So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
143bubblepop said:
So I just used Odin3 v 1.85 and CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 to try and root my device but its stuck at the booting screen with " RECOVERY BOOTING... RECOVERY IS NOT SEANDROID ENFORCING Set Warranty BIt : Recovert"
I'm using an Australian, Telstra, SM-N9005. How do I get it to work again
Click to expand...
Click to collapse
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
I'm new to the rooting world
Rosli59564 said:
Try flashing cwm by chenglu or philz. Both will give you root access as well. Either way you seem don't mind flagging knox to 0x1. Is your phone international n9005 and network unlocked?
Click to expand...
Click to collapse
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
143bubblepop said:
Yeah so I don't mind tripping knox, but I'm not sure how to do either of types steps.
Also, my device it's an international unlocked phone
Click to expand...
Click to collapse
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Rosli59564 said:
Just the same as you did using cf auto root but you'll need this instead.
http://forum.xda-developers.com/showthread.php?t=2454079
Choose the one either jb or kk.
Did you turn off reactivation lock before trying to root?
Afraid that's the one causing your phone to hangup at the screen. Remove battery and turn on your phone if it can boot normally in OS
Click to expand...
Click to collapse
Rosli59564 said:
So you flash again cf auto root successfully?. If yes your phone should be rooted now so you dont need cwm anymore except you want to flash custom rom or mods.
Can't remember when i flash cf last time whether there is superSU in the app drawer or not. Can you see it in the phone?. Try install superSU from Playstore and update binary and rerun root checker.
Still if you want to flash cwm just put it in pda
Click to expand...
Click to collapse
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
143bubblepop said:
Ok, so my reactivation lock is off. I re-downloaded the CF-Auto-Root and I got my phone to work.
Now, with the CWM Based recovery, do I place into the PDA slot in Odin? Or is it not necessary anymore?
On root checker, it hangs and doesn't give me a definite answer
So I'm pretty sure my phone isn't rooted, but for now, its working fine.
Click to expand...
Click to collapse
Yes in PDA slot in ODIN...
143bubblepop said:
I installed SuperSu and restarted my phone and that, opened up root checker and BAM, I'm rooted.
If I were to install CWM, would I need to rewrite my binary for SuperSU
Click to expand...
Click to collapse
I don't think you'll need to
Rosli59564 said:
I don't think you'll need to
Click to expand...
Click to collapse
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
143bubblepop said:
i started flashing CWM and its been stuck on the downloading, set warranty bit: cache page for a while now. Would it normally take a while or does it depends on the computer?
Click to expand...
Click to collapse
It shouldn't. Which cwm version you used?
Rosli59564 said:
It shouldn't. Which cwm version you used?
Click to expand...
Click to collapse
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
143bubblepop said:
http://d-h.st/users/xiaolu/?fld_id=31963
That one,
So what do I do now?
Click to expand...
Click to collapse
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Rosli59564 said:
Just to be sure n9005 for kk?. Redownload and reflash. If still hangup at the screen try boot up normally. Perhaps can try with terminal emulator to flash cwm
Click to expand...
Click to collapse
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
143bubblepop said:
Do i stop the flashing right now and unplug?
Now that i think of it, my device isnt even KK
Click to expand...
Click to collapse
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Rosli59564 said:
As i guess. You phone is 4.3 right? Download for 4.3 i think 6.0.4.5. Remove battery, reenter download mode & reflash the correct file
Click to expand...
Click to collapse
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
143bubblepop said:
i cant find the 4.3 one, yes i tried google
please help
also my phone boots normally
Click to expand...
Click to collapse
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
143bubblepop said:
i tried their website but all i could find were .img files
also, im sorry with my delayed replies, my gmail isnt refreshing constantly
Click to expand...
Click to collapse
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Rosli59564 said:
First check setting>general>about phone. Check what is android version either 4.3 or 4.4.2.
If it is 4.3 download either the followings
https://mega.co.nz/#!C0Y1RbyT!Iq1A1Aaef1qioyDHkGQVtkRUdGN0LCa37umKGMDyDs8
You need to install mega from playstore to download it
Or try twrp
http://forum.xda-developers.com/showthread.php?t=2494245
Click to expand...
Click to collapse
Its 4.3
Install mega?
