Database Users

[Q] where to start? clockword recovery mod etc

Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick

seventje84 said:
Hi there guys,
I've been used to flashing android devices in the past (+2 years ago), but I don't have much experience with it nowadays.
first my current situation:
-I'm running MJ7 atm, rooted with kingo
i'm looking fo flash note's 3 4.4.2 kitkat rom, or omega rom, or cm11
If I understood correctly:
1) install a clockwork mod recovery for my 9005
> what "image" do I use for that? clockwork mod recovery doesn't have the note 3 9005 in it's list
2) install another rom through clockwork mod recover?
I've already tried looking for answers on this forum, but either they aren't for my specific device, or it doesn't explain the steps
Any suggestions guys?
The custom recovery is needed because... samsung's recovery is limited or something?
Trying to find answers to these questions!
In case I overlooked some topics, feel free to point me towards them!
Thanks in advance!
Nick
Click to expand...
Click to collapse
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.

radicalisto said:
OK, so before you flash you need to know that if you upgrade to 4.4.2 Official your bootloader upgrades and you cannot use CM nor can you go back to 4.3. SO you need to decide which you'd prefer to do.
As for recovery, yes you need a custom recovery to flash a custom mod. -- CWM by Chenglu is the only recovery that currently works on Kitkat 4.4.2.
TWRP/PhilZ/CWM work on 4.3 - so you can flash anything up until MK/ML*
CM11/OMEGA/CRASH/ALLIANCE etc all run on Mj7/MK2-3/ML2 currently so are compatible with your 4.3 build
Since you rooted via Kingo, is your KNOX preserved? because installing a custom recovery will void this.
Click to expand...
Click to collapse
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?

seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
1- Yup, once you get the new bootloader you can't downgrade, you can however flash ROMS which are created with this new bootloader, so far SweetROM, AndroidNow NG and(soon to be coming) AllianceROM are NA6 compatible.
2-CM was built on the old BL source, it'll probably eventually get updated to NA6 BL at some point, but for now it's based on MJ7 BL.
3/4- Yup if you are EU like myself, then KNOX warranty means nothing to us, I was just confirming you were aware of this
-- CWM has to be installed via ODIN, takes 20seconds to flash via PDA option in ODIN 1.85. CWM will be your main base recovery and you can install/wipe/mount etc as and when you need to.
*Side note, my advice, stick with your current bootloader and avoid the new kitkat bootloader, install CWM and flash in temasek's CM build and custom kernel. It's a fantastic build! just need to install the gAPPS to get Playstore and google apps etc - also Official Nightlies have been announced and are live by CM**
Any other queries just post away :good:

seventje84 said:
First of all, I want to thank you for the swift response!
So basically:
-once I flash original 4.4.2 I get a new bootloader and I cannot install a different rom except stock one atm?
-If I flash CM11/Omega etc it's no issue.. Any idea why though? CM11 is also 4.4.2 based.. but it doesn't come with new restrictive bootloader I suppose?
-I rooted through kingo, and during boot I don't see any special "text", so I suppose my knox is preserved
-about the "voiding", I found a piece of text in the european law here about rooting and voiding warranty that will help me if I ever needed that warranty
-Question about CMW recovery: If I install it from the play store, what kind of "recovery" do I need to install? is there a Database for that or some sort?
Click to expand...
Click to collapse
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app

Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe. Currently running Androidnow but after 1 day it seems that I have some forced reboots. Don't know where it comes from. I guess it's because I installed the rom from external sd.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's

radicalisto said:
Did you dirty flash? - try another ROM, that may be a little buggy... However I suspect you didn't do a full wipe and that's the issue with the FC's
Click to expand...
Click to collapse
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app

Koumorisword said:
I did the Cwm based Phil "prepare for other rom" wipe. Manual wipe would be better you think?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nope, that wipe should be enough. Probably a buggy ROM. Try another and see if you have any issues.

