Hi
I install ML2 4.3 (XSP) singapore official on my n9005 , 2 weeks ago ....
but now , when i connect my phone to kies ... kies show me : your firmware cannot update via kies!!! and show me in Parenthesis XTC , but i flash XSP on my phone why???
it means that i can not update OTA ?? or i can just update with WiFi???
many thanks ...
persiansoftware said:
Hi
I install ML2 4.3 (XSP) singapore official on my n9005 , 2 weeks ago ....
but now , when i connect my phone to kies ... kies show me : your firmware cannot update via kies!!! and show me in Parenthesis XTC , but i flash XSP on my phone why???
it means that i can not update OTA ?? or i can just update with WiFi???
many thanks ...
Click to expand...
Click to collapse
What region are you in? -- if you flashed a region you are not in, of course KIES won't work as it's not for your country.
radicalisto said:
What region are you in? -- if you flashed a region you are not in, of course KIES won't work as it's not for your country.
Click to expand...
Click to collapse
Im in iran
wifi update also not work? yes?
but i flash XSP ... but now show the XTC!!!
Why?
persiansoftware said:
Im in iran
wifi update also not work? yes?
but i flash XSP ... but now show the XTC!!!
Why?
Click to expand...
Click to collapse
Dial *#1234# in your keypad and post the output
radicalisto said:
Dial *#1234# in your keypad and post the output
Click to expand...
Click to collapse
AP: N9005XXUDML2
CP: N9005XXUDMJ7
CSC: N9005OLBDMK2
many thanks
persiansoftware said:
AP: N9005XXUDML2
CP: N9005XXUDMJ7
CSC: N9005OLBDMK2
many thanks
Click to expand...
Click to collapse
XTC shown in your KIES should be your version (So I believe) You have flashed a different region, so KIES and OTA won't work for your region at least, the OTA update will come from the region you flashed (in your case Singapore) However if you're rooted etc, you won't be able to receive the OTA update and you'll have to manually download it. I wouldn't worry right now, wait for KK to roll out properly then switch.
radicalisto said:
XTC shown in your KIES should be your version (So I believe) You have flashed a different region, so KIES and OTA won't work for your region at least, the OTA update will come from the region you flashed (in your case Singapore) However if you're rooted etc, you won't be able to receive the OTA update and you'll have to manually download it. I wouldn't worry right now, wait for KK to roll out properly then switch.
Click to expand...
Click to collapse
Thanks... but im not rooted... now can i receive OTA update??
I attach my kies snapshot ....
please tell me about , can i receive OTA updates? or not?
persiansoftware said:
Thanks... but im not rooted... now can i receive OTA update??
I attach my kies snapshot ....
please tell me about , can i receive OTA updates? or not?
Click to expand...
Click to collapse
is here any solution for this problem??
can i receive OTA updates via wireless ?
Related
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Meyhemg said:
Hi everyone
I wanted to ask you a question.
In short: Are Kies and OTA are connected? I mean if Kies reports it doesn't support my firmware so I won't get OTAs too?
Detailed: I flashed two weeks ago the German stock rom DBT for I9505 (MJ5).
The reason I did that is because I couldn't get updates via Kies with the last firmware, I had:
PDA: ME2, PHONE: ME2, CSC: MDB(BTU)
I understood ME2 stands for Nordic countries and the product code (BTU) is for England so I couldn't get updates through Kies.
I flashed the German stock rom via Odin and all went OK but afterwards when I connected the device to Kies I still had BTU in CSC:
PDA: MJ5, PHONE: MJ5, CSC: MJ5(BTU)
My question is why is it like that? Wasn't the CSC supposed to change to DBT?
And so the main question: Will this interfere me to get OTA updates from Germany when they will be out? Because Kies still keeps saying that it doesn't support my firmware.
Thanks in advance
Click to expand...
Click to collapse
After flashing MJ5 you made root, right?
jaswinky said:
After flashing MJ5 you made root, right?
Click to expand...
Click to collapse
No, I didn't root it and didn't do anything. So why?
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I have the same, cant go back to XEF
a40 said:
I have the same, cant go back to XEF
Click to expand...
Click to collapse
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Meyhemg said:
So my question is will I be able to get OTA with that CSC doesn't match PDA and PHONE?
Click to expand...
Click to collapse
No we need same pda and csc...
Meyhemg said:
No, I didn't root it and didn't do anything. So why?
Click to expand...
Click to collapse
I mean, when I updated to JB4.3 from 4.2.2 and rooted my phone, The knox counter incresed to 0x1; this was the reason I allways have thought OTA and kies updates notifications will never work again.
Anyway, In my case I can no more update by OTA or kies because I rooted the phone in 4.3 (or better, because of the knox counter increasing), but for buckups and so on I can use it normally, except I had to download kies version 3, the only kies version compatible with S4 JB 4.3, maybe you still have kies version 2.
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
bogart26 said:
Good day, my I9505 won't update to 4.3 via OTA. Still stuck to 4.2.2
i dont know what's causing this problem. Im from south east asia and 4.3 update was released last year. checked my devices if it's rooted, installed root checker *deivice does not have proper root access*. How can i tell my device if it's rooted or not? Can you tell me what's causing this problem? Is it region locked? Newbie here.
Pls help! Thanks!
Click to expand...
Click to collapse
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
JohnnyInBriz said:
Try using Kies PC software to update. It will let you know if your phone has been modified and refuse to update
Click to expand...
Click to collapse
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
i don't have any knowledge on rooting a phone.
bogart26 said:
thanks for the reply. Used Kies and this message showed up " Your device's current firmware version is not supported to update firmrware via Kies" CURRENT FIRMWARE VERSION: PDA: MEA/ PHONE: MEA/ CSC: MEA(DBT)
searched the version of my phone here is the list:
AP: I9505XXUBMEA
CP: I9505XXUBMEA
CSC: I9505OXABMEA
my device status is Official...
is there any conflict on the version of my phone? actually Im the 2nd owner of the phone, don't know what the 1st owner did to it (modification or anything...) and where the phone came from. MANY THANKS!