143bubblepop said:
Its 4.3
Install mega?
Click to expand...
Click to collapse
If you would like twrp no need mega. Just download it from the site
Related
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
astraopcuser said:
Download the attached link. You find a folder of s4 root. Odin 1.85 and Cwm file and a rooting file(only if you need root)
An odin 1.85 specialy for gti 9505. Big thanks to chainfire.
Turn your phone in downloadmode. Connect your Phone to your pc. Open odin and select pda and select the file i9505-cwm-recovery -6.0.3.2-4
Start.
After the phone is rebooting, turn your phone off.
Then volume up,home button and powerbutton at the same time. When you see on top a blue text" recovery booting" let go of the 3 buttons and it boots in cwm. This should do the trick.
http://db.tt/BmvKeopK
Regards
Verstuurd van mijn GT-I9505 met Tapatalk
Click to expand...
Click to collapse
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
King Canute said:
Thanks for trying to help me out, but still I got no luck with this,
After the flashing, when I try to go into recovery mode I can see that the phone tries to install or update something, but a sec after I get some sort of fail message and I'm back to default recovery mode.
I can't understand what seems to be the problem.
Could it be that my phone might be locked to a carrier?
Click to expand...
Click to collapse
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
astraopcuser said:
Is your device rooted yet?
I first rooted my phone and then i flashed cwm recovery via odin 1.85. All in the file you've downloaded.
Click to expand...
Click to collapse
Do I have to root the phone to make the clockworkmod work?
King Canute said:
Do I have to root the phone to make the clockworkmod work?
Click to expand...
Click to collapse
you must first root your phone.:good:
---------- Post added at 10:54 PM ---------- Previous post was at 10:36 PM ----------
astraopcuser said:
you must first root your phone.:good:
Click to expand...
Click to collapse
for the gti 9505 lte is a little bit diverent at this time.
first flash the cf autorootjflte.... via odin. phone in downloadmode, select pda,select cf autoroot jfte... hit start. phone reboots, you see an red/orange android droid then its rebooting
after that turn off your phone . phone in downloadmode, open odin, select pda, select cwm 6.0.3.2-4, hit start
Your phone is rooted with cwm.
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
How rubbish..... its goes that way to get a custom cwm on the gti9505.
He ask cwm, not philz recovery.
You can say next time ....theres another way to get it work.
I only trying to help
Verstuurd van mijn GT-I9505 met Tapatalk
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Obagleyfreer said:
What rubbish!
You DO NOT need to root your phone to install a custom recovery. Are you sure you have i9505??
Download the latest Philz CWM recovery in .tar format and flash this in Odin 1.85.
I've done this on 6 different S4s and NEVER had an issue.
Seems strange that your having problems dude.
Click to expand...
Click to collapse
I'm 100% sure that my phone is a 9505, it's the only version sold in Norway.
Mittaa said:
This version of CWM work perfect and supports exFat (64GB SD Cards).
You don't need root.
Flash as PDA using Odin PC.
http://forum.xda-developers.com/showthread.php?t=2279579
Click to expand...
Click to collapse
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
King Canute said:
It's this version I'm trying to flash with no luck, and I can't understand why it's not working.
Maybe I have to do a factory reset, or flash a complete new stock ROM?
Click to expand...
Click to collapse
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
King Canute said:
Hi,
I've tried several times flashing Clockworkmod 6.0.3.3 and other versions of Clockworkmod for S4 I9505, but after flashing it using Odin 1.85, Odin says ok, and reboot my phone, but after I turn the phone off, and try to start phone into recovery mode using power, volume up and home button at the same time, my phone doesn't find anything to use, so it starts in regular recovery mode (Default as from Samsung).
Anyone have an idea why Clockworkmod won't work on the phone, even when Odin says ok on flashing?
I've made sure that I downloaded the correct file for my phone.
My phone is a euro version, that shouldn't matter?
Click to expand...
Click to collapse
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Mittaa said:
Do you have a proper USB connection between Odin PC and your phone?
Try another USB cable or/and another USB port ...
Did you remember to kill all KIES processes running in background?
CTRL, ALT, DELETE running processes ...
Click to expand...
