Hi all!
I have a stock Samsung GT-I9505 with 4.2.2
Version Info
AP: I9505XXUAMDM
CP: I9505XXUAMDM
CSC: I9505OXXAMDB
I'd like to update to a stock or stockish rom, without Knox bootloader, updating the modem and then rooting.
I've done a lot of reading on the topic but I'm getting somwhat confused as there are so many different methods depending on the version, and if you have Knox. There are also Modem/Wi-Fi issues etc.
Any tips on the method or can someone advise which stock rom/modem to go for?
I'm trying to set out and build up a step by step method that will avoid any complications.
cps_goodbuy said:
Hi all!
I have a stock Samsung GT-I9505 with 4.2.2
Version Info
AP: I9505XXUAMDM
CP: I9505XXUAMDM
CSC: I9505OXXAMDB
I'd like to update to a stock or stockish rom, without Knox bootloader, updating the modem and then rooting.
I've done a lot of reading on the topic but I'm getting somwhat confused as there are so many different methods depending on the version, and if you have Knox. There are also Modem/Wi-Fi issues etc.
Any tips on the method or can someone advise which stock rom/modem to go for?
I'm trying to set out and build up a step by step method that will avoid any complications.
Click to expand...
Click to collapse
Flash Pre-rootedXXUBMGA through Odin and then Install triangle away and reset the binary , and then flash any Custom Recovery via odin and download a Custom 4.3 rom you want then go to recovery do a full wipe and flash the custom rom you downloaded.. Have a nice day.
Repulsa said:
Flash Pre-rootedXXUBMGA through Odin and then Install triangle away and reset the binary , and then flash any Custom Recovery via odin and download a Custom 4.3 rom you want and flash it via recovery. Have a nice day.
Click to expand...
Click to collapse
Thanks for the info! Still reading all I can to avoid mistakes.
After installing a Custom recovery, I take it I don't need to reset the binary anymore? Will search about whether I can flash back the standard recovery.
Would it not be better to install a Pre-rooted and knox-free stock 4.3 rom? Are there any holes to avoid?
cps_goodbuy said:
Thanks for the info! Still reading all I can to avoid mistakes.
After installing a Custom recovery, I take it I don't need to reset the binary anymore? Will search about whether I can flash back the standard recovery.
Would it not be better to install a Pre-rooted and knox-free stock 4.3 rom? Are there any holes to avoid?
Click to expand...
Click to collapse
Well that's how i do it since im still on old bootloader and and doesnt have knox warranty void (I do it from the scratch because i want a fresh install hehe) , anyways you need to root your phone and install a custom recovery and download a 4.3 custom rom and flash it via recovery , once done flashing you need to flash a 4.3 modem in order to prevent a dropping signal issue. Have a nice day.
Repulsa said:
Well that's how i do it since im still on old bootloader and and doesnt have knox warranty void (I do it from the scratch because i want a fresh install hehe) , anyways you need to root your phone and install a custom recovery and download a 4.3 custom rom and flash it via recovery , once done flashing you need to flash a 4.3 modem in order to prevent a dropping signal issue. Have a nice day.
Click to expand...
Click to collapse
Is it possible to flash a stock 4.3 rom (without the bootloader) so I don't have to do a data wipe?
yuuuuuuuu said:
Is it possible to flash a stock 4.3 rom (without the bootloader) so I don't have to do a data wipe?
Click to expand...
Click to collapse
You can flash a custom 4.3 rom but not a stock 4.3 rom since that will give u a newbootloader mate. Im giving you all the tips i can . But feel free either search the forum or wait for some1's opinion. Have a nice day.
Sent from Hell ?
Hi
Im new to Android and got some questions. I ´v been reading but at this point i rather ask.
I got an I9505 Int unbranded model on 4.2.2 (UBMGA) knox free. I would like to try out some roms but be able to revert back to stock for official updates in the future.
I would like to tryout GE of the latest 4.4.2 without knox or locked bootloader is that possible?
Also if its possible to install an official 4.3 TW version without the bloatware?
Just need a push in the right direction.
Thanks
digitalsatan said:
Hi
Im new to Android and got some questions. I ´v been reading but at this point i rather ask.
