i just want a stock mja system that im gonna have twrp/cwmr on
01 i would like just the stock kernel mja with only de-knoxed nothing else dont to it its ok if it comes with mja modem but prefer by itself
02 would be great to have a stock mja that has only been de-knoxed or does supersu1.91 take care of all that and i dont need a de-knoxed rom?
thanks
btw i have looked for kernels but i either find completely stock (with knox i believe) or modifeid mja kernels for init.d and overclocking.
thanks again
sorry 1 more thing
i would also like the same for mk2
stock mk2 kernel with no knox and stoc mk2 rom with no knox
You ask for a lot. Flash MJA or MK2 which will come with the stock kernel then denox and debloat yourself.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 03:07 PM ---------- Previous post was at 02:59 PM ----------
http://forum.xda-developers.com/showthread.php?t=2586586
MK2 stock rooted deknoxed and odex/deodexed. And comes with stock kernel.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------
Since it already exisit this is a pointless thread and since XDA is not a support site you can't ask to have a ROM built for your specific needs.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
You ask for a lot. Flash MJA or MK2 which will come with the stock kernel then denox and debloat yourself.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 03:07 PM ---------- Previous post was at 02:59 PM ----------
http://forum.xda-developers.com/showthread.php?t=2586586
MK2 stock rooted deknoxed and odex/deodexed. And comes with stock kernel.
Sent from my SPH-L720 using Tapatalk
---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------
Since it already exisit this is a pointless thread and since XDA is not a support site you can't ask to have a ROM built for your specific needs.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
where did i say can someone "build" me a custom kernel
im saying can i get a "link" to one that is already built
same for the rom for mja
yes i see alot of the mk2 stuff around that shouldnt be to hard to get.
when i asked if someone knew i was thinking there might be one picked over the other that most people like.
for mja de"KNOXED" not "deodex"
there should be a stock rom for mja floating around that has stock kernel (with no selinux (knox) with the rom as the same shouldnt there be?
alot of us just like it stock less security features
en11gma said:
where did i say can someone "build" me a custom kernel
im saying can i get a "link" to one that is already built
same for the rom for mja
yes i see alot of the mk2 stuff around that shouldnt be to hard to get.
when i asked if someone knew i was thinking there might be one picked over the other that most people like.
for mja de"KNOXED" not "deodex"
there should be a stock rom for mja floating around that has stock kernel (with no selinux (knox) with the rom as the same shouldnt there be?
alot of us just like it stock less security features
Click to expand...
Click to collapse
I'm not just talking about the kernel. The whole I want this and this and that.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
I'm not just talking about the kernel. The whole I want this and this and that.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
"I Want" sounds like thats what you are being told alot by someone.
what im saying is "Where Is"
big difference
when i said "i searched" that should be the clue under "Where Is"
not "I Want"
en11gma said:
"I Want" sounds like thats what you are being told alot by someone.
what im saying is "Where Is"
big difference
when i said "i searched" that should be the clue under "Where Is"
not "I Want"
Click to expand...
Click to collapse
"I would like" "I would also like".
Sent from my SPH-L720 using Tapatalk
But not a "PLEASE BUILD ME"
like you said
we all want something....haha
as soon as we come here on these forums we are wanting something
you said "i want someting built"
what you smoking?
en11gma said:
But not a "PLEASE BUILD ME"
like you said
we all want something....haha
as soon as we come here on these forums we are wanting something
you said "i want someting built"
what you smoking?
Click to expand...
Click to collapse
I want this implies that want it lol. If you were just asking you could have said "does someone know if a denoxed ROM with stock kernel exisit somewhere". But instead you said I want X and Y.
