Hello,
Tried to root my note 3 4.4.2 N9005XXUENA6
i used odin3.07 with CF-Auto-Root-hlte-hltexx-smn9005
But ti will not boot in any way and as stated by Mr. Chainfire
"NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process."
it won't boot.(stays in a loop ? )
Flashing back to N9005XXUENA6 is no problem and then it is working properly
http://forum.xda-developers.com/showthread.php?t=2466423
Any ideas? Thanks in advance
wiebew said:
Hello,
Tried to root my note 3 4.4.2 N9005XXUENA6
i used odin3.07 with CF-Auto-Root-hlte-hltexx-smn9005
But ti will not boot in any way and as stated by Mr. Chainfire
"NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process."
it won't boot.(stays in a loop ? )
Flashing back to N9005XXUENA6 is no problem and then it is working properly
http://forum.xda-developers.com/showthread.php?t=2466423
Any ideas? Thanks in advance
Click to expand...
Click to collapse
Reflash the latest CF and it should be OK, sounds like you're using the older one.
radicalisto said:
Reflash the latest CF and it should be OK, sounds like you're using the older one.
Click to expand...
Click to collapse
I am sorry , but not yet familiar with this, just starting to get the hold of it, but i don't know where to find the CF which is newer.
wiebew said:
I am sorry , but not yet familiar with this, just starting to get the hold of it, but i don't know where to find the CF which is newer.
Click to expand...
Click to collapse
Here you go :good:
radicalisto said:
Here you go :good:
Click to expand...
Click to collapse
Thanks again, but this CF is the one , i am using already.
is it possible i have to enable usb debugging ?
wiebew said:
Thanks again, but this CF is the one , i am using already.
is it possible i have to enable usb debugging ?
Click to expand...
Click to collapse
I owe you an apology, thank you very much, it works right now,
only looked at the title of the CF and not looked at the difference in the file size
Thanks again !
Do i also need to flash the CWM file ?
wiebew said:
I owe you an apology, thank you very much, it works right now,
only looked at the title of the CF and not looked at the difference in the file size
Thanks again !
Do i also need to flash the CWM file ?
Click to expand...
Click to collapse
If you wish to flash a custom rom you can get the latest CWM .6 rls or the latest TWRP
radicalisto said:
If you wish to flash a custom rom you can get the latest CWM .6 rls or the latest TWRP
Click to expand...
Click to collapse
ok, in that case, i will wait, first I have to give my heart a bit of peace, after this nerve wracking journey
( was the first time itried, but certainly not the last)
Have a nice weekend
Related
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
143bubblepop said:
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
Click to expand...
Click to collapse
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
I'm new to the rooting world
Rosli59564 said:
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
Click to expand...
Click to collapse
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
143bubblepop said:
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
Click to expand...
Click to collapse
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Rosli59564 said:
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Click to expand...
Click to collapse
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
Yes in PDA slot in ODIN...
143bubblepop said:
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
Click to expand...
Click to collapse
I don't think you'll need to
Rosli59564 said:
I don't think you'll need to
Click to expand...
Click to collapse
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
143bubblepop said:
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
Click to expand...
Click to collapse
It shouldn't. Which cwm version you used?
Rosli59564 said:
It shouldn't. Which cwm version you used?
Click to expand...
Click to collapse
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
143bubblepop said:
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
Click to expand...
Click to collapse
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Rosli59564 said:
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Click to expand...
Click to collapse
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
143bubblepop said:
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
Click to expand...
Click to collapse
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Rosli59564 said:
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Click to expand...
Click to collapse
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
143bubblepop said:
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
Click to expand...
Click to collapse
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
143bubblepop said:
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
Click to expand...
Click to collapse
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Rosli59564 said:
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Click to expand...
Click to collapse
Its 4.3
Install mega?
143bubblepop said:
Its 4.3
Install mega?
Click to expand...
Click to collapse
If you would like twrp no need mega. Just download it from the site
I accidentally overwritten the SecSettings.apk- so now every time I try to open the settings app it crashes..