I got an I9505 Int unbranded model on 4.2.2 (UBMGA) knox free. I would like to try out some roms but be able to revert back to stock for official updates in the future.
I would like to tryout GE of the latest 4.4.2 without knox or locked bootloader is that possible?
Also if its possible to install an official 4.3 TW version without the bloatware?
Just need a push in the right direction.
Thanks
Click to expand...
Click to collapse
You can start rooting your phone and then flash a Custom recovery such as Philz/TWRP/CWM and flash any 4.3 Rom's (Bloatware) you like and make sure its a knoxfree rom. and about 4.4 kitkat it wont work for us Oldbootloader (NOWIFI) since Samsung did not release any kernel source yet . so be patience . Until they relase the Official. Have a nice day.
And If you wanna go back just flash a 4.2.2 Prerooted BMGA stock > Reset binary > Flash a normal Stock 4.2.2
Repulsa said:
You can start rooting your phone and then flash a Custom recovery such as Philz/TWRP/CWM and flash any 4.3 Rom's (Bloatware) you like and make sure its a knoxfree rom. and about 4.4 kitkat it wont work for us Oldbootloader (NOWIFI) since Samsung did not release any kernel source yet . so be patience . Until they relase the Official. Have a nice day.
And If you wanna go back just flash a 4.2.2 Prerooted BMGA stock > Reset binary > Flash a normal Stock 4.2.2
Click to expand...
Click to collapse
Great reply thanks!
digitalsatan said:
Great reply thanks!
Click to expand...
Click to collapse
No worries mate , feel free to ask anything here if you got any problem , and im sure alot of xda member's will try to solve that problem "Btw if your flashing a custom rom via recovery make sure to wipe or follow their instruction in order to prevent any issue .
Repulsa said:
No worries mate , feel free to ask anything here if you got any problem , and im sure alot of xda member's will try to solve that problem "Btw if your flashing a custom rom via recovery make sure to wipe or follow their instruction in order to prevent any issue .
Click to expand...
Click to collapse
is there anyway of updating to the official 4.3 without getting the new bootloader or knox?
digitalsatan said:
is there anyway of updating to the official 4.3 without getting the new bootloader or knox?
Click to expand...
Click to collapse
No. Unless you flash a Knox-free custom ROM, but you can't do it with the official one
Hi there,
I have a Galaxy S4 i9505 with official Samsung 4.3 Stock ROM from a different country which I had flashed using ODIN a while ago. I already have my knox counter tripped to 0x1 because I had also installed custom recovery and rooted.
Would I be able to flash CM11 (Android Version 4.4) on to this and then if I don't like it or want to return back to this exact version I have now by a Nandroid backup, could I?
I have searched around and can't seem to find the answer and want to get rid of Touchwiz (like nearly everyone else)
Baseband Version: i9505XXUEMK8
Build Number: JSS15J. I9505XXUEMK8
Thank you in advance
LimitedStreak said:
Hi there,
I have a Galaxy S4 i9505 with official Samsung 4.3 Stock ROM from a different country which I had flashed using ODIN a while ago. I already have my knox counter tripped to 0x1 because I had also installed custom recovery and rooted.
Would I be able to flash CM11 (Android Version 4.4) on to this and then if I don't like it or want to return back to this exact version I have now by a Nandroid backup, could I?
I have searched around and can't seem to find the answer and want to get rid of Touchwiz (like nearly everyone else)
Baseband Version: i9505XXUEMK8
Build Number: JSS15J. I9505XXUEMK8
Thank you in advance
Click to expand...
Click to collapse
Yes you can easily return back to the saved nandroid backup you have in recovery
I first started on cm11 before picking a daily ROM that was suitable for me
Happy flashing
11calcal said:
Yes you can easily return back to the saved nandroid backup you have in recovery
I first started on cm11 before picking a daily ROM that was suitable for me
Happy flashing
Click to expand...
Click to collapse
I have read somewhere that if the build number is updated then you cannot downgrade or something?
Was yours a knox enabled rom and have you tried going back to it?
LimitedStreak said:
I have read somewhere that if the build number is updated then you cannot downgrade or something?
Was yours a knox enabled rom and have you tried going back to it?
Click to expand...