Koumorisword said:
Where do we find that piece of law? Im just curious since I'm also knox 0x1 Hehe.
Click to expand...
Click to collapse
You want to look for EU Directive 1999/44/CE
http://matija.suklje.name/rooting-and-flashing-your-device-does-not-void-the-warranty-in-eu

have i missed anything!?

have i missed anything!!!???
i'm a noob to this. here's what i'm planning on doing when my i9505 arrives...
1. root device
2. install goo mgr/twrp recovery
3. backup stock rom
4. back up efs with efs pro
5. flash bootloader and modem from wanam
6. flash wanamlite rom
7. (if neccessary) flash O2 modem
anything i've missed out? cheers

reg66 said:
have i missed anything!!!???
i'm a noob to this. here's what i'm planning on doing when my i9505 arrives...
Click to expand...
Click to collapse
Remember flashing a custom rom/rooting will void your warranty.
1/4 all good .
5. No need to flash the latest bootloader only modem . Since we already have custom kernel. But its up to u.
6. Full wipe.
7.flash wanam
8. Chexk sammobile/ what modem you need base from your country/ provider.
...

deleted

Repulsa said:
Remember flashing a custom rom/rooting will void your warranty.
1/4 all good .
5. No need to flash the latest bootloader only modem . Since we already have custom kernel. But its up to u.
6. Full wipe.
7.flash wanam
8. Chexk sammobile/ what modem you need base from your country/ provider.
...
Click to expand...
Click to collapse
should i not do a full wipe before flashing modem/bootloader, or does it not matter either way?

reg66 said:
should i not do a full wipe before flashing modem/bootloader, or does it not matter either way?
Click to expand...
Click to collapse
If you flash the modem using Odin, then you don't need to wipe anything or lose any data, I wouldn't bother flashing the bootloader.

gsmyth said:
If you flash the modem using Odin, then you don't need to wipe anything or lose any data, I wouldn't bother flashing the bootloader.
Click to expand...
Click to collapse
thanks. sorry, but is there any reason why i shouldn't bother flashing bootloader, only wanam says to before flashing his rom

reg66 said:
thanks. sorry, but is there any reason why i shouldn't bother flashing bootloader, only wanam says to before flashing his rom
Click to expand...
Click to collapse
Well it depends what your phone is running out of the box, but the main reason is if you're phone happens to be on a pre-Knox (4.2.2) bootloader, its best to avoid updating to a newer one as once you have it you can't downgrade it. Or you will trip the Knox warranty when rooting/flashing recovery/custom ROMs.
So a check before updating/flashing anything is best, you can boot into download mode and check for a line that says 'knox 0x0'. If its there that means you have the Knox bootloader already, if not you're on the old one.
I'm still running the bootloader from I9505XXUBMGA firmware and so Im Knox free and can continue to flash custom ROMs (currently on custom stock based 4.4.2 rom) and revert back to full stock I9505XXUBMGA firmware if needed (so my device can be returned to out of the box state for warranty purposes). I only update the modem when needed, usually after there is a version or other significant change.

gsmyth said:
Well it depends what your phone is running out of the box, but the main reason is if you're phone happens to be on a pre-Knox (4.2.2) bootloader, its best to avoid updating to a newer one as once you have it you can't downgrade it. Or you will trip the Knox warranty when rooting/flashing recovery/custom ROMs.
So a check before updating/flashing anything is best, you can boot into download mode and check for a line that says 'knox 0x0'. If its there that means you have the Knox bootloader already, if not you're on the old one.
I'm still running the bootloader from I9505XXUBMGA firmware and so Im Knox free and can continue to flash custom ROMs (currently on custom stock based 4.4.2 rom) and revert back to full stock I9505XXUBMGA firmware if needed (so my device can be returned to out of the box state for warranty purposes). I only update the modem when needed, usually after there is a version or other significant change.
Click to expand...
Click to collapse
cool, thanks. bought the phone off of ebay though, so warranty is not an issue. cheers again

reg66 said:
cool, thanks. bought the phone off of ebay though, so warranty is not an issue. cheers again
Click to expand...
Click to collapse
No worries, check back here once you get it if you have any more questions as there is always someone to here help. :highfive:

gsmyth said:
No worries, check back here once you get it if you have any more questions as there is always someone to here help. :highfive:
Click to expand...
Click to collapse
cheers fella

[Q] How can I delete all traces of custom ROM installations?

