Hi Guys
Could really use some help here, thought it was about time that I rooted my Note 3, I am using a SM-n9005 and was on 4.3 to start.
I followed some instructions using Odin and CF-autoroot, all went well even had a pass! in the Odin screen but now I am stuck on the loading screen with the following error messages in the left hand corner:
Recovery booting....(in blue)
Recovery is not seandroid enforcing (in red)
Set warranty bit : recovery (in yellow)
Can anyone shed some light on this ? what have I done wrong here and how can I fix it ?
Thank you
colobos said:
Hi Guys
Could really use some help here, thought it was about time that I rooted my Note 3, I am using a SM-n9005 and was on 4.3 to start.
I followed some instructions using Odin and CF-autoroot, all went well even had a pass! in the Odin screen but now I am stuck on the loading screen with the following error messages in the left hand corner:
Recovery booting....(in blue)
Recovery is not seandroid enforcing (in red)
Set warranty bit : recovery (in yellow)
Can anyone shed some light on this ? what have I done wrong here and how can I fix it ?
Thank you
Click to expand...
Click to collapse
I think you used wrong cf autoroot you might downloaded the 4.4 kitkat version
meawww said:
I think you used wrong cf autoroot you might downloaded the 4.4 kitkat version
Click to expand...
Click to collapse
Thank you I managed to figure it out and you was right I was being a bit of a moron .....
Related
Hello guys, I've read about knox and now I get how it works and all, warranty isn't an issue for me (long story) so now I have the new bootloader flagged 0x1, now my question is whenever I boot into recovery or into OS I'm greeted with "set warranty bit : recovery/kernel" and "recover/kernel is not seandroid enforcing", I also kind of understand that this is related to knox bootloader but is it something I should worry about? Will flashing different roms/kernels now that I'm on the new bootloader mess up anything other than the already flagged 0x1? Thanks.
reckoner_85 said:
Hello guys, I've read about knox and now I get how it works and all, warranty isn't an issue for me (long story) so now I have the new bootloader flagged 0x1, now my question is whenever I boot into recovery or into OS I'm greeted with "set warranty bit : recovery/kernel" and "recover/kernel is not seandroid enforcing", I also kind of understand that this is related to knox bootloader but is it something I should worry about? Will flashing different roms/kernels now that I'm on the new bootloader mess up anything other than the already flagged 0x1? Thanks.
Click to expand...
Click to collapse
No, it's nothing to worry about at all, just ignore it
Or when booting to recovery go a bit cross eyed and enjoy a funky rainbow effect, it's amazing
Obagleyfreer said:
No, it's nothing to worry about at all, just ignore it
Or when booting to recovery go a bit cross eyed and enjoy a funky rainbow effect, it's amazing
Click to expand...
Click to collapse
haha I will definitely try that.
reckoner_85 said:
haha I will definitely try that.
Click to expand...
Click to collapse
how do u bypass the error? I want to use 4.4
Obagleyfreer said:
No, it's nothing to worry about at all, just ignore it
Or when booting to recovery go a bit cross eyed and enjoy a funky rainbow effect, it's amazing
Click to expand...
Click to collapse
i kinda have the same issue, only i dont have video/audio, and wifi....and ideas?
Help
Hy i have big problem
I try to root Galaxy s4 and all is fine but when i turn on phone he say
"kernel is not seandroid enforcing"
and this is all
Please help me how to fix this
Thanks
martin93612 said:
Hy i have big problem
I try to root Galaxy s4 and all is fine but when i turn on phone he say
"kernel is not seandroid enforcing"
and this is all
Please help me how to fix this
Thanks
Click to expand...
Click to collapse
This appears coz u changed the STOCK kernel. The unique way to solve this is installing STOCK ROM again :good:
Can you send me where i can fnde to dowload stock ROM and i can't enter in CWM to instal can this instal from ODIN?
Thank you
martin93612 said:
Can you send me where i can fnde to dowload stock ROM and i can't enter in CWM to instal can this instal from ODIN?
Thank you
Click to expand...
Click to collapse
Check the Back to Stock link in my signature! Any queries direct to that thread:good:
Thanks finaly my phone working
Thank you :victory:
Obagleyfreer said:
No, it's nothing to worry about at all, just ignore it
Or when booting to recovery go a bit cross eyed and enjoy a funky rainbow effect, it's amazing
Click to expand...