Click to expand...
Click to collapse
It came from germany so feel free to download the file from here ,But the best thing you can do is flash a pre-rooted 4.2.2 rom man then flash any 4.3 custom rom you like just to avoid that Knox Warranty Void , so incase you got a problem later you can just go back to 4.2.2 but this is up to you.
Repulsa said:
It came from germany
thanks! so if my phone came from Germany, there is no way I cant update my phone via OTA and Kies because now the phone is now in Philippines? pls enlighten me on this.
I have no knowledge on flashing nor rooting a phone, can you give me step by step instructions? or is there any other way to update my phone officially? (requires no rooting or flashing) THANKS!
Click to expand...
Click to collapse
Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
juzzy16 said:
Hi. Just a bit confused about my CSC. Currently my phone is on AP: I9505XXUEMKF with CSC: I9505BTUEMK5. As far as I was aware, this is an unbranded CSC for the UK and Ireland? (I am in Ireland). Now my phone was locked to a network but I got it unlocked and the CSC is now this. According to Sammobile, the latest firmware for BTU is I9505XXUENAA but when I connect my phone to kies, it says i have the latest update? Am I missing something big here?
Click to expand...
Click to collapse
1. The CSC appears close to ur firmware in Kies 3. Like in the 1st pic the CSC is XEU.
2. I9505XXUENAA no is an official update recognized by Kies how u can see in the 2nd pic. Kies 3 recognize that u have the latest update installed. If you want update ur phone by Kies you will have to wait new official update or u will have to use ODIN for install I9505XXUENAA otherways (SamMobile).
I tried that csc the other night, and it loads the Austria/Switzerland stuff on my phone by default......very useful here in the uk.
There is option to select uk/btu but it resets the phone, so Im not spending 3 hours setting up my phone.
Oh, and the mobile data speed seems so crap on that modem compared to mk9....
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
juzzy16 said:
Thanks for your reply. Do you know whether unbranded phones get updates before branded??
Click to expand...
Click to collapse
Yes normally.
- Branded phones have to have custom firmware (coz they install their own apps/mods/rebuilts)
- Unbranded handsets can apply new firmware as soon as Samsung releases it (without changes).
Hello,
I have a Galaxy S4 with adroid 4.3 and CSC from NEE (Nordic Countries) but I'm living in Spain. I'm wondering if I'm going to get updates via OTA or Kies to 4.4.2. If I try to search for updates in Kies or OTA it says that I have the lastest firmware uptade.
Thanks you!
TehSebaXx said:
Hello,
I have a Galaxy S4 with adroid 4.3 and CSC from NEE (Nordic Countries) but I'm living in Spain. I'm wondering if I'm going to get updates via OTA or Kies to 4.4.2. If I try to search for updates in Kies or OTA it says that I have the lastest firmware uptade.
Thanks you!
Click to expand...
Click to collapse
Dial *#1234# and attach what appears here.
There you go.
TehSebaXx said:
There you go.
Click to expand...
Click to collapse
Problem is that you have wrong baseband for that OTA/KIES tell you have the latest updates.
Steps to follow:
1. Dont use Kies.
2. Use Kies 3 for know ur CSC. In your case its NEE (if its correct).
3. Go HERE for download the latest firmware for ur phone.
4. Flash it through ODIN.
5. When u finish the process of flashing and your system start again, dial *#1234# and have to appear this:
AP: I9505XXUFNB9
CP: I9505XXUFNB9
CSC: I9505NEEFNB2
6. Reflash the firmware if you dont have what appears in the step 5.
7. You will receive the OTA updates now. Good luck :highfive:
Ok thanks you very much!
Hi,
For a couple of days my Galaxy S5 XEF SM-G900F tells me there's and update for the firmware. As my phone was rooted no FOTA were possible so I uninstalled the root. Still no way tu update from OTA.
I tried Kies, but it always stop at 19% (tried on 2 different computers). So ok, back to the only one method that always works : ODIN BUT
Kies tells me that the available version is DA: OC7/CSC: OC2/PHONE: OC7
On sammobile, the only one firmware that has a csc: OC2 is the one for a specific carrier (Bouygues) . Which one should I download and flash to be up to date please ?
Thanks in advance for your help
JB
JB_95 said:
Hi,
For a couple of days my Galaxy S5 XEF SM-G900F tells me there's and update for the firmware. As my phone was rooted no FOTA were possible so I uninstalled the root. Still no way tu update from OTA.
I tried Kies, but it always stop at 19% (tried on 2 different computers). So ok, back to the only one method that always works : ODIN BUT
Kies tells me that the available version is DA: OC7/CSC: OC2/PHONE: OC7
On sammobile, the only one firmware that has a csc: OC2 is the one for a specific carrier (Bouygues) . Which one should I download and flash to be up to date please ?
Thanks in advance for your help
JB
Click to expand...
Click to collapse
i would advise to got to sammobile and got to the G900F firmwares than select the country and carrier your phone is from
the_ziom said:
i would advise to got to sammobile and got to the G900F than select the country and carrier your phone is from
Click to expand...
Click to collapse
Hi,
Thanks for your answer. I did that .. And no firmware is like what Kies shows.
Can someone tell me which I can use ?
JB
JB_95 said:
Hi,
Thanks for your answer. I did that .. And no firmware is like what Kies shows.
Can someone tell me which I can use ?
JB
Click to expand...
Click to collapse
dont use kies
try to download the firmware and than just flash with odin with no kies involved