I need to service my device due to GPS problems.
Warranty would be most probably void if they find any traces of custom ROM installations.
I've install stock original stock ROM using ODIN.
As far as I know No Knox was ever installed on my device.
Would the lab be able to discover any traces of custom ROM installations?
How can I check that?
Thanks!

amir77a said:
I need to service my device due to GPS problems.
Warranty would be most probably void if they find any traces of custom ROM installations.
I've install stock original stock ROM using ODIN.
As far as I know No Knox was ever installed on my device.
Would the lab be able to discover any traces of custom ROM installations?
How can I check that?
Thanks!
Click to expand...
Click to collapse
Hi mate,
go to download mode if there is no mention at all of knox , then you are knox free ...your warranty is ok , if there is any mention of knox there check if the knox bit is set to 0x1 if so your warranty bit is set., if not then you are ok

I have always careful to install only Knox free ROMS, so no Knox mention at all.
The stock ROM is Android 4.2.2 prior to Knox.
Will they be able to find somehow any other traces of those ROM's ?

amir77a said:
I have always careful to install only Knox free ROMS, so no Knox mention at all.
The stock ROM is Android 4.2.2 prior to Knox.
Will they be able to find somehow any other traces of those ROM's ?
Click to expand...
Click to collapse
hi,
If you flashed rom with Odin , and you kept your bootloader at all times in 4.2.2 and there are no traces at download mode.....they will not find out

I did flashed with Odin, but I don't know if I kept the bootloader in 4.2.2 at all times.
In the past the custom ROM's were 4.4.3, but after the Odin stock ROM flashing, I never installed in ROM/bootloader/root etc. Is that suffice?

amir77a said:
I did flashed with Odin, but I don't know if I kept the bootloader in 4.2.2 at all times.
In the past the custom ROM's were 4.4.3, but after the Odin stock ROM flashing, I never installed in ROM/bootloader/root etc. Is that suffice?
Click to expand...
Click to collapse
If you flashed a 4.2.2 stock rom with odin and had no errors at all and settings /about device shows a 4.2.2 rom then you have a 4.2.2 bootloader...there is no way to flash a older bootloader on top of a newer one....

I did flash stock ROM with Odin, and had no errors at all, and the about device shows a 4.2.2, BUT I had several ROMs with 4.4.3, such as Omega, and also Philz touch CWM.
So it seems that I was able to flash older bootloader over newer one. Am I wrong?
Sorry if I'm asking to much questions.. just trying to understand that.
Thanks again!

amir77a said:
I did flash stock ROM with Odin, and had no errors at all, and the about device shows a 4.2.2, BUT I had several ROMs with 4.4.3, such as Omega, and also Philz touch CWM.
So it seems that I was able to flash older bootloader over newer one. Am I wrong?
Sorry if I'm asking to much questions.. just trying to understand that.
Thanks again!
Click to expand...
Click to collapse
no problem
Custom roms do not have bootloaders only stock roms , there is no way ( yet) to flash a 4.22 bootloader on top of a 4.3 bootloader...so if you have right now a stock 4.2.2 firmware you never flashed a 4.3 bootloader
Omega never have bootloaders in their rom

OK got it!
I never flash stock 4.3.x ROM, hence bootloader remains 4.2.2.
Thanks so much!

[Q] (Noob?) question - stock 4.3 to custom 4.4 rom

I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.

_Noctis_ said:
I've been trying to figure this out for the last day, with no success.
I've got a rooted Note 3 N9005 (MJ7) stock. this is a 4.3 Rom. Knox status is0x0 (didn't trip it when I've rooted it ages ago).
I had enough of sammy rom, and I want to play with some of the new 4.4.4 custom roms.
I'm totally and utterly lost regarding what's tripping knox, and what are the needed steps in order to achieve that.
From what I understand, flashing TWRP (or any other custom recovery) will trip knox. I'm fine with that.
I'm not sure if I'm supposed to first upgrade my 4.3 to an official 4.4.2, and what / if is all the lock/unlock bootloader which seems to differ between versions (4.3 and 4.4). There also seem to be different versions of TWRP depending on if you're on 4.3 or 4.4?
Can I simply flash TWRP on my rooted 4.3, backup, flash new shinny 4.4.4 rom, and be happy ? Will that keep the root ?
Otherwise, do i need to upgrade to official 4.4.2 version first? will that lose root and I'll have to reroot the new version, and then flash TWRP and then flash 4.4.4 roms?
Any kind of help (or point me to an article that discusses it, even though I didn't find any, and i've searched) will be highly appreciated.
Cheers and thanks in advance.
Click to expand...
Click to collapse
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.