Click to collapse
Laughed loud. Just wanted to let you know.
Please Help! Ive been searching all day yesterday to fix my phone
So i wanted to be updated so i downloaded mf9 and mja and all the kernels or whatever and installed them and was on stock non rooted rom for a while, yesterday i wanted to install sacs custom rom so i downloaded the newest one and flashed via twrp, but now all that happens is i get a message saying "Kernel is not seandroid enforcing" in red "Set warrenty Bit: Kernel" in yellow, I cannot flash anything via odin except philz recovery so i have that on there but i tried to install the stock firmware through odin and everything fails. I even changed usb cords, took out the .md5 extension, plugged the usb cord directly to the motherboard instead of using the front usb which that allowed me to flash philz recovery but i just want a working phone, no rom is working and I cant install any roms please help i need my phone back! Thanks, Chris
Same here :/
chriscolby7 said:
So i wanted to be updated so i downloaded mf9 and mja and all the kernels or whatever and installed them and was on stock non rooted rom for a while, yesterday i wanted to install sacs custom rom so i downloaded the newest one and flashed via twrp, but now all that happens is i get a message saying "Kernel is not seandroid enforcing" in red "Set warrenty Bit: Kernel" in yellow, I cannot flash anything via odin except philz recovery so i have that on there but i tried to install the stock firmware through odin and everything fails. I even changed usb cords, took out the .md5 extension, plugged the usb cord directly to the motherboard instead of using the front usb which that allowed me to flash philz recovery but i just want a working phone, no rom is working and I cant install any roms please help i need my phone back! Thanks, Chris
Click to expand...
Click to collapse
I am having the same issue as you Chris, I'm on the sprint galaxy s4 and i get those same errors and get stuck on a black screen with the blue led illuminated on the top, I can access recovery and download mode. I hope we get some help soon
Stock
Joku1981 said:
This appears coz u changed the STOCK kernel. The unique way to solve this is installing STOCK ROM again :good:
Click to expand...
Click to collapse
But I can't go to recovery/download mode. How can I installing STOCK ROM?
Is there a way to bypass the error?
same problem here. gets stuck at the samsung galaxy s4 spash screen
Obagleyfreer said:
No, it's nothing to worry about at all, just ignore it
Or when booting to recovery go a bit cross eyed and enjoy a funky rainbow effect, it's amazing
Click to expand...
Click to collapse
but gamekiller not working fine..
Here is the Solution
reckoner_85 said:
Hello guys, I've read about knox and now I get how it works and all, warranty isn't an issue for me (long story) so now I have the new bootloader flagged 0x1, now my question is whenever I boot into recovery or into OS I'm greeted with "set warranty bit : recovery/kernel" and "recover/kernel is not seandroid enforcing", I also kind of understand that this is related to knox bootloader but is it something I should worry about? Will flashing different roms/kernels now that I'm on the new bootloader mess up anything other than the already flagged 0x1? Thanks.
Click to expand...
Click to collapse
All Right I have the solution for you! I was lucky enough to find someone that knew how to fix this (Damageless) so here is what you need to do.
-Take out the battery and disconnect from computer
-Put battery back in and hold down Vol(down) and home key, then hold power button until it vibrates. Release only the power button after it vibrates.
-You should now be in the download mode, click Vol(up) to continue.
-Download Odin here: odindownload .com
-Download stock ROM here: (dont open click save) sammobile .com and (yes you have to create an account I'm sorry) search for your model number, ex. SM-N900t for tmobile note 3
-install Odin
-check the PDA box not phone and click PDA
-find the stock ROM in your downloads and select that one.
-hit Start and you should be back to normal
It will erase everything you had on your phone which sucks I know but at least your phone works! Good luck! Hope this helps!
Wroclaw7
i have same problem them flash carbon rom and works...
martin93612 said:
Can you send me where i can fnde to dowload stock ROM and i can't enter in CWM to instal can this instal from ODIN?
Thank you
Click to expand...
Click to collapse
You can get all stock firmwares from SamMobile : http://www.sammobile.com/firmwares/
Let me know if you need help with the flashing process.
THANK YOU
THANK YOU THANK YOU I found this post and it restored my phone back to stock!!!!
the only thing I can add to this is use the original cable that came with the phone I was using an aftermarket one and was getting error after error .
I've rushed into trying to root my Galaxy S4, but used the wrong process. I have a GT I9505 and used the SCH-I545 pre-release kernel making it stick after the samsung screen.
