I have T818v on t818vvru1apj1
I could try but can't fine download link for the stock firmware for the restore purpose if anything goes wrong...
Click to expand...
Click to collapse
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore

le0.br4zuc4 said:
good idea.. I didn't think about that before...
Tablet won't boot up, just stays on the splash screen! I will try to find stock firmware to restore
Click to expand...
Click to collapse
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.

ashyx said:
The boot image flashed OK with odin? Which splash screen?
This could mean you need to wipe the data partition first for it boot.
I should be able to get the stock firmware for you sometime tomorrow.
Click to expand...
Click to collapse
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
Flashed fine. It's the screen that says Android very big and had the tab model, right before it goes into the boot animation.
I'll wipe data partition and report back.
Please don't feel responsible for it, I'm about trying anything for rooting... I'm sure we'll get fixed
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.

ashyx said:
Sure, we'll get it fixed no worries.
Anyway it seems like you need the accompanying botloader if its getting stuck on the bootloader animation.
https://www.androidfilehost.com/?fid=457095661767146350
If it still doesn't boot I'll give you a link to the entire engineering firmware via PM. Then se how you get on with that and gaining root.
.
Click to expand...
Click to collapse
Thanks for the help buddy This didn't help either

le0.br4zuc4 said:
Thanks for the help buddy This didn't help either
Click to expand...
Click to collapse
Did the firmware load OK?

ashyx said:
Did the firmware load OK?
Click to expand...
Click to collapse
No, didn't work either. I'm going to get an insurance replacement
Sent from my Pixel XL using Tapatalk

le0.br4zuc4 said:
No, didn't work either. I'm going to get an insurance replacement
Click to expand...
Click to collapse
Are you saying that the full firmware didn't flash either? At what point does it fail?
Anyway don't worry I'll upload the stock AQA3 firmware later.
EDIT: I think this is all you'll need to get booting again. Flash via AP in ODIN.
If not I'll give you the link to the entire firmware.
https://www.androidfilehost.com/?fid=745425885120718683
.

i have the AQA3 as well, which files should i use first to help with this?

rootisthebest said:
i have the AQA3 as well, which files should i use first to help with this?
Click to expand...
Click to collapse
To do what, Root?

youve posted multiple files, i just wanna make sure i flash the right one(s), and can relay my results

install update

Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?

chrb1985 said:
Hi guys. I have TWRP installed on my phone and I want the latest Android update. If I download the whole package can I then just install the system and boot files via TWRP? Or is it something more I need to do and can I just keep my data?
Click to expand...
Click to collapse
Use fastboot and follow section 9:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk

Is it no way around fastboot?

chrb1985 said:
Is it no way around fastboot?
Click to expand...
Click to collapse
You can flash vendor, boot, and system images using TWRP then root again. However, bootloader and radio must be flashed either as a zip in TWRP or via fastboot. Bootloader and radio images cannot be flashed via the TWRP "image install." It is recommended that you flashed radio and bootloader through fastboot.
Sent from my Nexus 5X using Tapatalk

Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?

chrb1985 said:
Okay thanks a lot. But my problem is that when I connect my USB cable the phone don't give me any options.. it just charges. That's why I want to try to start fresh again.. do you may have some tips?
Click to expand...
Click to collapse
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Hey, click reply when you post. It gives the person helping you a notification that you've responded lol
If using windows, try to reinstall the Windows driver and minimal adb tools from the guide below:
https://forum.xda-developers.com/showthread.php?t=3206928
Click to expand...
Click to collapse
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?

chrb1985 said:
You see the problem is the I am not an administrator on any of the available PC's .. but it seems to be something wrong with the phone. Because when I connect it it does not happen anything. The only issue is that I can't transfer files from the phone to the computer, not even not, like mtp.. do you understand?
Click to expand...
Click to collapse
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.

Exodusche said:
If it's stock you like could always flash SuperXe . 8.1 versions are latest stock and 8.0 is built from stock source with latest security. All of which are flashable via twrp. On a side note pick yourself up cheap otg cable so you can backup your files on thumb drive. Makes it real easy if you have to completely wipe your phone. Especially if you don't have much access or having issues with computer.
Click to expand...
Click to collapse
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?

chrb1985 said:
Hi again. I have now tried a few different rooms and the problem persist.. but my computer connects to other phones. Just not the angler.. any thoughts?
Click to expand...
Click to collapse
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .

Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
I will try it tomorrow

Exodusche said:
I really couldn't tell you don't remember having to really install any drivers . I installed nexus toolkit though maybe that did. Check device manager if your using Windows and see if anything is coming up. I think I remember someone having to roll back driver to get his 6p to work on Windows 10. Then the obvious trying different cable and USB ports. Try putting USB debugging on in developer options. That's all I can think of sorry not much help .
Click to expand...
Click to collapse
Okey buddy! Thanx anyway