Click to collapse
I'm using an Samsung retail cable from the S2, but I did try with the S4 retail cable aswell, but still no luck. The flashing goes ok in Odin, so I doubt the cable is the problem. And Kies isn't running in the background at all. Even changed USB port just to be sure testing all the options.
samersh72 said:
in some stock firmwares, when you boot the phone, the stock recovery is re-writing over the flashed custom one:
root your phone, and with a root explorer go to system, delete "recovery-from-boot.p" or rename it to "recovery-from-boot.p.bak"
then go to system/etc, delete this file: "install-recovery.sh" or rename it to "install-recovery.sh.bak.
now you can flash your custom recovery.
Click to expand...
Click to collapse
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
King Canute said:
Ok, so I might have to root my phone and try this out then.. I was hoping to avoid rooting for now.
And the way to root is done using Odin as described in an earlier post?
Will it be possible to reset the counter later on if I need to go back to stock ROM if the phone should need to sendt to service etc? I know it is possible to reset the counter on S3.
Click to expand...
Click to collapse
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
samersh72 said:
if you want to be sure, flash custom recovery, do not check "auto-reboot" or when it says "pass" unplug and take off the battery, then reinsert it, boot straight to recovery so you should see the custom recovery. but once you reboot the phone the stock recovery will be back .
any way, you can root in any method you want.
why you want to flash custom recovery without rooting??
once you flashed anything unofficial with odin, the counter is triggered.
yes you can reset it with triangle away.
Click to expand...
Click to collapse
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
King Canute said:
Ok I tried to flash the clockworkmod without checking the auto-reboot and it worked like you said.
The reason I don't want to root the phone is, because I actually don't need it, never had any use of it on other phones.
Ok then I have to root it like you said to make i work properly.
Click to expand...
Click to collapse
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
I was thinking about installing Cyanogenmod ROM or maybe later Google Android 4.3.
So now I need to root the phone.
samersh72 said:
hmmm, so why you need cwm?
EDIT: usually these 2 files (that reflash stock recovery) come with some OTA update. So if you dont want to root, you can flash a stock firmware with odin (those 2 files are not included) in order to flash custom recovery without rooting.
any way, when you flashed custom recovery, your binary counter is triggered. so you need triangle away to reset it for warranty ====> you need root access!
Click to expand...
Click to collapse
Triangle Away wan't work if you have custom kernel OR recovery !
Mittaa said:
Triangle Away wan't work if you have custom kernel OR recovery !
Click to expand...
Click to collapse
yes i know and he supposed to read or already red TA thread to know that
Hello,
Tried to root my note 3 4.4.2 N9005XXUENA6
i used odin3.07 with CF-Auto-Root-hlte-hltexx-smn9005
But ti will not boot in any way and as stated by Mr. Chainfire
"NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process."
it won't boot.(stays in a loop ? )
Flashing back to N9005XXUENA6 is no problem and then it is working properly
http://forum.xda-developers.com/showthread.php?t=2466423
Any ideas? Thanks in advance
wiebew said:
Hello,
Tried to root my note 3 4.4.2 N9005XXUENA6
i used odin3.07 with CF-Auto-Root-hlte-hltexx-smn9005
But ti will not boot in any way and as stated by Mr. Chainfire
"NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process."
it won't boot.(stays in a loop ? )
Flashing back to N9005XXUENA6 is no problem and then it is working properly
http://forum.xda-developers.com/showthread.php?t=2466423
Any ideas? Thanks in advance
Click to expand...
Click to collapse
Reflash the latest CF and it should be OK, sounds like you're using the older one.
radicalisto said:
Reflash the latest CF and it should be OK, sounds like you're using the older one.
Click to expand...
Click to collapse
I am sorry , but not yet familiar with this, just starting to get the hold of it, but i don't know where to find the CF which is newer.
wiebew said:
I am sorry , but not yet familiar with this, just starting to get the hold of it, but i don't know where to find the CF which is newer.
Click to expand...
Click to collapse
Here you go :good:
radicalisto said:
Here you go :good:
Click to expand...
Click to collapse
Thanks again, but this CF is the one , i am using already.
is it possible i have to enable usb debugging ?
wiebew said:
Thanks again, but this CF is the one , i am using already.
is it possible i have to enable usb debugging ?