It has a blue light in top corner, I've removed battery and put it back in and when I try to turn it on in top left it says;
KERNEL IS NOT SEANDROID ENFORCING
Set warranty bit: kernel
I'm about to finish downloading the STOCK rom, going to flash that via ODIN and wipe through recovery mode. Hoping this works.
Please help! At this point I would like to get my phone back to normal or root it properly. Thanks
I can get into recovery and download mode. UK phone, It's on vodafone network I'm unsure if it's locked or not I haven't done anything.,
Help is appreciated!
Ripebear said:
I've rushed into trying to root my Galaxy S4, but used the wrong process. I have a GT I9505 and used the SCH-I545 pre-release kernel making it stick after the samsung screen.
It has a blue light in top corner, I've removed battery and put it back in and when I try to turn it on in top left it says;
KERNEL IS NOT SEANDROID ENFORCING
Set warranty bit: kernel
I'm about to finish downloading the STOCK rom, going to flash that via ODIN and wipe through recovery mode. Hoping this works.
Please help! At this point I would like to get my phone back to normal or root it properly. Thanks
I can get into recovery and download mode. UK phone, It's on vodafone network I'm unsure if it's locked or not I haven't done anything.,
Help is appreciated!
Click to expand...
Click to collapse
I also have this problem after i flashed the stock ROM via ODIN and now i cant use Wi-Fi or Sound. I'm scouring the internet for a SGH I337M Kernal as the one i got from samsung crashes ODIN. But that error came for me to the phone should still work but without Sound and WiFi. but if anyone finds a solutuion to this that would be great
Just flash stock and the warning will disappear. It only states that you do not use the Samsung kernel.
Other possibility is just flash an other kernel that does work for ure phone. The warning will remain but it's nothing to worry about
Verstuurd vanaf mijn GT-I9505 met Tapatalk
---------- Post added at 08:09 PM ---------- Previous post was at 08:02 PM ----------
Ripebear said:
I've rushed into trying to root my Galaxy S4, but used the wrong process. I have a GT I9505 and used the SCH-I545 pre-release kernel making it stick after the samsung screen.
It has a blue light in top corner, I've removed battery and put it back in and when I try to turn it on in top left it says;
KERNEL IS NOT SEANDROID ENFORCING
Set warranty bit: kernel
I'm about to finish downloading the STOCK rom, going to flash that via ODIN and wipe through recovery mode. Hoping this works.
Please help! At this point I would like to get my phone back to normal or root it properly. Thanks
I can get into recovery and download mode. UK phone, It's on vodafone network I'm unsure if it's locked or not I haven't done anything.,
Help is appreciated!
Click to expand...
Click to collapse
If you flash stock and you want your phone rooted afterwards just download cf auto root for your phone and flash it trough odin. This does nothing else to your phone than rooting it. I'm not allowed to post links but I'll sent you a pm with the link of the correct cf auto root file.
Ripebear said:
I've rushed into trying to root my Galaxy S4, but used the wrong process. I have a GT I9505 and used the SCH-I545 pre-release kernel making it stick after the samsung screen.
It has a blue light in top corner, I've removed battery and put it back in and when I try to turn it on in top left it says;
KERNEL IS NOT SEANDROID ENFORCING
Set warranty bit: kernel
I'm about to finish downloading the STOCK rom, going to flash that via ODIN and wipe through recovery mode. Hoping this works.
Please help! At this point I would like to get my phone back to normal or root it properly. Thanks
I can get into recovery and download mode. UK phone, It's on vodafone network I'm unsure if it's locked or not I haven't done anything.,
Help is appreciated!
Click to expand...
Click to collapse
Verstuurd vanaf mijn GT-I9505 met Tapatalk
Ripebear said:
I've rushed into trying to root my Galaxy S4, but used the wrong process. I have a GT I9505 and used the SCH-I545 pre-release kernel making it stick after the samsung screen.
It has a blue light in top corner, I've removed battery and put it back in and when I try to turn it on in top left it says;
KERNEL IS NOT SEANDROID ENFORCING
Set warranty bit: kernel
I'm about to finish downloading the STOCK rom, going to flash that via ODIN and wipe through recovery mode. Hoping this works.
Please help! At this point I would like to get my phone back to normal or root it properly. Thanks
I can get into recovery and download mode. UK phone, It's on vodafone network I'm unsure if it's locked or not I haven't done anything.,
Help is appreciated!