Click to collapse
Apparently once you update to 4.4.2 you can't downgrade to 4.3 but IMHO why you would want to go back is beyond me ? Mine was on Knox after 4.3 ota but took the plunge & glad I did & wouldn't need to go back to an outdated OS. My baseband has stayed mk9 even after trying a few ROMs & love the smoothness of Google edition ROMs over cm11
I would suggest making the move over to kk & trying a few ROMs out there.
11calcal said:
Apparently once you update to 4.4.2 you can't downgrade to 4.3 but IMHO why you would want to go back is beyond me ? Mine was on Knox after 4.3 ota but took the plunge & glad I did & wouldn't need to go back to an outdated OS. My baseband has stayed mk9 even after trying a few ROMs & love the smoothness of Google edition ROMs over cm11
I would suggest making the move over to kk & trying a few ROMs out there.
Click to expand...
Click to collapse
I have been on CM10.1 before and the only reason I went back to Touchwiz was because there was bugs with it and that's the same reason I might want to go back if I flash it now so I just want to be sure
I was thinking that if I update and my baseband/build number stay the same then I might be able to downgrade again if I wanted to later?
Absolutely hate Touchwiz right now but everything works too
LimitedStreak said:
I have been on CM10.1 before and the only reason I went back to Touchwiz was because there was bugs with it and that's the same reason I might want to go back if I flash it now so I just want to be sure
I was thinking that if I update and my baseband/build number stay the same then I might be able to downgrade again if I wanted to later?
Absolutely hate Touchwiz right now but everything works too
Click to expand...
Click to collapse
I wouldn't like to say that if baseband stays same that you could go back for sure ? Touchwiz is just too bloated IMO that's why I decided on a custom ROM ?
I found cm11 okay but feel that kk GE is so much fluid :highfive:
I think it isn't possible to go from a knox-enabled rom to one without knox?
So I have knox-enabled 4 right now and guessing when I go on CM11 it'll still be there so when I try to downgrade I should be able to?
As it's not going from 4.3 (knox-enabled) to 4.2 (knox-disabled) but from 4.4 (knox-enabled?) to 4.3 (knox-enabled)
I'm not really sure but can someone give us some help .
11calcal said:
I wouldn't like to say that if baseband stays same that you could go back for sure ? Touchwiz is just too bloated IMO that's why I decided on a custom ROM ?
I found cm11 okay but feel that kk GE is so much fluid :highfive:
Click to expand...
Click to collapse
So you was able to go from one CM11 to GE which both are on 4.4?
I think I'll update to stock 4.4 and then from there create another nandroid and move about ROMs? Would that work?
LimitedStreak said:
So you was able to go from one CM11 to GE which both are on 4.4?
I think I'll update to stock 4.4 and then from there create another nandroid and move about ROMs? Would that work?
Click to expand...
Click to collapse
Yes initially I was on stock 4.3 then went on cm11 for a week or so then started trying out GE ROMs ?
If I needed to go back to official stock (warranty) I would just find & flash 1 through Odin :fingers-crossed:
11calcal said:
Yes initially I was on stock 4.3 then went on cm11 for a week or so then started trying out GE ROMs ?
If I needed to go back to official stock (warranty) I would just find & flash 1 through Odin :fingers-crossed:
Click to expand...
Click to collapse
If you needed to go back would you go back to an official 4.4 or 4.3 then?
Do you think it would be a good idea to just titaniumbackup everything and Nandroid and flash cm11 and so if there are any problems I could just flash stock 4.4 and install all the apps back via titanium backup?
Would there be a problem with the bootloader?
LimitedStreak said:
If you needed to go back would you go back to an official 4.4 or 4.3 then?
Do you think it would be a good idea to just titaniumbackup everything and Nandroid and flash cm11 and so if there are any problems I could just flash stock 4.4 and install all the apps back via titanium backup?
Would there be a problem with the bootloader?
Click to expand...
Click to collapse
If I needed to go official I would flash back to 4.3 as that's what I'm meant to be on.
Always make a backup before flashing that way you can reinstall.
Can't see a problem with bootloader even if you had to flash official I would just use chainfire to gain recovery/root again ?
11calcal said:
If I needed to go official I would flash back to 4.3 as that's what I'm meant to be on.
Always make a backup before flashing that way you can reinstall.