Click to expand...
Click to collapse
I owe you an apology, thank you very much, it works right now,
only looked at the title of the CF and not looked at the difference in the file size
Thanks again !
Do i also need to flash the CWM file ?
wiebew said:
I owe you an apology, thank you very much, it works right now,
only looked at the title of the CF and not looked at the difference in the file size
Thanks again !
Do i also need to flash the CWM file ?
Click to expand...
Click to collapse
If you wish to flash a custom rom you can get the latest CWM .6 rls or the latest TWRP
radicalisto said:
If you wish to flash a custom rom you can get the latest CWM .6 rls or the latest TWRP
Click to expand...
Click to collapse
ok, in that case, i will wait, first I have to give my heart a bit of peace, after this nerve wracking journey
( was the first time itried, but certainly not the last)
Have a nice weekend
I have decided to try and root my galaxy s using the Cf auto-root method and my phone is now soft bricked. I am stuck in the "Recovery booting" screen. The only thing I can do is stay here and turn off the phone and enter download mode. Any advice or solutions would be greatly appreciated.
slashgtaul said:
I have decided to try and root my galaxy s using the Cf auto-root method and my phone is now soft bricked. I am stuck in the "Recovery booting" screen. The only thing I can do is stay here and turn off the phone and enter download mode. Any advice or solutions would be greatly appreciated.
Click to expand...
Click to collapse
I would install a recovery, twrp or cwm, use that tar. File and install it with odin as well.
SM-G900W8, 0x1
ragz said:
I would install a recovery, twrp or cwm, use that tar. File and install it with odin as well.
SM-G900W8, 0x1
Click to expand...
Click to collapse
the problem is, i dont think the root happened since i never got past the screen i am stuck on. it just stuck there in the middle of the process. will twrp recovery work if i am not rooted?
slashgtaul said:
the problem is, i dont think the root happened since i never got past the screen i am stuck on. it just stuck there in the middle of the process. will twrp recovery work if i am not rooted?
Click to expand...
Click to collapse
I just tried it and it failed.
slashgtaul said:
I just tried it and it failed.
Click to expand...
Click to collapse
What model of phone do you have? Did you get cf-root from here.
http://autoroot.chainfire.eu/#odin
SM-G900W8, 0x1
slashgtaul said:
the problem is, i dont think the root happened since i never got past the screen i am stuck on. it just stuck there in the middle of the process. will twrp recovery work if i am not rooted?
Click to expand...
Click to collapse
do you know where i can find the stock firmware? every site i have found is junk. its the sm g900p from sprint.
slashgtaul said:
do you know where i can find the stock firmware? every site i have found is junk. its the sm g900p from sprint.
Click to expand...
Click to collapse
Have you tried sammobile. Com, try redownloading the cf-root file
.
Check out this thread it may help,
http://forum.xda-developers.com/showthread.php?p=57091166
SM-G900W8, 0x1
Try reflashing the stock firmware for your device.
vndnguyen said:
Try reflashing the stock firmware for your device.
Click to expand...
Click to collapse
I want to reflash the stock firmaware but cannot find any download for it.
slashgtaul said:
I want to reflash the stock firmaware but cannot find any download for it.
Click to expand...
Click to collapse
Try, sammobile. Com ,I would post a link but not allowed on xda.
SM-G900W8, 0x1
ragz said:
Try, sammobile. Com ,I would post a link but not allowed on xda.
SM-G900W8, 0x1
Click to expand...
Click to collapse
thanks for the help guys, i finally got it with a twrp recovery.
slashgtaul said:
I want to reflash the stock firmaware but cannot find any download for it.
Click to expand...
Click to collapse
This tool will show the firmware exactly for your device: Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
Hi, kind of a NOOOB here! want to root my S5
Tried flashing with openrecovery-twrp-2.8.5.0-gt-klte and philz_touch_6.26.2-klte.tar
and i still get the stock recovery!
included a screenshot about my device.
This may be a dumb question, but you are using Odin, correct? And what version? On a Mac or PC?
metalfan78 said:
This may be a dumb question, but you are using Odin, correct? And what version? On a Mac or PC?
Click to expand...