Sent from my SPH-L720 using Tapatalk
daniel4653 said:
I want this implies that want it lol. If you were just asking you could have said "does someone know if a denoxed ROM with stock kernel exisit somewhere". But instead you said I want X and Y.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
again you are quoting me "looking" not "Building" anyone with eyes can see that.
why cant you?
you must be having a bad night to keep this going
just admit you were wrong and lets go on
Related
Hello all. Long time flashaholic with the sgs2 and sgs3. I counldnt help myself and bought the S4. Beautiful phone well made with really good battery life. The only problem is that god awful touchwiz ui! I have read and read about rooting this device but have just gotten more and more confused. Can anybody lead me to a site that will have some definitive information about rooting this phone. Knowing me I will be flashing every new rom that comes down the line so I want to get it right. By the way its a i9505 running XXUAMDE in New Zealand.
i9505 cf root
I also do not understand this comment regarding cf-root....
CF-Root is the root for "rooting beginners" and those who want to keep as close to stock as possible. CF-Root is meant to be used in combination with stock Samsung firmwares, and be the quickest and easiest way for your first root.
Would this root method work for aosp roms or something like Paranoid Android?
I would do what I did two days ago.
Download Philz touch .tar for 9505.
Use Odin and flash recovery.
Reboot into recovery and when you reboot from recovery it will prompt you to install su binary.
Done!!
Sent from my GT-I9505 using Tapatalk 2
---------- Post added at 01:27 PM ---------- Previous post was at 01:26 PM ----------
Oh and change /data/media to /data/media/0 in advanced options
Sent from my GT-I9505 using Tapatalk 2
Rooted via cf-auto root and it was a piece of cake! Happily running omega v5 rom!
Sent from my GT-I9505 using xda app-developers app
So I was wondering if I had to reflash back to stock or reflash the AMDL modem. If I wanted to Flash a rom that required my baseband and build to be on the UCUAMDL. I flashed the MF3 Modem (radio) and am running the newest Goldenrom. I have the S4 I3337 ATT version.
Since it appears that you're rooted and have a custom recovery, you do not have to flash back to mdl. You can just download a new rom and follow the ops directions.
jd1639 said:
Since it appears that you're rooted and have a custom recovery, you do not have to flash back to mdl. You can just download a new rom and follow the ops directions.
Click to expand...
Click to collapse
I am rooted and use TWRP. So, even though the "about phone" says I am on a different baseband(MF3), it isn't? I just want to sure. Thanks.
:
no1csme said:
I am rooted and use TWRP. So, even though the "about phone" says I am on a different baseband(MF3), it isn't? I just want to sure. Thanks.
Click to expand...
Click to collapse
You are on mf3 and will stay on that. But it should be compatible with the other roms. I think the reason they say to be on mdl is because mdb won't work. But mf3 is newer and you shouldn't have an issue
But check in the rom's forum to make sure and see if anyone else has flashed with mf3.
Ps, I see you can't post in that forum yet. Which rom are you thinking of using? I'll post the question for you. And, the mf3 rom you're currently using was obtained in the development forum? Do you remember which one?
I had a similar question to this as well... I'm running scoslers rooted mf3 rom. My baseband says mdl and my build says mf3...
Was thinking of flashing kangabean 4.3ge, but it says you must have mdl baseband and mdl build. Says to odin back to mdl before flashing it.
Any thoughts?
Sent from my SAMSUNG-SGH-I337 using xda premium
jd1639 said:
:
You are on mf3 and will stay on that. But it should be compatible with the other roms. I think the reason they say to be on mdl is because mdb won't work. But mf3 is newer and you shouldn't have an issue
But check in the rom's forum to make sure and see if anyone else has flashed with mf3.
Ps, I see you can't post in that forum yet. Which rom are you thinking of using? I'll post the question for you. And, the mf3 rom you're currently using was obtained in the development forum? Do you remember which one?
Click to expand...
Click to collapse
I was originally on Goldenrom and then I updated my modem. I had no issues except for one game which kept giving me problems. I was considering going to the MDOB or Kangabean versions to see if that would fix my issue.
Dandriod7, you should be ok, your baseband is mdl.
No1csme, your baseband is mf3 since you updated the modem. I'll post the question in the kangabean forum for you.
jd1639 said:
Dandriod7, you should be ok, your baseband is mdl.
No1csme, your baseband is mf3 since you updated the modem. I'll post the question in the kangabean forum for you.
Click to expand...