Click to expand...
Click to collapse
You're posting in the wrong forum, this is the forum for the S4 Active (i9295).
Hello guys,
i have the following problem:
I have tried rooting my SM-N9005 International version running Android 4.3.But every time i try to flash CF-AutoRoot it reboots and i see the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and it's just stucked i flashed back the stock firmware XXUDMJ7.It's there some other way to root my phone or is there something wrong that i do ? i flashed with ODIN 3.07.If you need some other info about my phone i will tell you what you need ! Thank you very much !!
ClimbersTeam said:
Hello guys,
i have the following problem:
I have tried rooting my SM-N9005 International version running Android 4.3.But every time i try to flash CF-AutoRoot it reboots and i see the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and it's just stucked i flashed back the stock firmware XXUDMJ7.It's there some other way to root my phone or is there something wrong that i do ? i flashed with ODIN 3.07.If you need some other info about my phone i will tell you what you need ! Thank you very much !!
Click to expand...
Click to collapse
SEandroid line is normal, as for it not working, you can either take the battery out for 30seconds then reboot OR you have used the KK version of CF-Autoroot (latest is Kitkat)
ClimbersTeam said:
Hello guys,
i have the following problem:
I have tried rooting my SM-N9005 International version running Android 4.3.But every time i try to flash CF-AutoRoot it reboots and i see the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and it's just stucked i flashed back the stock firmware XXUDMJ7.It's there some other way to root my phone or is there something wrong that i do ? i flashed with ODIN 3.07.If you need some other info about my phone i will tell you what you need ! Thank you very much !!
Click to expand...
Click to collapse
Try odin 1.85
radicalisto said:
SEandroid line is normal, as for it not working, you can either take the battery out for 30seconds then reboot OR you have used the KK version of CF-Autoroot (latest is Kitkat)
Click to expand...
Click to collapse
Yeah you are right i was using the KK version i haven't notice in the thread of Chainfire that there was a download for 4.3 ! Thank you ! Cheers
I got same problem
Please I encountered exactly the same problem yesterday...
I tried rooting with auto root my Samsung note 3 sm-n9005 rebooted and stopped at Samsung logo, displaying
'RECOVERY BOOTING....
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery' at the top...
What do I do... I can't find autoroot for Android 4.3 on chainfire and I don't know where to find the stock rom...
The phone boots to it menu if I reinsert the battery but I still need to root...
pls help...
---------- Post added at 11:23 PM ---------- Previous post was at 11:17 PM ----------
ClimbersTeam said:
Yeah you are right i was using the KK version i haven't notice in the thread of Chainfire that there was a download for 4.3 ! Thank you ! Cheers
Click to expand...
Click to collapse
Pls can you give me the link to the download for 4.3? and do I need to flash stock before trying to root again?
I AM DYING HERE GOD KNOWS WHY I CANT ROOT MY PHONE. I AM RUNNING STOCK 4.3 JELLY BEAN ON MY SM-N9005 NOTE 3. I FOUND THE 4.3 JELLY BEAN CF AUTO ROOT AND WHEN I FLASH IT ALL IS FINE UNTILL THE END, ODIN JUST STOPS AND ON MY PHONE IN YELLOW WRITEING IS SOMETHING ABOUT THE CACHE. I THEN HOLD VOLUME DOWN, HOME AND POWER BUTTON GO BACK INTO DOWNLOAD MODE AND FLASH IT AGAIN. IT FLASHES AND REBOOTS AND i see the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and it's just STUCK ON THAT SCREEN. BUT THATS WHEN I WAS FLASHING THE KK CF AUTO ROOT, WHEN I FLASH THE 4.3 JELLY BEAN SAME THING HAPPENS BUT AFTER THE SECOND FLASH I STILL GET the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and AFTER 10 SECONDS THE LITTLE RED ANDROID MAN APPEARS AND PHONE ROOTS.. I THEN INSTALLED PHILZ RECOVERY AND WHEN I BOOT INTO RECOVERY AGAIN i see the logo of Samsung Galaxy Note 3 SM-N9005 and in the upper left corner on the first line it says RECOVERY BOOTING underneath it says something that there is a error with SEANDROID and underneath it says set version bit:recovery and NOW IT IS JUST STUCK. I HAVE TO FLASH STOCK 4.3 JELLY BEAN TO GET MY PHONE BACK. CAN SOMEBODY HELP PLEASE
Did u choose the correct version of CFautoroot for 4.3?