Click to collapse
Hi! yes i am using Odin 3.10.6 and a PC Windows 7
I'm not familiar with other versions of the s5, are you 8s9ng the correct recovery file? Which slot are you putting it in?it should go into AP, if I remember correctly.
Hi! Far as i know i use The correct file, do you maybe have a Link to one?
Yeah i check The AP then use The file i downloaded then click start, The flashing process passes but still stock recovery...
Sent from my SM-G900F using XDA Free mobile app
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
*Detection* said:
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Click to expand...
Click to collapse
Hmm, so if i get this correct i download CF Auto Root and flash that via Odin and then dowloand this app you menationed and then flash thru that so i have twrp? i that case do you maybe have a link where i could download CF Auto Root ?
Tanks, appreciate it =)
uffis88 said:
Hmm, so if i get this correct i download CF Auto Root and flash that via Odin and then dowloand this app you menationed and then flash thru that so i have twrp? i that case do you maybe have a link where i could download CF Auto Root ?
Tanks, appreciate it =)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2696537
There you go
VfBStuttgart27 said:
http://forum.xda-developers.com/showthread.php?t=2696537
There you go
Click to expand...
Click to collapse
Thanks i will give it a try, its a little bit more to do as i see
*Detection* said:
I ran into the same problem, flashed TWRP 3 times and KNOX remained 0x0 and recovery remained stock
Ended up having to use CF Auto Root to gain root, then use TWRP Manager to flash TWRP
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
Click to expand...
Click to collapse
Btw, did u have the sam baseband when encountering this problem? read that some ppl have issues with this.
uffis88 said:
Btw, did u have the sam baseband when encountering this problem? read that some ppl have issues with this.
Click to expand...
Click to collapse
Yea flash CF Auto Root via ODIN, then install that TWRP app and the app itself will flash TWRP for you
I was running stock BOB7 when I tried to flash TWRP
*Detection* said:
Yea flash CF Auto Root via ODIN, then install that TWRP app and the app itself will flash TWRP for you
I was running stock BOB7 when I tried to flash TWRP
Click to expand...
Click to collapse
thanks mate! everything worked like a charm, i have a rooted s5 now =)
any tips on some ROM that is good?
tried to install twrp from app.. got the "software not authorized..." message.. tried to boot from download mode as others have suggested but still recieve "software not authorized..." message..
phone was loki`ed from begining and never took at&t updates. in odin 3.09 phone shows as a com..
is there anything i can do to bring this phone back to life??
If the bootloader isn't locked, flash a stock rom from sammobile.com.
audit13 said:
If the bootloader isn't locked, flash a stock rom from sammobile.com.
Click to expand...
Click to collapse
thanks for your response... holding the up-volume and power only results with the same "not authorized" screen.. also adb does not list it as a device but odin does add it..
Download mode is power and volume down.
audit13 said:
Download mode is power and volume down.
Click to expand...
Click to collapse
sorry confused it with recovery.. the file from sammobile will leave 100% stock?? also whch of the 2 files mdl is the newest of the two
will i need to start over like in http://forum.xda-developers.com/showthread.php?t=2297900 ??
Just flash the stock rom in Odin and perform a factory wipe before booting the stock rom for the first time.
audit13 said:
Just flash the stock rom in Odin and perform a factory wipe before booting the stock rom for the first time.
Click to expand...
Click to collapse
well that worked brilliantly. what should i use to get twrp and root back?
You can use Odin to flash twrp and root with an unlocked bootloader.
Twrp: https://dl.twrp.me/jflteatt/
Flash SuperSU from twrp: http://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
dook13 said:
well that worked brilliantly. what should i use to get twrp and root back?
Click to expand...
Click to collapse
Towel root works with the MDL bootloader for rooting. Can't tell you how to get TWRP, I use CWM on my at&t S4.
StoneyJSG said:
Towel root works with the MDL bootloader for rooting. Can't tell you how to get TWRP, I use CWM on my at&t S4.
Click to expand...
Click to collapse
i just used the CASUAL app i linked earlier.. it worked to get root and installed twrp..
now i'm looking for a decent rom to install.. all the ones i used to use aren't supported any longer..
I hear Thor ROM and Golden eye ROM are nice and fast TW roms. For non touch wiz there is probably an CM or AOSP rom out there somewhere.