radicalisto said:
If you aren't concerned about KNOX, upgrade to a 4.4 ROM (Official) via ODIN which will upgrade the bootloader, then once that's all done, flash TWRP for 4.4 then download your ROMs and flash via TWRP as normal.
Click to expand...
Click to collapse
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers

_Noctis_ said:
Not concerned any more ...
Out of curiosity, what exactly kills the root? flashing a rom doesn't. upgrading via odin ? I'm assuming it has nothing to do with the system/cache, since each flash usually wipes them, so, where does it live?
Cheers
Click to expand...
Click to collapse
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.

radicalisto said:
Reflashing the ROM back to stock is what kills root. It's easy to re-root again once you've tripped KNOX anyways.
But tbh, once you install a custom recovery after you've upgraded your boot loader, you won't need to root. It isn't required for custom recovery
Sent from my Spectrum ZX +2
EDIT: Have you used ODIN to flash stock images before? If not, have a read around, it's pretty straight forward though.
Click to expand...
Click to collapse
I see ... so -> flash stock (kills root) -> flash TWRP (trips knox) -> flash custom rom without worrying about root ? (wouldn't i need it for titanium backup ,or do custom roms come with SU preinstalled?)
Yep, used odin. file on comp, download mode, couple of ticks, clicky clicky, happiness ensues ...

Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2

radicalisto said:
Yeah you're pretty much spot on. Yeah most ROMs are pre-rooted and if they aren't you can just flash superSU via your recovery. But you should be good to go and know what you're doing by the sounds of it.
Enjoy flashing them ROMs and make an efs backup and store off the device too. There's an adb script for it here (forget where but its here, development thread I think) don't use any apps from the play store as they are notorious for bricking Samsung devices.
Sent from my Spectrum ZX +2
Click to expand...
Click to collapse
lol ...notorious for bricking samsung devices ... i like it ...
i ran one already (zipped a 6MB and a 14.5MB image and tar into a 300kb zip), and been told you can do that from inside TWRP as well ...
I'll take a deep breath, and start downloading the official image and roms ...
I'll update if i'll get to the other side

out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?

_Noctis_ said:
out of curiosity ... does it matter which official 4.4.2 image i'm flashing ? (i'm getting the NZ one ...but i assume they should all be similar, and / or that it doesn't matter since i'll be flashing something else on it anyways, right ?
Click to expand...
Click to collapse
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc

radicalisto said:
Yeah try and keep to the country your device is from, otherwise you have to find the right PIT file, and the partitions vary etc
Click to expand...
Click to collapse
Rubbish. ..I don't recall seeing an australian one... I'll have another look, otherwise ill look into the pit thingy. Thanks.

[Q] As a first timer on samsung what do i need to do ?

Hey guys i just bought this international exynos note 3 (N900) and i have some questions about it ;
1. I want to install all the roms kernels and mods i could find but in order to do that (I'm %100 stock btw) ,do i need to first unlock the device ( i dont know how i couldnt find it), then root it with CF- Auto root( my warranty is over so i dont need to think about KNOX i think??) Then use the dd method to flash a recovery and flash whatever i want. Am i right about the things i said on all above ? Is there an easier way to do it ?
2. Do KNOX ever prevents me from flashing things in ODIN if something gets triggered ?
3. If i am not right about the first question starting from %100 stock what do i need to do to get this baby rockin ? I'm thinking about flashing a stock lollipop rom with a custom kernel and root ofc. Any suggestions ?
4. Do we need to flash modems from odin ? Because when reading the AryaMods thread i saw something about updating the modem. I'm on 4.4.2 right now. Can we flash modems or even kernels from recovery ?
Thanks already!!