Sent from N7105, DN3 with AGNi kernel.
antique_sonic said:
Did u choose the correct version of CFautoroot for 4.3?
Sent from N7105, DN3 with AGNi kernel.
Click to expand...
Click to collapse
CORRECT VERSION? I down loaded the sm-n9005 4.3 jelly bean version. ill take another look now but if thiers different versions can you plz post the link so I can have a look. thanks
this is whats on chainfires thread :
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
shotgun1976 said:
CORRECT VERSION? I down loaded the sm-n9005 4.3 jelly bean version. ill take another look now but if thiers different versions can you plz post the link so I can have a look. thanks
this is whats on chainfires thread :
SM-N9005 (International Qualcomm): CF-Auto-Root-hlte-hltexx-smn9005.zip
(only works on 4.4 bootloaders, if you're still on 4.3 use the old version which you can find here: http://d-h.st/J32)
Click to expand...
Click to collapse
No need to caps all the letter, makes me hard to read. Btw did you try odin attached on the CFAuto root and dont click auto reboot?
IzArsha said:
No need to caps all the letter, makes me hard to read. Btw did you try odin attached on the CFAuto root and dont click auto reboot?
Click to expand...
Click to collapse
does not give me the option. I just tried again the bar in odin goes to the end but on my phone stops half way and in yellow writing under the knox crap says SET WARRANTY BIT : CACHE I don't have a clue???????
see I just booted back into download mode, flashed it again and it worked, but on the galaxy sm-n9005 screen had the writeing at the top left for bout 10 seconds then it rooted. but if I reboot or try boot into recovery it will freeze on that screen. man im tripping don't know what else to do?????
shotgun1976 said:
does not give me the option. I just tried again the bar in odin goes to the end but on my phone stops half way and in yellow writing under the knox crap says SET WARRANTY BIT : CACHE I don't have a clue???????
Click to expand...
Click to collapse
Try different usb port and make sure you have samsung driver installed. Try it again and flash with the provided odin on cfautoroot. If it failed, then i have no idea
EDIT: BTW you said you installed philz? are you sure you installed the correct version of Philz? please do search again.
IzArsha said:
Try different usb port and make sure you have samsung driver installed. Try it again and flash with the provided odin on cfautoroot. If it failed, then i have no idea
EDIT: BTW you said you installed philz? are you sure you installed the correct version of Philz? please do search again.
Click to expand...
Click to collapse
I give up gonna install kit kat. wish me luck
Hi.
Yesterday I root my device with CF-Auto Root and flash a new recovery, Philz Touch. Now everytime I turn on my device, on the boot screen appears two lines, one red and other yellow, they say " Kernel is not seandroid enforcing " and " set warranty bit: kernel ".
Can someone help me how to remove this two lines every time I turn on or restart my device??? Really I don't like....
My phone is Galaxy S4 GT-i9505 LTE.
Thanks in advance.
Someone.... please...
It's normal. If you don't like it you need to unroot.
ferrarinews said:
Hi.
Yesterday I root my device with CF-Auto Root and flash a new recovery, Philz Touch. Now everytime I turn on my device, on the boot screen appears two lines, one red and other yellow, they say " Kernel is not seandroid enforcing " and " set warranty bit: kernel ".
Can someone help me how to remove this two lines every time I turn on or restart my device??? Really I don't like....
My phone is Galaxy S4 GT-i9505 LTE.
Thanks in advance.
Click to expand...
Click to collapse
That's what always appears when using a custom ROM. Also, check wether your Know hasn't been tripped.
emperorHadrian said:
That's what always appears when using a custom ROM. Also, check wether your Know hasn't been tripped.
Click to expand...
Click to collapse
I have a I9505G LTE with Cyanogenmod installed/rooted. I don't get those lines on reboot.
dratsablive said:
I have a I9505G LTE with Cyanogenmod installed/rooted. I don't get those lines on reboot.
Click to expand...
Click to collapse
Is your Knox tripped or not? It may have something to do with it...
emperorHadrian said:
Is your Knox tripped or not? It may have something to do with it...
Click to expand...
Click to collapse
Its a Knox thing. Not a root thing.
That would explain it. My phone was from Google Play and doesn't have Knox.