Can't see a problem with bootloader even if you had to flash official I would just use chainfire to gain recovery/root again ?
Click to expand...
Click to collapse
But this new knox thing on the S4 means you can't downgrade the bootloader or something. So I think going from 4.4 to 4.3 is downgrading the bootloader? And so would risk bricking your device which is why I don't want to attempt it unless someone has done it and had to problem
LimitedStreak said:
But this new knox thing on the S4 means you can't downgrade the bootloader or something. So I think going from 4.4 to 4.3 is downgrading the bootloader? And so would risk bricking your device which is why I don't want to attempt it unless someone has done it and had to problem
Click to expand...
Click to collapse
You are already on the new bootloader with Knox triggered so there is no downgrading to old bootloader.
You are safe to stay on 4.3 but if you put 4.4 or cm11 on your phone you may not be able to go back to an earlier version?
Hi, I hope I can clear something here. If you are on stock 4.3, rooted and Knox 0x1, you can flash cm and you can restore your 4.3 backup. If you once triggered your Knox to 0x1, it's not possible to get it back to 0x0.
If you flash a stock Samsung 4.4.2 KitKat with the new KitKat bootloader, you can restore any custom 4.3 ROM. You can not flash a 4.3 stock ROM with Odin once you are on the KitKat bootloader. In this case you have to flash a stock KitKat ROM.
Another thing: if you now are on a 4.3 bootloader and you flash a 4.4 ROM, it could break wifi. But there are fixes possible with editing the build.prop.
So fact is, no matter what ever you do, if your Knox is already 0x1, it's not possible to get back to 0x0.
speedwayfan75 said:
Hi, I hope I can clear something here. If you are on stock 4.3, rooted and Knox 0x1, you can flash cm and you can restore your 4.3 backup. If you once triggered your Knox to 0x1, it's not possible to get it back to 0x0.
If you flash a stock Samsung 4.4.2 KitKat with the new KitKat bootloader, you can restore any custom 4.3 ROM. You can not flash a 4.3 stock ROM with Odin once you are on the KitKat bootloader. In this case you have to flash a stock KitKat ROM.
Another thing: if you now are on a 4.3 bootloader and you flash a 4.4 ROM, it could break wifi. But there are fixes possible with editing the build.prop.
So fact is, no matter what ever you do, if your Knox is already 0x1, it's not possible to get back to 0x0.
Click to expand...
Click to collapse
Hi there and thanks for your help but could I clear this up
You said 'If you are on stock 4.3, rooted and Knox 0x1, you can flash cm and you can restore your 4.3 backup.'
I am on stock 4.3, did you mean CM10.1 (Android 4.3) or CM11 (Android 4.4)? And if CM11 then that would mean I could go to android 4.4 and then back down to 4.3 stock if I wanted?
And flashing a KitKat ROM on 4.3 ROM would give me that wifi problem?
So do you think I should flash stock 4.4 using Odin and then flash CM11.. and then if wanted I could just go back to stock 4.4? Would there be a change in bootloader between 4.4 roms?
Hope you understood this, thanks again
LimitedStreak said:
Hi there and thanks for your help but could I clear this up
You said 'If you are on stock 4.3, rooted and Knox 0x1, you can flash cm and you can restore your 4.3 backup.'
I am on stock 4.3, did you mean CM10.1 (Android 4.3) or CM11 (Android 4.4)? And if CM11 then that would mean I could go to android 4.4 and then back down to 4.3 stock if I wanted?
And flashing a KitKat ROM on 4.3 ROM would give me that wifi problem?
So do you think I should flash stock 4.4 using Odin and then flash CM11.. and then if wanted I could just go back to stock 4.4? Would there be a change in bootloader between 4.4 roms?
Hope you understood this, thanks again
Click to expand...
Click to collapse
If you want 4.4, you can flash the stock Samsung package including the newest bootloader and modem. Wifi and everything else will work then. Once you are on the 4.4 bootloader, you can switch between all 4.4 ROMS, stock or custom. You be able to Odin flash the stock Samsung 4.4 ROM again. But you can not flash a STOCK SAMSUNG 4.3 ROM again. 4.3 CUSTOM Rom is possible.