ymcc said:
Hey guys i just bought this international note 3 and i have some questions about it ;
1. I want to install all the roms kernels and mods i could find but in order to do that (I'm %100 stock btw) ,do i need to first unlock the device ( i dont know how i couldnt find it), then root it with CF- Auto root( my warranty is over so i dont need to think about KNOX i think??) Then use the dd method to flash a recovery and flash whatever i want. Am i right about the things i said on all above ? Is there an easier way to do it ?
2. Do KNOX ever prevents me from flashing things in ODIN if something gets triggered ?
3. If i am not right about the first question starting from %100 stock what do i need to do to get this baby rockin ? I'm thinking about flashing a stock lollipop rom with a custom kernel and root ofc. Any suggestions ?
4. Do we need to flash modems from odin ? Because when reading the AryaMods thread i saw something about updating the modem. I'm on 4.4.2 right now. Can we flash modems or even kernels from recovery ?
Thanks already!!
Click to expand...
Click to collapse
Care to mention what model?

kenny1991 said:
Care to mention what model?
Click to expand...
Click to collapse
Sorry my bad it's a N9000 Exynos device.
Thanks !

ymcc said:
Sorry my bad it's a N9000 Exynos device.
Thanks !
Click to expand...
Click to collapse
There is no much of roms to choose for this one. 9005 is most supported here.
Root using cf auto root.
Make back up of ta partion/imei.
Flash recovery with odin. Then flash roms in twrp (watch the ere about how to use twrp or YT).
flash stock roms using odin.

Can't i just flash recovery from odin then flash a custom rom after that without rooting ? Thanks!

ymcc said:
Can't i just flash recovery from odin then flash a custom rom after that without rooting ? Thanks!
Click to expand...
Click to collapse
If you are going to flash roms based on lollipop, update your phone to latest stock rom for your model using odin so you get latest bootloader.
Dude, you need root access to access system and write to it. Don't custom roms require root, if you take a look? (don't answer to this [emoji61] )
If you want that way, flash twrp with ? odin. Then flash supersu for your model using twrp. That way too you get root. Then flash roms after (read rom instructions).
Ask if all wondering. ?
?

kenny1991 said:
If you are going to flash roms based on lollipop, update your phone to latest stock rom for your model using odin so you get latest bootloader.
Dude, you need root access to access system and write to it. Don't custom roms require root, if you take a look? (don't answer to this [emoji61] )
If you want that way, flash twrp with odin. Then flash supersu for your model using twrp. That way too you get root. Then flash roms after (read rom instructions).
Ask if all wondering.
Click to expand...
Click to collapse
No my question was; not rooting the device in the first place before flashing the recovery and the rom. The roms already comes with the root in it. So just to be clear first upgrade the base to lollipop from odin then flash a recovery and lastly flash a lollipop rom. Would this be your sequence when you just bought a new note 3 ?

ymcc said:
No my question was; not rooting the device in the first place before flashing the recovery and the rom. The roms already comes with the root in it. So just to be clear first upgrade the base to lollipop from odin then flash a recovery and lastly flash a lollipop rom. Would this be your sequence when you just bought a new note 3 ?
Click to expand...
Click to collapse
Flash latest firmware then custom recovery then flash the custom rom of your choice. No need to root after flash official firmware but it's good to root first as you may want to backup efs before you start messing the phone. I backed up the efs for the past 1.5years but so far never need it.
Sent from my SM-N9005

Rosli59564 said:
Flash latest firmware then custom recovery then flash the custom rom of your choice. No need to root after flash official firmware but it's good to root first as you may want to backup efs before you start messing the phone. I backed up the efs for the past 1.5years but so far never need it.
Sent from my SM-N9005
Click to expand...
Click to collapse
Thanks you very much mate!
Edit: I couldn't find the 5.0 version for my device the latest one is 4.4.2 for SM-N900Q. But there are 5.0 versions for SM-N900 for india and such. Can i flash one of them ? Does it interfere with anything so like just for a base ?

ymcc said:
Thanks you very much mate!
Edit: I couldn't find the 5.0 version for my device the latest one is 4.4.2 for SM-N900Q. But there are 5.0 versions for SM-N900 for india and such. Can i flash one of them ? Does it interfere with anything so like just for a base ?
Click to expand...
Click to collapse
Then it's the latest. Don't flash other variants roms cause it will brick your ?.

kenny1991 said:
Then it's the latest. Don't flash other variants roms cause it will brick your .
Click to expand...
Click to collapse
Ok. Thank you !