Click to collapse
You are awesome. Thanks for the help.
no1csme said:
You are awesome. Thanks for the help.
Click to expand...
Click to collapse
I've posted it under my Sig there. Look for an answer, hopefully
---------- Post added at 02:42 PM ---------- Previous post was at 02:35 PM ----------
no1csme said:
You are awesome. Thanks for the help.
Click to expand...
Click to collapse
Just got an answer from another guy who's on mf3. He's used kangabean without an issue so it looks like you're good to go.
Thanks for the help jd1639.
Sent from my SAMSUNG-SGH-I337 using xda premium
dandroid7 said:
Thanks for the help jd1639.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
No problem. We're here to help and learn.
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
no1csme said:
I was originally on Goldenrom and then I updated my modem. I had no issues except for one game which kept giving me problems. I was considering going to the MDOB or Kangabean versions to see if that would fix my issue.
Click to expand...
Click to collapse
Don't know if you noticed, but I got an affirmative answer from the creator of the rom himself.
jd1639 said:
No problem. We're here to help and learn.
---------- Post added at 03:05 PM ---------- Previous post was at 02:57 PM ----------
Don't know if you noticed, but I got an affirmative answer from the creator of the rom himself.
Click to expand...
Click to collapse
Thanks again. Appreciate it.
Just to add--I was on scrosler's mf3 rom with mdl radio (baseband). I then flashed the mf3 radio. Since then I have flashed Omega and Wicked while still on the mf3 radio. Generally the radio won't impact flashing different roms. But, as noted, always read OP--
Hi, all i have all of the files you need to make your Galaxy S4 LIKE new (software wise) if you are familiar with odin and know which file goes where then use these files to un-brick or go back to comprlete stock.
this will also fix your recovery if you were someone like me who flashed twrp (dumb idea) it fixes it
https://drive.google.com/file/d/0BxvbskbifwY4d2ZiOEFfLVpHVW8/edit?usp=sharing
good luck and hope you can fix your phone with these files
PS IF THE HAS ALREADY BEEN POSTED SORRY BUT THIS IS A NEWER POST AND I KNOW THEY WORK AND ITS NOT A SCAM.
if you want a custom rom on your phone........if your bricked your phone trying to do that don't look further
http://forum.xda-developers.com/showthread.php?t=2428254
that is the thread for roms and safestrap for noobs
im not responsible if you destroy your phone...........
Never mind
hmmmm
jd1639 said:
Never mind
Click to expand...
Click to collapse
whats the never mind for.......ill delete it if you want..
DyslexicTurtle said:
Hi, all i have all of the files you need to make your Galaxy S4 LIKE new (software wise) if you are familiar with odin and know which file goes where then use these files to un-brick or go back to comprlete stock.
this will also fix your recovery if you were someone like me who flashed twrp (dumb idea) it fixes it
https://drive.google.com/file/d/0BxvbskbifwY4d2ZiOEFfLVpHVW8/edit?usp=sharing
good luck and hope you can fix your phone with these files
PS IF THE HAS ALREADY BEEN POSTED SORRY BUT THIS IS A NEWER POST AND I KNOW THEY WORK AND ITS NOT A SCAM.
if you want a custom rom on your phone........if your bricked your phone trying to do that don't look further
http://forum.xda-developers.com/showthread.php?t=2428254
that is the thread for roms and safestrap for noobs
im not responsible if you destroy your phone...........
Click to expand...
Click to collapse
Thanks for the post - I do have a question, and I apologize if this has already been answered. I got my S4 before the MF3 update. I basically locked it down, and have a custom recovery and it's rooted but stuck in MDL. This means that I never had the OTA upgrade and it never blew that weird fuse. If I odin these tar images onto my phone in its current state, is that safe? I see that there are now processes I can use to re-root my phone and then safestrap into a custom recovery. But since I never had the official MF3 update which blows the fuse permanently, will this not work? Anyone know? Maybe I should just wait for 4.3? Any help or direction is appreciated.
THANKS!