Does anyone have a copy of the settings apk?
Any info is much appreciated!
Boot329 said:
I accidentally overwritten the SecSettings.apk- so now every time I try to open the settings app it crashes..
Does anyone have a copy of the settings apk?
Any info is much appreciated!
Click to expand...
Click to collapse
What firmware are you running? Stock odexed?
Sent from my SM-N9005
celderic said:
What firmware are you running? Stock odexed?
Sent from my SM-N9005
Click to expand...
Click to collapse
I am running stock and its rooted.
I have no clue on how to check the firmware without the settings application...feels sort of hopeless haha.
Do you think if I flash a new rom everything will work?
I don't have a recovery installed and everytime I try installing one I get the "seandroid enforcing" bit with it boot looping.
Boot329 said:
I am running stock and its rooted.
I have no clue on how to check the firmware without the settings application...feels sort of hopeless haha.
Do you think if I flash a new rom everything will work?
I don't have a recovery installed and everytime I try installing one I get the "seandroid enforcing" bit with it boot looping.
Click to expand...
Click to collapse
You can dirty flash the rom you are on without wiping and all should be restored, just reflash the custom recovery and reroot afterwards.
gee2012 said:
You can dirty flash the rom you are on without wiping and all should be restored, just reflash the recovery and reroot afterwards.
Click to expand...
Click to collapse
I would if I could! For some reason everytime I try flashing a recovery through Rom Manager or GooManager or others has trouble booting into the recovery
Boot329 said:
I would if I could! For some reason everytime I try flashing a recovery through Rom Manager or GooManager or others has trouble booting into the recovery
Click to expand...
Click to collapse
Uninstall rom manager ad never use it again mate, it used to be bad but lately its awfull. Just flash the CWM .tar file with Odin and you`re set. Link CWM recovery by Chenglu http://forum.xda-developers.com/showthread.php?t=2454079. Pick the right .tar file and its done in a jiffy.
gee2012 said:
Uninstall rom manager ad never use it again mate, it used to be bad but lately its awfull. Just flash the CWM .tar file with Odin and you`re set. Link CWM recovery by Chenglu http://forum.xda-developers.com/showthread.php?t=2454079. Pick the right .tar file and its done in a jiffy.
Click to expand...
Click to collapse
Yeah I just realized its pretty awful. I never personally used Odin before- do you know a step by step post that could get me familiar with flashing the tar file with Odin?
Thank you for you information thus far!
Boot329 said:
Yeah I just realized its pretty awful. I never personally used Odin before- do you know a step by step post that could get me familiar with flashing the tar file with Odin?
Thank you for you information thus far!
Click to expand...
Click to collapse
Here is a YouTube tut. http://www.google.nl/url?sa=t&rct=j...HIzgrj-ZklmZ5SiAoPD1u4w&bvm=bv.65058239,d.ZWU and here a written one http://forums.androidcentral.com/sp...08-guide-how-flash-tar-files-odin-3-07-a.html.
For some reason Odin isn't recognizing my phone. I think I installed the necessary drivers so it should recognize it
Boot329 said:
For some reason Odin isn't recognizing my phone. I think I installed the necessary drivers so it should recognize it
Click to expand...
Click to collapse
I tried a different usb and that seemed to do the trick.
Hopefully I can fix this:laugh:
Thanks!!
Hi,
I have Note 3 - SM-N900. with ROM SER [Russia].
After flashing the ClockWork, It's not working, see the attachment! I can't choose ZIP file.
Reflash it, that looks like the stock recovery. Make sure you flash the correct one for your device.
Sent from my SM-N9005 beast of a phone.
Sammath said:
Reflash it, that looks like the stock recovery. Make sure you flash the correct one for your device.
Sent from my SM-N9005 beast of a phone.
Click to expand...
Click to collapse
Did it, no success. I have 4.4.2, just flashed the Kitkat version of the ClockWork, just the same.
asus_boy said:
Did it, no success. I have 4.4.2, just flashed the Kitkat version of the ClockWork, just the same.