Remember: if you flash the Samsung stock 4.4 package, you have to root and flash a custom recovery before you can flash cm11 I suggest TWRP 2.6.3.1, works perfect.
speedwayfan75 said:
If you want 4.4, you can flash the stock Samsung package including the newest bootloader and modem. Wifi and everything else will work then. Once you are on the 4.4 bootloader, you can switch between all 4.4 ROMS, stock or custom. You be able to Odin flash the stock Samsung 4.4 ROM again. But you can not flash a STOCK SAMSUNG 4.3 ROM again. 4.3 CUSTOM Rom is possible.
Remember: if you flash the Samsung stock 4.4 package, you have to root and flash a custom recovery before you can flash cm11 I suggest TWRP 2.6.3.1, works perfect.
Click to expand...
Click to collapse
Understood, Thank you!
Hmm, would I need to delete data and stuff when flashing stock 4.4? If it does, titaniumbackup backup/restore should work fine?
I will flash twrp custom recovery using odin but how about a root? Which root works on 4.4 with knox?
Thanks
LimitedStreak said:
Understood, Thank you!
Hmm, would I need to delete data and stuff when flashing stock 4.4? If it does, titaniumbackup backup/restore should work fine?
I will flash twrp custom recovery using odin but how about a root? Which root works on 4.4 with knox?
Thanks
Click to expand...
Click to collapse
Try CFautoroot first. Then recovery. Restore most of your data with titanium should work. But don't restore any system apps.:good:
guys i am having note 3
i denoxed
now i am not able to update to official 4.4.2
what do i do
can i revert back
please kindly tell the correct sugesstion
one more thing
if ive denoxed so can i flash custom rom ???like cm 11 or something like that
re: upgrading
freakzapster said:
guys i am having note 3
i denoxed
now i am not able to update to official 4.4.2
what do i do
can i revert back
please kindly tell the correct sugesstion
if ive denoxed so can i flash custom rom ???like cm 11 or something like that
Click to expand...
Click to collapse
You cannot downgrade from 4.4.2 to 4.3 and if you have a 4.3
nandroid backup you cannot restore it either.
You will only be able to upgrade or flash 4.4.2 roms and newer
versions of android roms/firmwares.
Oh, one more thing there is no such thing as "denox" LOL
Good luck!
Misterjunky said:
You cannot downgrade from 4.4.2 to 4.3 and if you have a 4.3
nandroid backup you cannot restore it either.
You will only be able to upgrade or flash 4.4.2 roms and newer
versions of android roms/firmwares.
Oh, one more thing there is no such thing as "denox" LOL
Good luck!
Click to expand...
Click to collapse
buddy i want to know can i flash stock 4.4.2 through odin if i have unlocked knox thing coz its showing custom in recovery
or will i be able to flash custom rom for 4.4.2
freakzapster said:
buddy i want to know can i flash stock 4.4.2 through odin if i have unlocked knox thing coz its showing custom in recovery
or will i be able to flash custom rom for 4.4.2
Click to expand...
Click to collapse
Yeah you can flash Stock via ODIN or you can install CWM/TWRP and use a custom recovery. -- Make sure REACTIVATION LOCK is OFF before you do anything or it won't work.
I'm on stock android 4.3,rooted with a tripped knox.
Will my bootloader always be 4.3 until I flash official kitkat rom?
Will/can custom KK roms change my bootloader?
Thanks
You have to upgrade bootloader through Odin if you want to flash kk custom ROMs. Custom ROMs doesn't contain bootloader as far as I know.
So yes, your bootloader will be 4.3 until you flash 4.4 with Odin.
Sent fra min SM-N9005 via Tapatalk
MystaMagoo said:
I'm on stock android 4.3,rooted with a tripped knox.
Will my bootloader always be 4.3 until I flash official kitkat rom?
Will/can custom KK roms change my bootloader?
Thanks
Click to expand...
Click to collapse
There are some custom ROMs that provide links to JUST the bootloader itself, which you can flash by yourself in Odin, without flashing stock ROM.
Thanks for that guys but I don't want to change my bootloader,want to keep it as JB.
I tried a few KK roms and experienced problems with them,was just wondering if it was because I had JB BL.
I need to find a custom rom with JB BL now.................
Thanks