--Q
No your fine where you are just don't do an ota update and safestrap is only meant for mf3 I think u said that you have cwm....that's great don't get ride of it once you get rid of cwm and root and do the ota update then you can use safestrap but u don't need this...you don't need anything on this thread
Sent from my SGH-I337 using xda app-developers app
It works everyone...these files are perfect.im back to stock and rooting again.thanks again dyslexic
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 05:16 PM ---------- Previous post was at 05:05 PM ----------
Don't do the update stay rooted with cwm.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
no problem
jasas212 said:
It works everyone...these files are perfect.im back to stock and rooting again.thanks again dyslexic
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 05:16 PM ---------- Previous post was at 05:05 PM ----------
Don't do the update stay rooted with cwm.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no problem i hope other people find this useful
I just had a question to ask, since I have not found a sound answer on my issue. I have a Verizon galaxy s4 and it is rooted. I want to install a custom rom but I dont know if I need to unlock the bootloader? Also which roms do youll suggest and like?
I think there is a different section for verizon s4
---------- Post added at 08:33 AM ---------- Previous post was at 08:31 AM ----------
You will find ur answeres there
ferndchamp said:
I just had a question to ask, since I have not found a sound answer on my issue. I have a Verizon galaxy s4 and it is rooted. I want to install a custom rom but I dont know if I need to unlock the bootloader? Also which roms do youll suggest and like?
Click to expand...
Click to collapse
There is a separate thread of Knox(so called bootloader) read it. Do you have custom recovery or stock? which method did you used for rooting? pls specify for further guidance.
I am in build mk2. I am using room manager and in that am using clock work recovery. I used this page to root http://forum.xda-developers.com/showthread.php?t=2565758
I think it's a safe root so it says. I am trying to learn little by little any help will be greatly appreciated.
Sent from my SCH-I545 using Tapatalk
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
If you need to ask these questions you should not have rooted. Look in the general forum.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you need to ask these questions you should not have rooted. Look in the general forum.
Click to expand...
Click to collapse
I freely admit that I'm new to this, so no reason to point that out. There are other reasons to root besides flashing custom ROMs, and I don't see any reason why I shouldn't have rooted. Every time I look through threads for my build, people just say that it can't be rooted (which is obviously no longer the case, since I'm successfully rooted). I just want to know what kind of capabilities I should look into, and as I understand it, the best way to do that and start tinkering is by using Safestrap.
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running 4.4.2, Kernel 3.4.0-1125940.
go4bacon said:
I'm running 4.4.2, Kernel 3.4.0-1125940.
Click to expand...
Click to collapse
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's I337UCUFNC1.
go4bacon said:
I think it's I337UCUFNC1.
Click to expand...
Click to collapse
You're on nc1 firmware. Look for this http://forum.xda-developers.com/showthread.php?p=51067706
Sent from my Nexus 5 using XDA Free mobile app
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Make sure you read read read.
After flashing a rom such as Goldeneye inrecovery dont reboot system go back to the home and flash the proper kernel modules and super user.zip. If on golden eye..As far as i know you cannot flash custom kernels
spirodave said:
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Click to expand...
Click to collapse
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
go4bacon said:
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
Click to expand...
Click to collapse
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
Click to expand...
Click to collapse
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
Click to expand...
Click to collapse
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
dude52 said:
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
Click to expand...
Click to collapse
Thought NC1 was 4.4.kklmao on this end now
But good to know ..So SElinux mode changer will fix the safestrap issue on NC1 ?. could have saved me a whole night .. I have been cramming all this info in in one week bieng i just bought this device .. Gues that is what happens reading outdated threads.. Coming from a tmobile gs2 flashing world to this BS locked boot loader has been an experience .. What next your gonna tell me i can install a custom kernel to over clock with this Bl. Can I? lol..No but im serious
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
SELinux Mode Changer fixes SafeStrap for NC1
Guedeaux said:
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
Click to expand...
Click to collapse
Works fine. Just finally rooted my S4 and TWRP backed up without having to wipe/reload/restore anything at all.
TowelRoot + Safestrap-JFLTE-3.72-kk-B01.apk + ModeChanger = easy peasy Root & Restore