Click to expand...
Click to collapse
Does odin shows 'pass' message?. After successful cwm flash, you phone will reboot and automatically enter cwm. Then after some times it will attempt to reboot to OS. If it ask to flash stock recovery then choose no
asus_boy said:
Hi,
I have Note 3 - SM-N900. with ROM SER [Russia].
After flashing the ClockWork, It's not working, see the attachment! I can't choose ZIP file.
Click to expand...
Click to collapse
Extract the attached .zip and flash the extracted file "recovery.tar.md5" using Odin.
Rosli59564 said:
Does odin shows 'pass' message?. After successful cwm flash, you phone will reboot and automatically enter cwm. Then after some times it will attempt to reboot to OS. If it ask to flash stock recovery then choose no
Click to expand...
Click to collapse
Yes, the PASS message showed. and then rebooted.
Extract the attached .zip and flash the extracted file "recovery.tar.md5" using Odin.
Click to expand...
Click to collapse
Okay, going to do it.
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
asus_boy said:
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
Click to expand...
Click to collapse
Strange, try a factory reset and re-flashing the ROM again, there has been a issue of CWM n TWRP not working after flashing on ND1 "I personally faced it" but the file I provided should have worked without any probs , anyways try a reset...
RuchRha said:
Strange, try a factory reset and re-flashing the ROM again, there has been a issue of CWM n TWRP not working after flashing on ND1 "I personally faced it" but the file I provided should have worked without any probs , anyways try a reset...
Click to expand...
Click to collapse
My build number is DND1, I think the problem is that. actually I don't want to reset it. It's working fine now. maybe later
Make sure reactivation lock is OFF
Sent from my leanKernel 2.5.1 powered stock 4.4.2 (NE6) SM-N900T
asus_boy said:
No success the same. What is the problem? after reflashing the stock rom, I got 2 updates from samsung. Aren't they limiting this process? maybe?
Click to expand...
Click to collapse
Sry if u did it already, but did u activate dev mode and check USB debugging in settings?
4aces said:
Sry if u did it already, but did u activate dev mode and check USB debugging in settings?
Click to expand...
Click to collapse
No, the USB debugging wasn't enable, just did it now, going to try it.
Q&A for [Guide][How to Root Lollipop GT-I9500][5.0.1]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Guide][How to Root Lollipop GT-I9500][5.0.1]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Tried this, but can't see the "Philz settings" in the recovery menu
flaviote said:
Tried this, but can't see the "Philz settings" in the recovery menu
Click to expand...
Click to collapse
its on the main recovery screen!
I upload the .tar.md5 via Odin (AP), everything finishes ok, but i see the original recovery menu.
It's anything i doing wrong?
RubbaBand said:
its on the main recovery screen!
Click to expand...
Click to collapse
it happens some times, but try this
download this
then extarct it
then flash it via odin
and tell me if it works!
RubbaBand said:
it happens some times, but try this
then extarct it
then flash it via odin
and tell me if it works!
Click to expand...
Click to collapse
Hi
I tried to root using philz touch recovery method. I can't see the "philz touch recovary" option in my phone's recovary menu.
Shoud i try to flash it using above file?
Note: I don't have any experience with rooting a phone
sree113 said:
Hi
I tried to root using philz touch recovery method. I can't see the "philz touch recovary" option in my phone's recovary menu.
Shoud i try to flash it using above file?
Note: I don't have any experience with rooting a phone
Click to expand...
Click to collapse
no, try this file here : Download
then do what the rooting thread say, good luck
RubbaBand said:
no, try this file here
then do what the rooting thread say, good luck
Click to expand...
Click to collapse
Thank you for the reply.
will it work on lollipop 5.0.1?
If yes this is what i am going to do
Flash using Odin by selecting the PDA( Auto reboot and F.Reset time options are already grayed out)
it will reboot automatically.
done , right?
sree113 said:
Thank you for the reply.
will it work on lollipop 5.0.1?
If yes this is what i am going to do
Flash using Odin by selecting the PDA( Auto reboot and F.Reset time options are already grayed out)
it will reboot automatically.
done , right?
Click to expand...
Click to collapse
yes it should! but before odin, you need to extract the file first
RubbaBand said:
yes it should! but before odin, you need to extract the file first
Click to expand...
Click to collapse
Thank you.. Completed successfully
sree113 said:
Hi
I tried to root using philz touch recovery method. I can't see the "philz touch recovary" option in my phone's recovary menu.
Shoud i try to flash it using above file?
Note: I don't have any experience with rooting a phone
Click to expand...
Click to collapse
Philz touch recovery is not an option. It's a recovery that you need to flash to your phone.
Lennyz1988 said:
Philz touch recovery is not an option. It's a recovery that you need to flash to your phone.
Click to expand...
Click to collapse
Thank you for the information..
I am having the similar problem it just backs to origional recovery
1. flash cf auto root via odin
2. Flash philz recovery via odin
3. go to recovery and install latest supersu zip from sd card
4. Restart
Does this rooting method also apply for I9500XXUHOC1 ???
buntymaskey said:
Does this rooting method also apply for I9500XXUHOC1 ???
Click to expand...
Click to collapse
Yes it should!
will this work for s4 e330s (korea)
will this root method work on e330s skt korea version? if not is there an available package for this model? TIA
xdwinx said:
will this root method work on e330s skt korea version? if not is there an available package for this model? TIA
Click to expand...
Click to collapse
I think its will work if you have a custom recovery for your device, then you will be able to flash the SuperSU file
RubbaBand said:
Yes it should!
Click to expand...
Click to collapse
Did you manage to root this? As I heard that it's going into bootloop when trying to root.
Thanks
Sent from my GT-I9500
washi.sasoriza said:
Did you manage to root this? As I heard that it's going into bootloop when trying to root.
Thanks
Sent from my GT-I9500
Click to expand...
Click to collapse
No, it wont
Hello,
I need a CF-Auto-Root for an S5 SM-G900I with the build lrx21t.g900idvu1boj1 . I can't find it anywhere though. Is there an updated site with the new links?
Thanks in advance
Just use the one in the CF AR thread
http://download.chainfire.eu/409/CF-Root/CF-Auto-Root/CF-Auto-Root-klte-kltedv-smg900i.zip
*Detection* said:
Just use the one in the CF AR thread
Click to expand...
Click to collapse
Will it work ok though? I don't want to brick my phone.
nn666 said:
Will it work ok though? I don't want to brick my phone.
Click to expand...
Click to collapse
Depends on the revision of the phone, some work, some don't
If you don't want to risk it, flash TWRP 2.8.7.0 with ODIN, then SuperSU from TWRP recovery
Uncheck the "Auto reboot" setting in ODIN, and pull the battery once it's finished flashing TWRP, then replace the battery, and from a powered off state, boot straight into TWRP (Volume UP & Home & Power) and flash SuperSU
Make sure SuperSU.zip is on your MicroSD card ready to flash
*Detection* said:
Depends on the revision of the phone, some work, some don't
If you don't want to risk it, flash TWRP 2.8.7.0 with ODIN, then SuperSU from TWRP recovery
Uncheck the "Auto reboot" setting in ODIN, and pull the battery once it's finished flashing TWRP, then replace the battery, and from a powered off state, boot straight into TWRP (Volume UP & Home & Power) and flash SuperSU
Make sure SuperSU.zip is on your MicroSD card ready to flash
Click to expand...
Click to collapse
Is there any way of finding out if my revision works before trying it? Google search didn't seem to come up with anything... Thanks for your help also.
nn666 said:
Is there any way of finding out if my revision works before trying it? Google search didn't seem to come up with anything... Thanks for your help also.
Click to expand...
Click to collapse
Not that I know of, and we're not sure which revisions work and don't, just seems that newer S5s have issues with CF